Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
GTi MkII Subwoofers Key Specifications Highlights • Kevlar -impregnated-paper woofer cone • Dual 6 ohms edge wound aluminum coils • Differential drive design • Proprietary cast aluminum frame ® W12GTI MKII W15GTI MKII Size: 300mm (10") 380mm (12") Type: Dual 6 ohms voice coils Dual 6 ohms voice coils Peak Power Handling: 4000W 5000W RMS Power Handling: 700W 800W Impedance: 2 x 6 Ohms 2 x 6 Ohms Frequency Response: 18Hz – 1kHz 16Hz – 1kHz Sensitivity 2,83V @1m: 91dB 92dB GTi MkII Subwoofers FeatureS Kevlar -impregnated-paper woofer cone • Chosen for its high strength to weight ratio. Adds stiffness to relieve stress at the base of the cone caused by high output applications. ® Dual 6 ohms edge wound aluminum coils • Are used for their good heat dissipation capability and flexible subwoofer system designs. GTi high impedance woofers benefit from the high voltage amplifier designs used in JBL Power and GTI amplifiers. Differential drive design • Allows for nearly twice the linear one-way Xmax compared to a conventional motor design. Proprietary cast aluminum frame • Provides enough strength to support the massive motor (three 120oz magnets). The vented and finned architecture provide substantial motor cooling. Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329, USA www.jbl.com © 2008 Harman International Industries, Incorporated. All rights reserved. JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Kevlar is a registered trademark of E.I. du Pont de Nemours and Company. Features, specifications and appearance are subject to change without notice.