Download Item Spec`s Spec`s with Sw DL 3155M21 CONVERSION MODULE

Item
DL 3155M21
Spec's
Spec's with Sw
CONVERSION MODULE - didactic equipment: - circuit blocks: analogue
to digital converter, digital to analogue converter, voltage to frequency
converter,
frequency to voltage converter - theoretical topics:
analogue signals and digital signals, unipolar codes, bipolar codes, the
A/D conversion, step A/D converters, A/D converter of parallel or flash
type, simple slope A/D converter, double slope A/D converter, the D/A
conversion, weighed resistance D/A converter, D/A converter with R-2R
network, voltage/frequency conversion, voltage/frequency conversion
with slope method, voltage/frequency conversion with charge balance
method. Fault simulation. It must be possible to perform the following
experiences: Analog/Digital converter, Digital/Analog converter,
Voltage/Frequency converter, Frequency/Voltage converters. The faults
must be inserted by microswitches mounted on the board; the module
must be provided with a EISA BUS 31+18 INTERFACE, connections and
test points by 2mm terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.
CONVERSION MODULE - didactic equipment: - circuit blocks: analogue to
digital converter, digital to analogue converter, voltage to frequency
converter, frequency to voltage converter - theoretical topics: analogue
signals and digital signals, unipolar codes, bipolar codes, the A/D
conversion, step A/D converters, A/D converter of parallel or flash type,
simple slope A/D converter, double slope A/D converter, the D/A
conversion, weighed resistance D/A converter, D/A converter with R-2R
network, voltage/frequency conversion, voltage/frequency conversion
with slope method, voltage/frequency conversion with charge balance
method. Fault simulation. It must be possible to perform the following
experiences: Analog/Digital converter, Digital/Analog converter,
Voltage/Frequency converter, Frequency/Voltage converters. The faults
must be inserted by software and by microswitches mounted on the
board. The module must be provided with a EISA BUS 31+18 INTERFACE
for connection to power supply and PC, with a software able to allow the
study of theoretical topics through PC with hyper textual navigation
according to the HTML standard. Connections and test points by 2mm
terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.