Download Connect your camera to each BNC composite video input connector

Connect your camera to each BNC composite video input connector.
Infrared sensor
External
I/O Box
Proximity sensor
Sensor
inputs
D-type 15-pin
Connector Cable
(Optional)
Smoke detector
C a me r a 1
IN 1
Relay control
C a me r a 2
IN 2
Burglar alarm
C a me r a 3
Reed switch
Control
Outputs
Access control lock
IN 3
IN 4
C a me r a 4
Coaxial Cable
(Not Supplied)
Connecting with External Sensor/Relay
We also provide optional External I/O Boxes and 15-pin D-type connector cables for you to
easily connect the sensor inputs and relay outputs with AVer-S video cards. The sensor
inputs/relay output signals of External I/O Box and 15-pin D-type connector are illustrated
below:
D-type 15-pin connector
Sensor Input 2
Sensor Input 1
Sensor Input 4
Relay Outputs 3
Sensor Input 3
Relay Output 1
Relay Output 2
IN
IN
1
IN
2
IN
3
4
AVer-S Video Card
Sensor Input Specification
External I/O Box
Relay Output Specification
Surge strength: 1500 VAC
Nominal power 200mw ~ 360mw
Operating power 110mw ~ 200mw
COIL RATINGS (at 20oC )
Coil Nominal Coil
Voltage
Resistance
(VDC)
(
10% )
Pick-up
Voltage
(VDC)
Drop-Out
Voltage
(VDC)
Nominal
Current
(mA)
5
3.75
0.5
40
125
* Max Continuous Voltage at 20oC : 110% of Coil Nominal Voltage
CONTACT RATINGS
Contact Arrangement
1 Form C (SPDT)
max. Switch Power
max. Switch voltage
max. Switch current
Contact Resistance
Resistive Load
125VA
60W
125VAC
30VDC
2A
100m
1A/125VAC
2A/30VDC
AgNi10
Contact Material
Pin #
Signal Name
1
INPUT SIGNAL 1+
2
INPUT SIGNAL 2+
3
INPUT SIGNAL 3+
4
INPUT SIGNAL 4+
5
OUTPUT 3 Normal Close
6
INPUT SIGNAL 1-(GND)
7
INPUT SIGNAL 2-(GND)
8
INPUT SIGNAL 3-(GND)
9
INPUT SIGNAL 4-(GND)
10
OUTPUT 3 Common
11
OUTPUT 1 Normal Open
12
OUTPUT 1 Common
13
OUTPUT 2 Normal Open
14
OUTPUT 2 Common
15
OUTPUT 3 Normal Open
Sensor Inputs:
External sensors such as infrared sensors, smoke detectors, proximity
sensors, door sensors, etc., can be connected to the AVer-S EYES
Pro/MP3000 to trigger the system to record or assert an output. Each
Video card supports up to 4 sensor inputs.
Relay Outputs:
The AVer-S EYES Pro/MP3000 can be connected to external output
control devices such as burglar alarms, door locks, light switches, etc.
The system can be configured to activate or deactivate these devices.
Each AVer-S EYES Pro/MP3000 video card supports three relay outputs.
Two are normally open relays, and the other one can be a toggle switch.