Download Power Panel for SDN

Power Panel for SDN
Q
UALITY
CERTIFIED
P
Item #: 1870259
E
R O
M I S
OVERVIEW:
The Power Panel for SDN is a SDN bus distribution component used to add 10 isolated
motor ports and two isolated device ports to an SDN bus segment. The isolated motor
ports support up to 240 feet of power and data wiring to individual low voltage intelligent
motors. The in-wall or on-wall mountable enclosure offers separated line and low voltage
areas for ease of installation. This product could be used in small SDN systems with two
control devices and 10 individual motors as a stand alone solution.
SOMFY DIGITAL NETWORK SYSTEM OVERVIEW:
TECHNICAL SPECIFICATIONS:
Somfy Digital Network (SDN) is Somfy’s intelligent wired shading network. An SDN
system is comprised of bus distribution devices that create a network for user interfaces,
motorized applications and sensors to be connected. SDN is scalable, and suitable for both
small and large projects, and the same components are used whether an SDN system
remains standalone, integrated into third party automation systems, or with Somfy’s
animeo® IP automated total solar management system.
■■
■■
■■
FEATURES SUMMARY:
■■
■■
■■
■■
■■
■■
SDN INPUT
10 isolated low voltage motor ports
2 isolated device ports
Includes bus segment status LEDs for;
• Power
• Communication
• End of line notification
Protects system components from miswire
Automatic segment termination
Can mount on-wall on in-wall
(between studs)
Separated line and low voltage areas
Front cover includes a keyed lock
MOTOR INPUT
• To motors:
1 - Data +
2 - Data 3 - N/A
4 - Power +
5 - Power +
6 - N/A
7 - Ground 8 - Ground -
■■
◦◦
For power and data distribution, use the SDN Low-voltage Motor Power and
Data CableItem #: 9020126, 9020127 (offered through Liberty AV Solutions)
WHAT’S IN THE BOX:
■■
■■
■■
Power Panel for SDN
(10) Low-voltage motor to panel connectors
Instructions
CONNECTIONS AND INDICATORS:
Up to 240ft with 2 Conductor 14AWG wire for
Power and 1 Cat-5e or higher for communication
per motor port
◦◦ Up to 150ft with 2 Conductor 16AWG wire for
Power and 1 Cat-5e or higher for communication
per motor port
◦◦ Up to 100ft with 2 Conductor 18AWG wire for
Power and 1 Cat-5e or higher for communication
per motor port
• To devices:
◦◦ Up to 800ft per device port
■■ Operating Temperature Range: Ambient temperature
■■ Shipping Weight: 24 lbs.
■■ Indoor use only
Motor Input Connector
ELEMENT
FUNCTION
1
Power Input
Flying leads with push-in conduit connection located on the bottom
right corner of the panel. Supports solid 12 & 14 AWG wiring.
2
SDN Bus Input
Input for Bus signals
P
3
SDN Bus Output
Output for Bus signals
H
4
Isolated Motor Port
10 low voltage motors to SDN network
5
Device Port
2 SDN devices to the SDN network (max. 800 ft. each)
4
E
2
3
ELEMENT
COLOR
FUNCTION ON
Isolated Motor Port
L
LED Indicators
LABEL
NOTE: Somfy recommends the use of the SDN Low-voltage Motor Power and
Data Cable (Item #: 9020126, 9020127) which provides maximum power
distance of 240' and communication in one cable.
Power +
Power Data +
Data Ground
■■
Power +
Power Data +
Data Ground
■■
CABLE PINOUTS:
■■
■■
■■
■■
Input: 120V AC, 7.2A
Motor Output: 24V DC 2A per motor output
SDN Power Units: Consumes 0 units on bus,
supplies 10 units per device port
Material: Steel Enclosure
Dimensions: 18.9” L 14.4” W x 3.5” H (Inner)
Dimensions: 21.3” L 16.4” W x 3.8” H (Inner with door)
Maximum Wiring Distance
FUNCTION OFF
D
P
Bus Power
Green
Power
No Power
H
Bus High (I)
Green
Data
No Data
L
Bus Low (A)
Green
No Data
Data
5
E
End of Bus
Yellow
End of Bus
Not End of Bus
D
D
Device LED
Green
Device port powered
Device port not powered
5
D
Front view
DIMENSIONS:
BEST WIRING PRACTICES
The diagram shown below is meant for illustrative purposes to show the connections from product to product. This device could be used in other
configurations than shown below.
■■ Adds 10 isolated motor ports and 2 isolated device ports to a system.
NOTE: Somfy recommends the use of the SDN Low-voltage Motor Power and Data Cable (Item #: 9020126, 9020127) which provides maximum power distance of
240' and communication in one cable.
Motor wiring distance up to 240ft with 2 Conductor 14AWG wire for Power and 1 Cat-5e or higher for communication per motor port
Maximum 800 ft. per isolated device port.
NOTE: Power is required on the Bus Input in order to utilize Bus Out.
MOTORS
Sonesse® 30 RS485 DC
Sonesse® 50 ULTRA RS485 DC
BUS IN
BUS OUT
BUS DISTRIBUTION
Power Pan
DN
el
S
RTS
S Receiver
RT
USER INTERFACES
xK
oFle eypad
ec
ansmit
ter
S Tr
RT
www.somfysystems.com
D-0058
Copyright Somfy Systems, Inc. 8/2016
■■
D
■■