Download Serena and Sivoia QS Triathlon Roller Shades

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts
Transcript
Lutron® Roller Shades
085312 Rev. B 11.18.13
Serena® Roller Shades
Sivoia® QS Triathlon® Roller Shades
Lutron remote-controlled roller shades start, move, and stop
smoothly and quietly, providing privacy and light control at the
touch of a button.
12V Wired Power and Cordless Manual Models
Features
• Battery-powered, wired power, and cordless manual models
• Battery-powered models feature 3-5 year battery life*
• Ultra-quiet operation: 38 dBa measured 3 ft (1 m) from the drive
• Precise drive is capable of stopping at 0.125 in (3 mm) intervals
throughout the entire travel of the shade
• Triathlon® technology maintains accurate hem bar alignment by
compensating for fabric weight and battery voltage
• Easy installation and maintenance
• Built in wireless communication using ClearConnect™ RF
technology
• Wireless control range: 30 ft (9 m)
Battery-powered Model
*Battery life estimate based on 2 up and 2 down movements per
day, assuming a 3 ft. wide by 5 ft. tall shade using light-filtering
fabric. Battery life can vary depending on shade size, fabric
selection, and application.
Optional Fascia
Specifications
Regulatory
Compatible Controls
• cULus listed (E135084)
• FCC (USA)
• IC (Canada)
• CFT (Mexico)
Serena
Ratings
• Pico® wireless control
• Serena 4-Group wireless control (standalone only)
• seeTouch® RF keypads
• GRAFIK Eye® QS
• RadioRA 2®
• HomeWorks® QS
• Pico® wireless control
• Serena 4-Group RF remote control
Sivoia QS Triathlon
• Operating Voltage: 6-12V• Operating Wattage: 5 W
• Torque: 2.0 in•lb
• Speed: 3.6 in/sec
Environment
• Temperature: 32˚ F to 104˚ F (0˚ C to 40˚ C)
• For indoor use only
• Relative Humidity: <90% non-condensing
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 1
Lutron® Roller Shades
085312 Rev. B 11.18.13
Shade Back Cover:
(all battery-powered
models; all models with
optional fascia)
0.40 in
(10 mm)
0.48 in
(12 mm)
1.00 in
(25 mm)
3.00 in
(76 mm)
SHADE WIDTH
1.28 in
(32 mm)
Optional Fascia with End Caps:
4.94 in
(125 mm)
3.375 in
(86 mm)
SHADE WIDTH
Wired Power and Cordless Manual Models
1.80 in
(46 mm)
0.925 in
(23 mm)
3.00 in
(76 mm)
1.570 in
(40 mm)
Mounting Bracket
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Shade Bracket
Page 2
Lutron® Roller Shades
085312 Rev. B 11.18.13
Mounting Options
OUTSIDE MOUNT ON TRIM
Depending on the window dimensions, the shade can be mounted inside the window frame or outside the window frame.
INSIDE MOUNT
INSIDE MOUNT
The window jamb must be at least 3 in (76 mm) deep to fully
recess the shade. With optional fascia, the window jamb
must be at least 3.5 in (76 mm) deep to fully recess the
shade and the fascia.
INSIDE MOUNT
OUTSIDE MOUNT ABOVE TRIM
OUTSIDE MOUNT ABOVE TRIM
Spacer blocks are included when outside mount above trim
is indicated.
Depending on the size of the shade and the depth of the
trim, or the roll direction of the shade, it may be possible to
mount the shade directly to the wall above the trim without
using the spacer blocks.
In this arrangement, the top of the back cover must be a
minimum of 5 1/4 in (133 mm) above the top of the trim, as
shown below.
OUTSIDE MOUNT ON TRIM
5.25 in
(133 mm)
min.
OUTSIDE MOUNT ONOUTSIDE
TRIM MOUNT ON TRIM
Wall
Regular
roll
Reverse
roll
Trim
NOTE: Optional fascia not available with reverse roll.
OUTSIDE MOUNT ABOVE TRIM
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
OUTSIDE MOUNT ABOVE TRIM
Page 3
Lutron® Roller Shades
085312 Rev. B 11.18.13
Power Options
Battery power
Plug-in power supply
• Batteries are not included.
• D-Cell Alkaline batteries required. Quantity (6 or 8) varies with
shade size:
• CSPS-XX-1-6-WH available separately.
• Includes 15 ft (4572 mm) power wire.
CSPS-P1-1-6-WH =
CSPS-P2-1-6-WH =
CSPS-P3-1-6-WH =
Shade Width
Batteries Required
20.5 in (521 mm) to 24 in (610 mm)
6 D-Cell Alkaline
24.5 in (622 mm) to 96 in (2438 mm)
8 D-Cell Alkaline
NOTE: To maintain performance specifications in buildings
with 20 or more Lutron Radio Powr Savr Sensors, Lutron
recommends powering shades with a wired power supply.
Please consult Application Note #477 for more information
Power panel*
CSPS-P1-10-6 available separately.
CSPS-P1-10-6
Up to 10
power
outputs
Line voltage
* Secondary wiring must be of type CL2, CL2P, CL2R, CL2X or other cable with equivalent or better electrical, mechanical, and
flammability ratings in accordance with local and national electric code.
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 4