Download SmartRF CC1010

SmartRF â CC1010
Chipcon
CC1010
Single Chip Very Low Power RF Transceiver with
8051-Compatible Microcontroller
Applications
• Very low power UHF wireless data
transmitters and receivers
• 315 / 433 / 868 and 915 MHz ISM/SRD
band systems
• Home automation and security
• AMR – Automatic Meter Reading
• RKE – Remote Keyless Entry with
acknowledgement
• Low power telemetry
• Toys
Product Description
The CC1010 is a true single-chip UHF
transceiver with an integrated high
performance 8051 microcontroller with 32
kB of Flash program memory. The RF
transceiver can be programmed for
operation in the 300 – 1000 MHz range,
and is designed for very low power
wireless applications.
The CC1010 together with a few external
passive
components
constitutes
a
powerful embedded system with wireless
communication capabilities.
CC1010
is
SmartRFâ02
CMOS.
based
on
technology in
Chipcon’s
0.35 µm
Key Features
• 300-1000 MHz RF Transceiver
• Very low current consumption
• High sensitivity (typically -107 dBm)
• Programmable output power up to
+10 dBm
• Data rate up to 76.8 kbit/s
• Very few external components
• Fast PLL settling allowing frequency
hopping protocols
• RSSI
• EN 300 220 and FCC CFR47 part
15 compliant
• 8051-Compatible Microcontroller
• Typically 2.5 times the performance
of a standard 8051
• 32 kB Flash, 2048 + 128 Byte SRAM
• 3 channel 10 bit ADC, 4 timers / 2
PWMs, 2 UARTs, RTC, Watchdog,
SPI, DES encryption, 26 general I/O
pins
• In-circuit interactive debugging is
supported for the Keil µVision2 IDE
through a simple serial interface.
• 2.7 - 3.6 V supply voltage
• 64-lead TQFP
This document contains information on a preproduction product. Specifications and information herein are subject to
change without notice.
Chipcon AS
SmartRFâ CC1010 PRELIMINARY Datasheet (rev. 1.0) 2002-09-18
Page 1 of 133