Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Regenerative circuit wikipedia , lookup
Opto-isolator wikipedia , lookup
Crystal radio wikipedia , lookup
Electric charge wikipedia , lookup
Electric battery wikipedia , lookup
Oscilloscope history wikipedia , lookup
Integrating ADC wikipedia , lookup
Spark-gap transmitter wikipedia , lookup
Battery charger wikipedia , lookup
Rechargeable battery wikipedia , lookup
RLC circuit wikipedia , lookup
Switched-mode power supply wikipedia , lookup
Physics 112 HW16 /6 Due Wednesday, 22 October 2014 RC01. Consider the circuit at right. The capacitor is initially charged so that the voltage across it is 10 V. The switch is closed at t = 0s. Calculate what R must be so that the capacitor is 90% discharged (10% of the original charge is left) in a) 10 ms, b) 10 s, and c) 10,000 s. RC02. In the circuit at right, the battery is ideal (no internal resistance) and the capacitor is initially uncharged. Calculate the value of C if the capacitor is 50% charged up a) 10 ms, b) 1 s, and c) 100 s after closing the switch. RC03. In the circuit at right, the capacitors are initially uncharged. How long after the switch is closed does the current go down to 20% of its original value? Your answer will be in terms of R and C. R C = 1 μF 100 Ω 10V (ideal) C R R V (ideal) C R C C RC04. Initially, the capacitor in the circuit at right is uncharged and switch in the switch is in position 2. The switch is put into position 1 so that position 2 switch in the capacitor begins to charge. After the switch has been in position position 1 1 for 10.0 ms, the switch is moved back to position 2 so that the capacitor begins to discharge. 15.0 μF 18.0 V a) Compute the charge on the capacitor just before the switch is (ideal) thrown from position 1 to position 2. b) Compute the voltages across the resistor and across the capacitor at the instant described in part (a). 980 Ω c) Compute the voltages across the resistor and across the capacitor just after the switch is thrown from position 1 to position 2. d) Compute the charge on the capacitor 10.0 ms after the switch is thrown from position 1 to position 2. RC05. (Toughie?) Consider the circuit at right. This convention is V = 18.0 V often used in circuit diagrams. The battery (or other power supply) is not shown explicitly. It is understood that the point at the top, labeled “18.0 V,” is connected to the positive terminal of 6.00 μF a 18.0 V battery having negligible internal resistance, and that the 6.00 Ω ground symbol at the bottom is connected to the negative terminal a b of the battery. The circuit is completed through the battery, even 3.00 Ω though it is not shown on the diagram. 3.00 μF a) What is the potential of point a with respect to point b when the switch is open? (The circuit has been like this for a long time.) b) Which point, a or b, is at the higher potential? c) What is the final potential of point b with respect to ground when the switch is closed? d) How much does the charge on each capacitor change long after the switch is closed? (over) RC06. (Toughie?) In the circuit shown at right, the capacitor is originally uncharged with the switch open. At t = 0 the switch is C closed. V R2 a) What is the current supplied by the battery just after the (ideal) R1 switch is closed? b) What is the current a long time after the switch is closed? c) Derive an expression for the current through the battery for any time after the switch is closed. d) After a long time t’ the switch is opened. How long does it take for the charge on the capacitor to decrease to 10 percent of its value at t = t’ if R1 = R2 = 5 kΩ and C = 1.0 μF? (over)