Download Kollmorgen 4Ch-Digital-Input Datasheet en

I / O
T e r m i n a l s
4-Channel Digital Inputs, 24 V DC
The 4 channel digital input terminals acquire the binary 24 V control signals and transmit them, in an electrically
isolated form, to the higher-level automation unit. These terminals contain four channels that indicate their signal
state by means of LEDs and have different input filters. The input signal of these terminals corresponds to
IEC 61131-2, type 1. Additionally, the 4-channel Bus Terminals enable the direct connection of four 2-wire sensors.
Four +24 V connection points are provided.
Signal LED 1
Signal LED 3
Signal LED 2
Signal LED 4
Input 1
Input 2
1
+24 V
Power Contact
+24 V
Power Contact
0V
Intput 3
5
2
6
+24 V
3
Input 4
4 8
7
2-Wire
Connection
AKT-DN-004 / AKT-DNH-004
Electrical and Mechanical Specification
AKT-DN-004-000
Number of inputs
4
Nominal Voltage
24 V DC (-15 % /+ 20 %)
“0” signal voltage
-3 V ... 5 V ( IEC 61131-2, type 1/3)
“1” signal voltage
15 V ... 30 V ( IEC 61131-2, type 3)
“0” signal current
0...1.5 mA
“1” signal current
2.0...2.5 mA
Input filter
3.0 ms
Current consumption standard-bus
Typ. 3 mA
AKT-DNH-004-000
0.2 ms
Electrical isolation
500 Vrms (standard-bus / field potential)
Bit width in the process image
4 inputs
Configuration
No address or configuration settings
Weight
50 g
Operating/storage temperature
0 C ... +55 °C /-25 °C... +85 °C
Relative humidity
95 %, no condensation
Vibration/shock resistance
Conforms to EN 60068-2-6 / EN 60068-2-27/ 29
EMC immunity/emission
Conforms to EN 61000-6-2 / EN 61000-6-4
Protect. class/installation pos.
IP 20 / variable
Pluggable wiring
For all Bus Terminals
2 0 3 A
W e s t
R o c k
K O L L M O R G E N
K O L L M O R G E N
|
|
R o a d
•
R a d f o r d ,
V A
2 4 1 4 1
U S A
•
P h o n e :
1 - 5 4 0 - 6 3 3 - 3 5 4 5
w w w. k o l l m o r g e n . c o m
A D A N A H E R M O T I O N C O M PA N Y
|
w w w. d a n a h e r m o t i o n . c o m / k o l l m o r g e n
© 2009-2010 Kollmorgen Corporation. All rights reserved. KM_DS_00021_RevA_EN
Specifications are subject to change without notice. It is the responsibility of the product user to determine the suitability of this product for a specific application. All trademarks are the property of their respective owners.