* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Trip circuit and Trip Coil supervision Relay
Survey
Document related concepts
Buck converter wikipedia , lookup
Opto-isolator wikipedia , lookup
Switched-mode power supply wikipedia , lookup
Surge protector wikipedia , lookup
Surface-mount technology wikipedia , lookup
Immunity-aware programming wikipedia , lookup
Flexible electronics wikipedia , lookup
Mains electricity wikipedia , lookup
Regenerative circuit wikipedia , lookup
Electrical substation wikipedia , lookup
Integrated circuit wikipedia , lookup
Fault tolerance wikipedia , lookup
Earthing system wikipedia , lookup
Rectiverter wikipedia , lookup
Residual-current device wikipedia , lookup
RLC circuit wikipedia , lookup
Electrical wiring in the United Kingdom wikipedia , lookup
Transcript
PROTECTION Trip circuit and Trip Coil supervision Relay Type VAX / MVAXM Customer Benefits • Trip circuit and Trip coil supervision relay • Choice of pre-closing and Post-closing supervision • Simple and robust construction • Draw out type case • Completely dust proof by IP5X class protection GRID 1 Type VAX / MVAXM Types VAX & MVAXM Trip circuit supervision relays Features • Simple and robust construction • Positive action without chatter • Choice of pre-closing and post-closing supervision Application Post-closing or continuous supervision of the trip circuit of circuit breakers General description Type VAX and MVAXM relays are of simple and robust construction. They are arranged to initiate an audible alarm and visual indication if the trip circuit of a circuit breaker fails or the breaker tripping mechanism does not operate Two versions of type VAX and MVAXM relays are available. Type VAX 21 and MVAXM 21 relays monitor the trip circuit only when the circuit breaker is closed (post-closing supervision only) while type VAX 31 and MVAXM 31 relays monitor the trip circuit continuously (both pre-closing and post-closing supervision). Both versions detect the following conditions. • Failure of trip supply • Open circuit of trip coil of trip circuit wiring • Failure of mechanism to complete the tripping operation Type VAX 21 and MVAXM 21 relays consist of two units connected as shown in figures 1(a) and 1(b). Under healthy condition with circuit breaker closed, both units are energised. If the trip circuit gets open or the trip supply fails, units A drops-off Type VAX 31 and MVAXM 31 relays Under healthy conditions with the consist of three units connected as shown in figures 2(a) and 2(b), circuit breaker closed, units A and C are energiesed and the operation is the same as that of type VAX 21 and MVAXM 21 relays. When the circuit breaker is open unit B is also energised via the normally closed auxiliary switch of the circuit- breaker and unit C is held-in by contact B-1 Unit B will detect trip circuit abnormalities with the circuit breaker open in a similar manner as unit A with the circuit breaker closed The C unit in both the versions are delayed on drop-off by means of RC circuit for a total time of 350 to 800 milliseconds, to prevent a false alarm due to collage dips caused by faults in other circuits or during a normal tripping operations, when unit A is momentarily short circuited by the self reset tripping relay contact. If the trip relay fails to reset possibly due to failure of the circuit breaker tripping mechanism, the alarm is initiated The alarm unit is designed to operate via pilot wires, if required and opens contactA-1 to de-energise unit C. when the circuit breaker is open the auxiliary switch of the circuit breaker shorts contact A-1 to hold-in unit C. 2 Type VAX / MVAXM Technical data Coil rating For VAX relay: able for use with anti-corrosion negative potential blasing device. Operating indicator For MVAXM relay: Hand reset operating indicator provided when required 24,30, 48, 50, 110/125 or 220/250 volts dc operating band 80% - 120% of rated voltage 110/125 and 220/250 Volts dc as standard and other coil ratings are available on request Maximum loop resistance is 400 ohms for nominal alarm supply. Maximum loop resistance – 50 ohms for nominal alarm supply – 24 to 50 V Contacts 3 pairs of self reset contact one make and two ‘break’ as standard Operating time Insulation Other alarm supplies – 400 ohms 0.35 to 0.8 sec. at 80% of rated volts (between failure of trip circuit and operation of alarm contact) The relays meet the requirements of IS 3231/EC 255-5 Series C-2 KV for 1 minute When rated for a 100V alarm supply the unit ‘C’ will not operate at a current less than 25 milliamperes. It is therefore suit- Thermal rating 120% of rated voltage continuous Burdens For VAX Maximum watts DC Voltage 24 30 48/50 110/125 220/250 Trip supply 0.52 0.56 0.62 1.56 3.13 Alarm Supply 0.37 0.38 0.44 1.12 2.6 For MVAXM Maximum watts Dc voltage 110/125 220/250 Trip supply 1.56 3.13 Alarm supply 1.12 2.6 Contact ratings Make and carry continuously Make and carry for 3 break seconds AC 1250VA with maximum of SA 7500VA with maxima of 30A 1250VA with maxima of 5A and and 660 V and 660V 660V DC 1250 with maximum of 5A and 7500VA with maxima of 30A 100W (resistive) 50W (induc660V and 660V tive) with maxima of 5A and 660V 3 Type VAX / MVAXM Dimensions and weights For VAX relay relay VAX 21 VAX 31 Case Size Maximum overall dimensions Approximate Height mm Width mm Depth* mm Gross weight Kg. ½ N Hor. 124 153 130 1.8 1D Vert. 233 170 203 5.2 ½ N Hor. 124 153 130 1.8 *Add 76 mm for maximum length of terminal studs, alternatively, 29 mm for terminal screws. The approximate gross weights given above are inclusive of cartons, mounting appendages and terminal details. The relays comply fully with requirements of IS 3231 and are suitable for use in normal tropical environments. For MVAXM relay: • MVAXM 21 Size 3 Midos • MVAXM 31 Size 4 Midos Information required with order 1. Type of relay (VAX 21 or VAX 31 or MVAXM 21 or MVAXM 31) 2. Coil voltage rating Figure 1 (a) Supervision circuits with type VAX 21 relay 4 Type VAX / MVAXM Figure 1 (b) Supervision circuits with type MVAXM 21 relay Figure 2 (a) Supervision circuits with type VAX 31 relay Figure 2 (b) Supervision circuits with type MVAXM 31 relay 5 INFORMATION REQUIRED WITH ORDER > Setting ranges Tap setting (Is) 20%, 40% 80%, 160% In. 10%, 20%, 40%, 80% In. 5%, 10%, 20%, 40% In. Current setting multiplier Relay type CT Secondary rating Setting range Figure 3 : Case and panel cut-out dimensions for case 1/2N (all dimensions in mm) Auxiliary supply voltage 1-2x tap setting This gives effective setting ranges of: 20 - 320% In. 10 - 160% In. 5 - 80% In. 71 26 4 holes Ø4.4 Figure 3 23.5 Case outline: size 3 168 159 Push button projection 10 max > Operating time Panel cut-out: Flush mounting fixing details 73 32 ORMATION REQUIRED Operate time <10ms HReset ORDER time <15ms, typically 12ms 25 min. 212 177 157 max. ype rating >ondary Contacts range y supply voltage MCTI 40 Reset 77 Flush mounting All dimensions in mm 71 Figure 4 : Case and panel cut-out dimensions for case 1D (all dimensions in mm) 2 normally open or 1 normally open and 1 normally closed per phase or earth fault element 26 4 holes Ø4.4 3 52 23.5 Figure 4 Case outline: size 4 utline: size 3 > Contact ratings 168 All dimensions in mm 168 Panel cut-out: Make and carry73 Break Flush mounting fixing details for 0.2s 212 7500VA32with 1250VA with 25 min. maxima of 30A maxima of 5A and 300V and 300V 157 max. 7500W with 50W (Resistive) maxima of 30A 25W (Inductive) Reset and 300V with L/R=40ms Flush mountingwith maxima of 5A and 300V 159 Push button projection 10 max. 99 Panel cut-out: Flush mounting fixing details. 32 212 157 max. 103 11 Flush mounting. Figure 6 : Case outline: size 4 52 4 holes Ø 4.4 97 23.5 4 Figure 5 Relay type Case size utline: size 4 Case outline: size 6 All dimensions in mm. MCTI 40 ALSTOM T&D 6 INDIA LIMITED 168 159 Outline drawings are Works shown in Figures 3, 4 and 5. Pallavaram 19/1, G.S.T. Road, button 043 Pallavaram, Chennai Push - 600 99 projection 10 max. Tel: 91-44-2264 8000 Panel cut-out: Flush mounting fixing details. Fax: 91-44-2264 0040 32 212 ALSTOM T&D Worldwide Contact Centre: http://www.alstom.com/contactcentre/ Tel.: +44 (0) 1785 250177070 103. 6 4 holes ø4.4 149 All dimensions in mm. 23. 5 151 Panel cut-out: Flush mounting fixing details. 32 25 min. 157 max. 159 168 Push button projection 10 max. 212 25 min. 157 max. 177 GRID www.grid.alstom.com 103 25 min. 177 Figure 5 : Case outline: size 3 > Cases 23.5 All dimensions in mm. 159 Push button projection 10 max Current Make and carry continuously AC 1250VA with maxima of 5A and 300V 177 DC 1250W with maxima of 5A 77 and 300V 4 holes Ø 4.4 97 “Alstom logo and any alternative version thereof are trademarks and service marks of Alstom. The other names mentioned, registered or not, are the property of their respective companies. The technical and other data contained in the document are provided for information only. Neither ALSTOM, its officers nor employees accept responsibility for or should be taken as making any representation or warranty (whether express or implied) as to the accuracy or completeness of such data or the achievements of any projected performance criteria where these are indicated. No liability is accepted for any reliance placed upon the information contained in this brochure. Alstom reserves the right to revise or change these data at any time without further notice.” Type VAX / MVAXM Flush mounting. 11 155 Flush mounting. 11 6