Download TECHNICAL REQUIREMENTS FOR AUDIO RECORDINGS made

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts
no text concepts found
Transcript
RECORDING STUDIO „ARS SONORA”
ul. Jaworowa 7B, Rąbień AB
95-070 Aleksandrów Łódzki
Tel. 601774473, e-mail: [email protected], www.ars-sonora.pl
TECHNICAL REQUIREMENTS FOR AUDIO
RECORDINGS
made by „Ars Sonora” Studio









The customer provides access to a well-functioning, grounded electrical
installation with the following parameters: 230 V AC (alternating current) 50
Hz, stable voltage with no fluctuations, surges, etc. It is important to make
sure, that our equipment is not on the same phase as the lighting controllers
(thyristor dimmer units, etc.) which can be electrically very noisy.
Responsibility for fulfilling all financial, formal and legal issues pertaining to
rent of the room, in which recording will be made (hall, church) rests with the
customer.
When choosing time frame in which the room will be available please consider
the fact, that recording is a long process. Comfort at work and creative
atmosphere can be efficiently disrupted by unnecessary haste.
Should the recording take more than one day and be made further than 50 km
away from „Ars Sonora” Studio (Poland-Łódź) – the customer provides
accommodation for the recording team at his own expense. Most of recordings
are performed by one or two people, in case of more complex works the team is
comprised of more people.
Customer ensures a direct route to recording location for the car which
transports the recording equipment. If this place is e.g. in a restricted area (paid
parking zones, historic objects etc.) – then the customer settles this matter with
facility administrators or other appropriate services appointed to allow access
to a given area.
It takes about two hours to assemble and properly configure the recording gear
and about one hour to disassemble it. Customer must take this into account
when obtaining clearance for our car to enter a restricted area from the
respective services and when arranging time period in which the facility is
available for recording purposes.
Customer is responsible for ensuring silence during recording. Our company
cannot be held responsible if situation occurs, when noise from the outside or
inside the facility makes it unable to perform a clean, good recording.
Customer provides a table and stable (not cracking) chairs.
We remind of the need for preparation and tuning the instruments – this
especially important for organ and piano recordings. With organ recordings we



suggest, that the customer ensures presence of an organ building company
during recording – this allows us to save precious time in case the need for
tuning corrections and removing minor instrument failures emerges during
recording.
In case of choir and symphonic recordings we would like the conductor or
band leader to pass our request to all band members, considering proper
clothing: woolen, polar jackets, etc. are recommended, avoid nylon coats and
other noisy fabrics. In case of recordings made in autumn-winter season,
especially in cold churches, we recommend taking warm clothing and thermos
with tea\coffee with you.
Presence of bystanders (observers, artist’s family members, etc.) is not
recommended, because of the generated noise, and also certain demobilization
and distraction of artists. If the customer scheduled a photo report from
recording, it is possible only in the exact time period agreed earlier with us, e.g.
before or after recording. Camera snapshots are specifically hard and difficult
to remove from recorded material.
Ordinarily the edition and montage of the audio material in carried out in our
studio in Łódź. However if in special cases the initial montage and edition of
the material is supposed to take place at the recording site, the customer
provides a room with the best possible acoustic properties – silent, without
noise and reverb.