Download Multifunction Power Meter MAX 3100 SERIES

MaxSave
Multifunction Power Meter
MAX 3100 SERIES
NSK ELECTRIC CO.,LTD
721/1 Moo.5 T.Nongkham A.Sriracha Chonburi 20230 Thailand
Tel. 038-060-588,038-762-443 Fax.038-060-589 ,038-762-446
Product Profile
MAX3100 is a powerful multifunction power meter that can measure more than 60 parameters such as U,I,P,
Q, cos o ,F, kWh, kvarh, etc. The standard MAX3100 has RS-485 communication protocol, 2 energy pulse outputs
(active and reactive each) functions. With optional module, MAX3100 can perform more functions as harmonic
analysis, 8 digital signal inputs, 4 programmable relay outputs, 4 programmable analog outputs (0-5V or 4-20mA).
data storage. Profibus communication, Ethemet metworking capabilities.
Applying modular design. MAX 3100 works flexibly to suit customers'needs. MAX 3100 LCD front panel and
main unit can be connected or separated; the main unit alone can work as a data acquisition module.
MAX3100 fulfills ass the important requirement of IEC60687(GB/T17883-1999),C1268(GN/T17882-1999), IEC
61000-4-30, GB/T 14549-1993, IEC688-1992,GB/T13850-1998.
Measured scope : Single phase, 3P3W system.
EMC and other safety standard
IEC61000-4-2 : 1995 (GB/T17626.2-1998)
IEC61000-4-8 : 1995 (GB/T17626.8-1998)
IEC61000-4-4 : 1995 (GB/T17626.4 -1998)
IEC61010-1 : 1990 (GB/T4793.1-1995)
Functions Description
Real time
measurement
Main
unit
Phase Voltage
Line Voltage
Current
Active Power
Reactive Power
Apparent Power
Power 4 quadrant
Frequency
Power Factor
Phase Voltage, average phase Voltage
Line Voltage, average line Voltage
Phase Current, average phase Current, zero sequence Current
Phase active Power, 3 phase active total power
Phase reactive Power, 3 phase reactive total Power
Phase apparent Power, 3 phase apparent total Power
Power 4 quadrant
System frequency
Phase Power factor, 3 phase total Power factor
Demand statistic
Demand
3 phase active/reactive demand Power, demand apparent Power
Active Energy
Reactive energy
Multi tariff billing
Imported, exported and net acive energy, 1 channel active energy pulse output
Energy Reading
Real time display
Year/month/day/hour/minute/second
RS-485 communication
1 Modbus-RTU protocol
8 Channels
Status detecion, SOE event record
Relay output
4 channels programmable
Programmable over/under limit value for real time measurement, Volt-
module
overlimit/underlimit alarm
age/Current unbalanced ratio,demand value,harmonics, remote signal.
Analog output module
4 channels programmable
Time Display
Data communication
Remote signal
input module
Imported,exported and net reactive energy,1 channel reactive energy pulse output
Multi tariff setup
The overlimit/underlimit command can be read thru com. Port
Data storage
module
4 - 20mA or 0-5V
Store real time measured value in cycle, Voltage/Current.
unbalanced ratio, demand value, harmonics, remote signal.
Storage capacity : 8GB
optional
Module
Harmonic
analysis
module
Total harmonic distortion
for Voltage/Current
Even/odd harmonic distortion
Fundermental Voltage/Current
3 phase, single phase, neutral line
Harmonic distortion ( 2nd to 63rd)
Magnitude, phase angle
Fundermental active/reactive power
Harmonics, individual
Magnitude, phase angle
Current K factor
Profibus
communication module
Ethernet
networking
communication
module
1 channal
Profibus protocol
10M/100M adaptable
TCP/IP com. Protocol
1 channal
Visit Webpage, send email periodically,and send event record information
Measurement Accuracy
Parameters
Voltage
Current
Power factor
Frequency
Active Power
Reactive Power
Apparent Power
Active Demand
Reactive Demand
Active Energy
Reactive Energy
Display
0~9999.9KV
0~9999.9KV
-1~+1
45 ~ 65Hz
-999999 ~ 999999MW
-999999 ~ 999999Mvar
-999999 ~ 999999MVA
-999999 ~ 999999MW
-999999 ~ 999999MVar
0 ~ 999999999MWh
0 ~ 999999999Mvarh
Phase Angle
Curren total harmonic %
Voltage total harmonic %
0.0. ~ 359.9 .
0 ~ 100%
0 ~ 100%
Direction
Directional
Directional
Directional
Directional
Directional
Directional
Class0.2
Class0.2
Class 1
0.01Hz
Class0.5
Class0.5
Class0.5
Class 1
Class0.5
Class0.5
Class 1
Class 2
Class 2
Class 2
Technical Specification
Power consumption: ≤0.2VA per phase
Voltage Input
Input Voltage: 0~400VAC (L-N),0~690VAC (L-L)
(Voltage value can be set up)
System frequency: 45~65Hz
Profibus com.module (optional)
No. of channels
Communication protocol
Profibus-DP protocol
Ethernet networking module (optional)
No.of channels: 1Chanel
10M/100M adaptive
Communication protocol
TCP/IP protocol
Other parameters
Auxiliary Power
85~265VAC/DC (standard)
24~80VAC/DC (optional)
Measurement scope: 3%~120%Un
Display module
Input Current
Input Current: 0~5A (Current value can be set up)
Measurement scope : 0.5%~120%In
Overload capacity : 2Xrated continuously, 100A/1s non continuously
Overload Capacity: 2Xrated continuous,2500V/1s non continuous
LCD Display 76mmx66mm
luminosity con be adjusted
Power consumption: ≤ 0.5VA per phase
Switch Status (Optional)
Input Chaneles
8 channels
Input Type
Dry contact
Contact Capacity
2500VAC
Relay output (optional)
Output Chanels
4 Channels programmable
Output Type
Mechanic contact, constant on output
Contact Capacity
5A/250VAC
Analog output (optional)
No.of outputs
4 Chanels programmable
2GB
<100PPM/. C
Withstand Voltage(input against output) 2500V/1min
Total power consumption
<8VA
-20. C ~ 60. C
Operation temperature
-40. C ~ 85. C
Storage temperature
Operation humidity
5~95%RH
Pollution Class
Class 2
Material of Housing
Flammability acc.to UL94V0
Dimensional Size:Front panel+main unit, 96x99x78mm,
front+main+optional module 96x99x121mm
Output signal
Response time
Dimensional Size:Main unit
main + module
92x112x74mm
92x112x114mm
Dimensional Size:Front panel
96x99x41mm
Installation Size:Front panel+main unit
91x91mm
4 ~ 20mA or 0~5V
≤ 400ms
Pulse output (standard)
No.of outputs
2 channels (active/reactive energy each)
Serial com.port (standard)
No.of outputs
1 RS-485 port
Communication protocol
Modbus-RTU protocol
Baud rate
2400/4800/9600/19200/38400bps
Storage Capacity
Temp.drifting factor
(+module)
Connection and Installation
I. Integrated Front panel + main unit (+module) connection ______Default type
MAX3100 inteqrated connection is mainly for panel installation.
II. Main unit (+module) connection______no display, for data acquisition purpose
MAX3100 con transmit the measured parameters thru com. Port to other device. This installation unit
can be installed on 35mm rail or bolted in the cainet.
III. Front panel and main unit(+module)separated connection ____customized installation
The front panel can be installed on the front panel of cabinet; the main unit can be installed on 35mm
DIN rail or bolted in the cabinet. These two are connected by wire (length of wire is 0.5/1/1.5/2m).
Customized length of wired is offered.
Dimensional and Size Diagram