Download Series Battery Switches

e-Series Battery Switches
350 Amperes Continuous Rating for small inboard gasoline or diesel engines
Rated the top standard-duty switch by Powerboat Reports (June 2005)***
Tactile textures indicate knob
position by feel only
Ignition protected Safe for installation
aboard gasoline
powered boats
7/8” (22.22mm) stud length to
accept multiple cable terminals
Fits all Perko and
Guest low amperage
battery switch hole
patterns
Accepts up to
4/0 AWG
Luminous label for
low light reading
95mm2
battery cables
9001 - 9002
3/8”-16 (M10) Tin-plated
copper studs for
maximum conductivity
and corrosion resistance
Case design permits
surface or rear
panel mounting
Superior Stud Design
Blue Sea Systems One Piece Stud
Common Two Piece Stud
1/2” stud
length
7/8” stud
length
• AFD (Alternator Field Disconnect) feature on 9002e and 9004e models
• Meets all American Boat and Yacht Council (ABYC) requirements for battery switches
• Make-before-break contact design on 9001e and 9002e models allows switching
between battery banks without power interruption
Nut may
loosen
with
vibration
Cold
pressed
terminal
PN
9001e
9002e
9003e
9004e
5510e
5511e
Un-plated
Brass
Tin-plated
electrical
copper
Specifications
9001e-9004e
5510e-5511e
Inrush Rating: 2.5 sec.*
1,750 Amperes DC
1,500 Amperes DC
Cranking Rating: 100 sec.*
900 Amperes DC
700 Amperes DC
Intermittent Rating: 5 min. (UL 1107)
600 Amperes DC
525 Amperes DC
Continuous Rating: (UL 1107)
350 Amperes DC
300 Amperes DC
Terminal Stud, Tin-Plated Copper
3/8”-16 (M10)
3/8”-16 (M10)
Torque
140 in-lb
140 in-lb
Cable Size to Meet Ratings**
4/0 AWG (95mm2 )
4/0 AWG (95mm2 )
Maximum Voltage Rating
48 Volts DC
32 Volts DC
1
Description
Selector
Selector
Single Circuit ON/OFF
Single Circuit ON/OFF
Dual Circuit™
Dual Circuit Plus™
AFD 1
Weight Lb (Kg)
Yes
Yes
-
1.10 (0.50)
1.15 (0.52)
0.92 (0.42)
0.96 (0.44)
1.27 (0.57)
1.27 (0.57)
Alternator Field Disconnect (AFD) protects the diodes in the alternator
in the event of the switch being set to “OFF” while the engine is running.
E marked
Agency Specifications
• UL Listed - UL 1107 electric power switches
• Meets UL 1500 and SAE J1171 external ignition protection requirements
*
See www.bluesea.com for the Blue Sea Systems Engine Starting Standard
**
Reducing cable sizes will reduce current ratings
*** “Blue
Sea Systems’ switch (9001e) is our choice for best value in a standard-duty battery selector switch. It’s made in the U.S. with high grade
materials, comes with a lifetime warranty, and is the least expensive switch in our test.” - Powerboat Reports, June 2005
425 Sequoia Drive
Bellingham, WA 98226 USA
Phone: 360-738-8230
Fax:
360-734-4195
Email:
[email protected]
Internet: www.bluesea.com
APPLICATIONS
1. 9003e and 9004e switches a single battery to a single load group.
2. Can be used in multiples to manage several isolated circuits including
cross connecting for emergency paralleling. 9004e only - includes AFD
Switch Set to “ON”
Singe Circuit ON/OFF
9003 -9004
APPLICATION
9001e and 9002e switches battery bank 1
or battery bank 2 or battery banks 1 and 2 to
a single load using one switch. 9002e only
- includes AFD
Switch Set to “1”
Selector
Switch Set to “2”
Switch Set to “1+2”
9001 -9002
APPLICATIONS
12 Volt
1. Switches both positive and negative lines simultaneously with one simple
ON/OFF switch meeting European and metal boat requirements for
a double pole switch.
24 Volt
2. Switches circuits of different voltages, such as 12 Volt and 24 Volt,
simultaneously with one simple ON/OFF switch.
Dual Circuit™
Switch Set to “ON”
Isolated Battery Banks
5510
Switch Set to “ON”
One Battery Bank
APPLICATIONS
1. Switches two battery banks simultaneously with one simple ON/OFF
switch while maintaining battery bank isolation, minimizing the risk of
a dead Start battery.
2. The COMBINE BATTERIES function offers the ability to combine the
two battery banks in the event of a low Start battery.
Switch Set to “ON”
Dual Circuit Plus™
Switch Set to
“COMBINE BATTERIES”
5511
Competitively Priced Battery Switch Comparison Table
Manufacturer
Blue Sea Systems Perko
Guest
Cole Hersee
BEP/Hella
Model
9001e
2111
M750
721
UL Listed
yes
yes
yes
yes
no
Intermittent Rating (UL 1107)
600A
360A
345A
500A
500A
Continuous Rating (UL 1107)
350A
250A
230A
310A
350A
List Price (USD)
$32.07
$35.12
$29.89
$62.95
$47.95
Tin-Plated Copper Terminals
yes
no
no
no
yes
Terminal Size
3/8”
5/16”
3/8”
3/8”
10mm
Accepts 4/0 Cable
yes
no
no
no
yes
Cable Entry Directions
3
1
1
1
4
Fits Perko Mounting Hole Pattern
yes
yes
yes
no
no
Mounting Area Required (Sq. In)
15
27
30
36
16
AFD Available
yes
yes
yes
yes
no
Warranty
lifetime
5 year *
1 year
please call
2 years
* Limited labor and materials
IGNITION PROTECTED
8501DP
Data collected September 2005
Document 6823 Rev.A