* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download - Treotham
Survey
Document related concepts
Alternating current wikipedia , lookup
Solar micro-inverter wikipedia , lookup
Pulse-width modulation wikipedia , lookup
Voltage optimisation wikipedia , lookup
Variable-frequency drive wikipedia , lookup
Buck converter wikipedia , lookup
History of electric power transmission wikipedia , lookup
Resilient control systems wikipedia , lookup
Distribution management system wikipedia , lookup
Power electronics wikipedia , lookup
Mains electricity wikipedia , lookup
Distributed control system wikipedia , lookup
Immunity-aware programming wikipedia , lookup
Opto-isolator wikipedia , lookup
Switched-mode power supply wikipedia , lookup
PID controller wikipedia , lookup
Transcript
ELGO Electric Control systems P30 E 2 Compact controllers Type: compact position controllers Controller capacities: 1 axis Features: § Compact design § Comprehensive parameters menu § Integrated 115/230 VAC power unit § Potential free normally opened contact (NOC) relay outputs § Program memory (99 lines) § Manual inching operation § Dot matrix LCD with back lighting E Compact controllers 72 Control systems ELGO Electric min. 66 77 min. 92 96 Side view 92 72 Excerpt from switch panel E E Installation depth including connector = 90 mm all dimensions in mm The P30 is a very compact, user-friendly simple controller with relay outputs which enable a positioning with up to three speed options. An extensive range of common position parameters like, for example: spindle adjustment, manipulation tolerance window, adjustment limit, adjustable departure functions, reference values, saw blade/tool corrector and many others are included. An integrated adjustable impulse assessment factor and flank evaluation including a programmable decimal point are included in order to adapt to the relevant measuring system (rotary encoder or magnetic length measuring system). The P30 can be operated in manual inching mode (manual operation) and, in programmed operations, has a 99 lines memory available. Technical data: Display: Dot matrix LCD with back lighting Supply voltage: 230 VAC/50 Hz or 115 VAC/60 Hz +/- 10 % optional 24 VDC +/- 10 %; 450 mA at 24 VDC, 25 VA at 115 VAC, 5 VA at 230 VAC Measuring system supply: 24 VDC Digital input signals: PNP, (optional NPN) min. 200 ms impulse duration Input frequency of meas. syst: 15 kHz (higher available upon request) per channel, A or B Output signals: potential free NOC 220 V/ 2 A Connection technology: Plug-type, tension-relieved screw terminals Hardware: 32 Bit microprocessor with 768 KByte flash and 24 KByte RAM Housing: Metal Keyboard: Flim, short stroke keys Protection class: IP43 (in installed condition from the front) Operating temperature: 0...50°C Storage temperature: 0...70°C Relative humidity: Non-condensing max. 80 % 3 ELGO Electric Control systems P40 E 4 Compact controllers Type: compact position controllers Controller capacities: 1 and 2 axes controllable Features: § Diverse interfaces (CANopen, RS485, RS422) § User-friendly § Manual inching operation § Individual record operation § LCD display § Program memory 500 lines § Integrated diagnosis operation § 16 digital outputs (+24 V-PNP) § PID – analogue output available as an option E Compact controllers 144 Control systems ELGO Electric 5 min. 138 36,5 E E The P40 is predestined for simple positioning applications in mechanical engineering. The principal benefit is the convenient and rapid input of nominal value and, if required, input of a quantity figure. The actual value, nominal value, quantity and other important values are shown in the LCD display. Parameterisation is carried out in plain text via a graphic menu. The P40 is available with an extensive software standard and an internal program memory of up to 500 lines. For positioning, there are three different variants of output signal available: Shutdown positioning (for one to three speeds), PID and ramp controlled analogue output. Depending on the variant concerned, the P40 can be supplied with either 24 VDC or 24 VAC. It can communicate with a superordinate system via an optional interface. min. 138 138 144 30,5 Excerpt from switch panel Installation depth including connector and cable bend radius = 100 mm all dimensions in mm Technical data: Display: LCD dot matrix with back lighting Connection voltage: 24 VDC (+/-10%), max. 200 mA; 24 VAC, max. 10 VA with unimpaired outputs Measuring system supply: 24 VDC Digital input signals: PNP, min. 200 ms impulse duration Input frequency of meas. syst: 25 kHz per channel, A or B Digital output signals: Open emitter, with limited resistance to short circuits, max. 100 mA output current, integrated free wheeling diodes. Analogue output signals: +/- 10 V resolution 11 bit PID or ramp control Connection technology: DSUB plug connectors or terminals Hardware: 32 Bit microprocessor with 768 KByte flash and 24 KByte RAM Housing: Metal Keyboard: Film keyboard Protection class: IP 43 (in assembly) Operating temperature: 0...50°C Storage temperature: 0...70°C Relative humidity: Non-condensing max. 80 % ELGO Electric Control systems E 22 Accessories Retrofitting sector Our proven compact controllers Note: Available until further notice P8511 Simple controller without programmable memory § For simple positioning applications § With optional integrated PID analogue output (+/- 10 V) § Manual inching operation § Up to 3 speeds § Additional quantity window § Display of actual value, nominal value and quantity on control panel § Using the keypad, nominal value and quantity can be specified and the positioning operation can be started. § 24 VDC power supply or integrated 115/230 VAC power unit § Available with relay or digital outputs § Optional RS232 interface P8721 Simple controller with programmable memory § Identical basic functions to the P85 § 200 records program memory § With optional integrated PID analogue output (+/- 10 V) § Manual inching operation § Individual record operation § 24 VDC power supply or integrated 115/230 VAC power unit § Available with relay or digital outputs § Optional RS232 interface E Retrofitting sector Accessories Control systems ELGO Electric P8822 Two-axis controller with programmable memory § Designed for the positioning of two axes § With a few restrictions, it matches the functional capabilities of the P87 § 24 VDC power supply or integrated 115/230 VAC power unit § 200 records program memory § Manual control unit § Available with relay or digital outputs P9511/P9521 Compact simple controller with program memory § Program memory (10 records) § Manual movement function § Compact design § Comprehensive parameters menu § Potential-free changeover relay outputs § 24 VDC power supply or integrated 115/230 VAC power unit 23 Symbols for technical data and their meaning Property control Symbol Explanation Digital output signals Potential-free NO contact or electronic output signal PID drive control PID analogue output for 1-2, 1-4 or 1-6 axes Drive control ramp function Ramp-controlled analogue output for 1-2, 1-4 or 1-6 axes Display mode Monochrome or colour LCD Type of input Keyboard or touchscreen Connection voltage 24 VDC or 230/115 VAC supply voltage Incremental measuring system input without index impulse HTL- (single ended) or TTL-signal (coincident) Incremental measuring system input with index impulse HTL- (single ended) or TTL-signal (coincident) Absolute measuring system input Interface for absolute ELGO measuring system Measuring system supply 24 VDC supply voltage for rotary impulse sensor or linear measuring systems Type of protection IP43 in installed condition and IP00 in uninstalled condition and/or IP00 in installed and in uninstalled condition Number of axes 1, 1-2, 1-4 or up to 6 axes Interfaces RS232 communication The position controllers In the automation era, the demands faced by the mechanical engineering sector have risen: never before has it been so essential to satisfy wishes for quality, flexibility and customized solutions in an application-oriented context. ELGO expertly reflects these aims and objectives in its product portfolio of controllers and offers user-friendly and cost-effective solutions in the axis positioning, angle adjustment and speed monitoring sectors. To satisfy the requirements of diverse sectors, ELGO can supply compact controllers, programmable controller systems and IPCs. These positioning controllers offer significant benefits. Positioning via bipolar analogue outputs or digital travel signals Storage of axis parameters and function blocks Simple assembly and installation Menu-guided user interface User-friendly design Small footprint - i.e. not much space required Cost-effective variants Tailor-made software solutions CoDeSys: licence-free programming software