Download PowerFlex 755T Drive Solutions Low Harmonic Regenerative

PowerFlex® 755T Drive Solutions
Low Harmonic, Regenerative and Modular Drive System Solutions
Information is preliminary, subject to change
PowerFlex 755T Drive Solutions
The Next Step in Powerful Performance. Flexible Control.
The new Allen-Bradley PowerFlex 755T products expand the proven portfolio of the PowerFlex 753 and 755 AC drives.
These powerful new additions offer precise motor control along with solutions for regeneration, low harmonics and
flexible drive system configurations.
The PowerFlex 755T products use TotalFORCE technology, our patented field oriented control for accurate torque control.
With TotalFORCE, the PowerFlex 755T products deliver fast, precise, responsive control of position, velocity and torque.
Designed and built using a modular approach, the PowerFlex 755T products allow you to select the ratings and
capabilities your application needs. The modular construction also offers the added advantage of fast and easy parts
replacement and simplified management of a common set of spares.
PowerFlex 755TL Drive – Provides low AC input harmonics and power factor correction through the use of active front
end technology.
PowerFlex 755TR Drive – Provides an energy efficient solution that uses regenerative active front end technology to
deliver energy back to the incoming supply. This drive also provides low AC input harmonics and power factor correction.
PowerFlex 755TM Drive System – Select from a series of pre-designed configurations for regenerative common bus
supplies and common bus inverters to optimize your system design and power consumption.
PowerFlex 755TL low harmonic drive
2
Information is preliminary, subject to change
PowerFlex 755TR low harmonic, regenerative drive
The highly differentiated control technology in the PoweFlex 755T products is complemented with innovative power
control elements that help deliver valuable solutions for a wide range of applications in variable speed control.
• Our active front end technology enables the
PowerFlex 755T products with the ability to
regulate active current and reactive power to
correct power factor
• PowerFlex 755TL, PowerFlex 755TR and PowerFlex
755TM products are all designed to meet the IEEE
519 standard
• Keep your equipment running through most
power quality disturbances with active front end
ride-through control that regulates the DC bus
voltage independently of the incoming AC voltage
• Reduce commissioning time and mechanical wear
with Load Observer and Adaptive Tuning
• Standard built-in dual EtherNet/IP ports provide
topology flexibility
• Flexible slot-based hardware architecture allows
you to select option modules for safety, feedback,
communications and I/O
• The modular design provides a faster way to install
and maintain your drive while providing common
spare parts throughout the product line
• Safety options help protect personnel and assets
while enabling increased machine uptime
• Predictive diagnostics help reduce unplanned
downtime and improve productivity
• Complete your configuration and programming
with one software tool – use either Studio 5000
Logix Designer or Connected Components
Workbench software
PowerFlex 755TM low harmonic, regenerative drive system for control of multiple motors
Information is preliminary, subject to change
3
PowerFlex 755TL Drive
The PowerFlex 755TL drive is designed to mitigate harmonics using active front end technology and an internal
harmonic filter. Harmonic distortion created by an electrical piece of equipment will affect all other equipment sharing
the same source of electrical power and can lead to increased repair and replacement costs. The PowerFlex 755TL drive
provides a complete solution that includes a line side converter, harmonic filter and inverter to help reduce the adverse
effects of harmonic distortion on adjacent electrical equipment and control system instrumentation.
• Corrected power factor helps reduce energy-related
expenses
• Decrease floor space requirements with built-in
components
• The combination of lower harmonics and power
factor correction reduces the need to oversize your
electrical power equipment
• Use one interface to configure and program the
converter and inverter using Studio 5000 Logix
Designer or Connected Components Workbench
software
• Maintain operation through most line disturbances
with AFE ride-through control
• Eliminate the need for external multi-phase
transformers or filters along with the associated
wiring, labor, installation and maintenance costs
PowerFlex 755TL Drive
4
400/480V
160…1250 kW / 250…1800 Hp
600/690V
250…1500 Hp / 200…1400 kW
Communications
Standard built-in dual ports for EtherNet/IP
Additional industrial network options
Safety Options
Safe Torque Off
Safe Speed Monitor
Ambient Temperature
Ratings
40 °C
Up to 55 °C w/deratings
TotalFORCE Technology
Motor Control
Flux Vector Control
Sensorless Vector Control
V/Hz
Economizer
Enclosure Type
IP21, UL Type 1
IP54, UL Type 12
Information is preliminary, subject to change
• Meets IEEE 519 standard (5% or less of total
harmonic distortion)
Negative impacts of harmonic distortion may
include motors that run at higher temperatures,
leading to increased repair and replacement costs.
Circuit breakers may trip erratically. Interference
in communications and consequent improper
operation of sensitive control equipment such as
programmable controllers, computers and field
instrumentation are also very common.
Beyond your facility, harmonic power distortion
may cause problems for commercial or residential
neighbors on your electrical grid. As a result,
you may be required to conform to standards for
low harmonic distortion at a Point of Common
Coupling (PCC). PowerFlex 755TL, PowerFlex
755TR and PowerFlex 755TM products are
designed to meet and exceed global standards like
IEEE 519 in terms of maximum allowable % of
THD (total harmonic distortion).
5
PowerFlex 755TL Drive
1 AC Pre-charge regulates the input AC current
from the incoming power source, greatly
reducing stress on the power components
during power up.
1
2 LCL filter is a 230 mm wide module that
provides low harmonic capability and
minimizes the current distortion into the
utility grid.
2
3
3 Line side converter is a 230 mm wide
4
module. In the PowerFlex 755TL, it draws
energy from the AC line without harmonic
distortion and converts it to DC power.
4 Motor side inverter is a 230 mm wide
module that controls the voltage and current
of the motor.
6
5 IP21/IP54 enclosures provide a choice of
packaging options to meet the environmental
requirements of your application.
6 Control pod contains the control platform
that is responsible for motor control, system
control and communications. Five option slots
allow you to add I/O, safety and feedback.
7 Roll in/roll out design makes the drive easy to
install and service by allowing complete removal of
a module from cabinet, providing generous room
for wiring behind the drive. Power wiring can stay
connected while unit is rolled out.
7
Information is preliminary, subject to change
5
PowerFlex 755TR Drive
The PowerFlex 755TR drive provides regenerative and low harmonic capability with active front end technology.
With built-in regeneration, the PowerFlex 755TR drive helps reduce energy consumption by delivering energy back
to the incoming supply rather than wasting it as heat, resulting in a more energy efficient solution.
• The drive is able to put energy back on the incoming
power supply, providing a far more energy efficient
solution than resistive braking
• Recover dissipated energy and re-use that energy
for other applications, creating energy savings that
increase the return on investment made in the drive
• Reduce the adverse effects of harmonic distortion
on adjacent electrical equipment and control system
instrumentation
• Reduce the need for braking resistors and cooling
equipment along with associated wiring, labor,
installation and maintenance costs
• Corrected power factor helps reduce energy-related
expenses
• Reduce floor space requirements with built-in
components necessary for reducing harmonics and
providing regeneration
• The combination of lower harmonics and power factor
correction reduces the need to oversize your electrical
power equipment
• Maintain operation through most line disturbances
with AFE ride-through control
• Eliminate the need for external multi-phase
transformers or filters along with the associated wiring,
labor, installation and maintenance costs
PowerFlex 755TR Drive
6
400/480V
160…2000 kW / 250…3000 Hp
600/690V
250…2500 Hp / 200…2300 kW
Communications
Standard built-in dual ports for EtherNet/IP
Additional industrial network options
Safety Options
Safe Torque Off
Safe Speed Monitor
Ambient Temperature Ratings
40 °C
Up to 55 °C w/deratings
TotalFORCE Technology
Motor Control
Flux Vector Control
Sensorless Vector Control
V/Hz
Economizer
Enclosure Type
IP21, UL Type 1
IP54, UL Type 12
Information is preliminary, subject to change
• Use one interface to configure and program the
converter and inverter using Studio 5000 Logix
Designer or Connected Components Workbench
software
• Meets IEEE 519 standard (5% or less of total harmonic
distortion)
5
PowerFlex 755TR Drive
1 AC Pre-charge module regulates the input AC
current from the incoming power source, greatly
reducing stress on the power components
during power up.
1
2 LCL filter is a 230 mm wide module that
provides low harmonic capability and minimizes
the current distortion into the utility grid.
2
3 Line side converter is a 230 mm wide module.
3
In the PowerFlex 755TR, it draws energy from
the AC line without harmonic distortion and
converts it to DC power. It also provides a means
of regeneration back to the AC line.
4
4 Motor side inverter is a 230 mm wide module
that controls the voltage and current of the
motor.
6
5 IP21/IP54 enclosures provide a choice of
packaging options to meet the environmental
requirements of your application.
6 Control pod contains the control platform that is
responsible for motor control, system control and
communications. Five option slots allow you to
add I/O, safety and feedback.
7 Roll in/roll out design makes the drive easy to
install and service by allowing complete removal of
a module from cabinet, providing generous room
for wiring behind the drive. Power wiring can stay
connected while unit is rolled out.
7
Information is preliminary, subject to change
7
PowerFlex 755TM Drive System
The PowerFlex 755TM drive system has been designed to enable coordination of multiple motors based on two main
building blocks: regenerative common bus supplies and common bus inverters. The common DC bus allows you to
optimize the sizing of the bus supply so that energy consumption remains strictly matched with the requirement of
the application.
• By packaging the combination of inverters and bus
supplies in different arrangements and ratings, you
can optimize a high power density system with a small
footprint
• Use one interface to configure and program the
converter and inverter using Studio 5000 Logix Designer
or Connected Components Workbench software
• Meets IEEE 519 standard (5% or less of total harmonic
distortion)
• Reduce the adverse effects of harmonic distortion
on adjacent electrical equipment and control system
instrumentation
• Optimize floor space, installation and hardware with
drives connected via common bus
• Corrected power factor helps reduce energy-related
expenses
–– R
emoves the need to wire AC power to each drive
individually
–– Reduces installation time, labor and cabling costs
–– DC bus built into each unit allows for easy
connection to adjacent units
–– Integrated control bus in each unit for efficient
distribution of auxiliary 24V, 240V, and an optional
120V throughout a cabinet line up
• Gain energy efficiency with coordinated motors that
share energy between regenerating and motoring loads
• The combination of lower harmonics and power factor
correction reduces the need to oversize your electrical
power equipment
• Maintain operation through most line disturbances with
AFE ride-through control
• Eliminate the need for external multi-phase transformers
or filters along with the associated wiring, labor,
installation and maintenance costs
• Minimize floor space requirements with built-in
components
• Scale your system with the ability to use the smaller
PowerFlex 753 and PowerFlex 755 drives in your
common bus system
PowerFlex 755TM Drive Systems
Common Bus Inverters
8
Regenerative Bus Supplies
400/480V
160…2000 kW / 250…3000 Hp
160…2000 kW / 250…3000 Hp
600/690V
250…2500 Hp / 200…2300 kW
250…2500 Hp / 200…2300 kW
Communications
Standard built-in dual ports for EtherNet/IP
Additional industrial network options
Safety Options
Safe Torque Off
Safe Speed Monitor
Ambient Temperature Ratings
40 °C
Up to 55 °C w/deratings
TotalFORCE Technology
Motor Control
Flux Vector Control
Sensorless Vector Control
V/Hz
Economizer
Enclosure Type
IP21, UL Type 1
IP54, UL Type 12
Information is preliminary, subject to change
Regenerative Bus Supply
Common Bus Inverters
5
5
7
7
4
4
1
2
3
6
6
8
6
1 AC Pre-charge module regulates the input AC current
from the incoming power source, greatly reducing stress
on the power components during power up.
2 LCL Filter is a 230 mm wide module that provides low
harmonic capability and minimizes the current distortion
into the utility grid.
3 Line side converter is a 230 mm wide module. In the
PowerFlex 755TM, it draws energy from the AC line without
harmonic distortion and converts it to DC power. It also
provides a means of regeneration back to the AC line.
A system of common bus drives (inverters) receives electrical
power from a common DC bus powered by the regenerative
bus supply. This system supports multiple combinations
of inverters to the limit established by the capacity of the
regenerative bus supply.
4 Motor side inverter is a 230 mm wide module that controls the
voltage and current of the motor.
5 IP21/IP54 enclosures provide a choice of packaging options to
meet the environmental requirements of your application.
6 Control pod contains the control platform that is responsible
for motor control, system control and communications. Five
option slots allow you to add I/O, safety and feedback. There is
one control pod for each common bus inverter and one for the
regenerative bus supply.
7 DC Pre-charge regulates the input DC current from the
incoming power source, greatly reducing stress on the power
components during power up. It also provides a means of
isolating the inverter from the DC bus for service or maintenance.
8 Roll in/roll out design makes the drive easy to install and
service by allowing complete removal of a module from cabinet,
providing generous room for wiring behind the drive.
Power wiring can stay connected while unit is rolled out.
Information is preliminary, subject to change
9
PowerFlex 755T Drive Solutions
Maximize System Performance
Control
Safety Options
• Active Front End ride-through control helps reduce downtime
by regulating the DC bus voltage independently of the
incoming AC voltage. This allows your equipment to keep
running through many power quality disturbances
Help protect personnel and assets while reducing downtime
with the safety option that best fits your application.
• Achieve high performance without tuning by using Load
Observer and Adaptive Tuning
• Drive control modes include speed, torque and position
control to support multiple application types
• Patented common mode noise reduction
• Selectable high-performance motor control algorithms with
TotalFORCE Technology includes flux vector, sensorless vector,
V/Hz and Economizer
• DeviceLogix™ embedded control technology
• Application specific features: TorqProve™ helps confirm control
of the load in lifting and hoisting applications
• Thermal manager provides dynamic control of your power
components for increased thermal life
• Predictive maintenance features help improve productivity by
predicting remaining life span of fans, relay contacts, power
devices and capacitors
Communications
• Built-in dual ports for EtherNet/IP
• Safe Torque Off is ideal for safety-related applications that
benefit from removal of rotational power to the motor without
removing power from the drive. It provides a quick return to
operation after a demand on the safety system and helps
reduce wear from repetitive machine start-ups.
• Safe Speed Monitor provides a solution for applications that
can benefit from access to a safety zone while there is limited
motion. It helps you safely monitor and control the speed of
your application which allows operators to perform process or
maintenance work without stopping the machine
Hardware
• Select the enclosure type to best meet the environmental
requirements of your application
–– IP21 enclosure
–– IP54 enclosure
• Modular construction for ease of installation and maintenance
• Roll in / roll out design makes the drive easy to install and
service by allowing complete removal of a module from
cabinet. Power wiring stays connected while unit is rolled out
• PowerFlex 755T control pod is common across all drives
• Options available for: ControlNet, DeviceNet, BACNet,
PROFIBUS DP, PROFINET
• Patented slot-based hardware structure for control and
selectable I/O, feedback, communication and safety options
Feedback
• Standard conformal coating on all printed circuit boards
• Auxiliary control power available
• Universal feedback, encoder and dual encoder feedback
options
• Regenerative and non-regenerative Active Front End
• Universal feedback option includes two channels for encoder
feedback. Encoder support includes incremental, EnDat,
Hiperface, SSI and BiSS
• High capacity bus option for PowerFlex 755TM up to 4700A
distribution
• Automatic switchover to secondary encoder or encoderless
mode in the event of feedback loss
Energy Savings
• Regeneration
• Power factor correction
• Option for built-in DV/T filters to reduce reflective wave
• Blown fuse indication and feedback
Programming and Commissioning
• LCD Human Interface Module (HIM) features an assisted startup utility to reduce start-up time and allow easy configuring
and tuning of the drive
• Software tools to assist with programming, configuration,
monitoring, and troubleshooting: Studio 5000 Logix Designer
and Connected Components Workbench
• Flash upgradeable
10 Information is preliminary, subject to change
Technical Specifications - Preliminary Information, Subject to Change
PowerFlex 755TL Drives
PowerFlex 755TR Drives
PowerFlex 755TM Drive Systems
Ratings 400V
160…1250 kW
160…2000 kW
Common Bus Inverter: 160…2000 kW
Regenerative Bus Supplies: 160…2000 kW
Ratings 480V
250…1800 Hp
250…3000 Hp
Common Bus Inverter: 250…3000 Hp
Regenerative Bus Supplies: 250…3000 Hp
Ratings 600V
250…1500 Hp
250. . . 2500 Hp
Common Bus Inverter: 250…2500 Hp
Regenerative Bus Supplies: 250…2500 Hp
Ratings 690V
200…1400 kW
200…2300 kW
Common Bus Inverter: 200…2300 kW
Regenerative Bus Supplies: 200…2300 kW
Communications
• Built-in dual EtherNet/IP ports
• ControlNet
• DeviceNet
• BACNet
Safety Options
• Safe Torque Off
• Safe Speed Monitor
Ambient Temperature
Ratings
• 40 °C without derating
• Up to 55 °C with derating
Storage Temperature
-40…70 °C (-40…158 °F)
Relative Humidity
Operation: 0…95% non-condensing
TotalFORCE Technology
Motor Control
Flux vector, sensorless vector, V/Hz and Economizer
Velocity Regulator Bandwidth 300 Hz (1885 Radians per second)
Position Regulator Bandwidth 207 Hz (1301 Radians per second)
Motor Control
Bandwidth*
• DNV
• ABS
• Lloyd’s Register
• ATEX
• IEC60721-3-3
• ISA 71.04-1985
Standards and
Certifications
Efficiency
• PROFIBUS DP
• PROFINET
94% at rated amps
Output Frequency
Range
Torque Accuracy
EMC Category
Altitude
Shock & Vibration
• EAC Mark
• UkrSepro Mark
• KC Mark
• CE Mark
• ODVA EtherNet/IP
• SEMI F47
• AC156 Seismic Standard
• UL61800-5-1 (cULus)
• CAN/CSA
• Regulatory Compliance Mark
94% at rated amps
Bus Supplies: 96% at rated amps
Common Bus Inverters: 96% at rated amps
• 0…325 Hz @ 1.33 kHz carrier
• 0…325 Hz @ 2 kHz carrier
• 0…590 Hz @ 4 kHz carrier
Above 5% of motor base speed: 2% of rated torque
Below 5% of motor base speed: 5% of rated torque
C3 when system is solidly grounded
1000 m without derate; up to 5000 m with derate
Power core, drive in cabinet with option bay – 1.000 mm (0.040 in.) displacement, 1 g peak
* -3 dB Crossing (Closed Loop) specifications
Information is preliminary, subject to change
11
Entry
Wiring
Bay
Height
755TL Drive
Exit
Wiring
Bay
Depth
Combined Width
PowerFlex 755TL Drives
Input
Voltage
Normal Duty
Rating
400
160…400 kW
480
250…650 Hp
600
250…550 Hp
690
200…500 kW
400
400…800 kW
480
650…1100 Hp
600
550…1000 Hp
690
500…900 kW
400
800…1250 kW
480
1100…1800 Hp
600
1000…1500 Hp
690
900…1400 kW
Width
Dimensions are in millimeters and (inches). Weights are in kilograms and (pounds).
Combined Width - Drive with
Optional Wiring Bays
Depth
Height
Drive
with
Entry Bay
with
Exit Bay
with
Both Bays
IP21
IP54
1200 (47.2)
*
1600 (63.0)
*
675 (26.6)
720 (28.3)
2000
(78.7)
*
2400
(94.5)
*
675 (26.6)
3200
(126.0)
3600
(141.7)
3600
(141.7)
4000
(157.5)
675 (26.6)
Weight
with
Filter
without
Filter
2132 (83.9) 2291 (90.2)
861.8
(1900)
920.8
(2030)
720 (28.3)
2132 (83.9) 2291 (90.2)
1360.8
(3000)
1419.7
(3130)
720 (28.3)
2132 (83.9) 2291 (90.2)
2925.7
(6450)
3043.6
(6710)
IP21
IP54
* Optional wiring bay is not required for top entry of power cables.
Simplify installation with optional entry and exit wiring bays.
Entry and exit wiring bay options provide the flexibility and convenience for cable entry and exit through the top of the cabinet.
12 Information is preliminary, subject to change
Entry
Wiring
Bay
Height
755TR Drive
Exit
Wiring
Bay
Depth
Combined Width
PowerFlex 755TR Drives
Input
Voltage
400
480
600
690
400
480
600
690
400
480
600
690
400
480
600
690
400
480
600
690
Normal Duty
Rating
Width
Drive
160…400 kW
250…650 Hp
1200 (47.2)
250…550 Hp
200…500 kW
400…800 kW
650…1100 Hp
2000
(78.7)
550…1000 Hp
500…900 kW
800…1250 kW
1100…1800 Hp
3200
(126.0)
1000…1500 Hp
900…1400 kW
1200…1650 kW
1800…2400 Hp
3800
(149.6)
1500…2000 Hp
1400…1800 kW
1650…2000 kW
2400…3000 Hp
4600
(181.1)
2000…2500 Hp
1800…2300 kW
Dimensions are in millimeters and (inches). Weights are in kilograms and (pounds).
Combined Width - Drive with
Optional Wiring Bays
with
with
with
Entry Bay Exit Bay Both Bays
Depth
Height
IP21
IP54
IP21
Weight
IP54
with
Filter
without
Filter
*
1600
(63.0)
*
675 (26.6)
720 (28.3)
2132 (83.9) 2291 (90.2)
861.8
(1900)
920.8
(2030)
*
2400
(94.5)
*
675 (26.6)
720 (28.3)
2132 (83.9) 2291 (90.2)
1360.8
(3000)
1419.7
(3130)
3600
(141.7)
3600
(141.7)
4000
(157.5)
675 (26.6)
720 (28.3)
2132 (83.9) 2291 (90.2)
2925.7
(6450)
3043.6
(6710)
4600
(181.1)
4600
(181.1)
5400
(212.6)
675 (26.6)
720 (28.3)
2132 (83.9) 2291 (90.2)
3447.3
(7600)
3565.2
(7860)
5400
(212.6)
5400
(212.6)
6200
(244.1)
675 (26.6)
720 (28.3)
2132 (83.9) 2291 (90.2)
4286.0
(9450)
4463.3
(9840)
* Optional wiring bay is not required for top entry of power cables.
Simplify installation with optional entry and exit wiring bays.
Entry and exit wiring bay options provide the flexibility and convenience for cable entry and exit through the top of the cabinet.
Information is preliminary, subject to change
13
Height
Control
Bay
Common Bus
Inverter
Exit
Wiring
Bay
The Common Bus Inverter
is positioned to the right of
the Common Bus Supply.
Depth
Combined Width
PowerFlex 755TM Common Bus Inverter
Input
Voltage
Normal Duty
Rating
400
480
600
690
400
480
600
690
400
480
600
690
400
480
600
690
400
480
600
690
160…400 kW
250…650 Hp
250…550 Hp
200…500 kW
400…800 kW
650…1100 Hp
550…1000 Hp
500…900 kW
800…1250 kW
1100…1800 Hp
1000…1500 Hp
900…1400 kW
1200…1650 kW
1800…2400 Hp
1500…2000 Hp
1400…1800 kW
1600…2000 kW
2400…3000 Hp
2000…2500 Hp
1800…2300 kW
Select one inverter for each motor.
For every inverter, a control pod is
required. A control bay can hold
up to two control pods.
Dimensions are in millimeters and (inches). Weights are in kilograms and (pounds).
Control
Bay *
Width
Inverter
Bay
Exit Wiring
Bay
Depth
Height
IP21
IP54
IP21
300 (11.8)
400 (15.7)
400 (15.7)
675 (26.6)
720 (28.3)
300 (11.8)
600 (23.6)
400 (15.7)
675 (26.6)
300 (11.8)
800 (31.5)
400 (15.7)
300 (11.8)
1200 (47.2)
300 (11.8)
1400 (55.1)
Weight
IP54
DC
Fuse
DC
Precharge
2132 (83.9)
2291 (90.2)
250.0 (551)
286.0 (630)
720 (28.3)
2132 (83.9)
2291 (90.2)
499.0 (1100) 571.5 (1260)
675 (26.6)
720 (28.3)
2132 (83.9)
2291 (90.2)
748.4 (1650) 857.3 (1890)
800 (31.5)
675 (26.6)
720 (28.3)
2132 (83.9)
2291 (90.2)
997.9 (2200)
1143.1
(2520)
800 (31.5)
675 (26.6)
720 (28.3)
2132 (83.9)
2291 (90.2)
1247.4
(2750)
1428.8
(3150)
* Each inverter requires a control pod. A control bay can hold two control pods.
Exit wiring bay option provides the flexibility and convenience for cable exit through the top of the cabinet.
14 Information is preliminary, subject to change
Height
Entry
Wiring
Bay
Common Bus Supply
The Common Bus Supply
is positioned to the left of
the Common Bus Inverter.
Depth
Combined Width
PowerFlex 755TM Common Bus Supplies
Input
Voltage
Normal Duty Rating
400
480
600
690
400
480
600
690
400
480
600
690
400
480
600
690
400
480
600
690
160…400 kW
250…650 Hp
250…550 Hp
200…500 kW
400…800 kW
650…1100 Hp
550…1000 Hp
500…900 kW
800…1250 kW
1100…1800 Hp
1000…1500 Hp
900…1400 kW
1200…1650 kW
1800…2400 Hp
1500…2000 Hp
1400…1800 kW
1650…2000 kW
2400…3000 Hp
2000…2500 Hp
1800…2300 kW
Dimensions are in millimeters and (inches). Weights are in kilograms and (pounds).
Depth
Height
Weight
Width of Bus
Supply
Width with
Optional
Entry Bay
IP21
IP54
IP21
IP54
with
Filter
without
Filter
1000 (39.4)
*
675 (26.6)
720 (28.3)
2132 (83.9)
2291 (90.2)
648.6 (1430)
589.7 (1300)
1400 (55.1)
*
675 (26.6)
720 (28.3)
2132 (83.9)
2291 (90.2)
920.8 (2030)
861.8 (1900)
2400 (94.5)
2800 (110.2)
675 (26.6)
720 (28.3)
2132 (83.9)
2291 (90.2)
2295.2 (5060) 2177.2 (4800)
2600 (102.4)
3400 (133.9)
675 (26.6)
720 (28.3)
2132 (83.9)
2291 (90.2)
2567.3 (5660) 2449.4 (5400)
3200 (126.0)
4000 (157.5)
675 (26.6)
720 (28.3)
2132 (83.9)
2291 (90.2)
3216.0 (7090) 3039.1 (6700)
* Optional wiring bay is not required for top entry of power cables.
Entry wiring bay option provides the flexibility and convenience for cable entry through the top of the cabinet.
Information is preliminary, subject to change
15
Rockwell Automation Services & Support
Global Support. Local Address. Peace of Mind.
Providing the resources you need, when and where you need them, Rockwell Automation
has an integrated, global network of ISO-certified repair centers, exchange hubs, field
service professionals, IACET-recognized training centers, certified technical phone
support centers and online tools.
www.rockwellautomation.com/go/services
Meet Your Everyday Technical Needs
Remote Support & Monitoring
Training Services
OnSite Services
Repair Services
• Real-time product, system and
application-level support
• Instructor-led and computer or
web-based courses
• Embedded engineering
• Product remanufacturing
• Unlimited online resources
and tools
• Virtual classroom
• Preventive maintenance
• Migrations and conversions
• Repair services on a full range
of industrial automation brands
and products
• Live chat and support forums
• Workstations and job aids
• Secure equipment monitoring,
alarming and diagnostics
• Training assessments
• Start-up and commissioning
• Annual repair agreements
Maximize Your Automation Investment
MRO Demand Management
Lifecycle Extension & Migrations
Network & Security Services
• Comprehensive asset
management planning
• Installed Base Evaluation™
• Control system lifecycle services
• Reliability services
• Pinpoint obsolescence risk
• Manage network convergence
• Tools and lifecycle support
service agreements to mitigate
production risk
• Security technology, policies and
procedures services
• Warranty tracking
• Quick access to global
spare parts inventory
Safety Services
• Safety assessments
and remediation
• Safety design, integration
and validation services
Visit the Rockwell Automation Support Center at www.rockwellautomation.com/knowledgebase
for technical information and assistance, plus:
• View technical/application notes • Subscribe for product/service email notifications
• Obtain software patches • Submit a Question, Live Chat, Support Forums and more
Visit Get Support Now at www.rockwellautomation.com/go/support to select your country and find your local support information.
Connect with us.
Allen-Bradley, Connected Component Workbench, DeviceLogix, Integrated Architecture, LISTEN. THINK. SOLVE, PowerFlex, Studio 5000, Studio 5000 Logix Designer are trademarks of Rockwell Automation, Inc. ControlNet,
DeviceNet and EtherNet/IP are trademarks of the ODVA. PROFIBUS is a trademark of PROFIBUS & PROFINET International. Trademarks not belonging to Rockwell Automation are property of their respective companies.
www.rockwellautomation.com
Publication 755T-BR001A-EN-P - February 2016
Copyright © 2016 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.