Download Raman Amplifier Module

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Power engineering wikipedia , lookup

Power over Ethernet wikipedia , lookup

Solar micro-inverter wikipedia , lookup

Control system wikipedia , lookup

Switched-mode power supply wikipedia , lookup

Opto-isolator wikipedia , lookup

Metadyne wikipedia , lookup

Decibel wikipedia , lookup

Rectiverter wikipedia , lookup

Audio power wikipedia , lookup

Wien bridge oscillator wikipedia , lookup

Transcript
Raman Amplifier Module
PRODUCT BRIEF
KEY FEATURES
OVERVIEW
 Raman gain measurement and
automatic gain control (AGC)
Finisar's Raman amplifier module is an intelligent pump unit for distributed Raman
amplification. The Raman amplifier module can accommodate two or three pumps (multiple
wavelengths) for C or L-band amplification, and includes full and comprehensive electronic
control. The dual and triple-pump models have a maximum output power of 700 mW and
1 W, respectively. Using patent pending technology, the Raman pump unit can operate in full
automatic gain control (AGC) mode, thus allowing the Raman gain to be set with an accuracy of
+/-0.7 dB.
 Class 1M* laser safety classification
 Detection of optical supervisory
channel (OSC)
 Detection of open connectors
and/or broken fiber up to few tens
of kilometers from the module
 Supports both co- and counterpropagating configurations
 Up to 18 dB average gain for G.652
fiber (three pump model)
 Gain flattening optimization based
on fiber type and pump power.
Option for GFF
The Raman module is classified as Class 1M* with respect to laser safety. The pump unit includes
three parallel, non-dependent eye safety mechanisms that shut down the unit in case of a fiber
link disruption, including open connectors (both PC and APC) or broken fiber, even at a distance
of a few tens of kilometers from the unit. This unique and comprehensive safety mechanism is
extremely important due to the high pump power required for distributed Raman applications.
The Raman amplifier is also available as a network ready 1RU rack-mountable unit. Additionally,
a 3RU rack mountable unit is available supporting up to six Raman pumps with up to 2 W
output power.
 PDG <0.3 dB (triple-pump solution),
<0.6 dB (dual-pump solution)
applications
Long repeaterless links (e.g. island
hopping, desert ranges and oil rigs)
Low latency links (less FEC and
O-E-O conversion)
 Storage area networks (SANs),
remote locations, disaster recovery
 Security-sensitive applications
 Traversing challenging spans
within multi-spans links
Improving OSNR in long-haul and
ultra-long haul links
 40 Gb/s and 100 Gb/s transmission
and/or Increasing channel count to
80+WDM channels
Transmit Site
Tx
Tx
Tx
M
U
X
Receive Site
14xx/15xx
14xx/15xx
Preamp
Booster
DCF/M
20 dBm
Tx
14xx Co
Prop Raman
Pumps
14xx Counter
Prop Raman
Pumps
Rx
D
E
M
U
X
Rx
Rx
Rx
OSC-Rx
Raman Amplifier Module
Key Specifications
Parameter
Specifications
Remarks
Min.
Max.
Unit
Wavelength Range
1529
1565
nm
Wavelength Range, OSC
1500
1520
nm
Input Power Range
-40
+5
dBm
At line port with Raman off
Input Power Range, OSC
-50
-10
dBm
At line port with Raman off
Maximum Pump Power
700
1
mW
W
2 pumps
3 pumps
Average Gain
13
18
dB
2 pumps
3 pumps
+/- 0.7
dB
Gain Flatness
1
1.2
<0.5
dB
Signal Insertion Loss
1.8
dB
OSC Insertion Loss
1.8
dB
Noise Figure
-1
dB
PMD
0.2
psec
PDG, PDL
0.6
0.3
dB
2 pumps
3 pumps
dB
OSC is dropped within module
Gain Setting Accuracy in AGC Mode
OSC Drop Isolation
30
Laser Safety
Pump power, signal power (either co- or counter-propagating), line back-reflection at 1400-1500 nm
band and 1500-1520 nm band, sub modulation on OSC power
Environment Operating Temperature
-5
+65
°C
Storage Temperature
-40
+85
°C
5
90
%
Supply Voltage
At maximum gain
At lower gains NF can reach 0 dB
CDRH 1040.10, IEC 60825-1
Class 1M
Monitored Parameters
Humidity
2 pumps
3 pumps
With GFF
5
V
25
40
Max Power Consumption
Current @ 5V Supply
5
8
Dimensions (WxHxD)
200x130x29
Communication Interface
W
2 pumps
3 pumps
A
2 pumps
3 pumps
mm
Without heat sink. Other package types available
RS232
* Class 1M products are not hazardous under normal circumstances, but may pose an eye hazard when the laser output is viewed with certain
optical instruments (for example eye loupes, magnifiers and microscopes) within a distance of 100 mm
1389 Moffett Park Drive
Sunnyvale, CA 94089-1133
www.finisar.com
Phone: +1-408-548-1000
Sales: +1-408-541-5690
Email: [email protected]
© 2013 Finisar Corporation. All rights reserved. Finisar is a registered trademark of Finisar Corporation.
Features and specifications are subject to change without notice. 07/13
Visit Our Website