Download Product catalog 2013 - All

Document related concepts

Dental braces wikipedia , lookup

Transcript
Product catalog 2013
All Orthodontics services
all-ortho.be
648 Chaussée de Waterloo Steenweg à Bruxelles 1050 Brussel
Tél: 02/344.14.01& Fax: 02/346.03.05
[email protected], 0476/24.59.29
[email protected], 0471/95.72.80
LES MARQUES
Ortho Technology
Une exclusivité All Ortho, une gamme complète, des innovations, des produits
phares, une production localisée, bref un grand fabricant américain.
Lancer
Une gamme complète de matériel orthodontique présente partout dans le
monde depuis plus de 40 ans
Ortho Quest
Une gamme complète de matériel orthodontique.
G&H wire company
Tout est dans le nom Wire Company, G&H est la marque spécialisée dans les
arcs et fils que nous avons choisi de mettre en avant depuis une dizaine
d'années
Reliance
L'essentiel de nos produits de collage, ainsi que leurs contentions linguales
Gestenco
La marque suédoise du composite en brackets, des arcs recouverts d'epoxy et
de collage en milieu humide
Hu-Friedy
Le spécialiste américano allemand des pinces et instruments et des solutions
d'entretien / stérilisation des instruments
Task
La marque japonaise la plus répandue sur nos marchés avec des pinces
innovantes et de qualité.
Medesy
L'offre de pinces ne seraient pas complète sans la célèbre marque italienne
spécialisée dans les instruments de précision et pinces spécifiques ortho.
Bontempi
Une nouvelle marque chez All Ortho, de longues années sur le marché
allemand. La qualité, la précision, la finition et la finesse germanique s'associe
avec la garantie de longévité et des prix accessibles.
Dentronix, Etm, Aez
Ces 3 marques complètent le tableau des fabricants de pinces et prouvent leur
originalité dans l'élaboration de modèles spécifiques
Huckert's et l'Umonium
Le célèbre fabricant belge, nous permet de vous proposer 2 vastes gammes de
produits : la désinfection à froid de vos instruments, plan de travail, matériel, ...
et la désinfection associée aux soins pour votre hygiène personnelle ( savon, gel
désinfectant, air control )
Medartis
Une attelle de trauma en titane. Idéale !
Tp, Dentaurum,
Deux grandes marques génériques orthodontiques
Forestadent
Ortho-Organizer
Une marque innovante dans bien des accessoires comme les Rotators, Twin
Bite, ...
Ortho tain et Occluso
Plus qu'une simple gouttière, une partie intégrante de traitement
guide
Les produits
La palette complète des Oral Screen, Trainers, EZ Splint, Snorflex
myofonctionnels
Ortho post
Les gouttières de fin de traitement par excellence avec 2, 4 ou sans extraction
Lewa
La firme allemande vous fera découvrir une large gamme de vérins et fils en
bobine
Statim, Hager & Werken,
De quoi trouver la solution en appareils de stérilisation et/ou d'autoclavage
Elma, Dentronix,
Itena
Lampe photo sur socle
Heine
Spécialiste en matériel de diagnostic, Heine apporte son expérience dans
l'optique avec les loupes binoculaire pour praticiens.
Tempur
Coussin et matelas
DE MERKEN
Ortho Technology
Een exclusiviteit van All Ortho met een complete gamma,
innovatief,topproducten, een lokale productie…kortom, een grote
Amerikaanse fabrikant !
Lancer
Een complete gamma orthodontische producten, over de hele wereld en
reeds meer dan 40 jaar !
Ortho Quest
Een complete gamma orthodontisch materiaal
G&H wire company
Alles zit in de naam Wire Company,G & H is het merk gespecialiseerd in
draden en bogen dat wij reeds meer dan 10 jaar vooropstellen !
Reliance
Belangrijk binnen het gamma lijmen, evenals de linguale retentie.L'essentiel de
nos produits de collage, ainsi que leurs contentions linguales
Gestenco
Het Zweedse merk van composiet brackets,bogen met epoxy en het lijmen in
vochtig milieu.
Hu-Friedy
De Duits-Amerikaanse specialist in tangen en instrumenten, alsook
onderhoud/sterilisatie van instrumenten.
Task
Het meest gepropageerde Japanse merk binnen de markt met kwalitatieve
en innovatieve tangen .
Medesy
Het aanbod van tangen is pas compleet in aanwezigheid van dit bekende
Italiaanse merk gespecialiseerd in precisie – instrumenten en tangen specifiek
voor ortho.
Bontempi
Een nieuw merk bij All Ortho, reeds lang op de Duitse markt. De Duitse
kwaliteit,precisie,afwerking en finesse staan garant voor een lange levensduur
en aantrekkelijke prijzen.
Dentronix, Etm, Aez
Deze 3 merken vervolledigen het lijstje van tangenfabrikanten en bewijzen hun
originaliteit door het vervaardigen van specifieke modellen.
Huckert's et l'Umonium
De befaamde Belgische fabrikant stelt ons in staat 2 productengamma’s aan
te bieden : de koude desinfectie van uw
instrumentarium,werkvlakken,materiaal…en de hygiënische desinfectie voor
persoonlijk gebruik ( zeep, gel, air control).
Medartis
Een posttraumatische zekeringspalk in het beste titanium !
Tp, Dentaurum,
Grote merken van generische orthodontieproducten.
Forestadent
Ortho-Organizer
Een innoverend merk binnen de accessoires zoals Rotators, Twin Bite,…
Ortho tain et Occluso
Meer dan een gewone positionner, maakt deel uit van de behandeling.
guide
Les produits
Het volledige gamma Oral Screen, Trainers,EZ Splint,Snorflex.
myofonctionnels
Ortho post
Bij uitstek de positionner voor einde behandeling met 2,4 of geen extracties
Lewa
Deze Duitse firma biedt u een uitgebreide gamma van veren en draad op spoel
aan.
Statim, Hager & Werken,
De oplossing voor sterilisatietoestellen en autoclaven.
Elma, Dentronix,
Itena
Fotolamp op sokkel
Heine
Als specialist in diagnostisch materiaal levert Heine zijn bijdrage in de optiek
met de binoculaire loepen.
Tempur
Hoofd – en ligkussens.
SECTION I :
Brackets, Bands & Tubes
Pg 1-4
Archwires, Wires & Accessories
Pg 5-24
Elastomerics, Ligatures & Retainers
Pg 25-31
Bonding, Cements & Retracors
Pg 32-37
Facebows, Headgears & Appliance
Pg 37-43
Equipment & Laboratory
Pg 44-57
Hygiene & Accessories
Pg 58-61
Pliers, Instruments & Accessories
Pg 62-79
Pedondontie
Pg 80-81
SECTION II :
SECTION III :
SECTION IV :
SECTION V :
SECTION VI :
SECTION VII :
SECTION VIII :
SECTION IX :
Pg 1
SECTION I
Brackets, Bands and Tubes
1.1°/ BRACKET Intrigue Whisper Viva
A Cut Above
All Others.
Built on the smallest completely translucent bracket available, Intrigue
Whisper Viva Diamond Brackets are simply unparalleled-the most exclusive
option for a new beautiful smile.
Each upper anterior features an inset 1mm finely cut diamond. Never before
have aesthetic braces been this efficient, comfortable & stunning!
Intrigue Whisper Viva brackets function and bond exactly the same way as other aesthetic brackets offered
by Lancer Orthodonties. They are color-coded just like Intrigue Whisper brackets for easy of placement and ligate just
the same using standard elastomerics. Our line of Intrigue Whisper brackets is the strongest aesthetic bracket on the
market. Constructed from low-friction polycrystalline, Intrigue Whisper delivers a smooth and extremely discreet
design while maintaining the same efficiency and resilience as traditional metal bracket systems. Intrigue Whisper
Viva bracket is completely translucent and does not stain - making it virtually invisible through the entire duration of
treatment.
Available in Roth .018", .022,
Roth .018 + hk
# 946-913 V
Roth .022 + hk
# 946-932 V
Pg 2
1.2°/ BRACKET Intrigue
Silk with metal slot
Polycrystalline cultured alumina offers the highest combination of translucency and shock resistance. the
metal slot reduces friction and increases sliding mechanics as well as increasing the strength of the bracket. the
mechanical lock base offers increased bond strength and easy debonding. All brackets are available in complete
case setups - Redi-Pak (20 brackets), individual refills (1 per pack).
Lancer’s new composite bracket offers a viable and economic alternative to ceramic brackets. These highly
translucent brackets adapt to the patient’s tooth shade. The high density material used results in a bracket which is
extremely robust and resistant to fractures. The specialized heat treating system used enhances the sliding
mechanics ensuring ultimate control during treatment. All brackets are available in complete case setups - Redi-Pak
(20 brackets), individual refills (1 per pack).
Available : In Roth .018", .022, MBT .018"
Kit Roth .022 + hk
# 253-932
Kit MBT .022 + hk
# 259-932
ou .022 with T° neg on the anteriors, Ricketts .018
Kit Roth .018 + hk
# 253-931
Kit Ricketts
# 255-931
1.3°/ COPOLYMER ACRYLIC BRACKET
CLEAR BRACKET
Avair brackets are almost invisible on the teeth for near-perfect
aesthetics. These photos show how the brackets pick up and reflect
the color of the bases they are placed upon.
INNOVATIVE MATERIAL :
MECHANICAL LOCKING BASE
Avair™ brackets are made from a hybrid biocompatible
material that is a dispersion of Acrylic and two different
copolymers, with a small amount of polycrystalline
alumina for increased strength.
Avair™ brackets have a textured base for a secure
bond every time. No special adhesives, additional
coatings, or treatments are necessary.
CLINICAL BENEFITS
Avair™ brackets are clear and stain-resistant. The
material of the Avair™ bracket won’t deform during
treatment, delivers orthodontic forces without the brittle
and abrasive characteristics of sapphire or ceramic, but
its shore hardness prevents teeth from being damaged
as with ceramic brackets.
This bracket will not shatter or break during debonding.
• High material stability
• Maximum tie wing strength
• Torque fracture resistance, better than PCA ceramic
• High abrasion resistance
DEBONDING : We recommend an instrument who grips the entire bracket firmly at the bracket and tooth interface
to ensure a clean, smooth removal without breaking or shattering.
Available in Roth .022, .018, MBT or edgewise
Kit of 20 brackets en Roth .022 with hooks
Kit of 20 brackets en Roth .018.022 with hooks
Ref
# 460-902
# 460-901
Pg 3
1.4.1°/ PRAXIS
Manufactured using robotic MIM technology, Praxis
Brackets are known for their rhomboidal shape and scribe
line which runs through both the bracket and pad. These
features facilitate fast accurate placement. The slots are
milled with diamond blades guaranteeing precise
dimensions throughout the wall of the slot. Anatomically
designed 100 gauge mesh pads make bonding effortless
and ensure optimal adhesion.
Technique: Roth - M.B.T. - Hilgers - Ricketts STD
Advantages:
• Torque in the base
• Reduces number of wire bends
• Low profile
• Optimum patient comfort
• Large under tie wings area
• Easy to LIGATE
• Improved Pad anatomy especially on the
cuspids/bicuspids with mesial and distal anti-rotations.
Kit Roth .022 + hk
# 265-933
MBT .022 + hk
# 268-932
Kit Roth .018 + hk
# 265-934
MBT .022 ss hk
# 268-931
1.4.2°/ SINTERLINE SLOT VERTICAL
- Casting technology for a mini twin bracket
- Perfectly smooth rounded edges for a maximum
patient comfort and optimum control for the clinician.
Sinterline Plus is a two piece bracket with an anatomical
designed 80X80 gauge mesh pad which provides
maximum retention.
Advantages:
• Torque in base
• Compensating In/Out dimensions
• Vertical Slot option
• Tiewing Under Cuts Designed for Double Tieing
• Contoured Aesthetic Shape
Available : Roth - M.B.T. - Hilgers - Ricketts STD -
Kit Roth .022 Vslot + hk
# 249-932
Roth .018 Vslot + hk
# 249-931
Edg
Kit Roth .022 + hk
# 233-932
Roth .018 + hk
# 249-931
Pg 4
1.4.3°/ PRAXIS TOOTH-SHADED
The TS Tooth Shade color metal bracket is an aesthetic alternative to
ceramic brackets.
- The TS technology creates a tooth-shaded 17-4 stainless steel two-piece
bracket. The high clinical performance of a metal bracket is maintained
while giving your patients a more aesthetic alternative to the traditional
metal look.
- The Praxis TS will allow you to differentiate your clinical offering and provide
your adult and younger patients a mid-aesthetic alternative to a ceramic
bracket.
Kit Roth .022 + hk
# 275-932


1.4.4°/ BRACKETS AND BUCCAL TUBES NICKEL FREE
MIM bracket Nickel free with or without hooks
Available in Roth, Edgewise, Ricketts, Hilgers... en .018" ou .022".
Kit Roth .022 + hk, 521-100 –Roth .018 + hk 521-200 – Ricketts, 521-300
1.4.5°/ TP STRAIGHT-EDGE, ADVANT-EDGE, …
And accessories
A bracket bi-plot or quadri-plot with
color jigs, with or without Vslot,
Available in Roth / Hilgers .018", .022,and
Ricketts .018
FROM TP
ORTHODONTICS
1.4.6°/ BRACKETS :
Molar Brackets : Bracket Sinterline Vslot with large base
Spectrum :
With gingively offset base:
In Roth .018" ou .022". or Edgewise
This famous bracket Lancer
with V-Slot, hooks and two slot
in Roth .018" ou .022". ou
High-Torque
Kit Roth .018 + hk, 250-931 – Roth .022 + hk 250-932
A LOT OF OTHERS MODELS BY LANCER
Pg 5
SECTION II
ARCHWIRES, WIRES AND ACCESSORIES
2.1°/ WIRES AND ARCHWIRES
WIRE PERFORMANCE CHARACTERISTICS
Using an archwire without knowing its performance characteristics would be like
using brackets with unknown prescription values. Selecting wire products with
known qualities gives you the ability to apply force with quick, gentle and
expedient results. As a wire manufacturer, G&H® maintains total control of all
material specifications and production processes. By applying internationally
recognized quality standards in our production processes we can consistently
deliver world class quality to our customers.
G&H® Wire Company’s extensive wire inventory makes available multiple options
for every application. Make informed decisions using our unique performance
documentation; it guides you in selecting the most efficient options.
Formulate wire progression based on your ideal treatment objectives:
systematically maintain, increase or reduce applied force over various ranges of
activation. Use our performance documentation to create your own patientspecific custom techniques.
Our performance graphing is available in a convenient wall poster for quick reference. All performance
information provided is applicable only to G&H® brand wires and is neither intended to represent the wires offered
by other
orthodontic companies nor accurate for their products. In our analysis
of other wire manufacturers products, we are certain that our
documented wire performance is unique and no others match our
data consistently.
ARCH
FORMS
OPTIONS
The choice :
Pg 8
1. NITI, G4, et THERMAL M5
3. STAINLESS STEEL
N IT I, G 4 N IT I, T RI PL E F ORC E S G 4 N IT I
G4 N IT I + CR IM P A BL E STO P S , P R E-T OR QU E D
G4 N IT I , RE V ER S E CU R VE N IT I
RE V ER S E CU R VE P RE -T ORQ U E N IT I
ST A I NL E S S ST E EL , H E A T -T RE A TE D S T AI NL E SS
MUL T I- ST R A N D ST A I NL ES S , L OO P ED
PO ST E D
2. BETA TITANIUM
4. Bleach White toothcolored
5 Australian
6 Lingual
2.1.1°/ Niti in Lenghts or Spools
EVIDENCE BASED PERFORMANCE :
G&H® Wire Company announces: G4™ Nickel Titanium Archwires and Springs.
Offering significant functional enhancements to improve clinical performance.
G4™ Nickel Titanium Archwires are the culmination of years of research and
development by G&H® Wire Company. The uniquely enhanced performance and
consistency of G4™ NiTi is the result of material science pioneered by G&H®.
The G4™ alloy coordinated with proprietary G&H® manufacturing and testing
procedures guarantees the force, memory and elasticity properties are consistent as
documented.
- Available in round .010, .012, .014, .016, .018, .020
- Available in .014x.025, .016x.016, .016x.022, .016x.025, .017x.025, .018x.018, .018x.025, .019x.025, .020x.020, .020x .025 in
lengths
2.1.2°/ Packs of Niti G4 or Niti Thermal M5
10 forms, all sizes, .012, .013, .014, .016,.018, .020, or .016x.016, .017x.017, .018x.018, .020x.020, and .014x.025, .016x.022,
.016x.025, .017x.025, .018x.025, .019x.025, .021x.025,
25 arches / pack, dimpled or not, solo pack or not, pre-stopped or
not
G4 or m5 Europa II
EXTRA DISCOUNT BY QUANTITIES
Pg 9
2.1.3°/ TRIPLE FORCE G4 NITI
G4orce™ is a Triple Force G4™ NiTi wire with distinct zones offering progressive forces that increase from anterior to
posterior. Light anterior force, medium cuspid/bicuspid force and heavy molar force.
“Individual tooth movement is optimized when applied force synchronizes with anatomy and periodontal
physiology.”
Available in Trueform I and
Bioform III archforms.
Package of 10.
In .016, .018, .020, .016x.016,
.016x.022, .017x.025, .018x.018,
.018x.025, .019x.025, .020x0.020,
.021x.025
2.1.4°/ G4 Pre-Stopped
Eliminates the need to apply stops to
archwires.
Pre-loaded stops allow positioning as
desired then stay put until
crimped.Properly tempered stops
crimp easily and securely.
Available in Europa II
( Damon compatible )
In all the classic sizes and in toothcolored too
Pg 10
2.1.5°/ Pre torqued archwires :
“Torque and Expansion Concurrently – Now that’s a working wire that works!”
Damon-Compatible* Archwires developed in conjunction with Duncan Brown, BSC, DDS for Torque and Expansion
during the Working and Finishing Stages
DYB™ PRETORQUED TRANSITIONAL WIRES
G4™ Nickel Titanium
DYB™ PRETORQUED WORKING WIRES
3 Stainless Steel or B3™ Beta Titanium
THE ARCHFORMS:
- Europa™II Upper - Universal Damon*Compatible for Enhanced Finishing
- EFII 100% - Universal Damon*-Compatible
Archform
- EFII Large - 108% of Universal
- EFII X-Large - 116% of Universal
The "DYB" Pretorqued Archwire Series has proven to be clinically effective in
later stage arch development and uprighting
Also available in solo pack
Pg 11
2.1.6°/ Platinium Proportion Archforms :
“Achieve Platinium Proportion Finished Smiles - Routinely - with large or small !”
Small teeth and/or spacing can result in less than perfect smile
Pg 12
2.1.7°/ G4 Pre torqued Niti
G4™ Pre-torqued NiTi wires provide early and continuous translation of torque
forces to anteriors. Effective on upper or lower arches, there is 20° of torque built
into the anterior region of each wire. Torque forces can be applied labially or
lingually by reversing the orientation of the wire. Three anterior mm sizes allow
torque forces to be applied to upper or lower arch with choice of 3 wire sizes.
With or without pre-loaded stops
Available in
.016x.025, .017x.025 or in
.019x.025, .021x.025
in Trueform I or Europa II
( pack of 5 )
with 20° torque anterior. 3 sizes
28, 34, 38 mm
2.1.8°/ G4 Reverse Curve Pre-torqued
Reverse Curve NiTi wires with 20° pre-torqued anterior
segments increase torque control during intrusion.
Lingual root torque is applied in upper archwires. Lower wires
offer the choice of lingual or labial root torque.
Reverse Curve Pre torqued available in 2 archforms
Reverse Curve I and reverse curve Europa II
Available in
.016x.025, .017x.025 or in .019x.025,
.021x.025
in Trueform I or Europa II
( pack of 5 )
with 20° torque anterior. 3 sizes 28,
34, 38 mm
Pg 13
2.1.9°/ Reverse Curve Niti in G4 or M5
Manufactured in both G4™ and M5™ NiTi formats, Reverse Curve wires provide excellent counter forces to achieve
bite modifications quickly and efficiently, while also improving archform integrity.
Reverse Curve I Upper / Lower
Reverse Curve II
Reverse Curve III Upper / Lower
Available : .012 to .020 or .016x.016 to .021x.025
G4 Reverse Curved Europa II Upper Archform
G&H® Wire introduces Reverse Curve Wires in a true Damon*Compatible Archform. G&H’s know famous Europa™II Upper is
available in a Reverse Curve - with or without crimpable stops.
Available .013 to .018 or .014x.025 to .020x.020
2.2°/ Beta3 Titane Molybdène
The moderate force alternative to Stainless Steel Archwires.
! Nickel-Free !
Our BT3™ Beta Titanium alloy provides force levels that are 45% less than those of equivalent stainless steel arches.
BT3™ is the Beta Titanium III alloy representing the latest material science available in Titanium Molybdenum
archwires. ( BT3™ wire contains no nickel )
Choice between :
5 archforms or straight lengt or with T loop
Available in : .016, .018, .016x.016, .018x.018, .020x.020
Available in pack of 10 or in solo pack
.016x.022, .017x.025, .018x.025, .019x.025, .021x.025
Pg 14
2.3°/ Stainless Steel
or XR1 Heat treated
Stainless Steel
Our new XR1™ Stainless Steel is
uniquely heat-treated and stressrelieved – increasing the resiliency
of the wire to improve mechanics.
G&H® uses only 304v medical grade stainless steel wire in forming these archwires. By acquiring our wire from the
finest stainless steel processing houses, G&H® can assure its customers a product high in quality and consistent in
performance. In addition, G&H® uses state of the art forming equipment which ensures product integrity, consistent
performance characteristics and precise archforms.
All sizes, 10 archforms pack of 25 or solo pack
2.3.1°/ Stainless Steel Looped
The product that launched G&H®, our looped retraction arches are still
individually formed to exacting standards. Available in stainless steel as
listed on this page, and T-Loops are also available in BT3™ Beta
Titanium. Keyhole Loops, Teardrop Loops and T-Loops allow clinicians a
choice of 3 distinct designs. These loops make a stainless (or Beta
Titanium) archwire a multipurpose treatment adjunct that can achieve
various intraoral objectives, often simultaneously. Such objectives can
include:
Friction-free Segmented retraction
• Opening or closing spaces
• Intruding or Extruding anterior teeth
• Opening or closing the bite
• Leveling the curve of Spee
• Engaging Class I, II, III or up-and-down elastics
• Torquing the anterior or posterior teeth
• Attaching J-hooks for headgear in retracting anterior teeth
Keyhole, available since .016, .020, .016x.016 to .021x .025, 2 o 4 loops
T-Loop, available since .016x.022 to .019x .025, 2 loops
Teardrop, available since .016x.022 to .018x .025, 2 o 4 loops
Pg 15
2.3.2°/ Posted Archwires
Our exclusive “XR1™” Ball Post archwires offer the comfort and retention of
ball ends plus a bendable brass post.
Our straight post & ball end post stainless
steel posted arches have .030" silver
soldered brass posts.
A G&H® proprietary soldering technique ensures clean, strong and
consistent joints. The .016x.022, .016x.025 or .019x.025 XR1™ stainless base
wire is heat-treated and stress relieved increasing the resiliency of the wire
to improve mechanics.
Archforms available are Damon*-compatible, MBT Ovoid or MBT Tapered.
Sized in 2mm increments, upper
archwires are available in 34 to 44 mm
sizes, lower in 22 to 32mm.
Available in Trueform, Europa I and II,
since .016 until .021x.025
Brass Ball End Posts Provide : Patient Comfort, Maximum Retention, Adaptability
G&H® Proprietary Solder Technique : Strong, Secure & Smooth Joints, No Archwire
Annealing
XR1™ Heat-Treated Stainless Base Wire : Increased Resiliency, Minimizes Distortion
Available in Bioform III, Europa I and II, since .016x.022 until .021x.025
2.3.3°/ Toothcoated or Bleach white G4 or St Steel polymer coating
G&H®’s polymer coated Tooth-Colored wire system is
manufactured in both G4™ NiTi and S304 Stainless Steel.
The tooth-colored polymer coating is extremely durable
and does not change the dimension of the wire.
Wire sequencing can remain unchanged since force
values and performance is the same as non-coated wires.
Two shades available - Tooth-Colored and
Bleach-White.
Available in Trueform™I, Europa™I and
Europa™II
Since .013 to .020 and .014x.025 since
.019x.025, In Truform, Europa I and II
Polymer coating ensures:
• No dimensional change
• Durability - flake resistant
• Full dimensional expression of wire
properties
Pg 16
2.4°/ Multi Strand Stainless Steel
Due to the gentle nature of the wire, Round stranded
wires are traditionally used in early treatment to correct
misaligned teeth.
    STRANDS
Stranded wires apply a low force level over a given span
with minor to moderate deformation depending on the
severity of the malocclusion.
Rectangular stranded wires are typically used in
transitional applications to align and detail occlusions
effectively with comparatively lower force than solid
stainless steel archwires.

Available in Trueform I, Standard, and Lenght or spool

Coaxial, in Trueform I, Standard, or Lenghts or spool

Twisted, or Lenghts or spool

Woven, En arcade Trueform I, Standard
In : .0155, .0175, .0195, .0215, .016x.016, ..016x.022, .017x.025, .018x.025, .019x.025, .021x.025
En : .0155, .0175, .0195, .0215
In : .0155, .0175, .0195, .0215
In : .016x.016, ..016x.022, .017x.025, .018x.025, .019x.025, .021x.025
SIZE
TRUEFORM I
STANDARD
LENGHT
30" SPOOLS














FORM
.0155
.0175
.0195
.0215
.016X.016
.016X.022
.017X.025
.018X.025
.019X.025
.021X.025




















Pg 17
2.5°/ Australian wire spools or wire:
A.J. Wilcock® Australian Wire has earned its reputation as the finest stainless steel of its kind.
Strain aged processing ensures extraordinary resilience simply not found in any other
orthodontic wire product.
A.J. Wilcock® Australian Wire is imported exclusively to North America
through G&H® Wire Company.
These world-renowned stainless steel wire products offer superior
hardness and tensile strength for a multitude of applications where
exceptional resiliency is desired.
From .012 to .024, in Regular, Regular +, Special, Special +, Premium,
Premium + et Supreme
2.6°/ Australian Special Plus wire :
lingual or labial,
These unique, highly resilient Special Plus Grade stainless steel wires are
ideal for maintaining arch shape even when other auxiliaries and
elastics are being used. Combination wires are rectangular in the
anterior segment to maintain torque while the round posterior segments
allow sliding mechanics with reduced friction.
2.7°/ Lingual Arches
Pack of 2 arches in Niti .016
( S, M, L )
Niti Thermal .016, .017x.017, .017x.025
( S, M, L )
Lingual archwire available in Australian, or
St Steel ( .014, .016, .018, .016x.022 ) and
Beta3 ( .016, .016x.022, .0175x.0175)
Pg 18
2.8°/ Disposable archwire
marker
Red, 700-501 or White 700-502
700-500
2.9°/ Archwire dispenser
# 771-100
Display for posted archwire
Master Posted rack 48pcs # 120-002
+ cover # 120-012
# 120-005
Pg 19
2.2°/ ACCESSORIES
2.2.1°/ Bite-Bumper with jigs
- Open deep bite without trauma
Instructions : Put the placement-jig against the incisal edge,
Remove the jig, Bite-Bumper ready, # BB-00-01
2.2.2°/ Hook or stop to crimp or to screw
# 014-114
# 226-010
# 350-017/018
R /L
# 226-009
Stops to glide or to crimp, in pack or in bar, Hook to slide, Hook to crimp
- Stop to screw
# 350-013
SCORE : Crimpable Stops with Assembly, Diam Large or small
2.2.3°/ Hook for TAD
Pg 20
2.2.4°/ Spring for TAD
2.2.5°/ Coil Springs open/closed
- Available in stainless steel ( spool ) or Niti ( spool,
lenghts or short ).
- Choice of sizes and strengths
- To Close or to open.
Pg 21
Pg 22
2.2.6° / Spacer :
Spacer is an innovative modular system to activate nickeltitanium and stainless steel springs. Easy to use, it allows you the
ability to progressively activate springs without having to
remove the appliance saving chair time.
Spacers are made from Titanium Alloy and available in 5 sizes (1mm, 1.5mm, 2mm, 2.5mm, 3mm).
The auto closing system allows closure on the archwire without interfering with the biomechanical functions.
Spacer is available in assorted kits (Test and Intro kits) and in packs of 25 each.
Ref
Kit Intro ( 25 st )
# 555-301
Kit 100 + plier ( 100 st )
# 555-302
Refill of 25 pieces
# 555-303
2.2.7°/ The Expander and Rotator
- Nitanium Palatal Expander : size 26, 28, 30, 32, 34, 36, 38, 40, 42, 44 mm
Ref : # 502-xxx
- Nitanium Molar Rotator2 : size 26, 28, 30, 32, 34, 36, 38, 40, 42, 44 mm
Ref : # 504-xxx
- Transforce Arch developers -Transverse / Sagittal
- K-Loop Molar Distalizing Appliance
- CNA Reverse Curve Mesial Loop Palatal Bar :
size 28, 30, 32, 34, 36, 38, 40 mm
2.2.8 °/The Multi-Distalizing Arch (MDA)
Complete Distalizing Systems, a Fixed Appliance for Nonextraction cases
Kit # 424-150
In .016x.022 de 80, 83, 86, 89, 92, 95,
96, 101, 104 mm
Pg 23
2.2.9 °/ The Twin Force Bite Correctors
Correction of Classe II and III,
Two models : The Double Lock and Anchor wire and two sizes
Double Lock : from 23mm to 32 mm, Ref : # 424-215
from 27mm to 36 mm, Ref : # 424-216
Anchor wire :
from 27mm to 36 mm / from 32mm to 48 mm
2.2.10°/ Herbst appliance
from TP, Dentaurum,
Forestadent, Ormco
2.2.11°/ Palatal bars
Mesial or distal loop
2.2.12°/ Quad Helix
- 3 Sizes S / M / L
Size 1 # 004-31G / Size 2 # 004-32G / Size 3 # 004-33G
2.2.13°/ Lip Bumper
- Universal or with hook in 5 sizes
# 302-000
Pg 24
2.2.14°/ The distalizing molar from Lockar
The Lokar Molar distalizing
appliance :
Accurate, fast and efficient.
(10st) # 555-300
2.16°/ Distalizing spring
- Delivers continuous forces of 100 gr, distalize of 1 à 1.5mm/month.
- 3 / pack # 012-07045
Pg 25
SECTION III
3.1°/ Elastomeric Chain
Sticks , Mini Sticks, ...
Elastomerics, Ligatures & Retainers
Pg 27
3.1.2°/ Intra Elastics
Boxes of 30 packs of 100
With or without latex
Also available from Ortho technology,
Dentaurum, Gac, Glenroe, Ormco
Light 2 oz/57gm
1/8 inch (3.22mm )
Medium 4 oz/114gm
Heavy 6 oz/ 170gm
463-101
Golf
463-104
Tennis
Extra-Heavy 8 oz/227g
3/16 inch (4.6mm )
463-200
Diving
463-102
Football
463-204
Track
463-205
Bowling
1/4 inch (6.4mm )
463-300
Sailing
463-103
Basketball
463-304
Fishing
463-305
Volleyball
5/16 inch (7.9mm )
463-400
Hockey
463-104
Skating
463-404
Archery
463-405
Motorcycling
3/8 inch (9.5mm )
463-500
Baseball
463-105
Rodeo
463-504
Mtn.
Climb.
463-505
Waterskiing
3.1.3°/ Lip Bumper Tubing
Clear : small, ref : # 460-205 /
medium, ref : # 460-206
or grey ( small, ref : # 460-201 / medium,
ref : # 460-202 )
3.1.4°/ Elastomeric thread
.025 grey Ref : # 460-101
.030 grey Ref : # 460-102
.025 clear Ref : # 460-105
.030 clear Ref : # 460-106
.025 Ref : # 460-301
.030 Ref : # 460-302
Pg 28
3.1.5°/ Separators and rotation wedges
Rodiopaque separators
( pack of 100, Ref : 353-1000 )
or in elast o loop
metallic separators
Elast O Loop # 466-424
Rotation Wedges in clear or grey
# 280-003, clear
# 280-004 grey
Elastic key ring storage Neon ( 50 pcs )
# 345-001
Pg 29
3.2.1°/ Stainless Steel Preformed Ligature Ties
SOFTER AND SMALL THAN THE ORTHO TECHNOLOGY
Shorty , Pack of 500, in .010, .012, ...
Ref : # 270-016, 017
Kobayashi Technology, pack of 100 in .012, .014
Ref : # 270-007, 006
2.2°/ Toothcoated :
for the long by 100 in .012
Ref : # 270-018
"WHITER" THAN ORTHO TECHNOLOGY
Normal shorty by 500 in
Kobayashy shorty (100)
.012
.014
Ref : # 270-026
Ref : # 270-009
3.3°/ Lingual Retainer
3.3.1°/ Titanium Trauma Slint
IDEAL METHOD FOR SPLINTING OF TRAUMATIZED TEETH.
- Indication : Stabilization of teeth after repositionning or replantation in
original position
- TTS advantage for the dentist : User friendly handling, Easy adaptation
and fixation, Manual shaping of the splint. Time reduction in simple splint
application and removal, Optimized splint design
- TTS advantages for the patient : Improved comfort: minimal impairment of speaking, eating and oral hygiene
in comparison with conventional splints
Case 1 : (Dr Michael Bornstein )
This 15-year-old patient was adlitted
following a road accident. Avulsion of 1/1
(21,11) showed an enamel-dentine fracture
without involvement of the pulp. /1 (21)
was replanted and stabilized for 10 days by
means of the TTS
TTS-1002, : 52 mm x 0.2 mm
TTS-1004, : 100 mm x 0.2 mm
Case 2 : (Dr Yves Germanier )
Complex tooth trauma in a 13-year-old girl
after a fall while climbing. Avulsion of /1
(21), root fracture of 1/ (11) in the cervical
third of the root
( crown fragment could not be found
anymore) and 2/ (12) with a fracture of
the crown without involvement of the
pulp. /1 (21) was replanted and fixated for
the two weeks using the TTS
Pg 30
3.3.2°/ Lingual Retainer from Reliance :
Permanent retention is greatly enhanced using a flattened,
dead soft, 8 braided wire. Intra-arch splitting with this thin
ribbon arch prevents torque control problems that can
occur using a round braided wire for these procedures.
When bonded on the lingual of the upper incisors, a very
thin rectangular wire can be adapted with little lower incisor
interference. The dead soft wire is easy to adapt and
prevents inadvertent tooth movement associated with
active force wires.
Bond•a•Braid™ is excellent for semi-permanent orthodontic splinting of the upper or lower incisors.. It can be used to hold diastemas
closed, maintain difficult extraction sites and solving various other tooth-splinting dilemmas. Excellent for splinting periodontal comprised
teeth.
Ortho-Flextech :
Using Solid Gold Chain Retainer ( Stabilizes orthodontic corrections, Prevents
rotational relapses, Easy application - Low failure rate due to "flex linkage", Improved
patient comfort - lays flat against the teeth, Lasting esthetics due to 14 karat white
gold composition
Ortho-Flextech Stainless Steel :
# 606-010
Splintax
Permanent Retention made Easy!
• The first bonded lingual retainer wire that does
not fray when cut.
• Made from a flattened coaxial wire to a precise dimension of .20 mm x .75 mm that lays
nearly on the lingual surface of the teeth for precise bonding and retention.
• Will prevent shifting of the teeth from forces applied by the tongue, cheeks, or chewing.
• Works well with all types of adhesive and is easily formed to fit the tooth surface.
• Economical in spooled pack for just the right size each time - which reduces waste.
• Suitable for Maxillary and Mandibular arches.
SPLINTAX™ 5.6 Ft (1.7 mt) spool 550-100
Pg 31
Lingual Retainers from TP
Perio Bond A Bar
# 224-226
Available also :
5/5, 3/5, 3/3
Lateral to Lateral
- 6 sizes
Lingual Bond a Splint
Upper Central to
Central

10 sizes, piece or by kit of 10
# 224-560 F
Twisted wire
Available in : .0155, .0175, .0195, .0215
3.3.3°/ Everstick Ortho
everStick®ORTHO for aesthetic retention
everStickORTHO is indicated for the aesthetic retention phase after active orthodontic
treatment. It is a reinforcement material made of glass fibres and polymer/ resin gel matrix.
This matrix holds the individual glass fibres in bundle which facilitates easy handling of the
fibre bundle. The fibre bundle is easy to bond tightly to teeth.
Clinical advantages: aesthetic – blends with the natural tooth shade, quick application – no
need to pre-bend before placement , easy to adapt directly to the teeth – no study models
nor second visit needed, completely metal free (comfortable to wear and suits for metal
allergic (Ni, Cr) patient), reliable composite adhesive bonding, patient friendly: easy to clean,
natural feeling
Properties:
Diameter: ~ 0.75 mm
Amount of fibres: ~1600
Shelf life unopened/ opened: 2 years/ 6
months
Package sizes:
product number 100016, incl. 2 x 12 cm
product number 100018, incl. 1 x 8 cm
Kit # 020-120; piece # 020-121
Pg 32
SECTION IV
Bonding , cement & retractors
4.1/ Bonding from Reliance
Rely a Bond :
Light Bond :
Rely•a•Bond® Primer is formulated with a monomer that contains
fluoride and will not reduce bond strength.
Rely•a•Bond® is formulated with a highly filled paste that
combines with a unique primer to produce a bond strength to
etched enamel that virtually eliminates bonding failures.
Paste is very tacky, which prevents bracket flotation and
penetrates the finest mesh bases, extended Shelf Life and
Economical
Light Bond™ Paste and Sealant are formulated with a patented
monomer that contains fluoride. The Light Bond™ Paste is a
highly filled material that delivers maximum bond strength in all
situations with all types of appliances; the paste is very tacky
which prevents bracket flotation. If a thinner paste viscosity is
desired for bonding lingual retainers and acrylic appliances, Light
Bond™ Thin or Medium Paste is available.
Light Bond™ is comprised of a catalyst and filler that reflects
the light to insure complete polymerization under any appliance:
metal, ceramic, sapphire or plastic. Once the material has been
properly cured, an arch wire can be placed immediately.
Light Bond™ is a small particle glass filled material designed
specifically for orthodontic use that allows maximum
penetration of filler into the finest screen mesh base and
removal without enamel scarring.
Phase II, chemical cure adhesive
Pad Lock :
Bonds Chemically to Metal - Pad Lock® was developed to
increase adhesion to even the finest screen mesh bases. The
paste contains a monomer that bonds chemically as well as
mechanically to metal bracket bases improving adhesion.
Pad Lock® Paste will fluoresce when illuminated with
any ultraviolet black light. This feature allows the operation to
disclose flash not removed at the time of bracket placement
and adhesive remnants left at debonding.
- Single Paste, Light Activated - Compatible With All Sealants and
Self-Etching Primers - Available With or Without Fluoride Suggested Uses - Bracket adhesive.
Quick Cure:
Reduced Curing Time - Quick Cure™ is a new generation of
light cure paste with additional catalyst for a faster and more
complete cure with any curing light.
Quick Cure™ can be used with any light cure sealant and is
available in kit form with Light Bond™ Sealant, PRO SEAL® or
Assure® Universal Bonding Resin for an additional charge.
Quick Cure™ Paste is formulated with a patented monomer
which releases fluoride. • Suggested Uses - Bracket adhesive.
Pg 33
Assure
Hydrophilic - Assure® Paste is a light cure paste that will bond
to slightly contaminated enamel. Assure® Paste is the ideal
viscosity to prevent bracket flotation and contains fluoride.
Assure® Universal Bonding Resin will bond to any enamel type,
wet or dry, normal or atypical, including deciduous, bleached
and dentin. In addition, Assure® will bond to composite and
metal surfaces without any additional primer.
• No Light Curing Required - Can be used under any chemical,
light or dual cure adhesive, regardless of manufacturer.
• Suggested Uses - Bracket adhesive, Wet field bonding.
Hydrophilic Light Cure Orthodontic Adhesive Contains Fluoride
L.E.D. PRO SEAL® or PRO SEAL®
Light Cure Fluorescing Filled Sealant Contains Fluoride
PRO SEAL® and L.E.D. PRO SEAL® are the first sealants that will
completely set without an oxygen inhibited layer. This creates a
smooth hard surface that protects the enamel.
They are highly filled, no mix light cure sealants that resist
toothbrush abrasion and also contain a UV fluorescing agent
for easy monitoring of sealant coverage.
They can be used under any light cure, chemical cure or dual
cure paste system. U.C.S.F. and M.C.G. tests prove the long term
benefits of this enamel protective sealant.
L.C.R.™ Light Cured
The traditional self cure bonding agent does not totally polymerize
due to oxygen inhibition. Consequently, it is rinsed away at the
conclusion of the appliance bonding procedure leaving exposed
etched enamel unprotected.
• Maximum Cure® Sealant will set in a thin layer. A unique catalyst
system prevents oxygen interference during polymerization.
The whole labial or lingual tooth surface can be sealed.
They are formulated with a patented fluoride monomer.
• Also available: Maximum Cure® Filled Sealant for longer
lasting protection.
• CHEMICAL CURE SYSTEM - NO CURING LIGHT REQUIRED:
Longevity and Durability - L.C.R.™ Light Cured Bonding Paste
is a hybrid composite that cures to a smooth glass finish for
patient comfort and reduced wear. This highly filled light cured
resin paste is an excellent choice when longevity and durability
are required. Simply apply according to instructions and
light cure.
Pg 34
Flow Tain™ and Flow Tain™ L.V.
Light Cure Flowable Microfil Composite
Suggested Uses : Lingual retainer adhesive, Attachments on
thermoplastic tooth aligning products, Splinting material (e.g.
fibers), Indirect bonding adhesive, Arch wire stops
These materials are very smooth when cured which will reduce
wear and enhance patient comfort.
When cured, he has a low modulus of elasticity and are not as
brittle as conventional composites, they are flowable materials,
their thixotropic properties prevent them from slumping for
better control.
Ultra Band Lock
Single Paste System - No wasteful mixing
Light Activated, No Mixing, All Purpose Cement - Ultra BandLok® can also be used to bond large acrylic appliances and as an
occlusal build-up material. When bonding the appliances you
must first etch the enamel surface.
He will bond chemically to stainless steel bands. Removal is all
in one piece with cement in the appliance
Available in Natural or Blue Shade
Assure® Universal Bonding Resin
Assure® Universal Bonding Resin will increase adhesion to normal,
atypical, dry or slightly contaminated enamel. This universal
bonding agent bonds to metal restorations without additional
primers. No drying or light curing required and can be used with
any light or chemical cure system.
He will bond to the following surfaces without additional primers:
fluorosed, deciduous, bleached or wet enamel, dentin, metal
surfaces and composite restorations. He is Enhance™ Adhesion
Booster and bonding resin in one step!
O.V.S.™ Orthodontic Veneer System
An Excellent Solution to a Unique Problem! - O.V.S.™ has
been perfected and used by Dr. James Hilgers and Dr. Debra
Cook in their own practice. A common problem when treating
orthodontic cases is the need to bond an attachment to a peg
lateral or an undersized tooth. With O.V.S.™ that problem has
been solved! O.V.S.™ will provide a complete in-office system
that creates an aesthetic and properly sized temporary veneer
surface to bond your attachment. This saves you and your
patients both time and money by eliminating the need for a full
temporary crown.
Pg 35
Cement
Ketak Cem, Aqua Cem and Fuji
Fuji 1, # 294-790,
Ortho LC, # 296-000
# 294-825
4.2°/ Accessories
Microbrushes
The perfect solution applicator. Provides precise placement of
solution. Reduces use of excess material. Flexible tips bend to
any angle. Non-linting and non-absorbant. Four distinct colors
for application identification.
Assortiment # LD 600-508
Dri angle
Silver, 2 sizes
Neo Dry
Small or large
4.3°/ Retractors :
4.3.1°/ Retractors
Gestenco Soft
The Nola
Soft, resist, Autoclavable, Ref # 008-034
2 sizes , small # ib 0250s / large # ib 0250L
Gestenco Evacue, With ring, soft, resist,
Autoclavable, ref # 008-035
Pg 36
Kerr Optiview :
Saga with wings
Small # 44 55 02 or standard # 44 55 00
3 sizes : Small / Medium / Large colored
simple retractor
Double ended retractor
2 sizes, small # 601-150 or standard # 601-151
- 2 sizes : Pedo or Large
Spand Ezz Cheek Exp :
Access-cheeck 2 sizes, child / adult
Disposable Tongue Blocks, Normal, Super
Soft,
3 sizes (small, med, large) / 10, + Saliva Ejector System
Tlc retractor-tongue, lips & cheek
Re-Useable Mouth Props :
Pg 37
4.3.2°/ DRYFIELD SYSTEM
Size Child or Adult
Available in autoclavable or disposable models.
Three (3) to choose from: pedo, adult and NEW medium (adapter clip) Insert with the opening
facing the palate. Seat the tongue shield into
the lower arch and upright so that the rounded top portion engages
the palate. When placed in the mouth, the palate rests on the top of
the tongue shield to hold it in place.
The lower portion contains the suction tube, which rests comfortably
in the interior of the mandibular arch and cushions the tissue to
eliminate irritation. The precisely positioned apertures provide
effective control of saliva. Simply instruct the patient to close lightly
to hold the device in place. This comfortably and effectively props the mouth open while preventing the tongue from contacting any tooth
surface. The design also enhances visibility for easier access to second molars. * For best results, we recommend the use of the AccessCheek™ Retractor in conjunction with the Quest™ Dry Field System. This provides complete isolation and full visibility for superior bonding
results.
SECTION V
Facebows, Headgears & Appliances
5.1°/ Face Bows and Headgears
Facebows and bags for facebows
Interlandi
High pull Jean 2 hooks
Delaire
standard (
red ) or
long face
( white )
High pull + j Hooks
Neck pad
Pg 38
5.2°/ Myofunctional appliance
5.2.1°/ Infant Trainers
Primary dentition
The Infant Trainer™ is an active exerciser that encourages
patients to chew correctly while using the jaw muscles. The
Infant Trainer™ helps patients breathe through their nose
and it also trains them to swallow and position their tongue
correctly.
5.2.2°/ Trainers T4K
Early mixed dentition
The Pre-Orthodontic Trainer for Kids™ (T4K®) has become one of the
most popular and successful products available from MRC. The T4K® is
most effective in early mixed dentition for tooth eruption guidance
and correction of myofunctional habits.
T4K® Phase 2 - Correcting Tooth Alignment
Once the dental alignment improves, the harder T4K® Phase 2 (pink or red) is used. This is much stiffer (same principle
as orthodontic archwire). As the teeth come into place, more force can be used to encourage their alignment. The
myofunctional characteristics are the same as the T4K® Phase 1. Use the finishing T4K® Phase 2 for a further 6 to 12
months. Use beyond this period is recommended depending on the outcome and the next phase of orthodontic
treatment.
Patient Selection
The optimum patient age for the T4K® is 6 - 8 years of age. Although it is possible to use the T4K® in patients ranging
from the primary right through to the permanent dentition, as dentition progresses the effectiveness of the T4K® as
the sole method of treatment is lessened.
Pg 39
5.2.3°/ Trainers T4A for adults
T4A™ Phase 1 (Starting)
T4A™ Phase 2 (Finishing)
Patient Selection : The T4A™ is best suited to patients 12 - 15+ years of
age in the early stages of the permanent dentition.
The T4A™ is like the T4K® but designed for the permanent dentition. It
has higher sides in the canine region to align erupting canines and the
distal ends are longer to accommodate the second molars.
The combination of labial bows and tooth channels with the 2 phase hardness, polyurethane material, give good
alignment of anterior teeth. The Myofunctional Effect™ also retrains oral musculature making it ideal in retention and
minor relapse cases. The T4A™ is made of polyurethane and is available in two versions - Phase 1 (softer version) and
Phase 2 (harder version).
5.2.4°/ T4B for braces
The Trainer for Braces™ (T4B™) is intended for routine use with newly banded cases. The T4B™ is highly flexible,
providing optimum patient comfort with minimum appliance thickness. It prevents soft tissue trauma from braces,
retrains the oral musculature (the MyofunctionalEffect™), and treats temporo-mandibular joint (TMJ) disorder.
Patient Selection
The T4B™ is perfectly suited to newly banded patients who are feeling discomfort in the tongue, cheeks and lips.
5.2.5°/ T4C II
Myobrace T4
The T4 provides final alignment of the teeth and jaws. The T4’s firm
polyurethane construction also provides excellent retention. The
hollow tongue tag encourages final tongue position. The T4 is
available in regular and large.
MRC has pioneered the use of appliances to correct myofunctional
habits in growing children and has proven success in orthodontic
Pg 40
5.2.6°/ Interceptives
The Myobrace interceptive Class III™ is a three-stage appliance system designed specifically to correct poor oral
habits while limiting the excessive lower jaw development problems commonly associated with patients who have
class III malocclusion.
The Myobrace Interceptive Class III™ is most effective before a child’s permanent teeth are coming through (ages 5
to 8) and is available in three sizes.
5.2.7°/ Myobraces
The Myobrace System™ incorporates many of the Trainer System™'s well recognized myofunctional training
characteristics, but features MRC's patented dual-layer technology for improved arch development and tooth
alignment. The inner core (Dynamicore™) produces arch development, while the soft outer core builds and
improves on the characteristics of the Trainer System™. This dual-mould design allows for better patient compliance
while still providing actively functioning orthodontics.
Variations of the Myobrace® are available for a variety of patients age groups and treatment needs - giving
practitioners greater treatment options for a wider variety of patients.
5.2.8°/ T4F Trainers 4 Finishing
# 893-612
Pg 41
5.2.9°/ TMJ Appliance or EZ Splint Day or Night
TMJ Solutions
# 893-630
Day # 895-001 / Night 895-002
5.3 °/ Oral Screen :
Soft or hard
Two sizes
Size 1: orange ring 3-5 year
Size 2: blue ring 5-8 year
5.4°/ END OF TREATMENT
5.4.1°/ ORTHO-TAIN :
The Ortho-Tain® Postioner™ Perfects & Maintains Corrections
Ortho-Tain® Preformed Positioners™ provide retention and corrections in orthodontic cases. They are used for
finishing orthodontic cases or after orthodontic treatment. The Ortho-Tain® Positioner™ maintains overbite and
overjet correction at the same time, while maintaining tooth alignment and perfect Class I Intercuspation.
The Ortho-Tain® Positioner™ can shorten active treatment by 2 and 6 months, while correcting up to 3 mm of overjet,
molar relations, coordinate the arches and intercuspate the teeth. Save time with the Ortho-Tain® Positioner™
because it requires no lab work, impressions or adjustments. Only one measurement is needed to fit your patient for
an Ortho-Tain® Positioner™.
Other benefits include: Designed for both non-extraction ("N" Series) and extraction ("X" and "U" Series) cases. - Built-in
Cooperation Detector® allows you to ensure compliance with recommended wear time, by visibly seeing a change in the color of
the appliance.
Increased gingival ridges to improve torque retention. - Available with breathing holes as well as varying degrees of softness.
Immediate retention – inserts into the mouth instantly. - Made of durable and resilient material - resists permanent deformation.
Saves one hour of work per case- no impressions, no lab work, no adjustments. - Thirty-three graduated sizes fit 95% of extraction
and non-extraction cases. - Transparent- can see pressure areas and check fit easily. - Interproximals absent between upper
incisors to adjust for varying sizes of lateral and central incisors and enhance space closure. - Interproximals eliminated to
extraction sites to enhance closure. - If patient suffers from a bruxism, these appliances prevent further wear of the teeth.
Pg 42
The Ortho-Tain® Positioner™ is ideal for finishing up orthodontic cases, especially when the patient is anxious to get bands or brackets
removed. Suggested wear of the Ortho-Tain® Positioner™ is 4 hours per day and night for the first month, 3 hours per day and night for
second month, 2 hours per day and night for third month, and 1 hour per day and night for fourth month.
After the fourth month only nighttime wear is required to maintain correction. If patient has experienced relapse due to non-use the
Ortho-Tain® Positioner™ can be worn 2-4 hours a day to bring the case back to a perfect Class I occlusion in minimum time.
5.4.2°/ OCCLUS-O-GUIDE :
The Occlus-o-Guide® : 8 to 12-Year-Old Patients Treated in Four to Ten Months
The Occlus-o-Guide® treatment offers the 8 to 12 year old patients an orthodontic appliance to straighten crowding,
spacing, overbite, overjet, and guide erupting posterior teeth into a perfect Class I relationship. Plus, it is designed to
correct jaw discrepancies, molar relations and rotations. Active treatment consists of two to four hours per day plus
nighttime wear for a period of four to ten months.
Results include approximately 1mm of correction per month; more at the beginning of treatment, less at the end.
Active wear/exercise consists of biting down into the appliance and holding for one minute, then release for 30
seconds. Exercising consists of a minimum of 20-minute increments throughout the day totaling a total of two to four
hours. The “G” series is available in 13 sizes. Use these simple measuring instructions to determine which size best fits
your patient.
Treatment Plan
The Occlus-o-Guide® can be used: In most non-extraction malocclusion cases whose permanent canines and bicuspids are
beginning to erupt. - Correct up to 4mm of crowding and spacing. - To correct a vertical overbite problem of any severity. - To
correct a horizontal overjet problem of any severity. - To correct a posterior cross-bite in the bicuspid area. - To correct maxillary
and mandibular incisal rotations. - To level severe curves of Spee. - Can be used in combination with fixed appliances. - To correct
severe labio-lingually positioned maxillary and mandibular incisors. - To correct minor malocclusions in 8 - 12-year-olds. - Can be
used to correct most TMJ problems where an excessive overbite and overjet exists. - Built-in Cooperation Detector® allows you to
ensure compliance with recommended wear time, by visibly seeing a change in the color of the appliance. - If patient suffers from a
bruxism, these appliances prevent further wear of the teeth. - Appliance can also double as a mouth-guard during athletic activities.
Occlus-o-Guide® allows your business practice to:
Treat the mixed dentition case in one hour of total chair time.
The unique design and features of Occlus-o-Guide® appliances allows for Class I orthodontic corrections. Unlike other “one size fits
all” appliances, Occlus-o-Guide® intercuspates the teeth, corrects overbite, and corrects into a Class I occlusion.
Use only one appliance during active and retention periods, relinquishing the responsibility and the concern of more appliances
arriving in the mail or being refabricated due to additional dental work.
Use one appliance allows erupting teeth to be guided into a perfect Class I occlusion.
Not require a new Occlus-o-Guide® appliance for any dental work done during treatment .
Ortho-T® patient fees range from 1/3 to ½ the cost of braces in your area. Significantly cheaper than other removable appliances.
Correct all dimensions at the same time with Ortho-T® - crowding, spacing, overbite, and overjet.
Relieve pain associated with TMJ conditions.
Require no lab work.
Only models & panorex are required for diagnosis
Require a patient release form, suggested is the current AAO version.
Utilize our diagnostic service. Orthodontists on staff at Ortho-Tain® will diagnose your cases and provide complete treatment plans
for a minimal charge.
Pg 43
5.4.3°/ FINITION or FINITION R:
It comes to no surprise that Signature is the most popular
orthodontic preformed finishing appliance on the market
place. For 25 years it constantly evolved according to new
scientific and materials related data. Designed by and for
orthodontists, Signature features all the proper
characteristics to meet and exceed the highest standards of
your daily practice:
• Ideal model of arch form
• Class I relationship
• Ideal elasticity for patient comfort
• Maintains occlusion after debanding
• Vertical seating after debanding
• Biocompatible medical grade soft plastic
• High inocuity - non allergic
• Does not release by-product like phthalates
• Transparent
• Available in 45 sizes
• 3 series: without extractions, with 2 bicuspid extractions
and 4 bicuspid extractions
Ideal elasticity for patient comfort
• Maintains occlusion after debanding
• Vertical seating after debanding
• Biocompatible medical grade soft
plastic
Indications:
• Post treatment dynamic retention,
• Vertical seating after debanding,
• Temporary retention,
• Correction of micro rotations,
• Prevention of relapse,
• Temporary retention between step 1 & 2,
• Maintains alignment,
• Corrects interproximal spacing,
• Improves interdigitation of teeth.
5.4.4°/ SLEEPRIGHT®
• EZ-Splint (Day-Time) LD-POW
• EZ-Splint PM (Night-Time) LD-SLEEP
SLEEPRIGHT® - Adjustable Night Guard used for treating bruxism, TMJ disorder and headaches.
Protects teeth and dental work from teeth grinding and clenching. No boiling water or
melting plastic is required to fit. Self-adjust technology fits all sizes. Free of BPA and Latex.
5.4.5°/ Pre-finisher from TP
Pg 44
SECTION VI
Equipment and Laboratory
6.1°/ EQUIPMENTS
6.1.1°/ Signature box by Hu Friedy
SIGNATURE : AVOID WASTING TIME !
Efficient,
Organized
Time saving
Standardizes material set-up for every type of procedure : Increases efficiency of materials management,
Eliminates time-consuming tray preparation for every procedure, Tubs may be configured to meet your
office needs or are available as a complete tub.
Procedure tub colors match Hu-Friedy IMS cassette rail colors
Increases office organization and workflow efficiency, Allows for quick identification of consumable
products
Provides esthetic integration with IMS cassettes
Locking covers : Protects items from airborne materials during transportation and storage and adheres to
infection control standards
Microban® antimicrobial product protection : inhibits the growth of microorganisms that can cause stains,
odors and product degradation and is registered with the EPA for these applications
Allows for storage in central sterilization or each operatory : Tubs can be transported to the operatory prior
to each procedure, eliminating inventory management of materials in each operatory
…8 colors
Pg 45
6.1.2°/ Luxite
from Itena
- Maxi Power 1600mW/cm²
- Choice of 3 light probes
- 6 curing modes:
Turbo from 1600mW/cm² in 5, 10
ou 20 secondes
Or a pulse mode from
1600mW/cm² by cycle of
0,1 sec light
A soft start mode , increasing of
power from 0 to 650 mW/cm²
during 5 sec after, maximum
power during 15 sec.
LED Pen Light
( Spectre of 450-490 nm )
protection UV:
Emergency light
Uvex Skyper #
355-534
6.1.3°/ Lightboxes
Ultrathin, lightweight, wearable
Office Light boxes
2.5 cm thikness , dim : 37x27.5x2.5 cm,
sceen size : 30x20 cm
Pg 46
6.1.4°/ Binocular Loupe from Heine
HEINE® HR-C 2.5X HIGH RESOLUTION BINOCULAR LOUPES
with rigid loupe mount
HR-C 2.5x Optics: Multi-Coated optics for crisp, bright images / Supercompact lightweight (17g). / Water-resistant. / Independent adjustment of
left and right optics for perfect PD adjustment.
Mounting Option: HEINE S-FRAME
Maximum comfort with a modern, ergonomic
design.
Malleable temples and nosepad can be customized to fit any face perfectly.
Innovative materials – Carbon-Kinetium reduces weight (24g).
Tough polycarbonate protective lenses.
Optional clip-in correction frame for prescription lenses.
6.1.5°/ Mirror Handle
Pg 47
6.1.5°/ Autoclaves : G4 series and Bravo class B from Scican
The new generation STATIM®,
The G4 Series.
The gentleness you know,
a level of interactivity never seen
before.
IMMEDIATE STEAM GENERATION
Unlike conventional autoclaves that need to heat an entire
reservoir of water, STATIM uses only a small, specific amount of
water required for each cycle. Water is introduced into a heating
device referred to as a ‘steam generator’, rapidly heated and
converted to steam in mere seconds.
AIR REMOVAL
Using PPPD technology and our patented steam injection STATIM
process – air is automatically forced out of the STATIM sterilization
chamber.
CASSETTE SYSTEM
The thin stainless steel walls of STATIM’s fully-removable cassette,
(or sterilization chamber) allow for rapid heating and cooling of the
chamber. As a result, STATIM meets the conditions for sterilization
and drying in a fraction of the time required by a conventional
autoclave.
CONNECT
There’s nothing like the STATIM networked portal. In addition to
viewing your STATIM’s current operations, you can also access cycle
history, printing and validation information and sterilization records.
If there is ever a cycle fault, the
STATIM G4 can send email directly to your office and also to your
dealer to let qualified technicians know that servicing is required.
DRYING TECHNOLOGY
The STATIM 2000 G4 and 5000 G4 have each been designed to
provide you with a complete solution: rapid
sterilization balanced by rapid drying. Introducing
STATIM Dri-Tec drying technology.
DRI-TECC – CONVECTION HEAT DRYING TECHNOLOGY
The STATIM 2000 G4 uses convection heat to dry
instruments by utilizing the remaining heat in the system
after the sterilization phase. Heat is captured and
released into the cassette, drying wrapped instrument
loads in as little as 10 minutes.
DRI-TECR – RADIANT HEAT DRYING TECHNOLOGY
The STATIM 5000 G4 uses heat generated by the sterilization cycle
which is ‘absorbed’ by unique drying plates located in the
sterilization chamber. Heat is transferred from the drying plates
directly to instruments resulting in accelerated, full load drying in
as little as 15 minutes.
BRAVO - VACUUM CHAMBER AUTOCLAVES
Bravo Benefits :
Fast cycle times, Fractionated vacuum system, Closed door drying with
Dri-TecV technology, Single use Pull’n Push water system, Easy to use –
single button operation, Conforms to international and national standards
(ie. CDC, ST, ISO,EN, BS) [Class B], Integrated printer option, Patented door
locking mechanism and steam generation system, 17 or 21L chamber
capacity
Pg 48
V
DRI-TEC - VACUUM DRYING TECHNOLOGY
The SciCan Dri-TecV drying system provides a perfectly dry load every time. In addition,
Bravo’s large capacity allows the office to quickly process three wrapped full-size cassettes or
up to fifteen pouches. Unlike many other simple chamber autoclaves, the Bravo uses only
fresh distilled water for every cycle. The unit has been designed for the option to pull clean
distilled water from a container as far as six feet away and then push the used water directly
to the drain, freeing up valuable time for your staff. The Bravo comes in three models to suit
the most far ranging requirements. The table below outlines the difference between the units
and differences in loads and cycles times.
The EVB and EVS are pre & post vacuum sterilizers built for dental
and private clinics that wish to upgrade to an autoclave that uses
vacuum air-removal. The EVB and EVS are the classic and reliable
choice, offering advanced technology at an affordable price.
The EVB is designed to provide Class B cycles while the EVS is
designed to provide Class S cycles in accordance with EN13060.
Both models have the following features:
Features :
A pre-vacuum air removal stage
A post-sterilization drying phase, based on the combined operation of heat and
vacuum with air inlet pulses
The EVS is an affordable solution that is designed to process wrapped and
unwrapped, hollow B instruments.
If, however, you need to sterilize hollow A devices, with extremely long
lumens, you should consider the EVB. The EVB is programmed to perform up to
4 pre-vacuum air removal pulses that result in 99.5% removal of air.
The EVS, on the other hand, uses a single air removal vacuum pulse to remove
most of the air.
- Stand-by heating mode keeps the EVB warm and ready
to use
- 316L type stainless steel chamber and door with
electro-polish finish
- Control lock-out switch prevents starting a cycle if door
is not properly locked
- Door protection device prevents door from opening at
high pressure and temperature
- Automatic safety shutoff prevents overheating of
chamber
Pg 49
Millennium B, with its 17 litres load capacity, comes equipped with a
patented instant steam generator which gives high quality saturated
steam. The hydraulic circuit, in combination with the vacuum pump,
allows extremely short fast cycles and remarkable water saving.
More, faster cycles
Thanks to the steam generator and the top-performance dual
headed vacuum pump, type B cycles for hollow and porous products
can be completed within less than 30 minutes.
Mocom autoclaves can perform 11 different cycles all without
down-time between cycles, saving a considerable amount of time
and energy. The number of vacuum pulses and the duration of the
drying phase vary according to the material to be sterilised.
Moreover, on completion of the cycle, the autoclave goes into
stand-by mode - automatic shutdown function also available.
Automatic water filling and draining function
Thanks to the auxiliary water pump and the optional
demineralization system, the autoclave can control the water filling
and draining function automatically.
Process Evaluation System
The advanced self -evaluation system of the sterilisation process
(referred to as ‘Process Evaluation System’ according to EN 13060)
ensures accurate cross control of key parameters (temperature,
pressure and time) and immediate indication of any failures during
the sterilisation cycle.
Programmed maintenance
The self-test system will indicate if any servicing (e.g.: replacing the
filter) is needed. Thus, you will be able to work under the safest
conditions, confident in your efficient and controlled autoclave.
Your software always updated
Software updates via the integrated USB port will be fast and easy,
for the maximum efficiency of your autoclave.
Our guarantee, your safety
The high quality of the materials used and validated production
standards allow Mocom to guarantee your autoclave for 2500
cycles or 24 months.
DDS7000 DRY HEAT STERILIZER from
Dentronix
The DDS 7000 Dry Heat Sterilizer cools instruments
inside the unit for your safety.
• Kills spores and all living organisms
• Operating temperature of 375° (190°C) for 3 minutes
• Eliminates water damage to instruments
• Dry process keeps instruments sharp longer
• Exterior of the unit is always safe to touch
• Includes plier racks for the sterilization process
• Provides an easy transfer system from sterilizer to chair side
• FDA 510(k) cleared K051660
• Cool down cycle allows immediate handling of instruments when the
sterilization cycle is complete
• New HEPA filter system provides purified air during cool down
• New internal diagnostic system monitors and reports all sterilization processes
• New light emitting diode (LED) display informs operator of current operating conditions
• Designed and developed in accordance with ANSI/AAMI ST50:2004 standards
Pg 50
6.1.6°/ IMS ORTHODONTIC CASSETTES
Use IMS cassettes to hold
instruments and accessories in
place throughout the entire
Instrument Management Cycle.
Once a chair side procedure is
finished, contaminated instruments
never need to be touched again.
Cassette DIN for 16 or 18 instruments
6.1.7°/ Elma clean box & Glass Bead Heater
Elmasonic One, Ultrasonic cleaning unit
Professional ultrasonic cleaning in beautiful design.
Perfectly suitable for cleaning tasks in the shop, practice and for the DIY.
Powerful performance through sandwich transducer system. Easy operation
with LED display for timer and permanent operation.
Practicable: The transparent cover can be taken off and used as basket base
(dripping off). Cover and basket are included.
To make Elmasonic match with the high standard shop fittings, we have put
special emphasis on pleasing design during development. The attractive plasic
housing increases rapid service competence for each application and is especially suitable for cleaning tasks to be carried out in the presence of the
customer. Another asset is the automatic voltage adaptation from 90 to 250
VAC which has been specially designed for international markets.
The cover design, where the cover is folded upwards after cleaning and the condensation water is collected in a small groove in the cover
and will be redirected into the cleaning tub, serves as an example how practical and useful Elmasonic can be when working in your shop,
practice, or workshop.
Due to its performance capacity, the sandwich transducer even removes heavy substances. Settlements in the sterilisation apparatus will be
avoided. Hygiene starts with cleaning. No scratching of surfaces; cleaning where liquid can permeate, even in joints and splits. Well suited
for watches and jewellery, laboratory, optical and dental equipment, pedicure, manicure, cosmetics, numismatists, tattoos and minerals, for
the cleaning of microscopic slides, cuvettes or for the degasification of samples.
Pg 51
Elma Clean Box
Ultrasonic Cleaning Unit
A good way to start professional
ultrasonic cleaning.
Product features:
Suitable for the cleaning of jewellery,
spectacles, prosthesis and instruments
The cleaning beakers allow the hygienic
cleaning of different cleaning items at the
same time. (e.g. prosthesis, drills, utters)
In addition, it is possible to use a different
cleaning media in each of the beakers
Easy and comfortable to operate - Pre-programmed cleaning time - Good visible LED-display - Practicable: the translucent lid can also be
used as basket holder (drip drying) - Delivery includes/inclusive of: Ultrasonic cleaning unit, cleaning basket, lid, two cleaning beakers,
pincette, wall bracket
Glass Bead Heater
No substitute for autoclave, but perfect for quick sterilization of
instruments just before use (endo-instruments, etc.)
Ideal for pre-warming injections and for making mirrors anti-fog.
Special heating element and precision thermostat keep inside
temperature constant: heat beads to 230 °C (450 °F). The
outside of unit remains cool, Removable chamber for easy
cleaning
In two sizes:
- Maxi 19 x 13 x 14 cm Inner container Ø 5 cm
- Mini 16,5 x 11,5 x 11,5 cm Inner container Ø 3,5 cm
# 452-300
6.1.8°/ Boby & Pedestals :
# 452-303
Pg 52
6.1.9°/Tempur-med
The TEMPUR-MED Dental Neck Pillow
With an anatomically correct shape, the TEMPURMED Dental Neck Pillow is designed to increase the
level of comfort experienced by the patient. The
neck pillow provides support and pressure relief for
the head and neck during the treatment session.
Adjustable strap for easy attachment to any dental
chair.
6.2°/ Laboratory
6.2.1°/ Blazer pen
and Blazer pen ( Rechargeable )
# 401-007
from Prodont Holliger :
Blazer 2000 ( Rechargeable ) # 401-006
Microtorch II
6.2.2°/ Orthocryl
Pg 53
6.2.3°/ Screws from Lewa, Dentaurum, Forestadent
Pg 55
Pg 56
Pg 57
6.2.4°/ Laboratory Wire
Soft / 600-800 N/mm², Hard / 1500-1600 N/mm² or ,Spring hard / 18002000 N/mm²
6.2.5°/ Retainer Cases
- From Lancer, simple, small or large, colors , Neon Green, Neon Green, Neon
Pink, Neon Tangerine, Yellow, Green, Red, Blue, Black,Turquoise, White
- With holes Small or Large,
6.2.6°/ Assistent
6.2.7°/ Balance , typodont, waxes, teeth …
Pg 58
SECTION VII
Hygiene & Accessories
7.1°/ Hygiene
7.1.1°/ HUCKERT'S
Cleaning and Disinfection
UMONIUM38
is the ideal alternative disinfectant.
This synergistic compound, the result of an
association of three active principles,
enables the destruction of bacteria, fungi
and yeast, viruses, mycobacteria and
spores. This ultra-powerful product has
remarkable safety features for the
operator (low toxicity, no hazardous
vapours), for hardware and equipment
(non-corrosive, stable, non-flammable)
and for the environment (fully
biodegradable).
A 2-in-1 product. : Concentrated cleaner-disinfectant – for cleaning and disinfecting medical instruments and equipment.
PRE-DISINFECTION :
UMONIUM38 is used in pre-disinfection and in the disinfection phase. Pre-disinfection is a crucial stage which
requires flawless execution to properly prepare the medium to be disinfected. A 0.5% solution of UMONIUM38
disaggregates the organic matter and enables traces of blood to be dissolved. The product is applied by wet wiping
or soaking. It is very effective for use in ultrasound baths.
DISINFECTION :
The same product enables intermediate level and even high level disinfection (0.5% and 2.5%)
Dual action:
1- It can be used in the pre-disinfection phase by soaking, and is
very effective in dissolving traces of blood and disaggregating
organic matter. A solution can also be used in ultrasound baths. A
2-in-1 product.
Concentrated cleaner-disinfectant – for cleaning and disinfecting
medical instruments and equipment
2- For disinfecting non-invasive and/or heat-sensitive instruments, it
guarantees a very broad activity spectrum in a very short contact
time. A 2.5% solution can then be applied, and may be re-usable on
condition that it is perfectly clean and transparent. The solution
must be changed at the end of every day.

High level (> 5 logs) bactericidal, fungicidal, virucidal,
sporicidal (special procedure, please contact us) disinfectant

Used in wet wiping and soaking; can also be used in
ultrasound baths

Effective against MRSA, Hepatitis B, C, Rotavirus, HIV, HSV,
etc.

Remarkable capacity: 5 litres diluted at 0.5% give 1,000 L of
disinfectant solution



No glutaraldehydes or enzymes


Biodegradable (OECD 301B)

Conforms with DE93/42/EC on medical equipment
Stability of concentrated product: > 36 months

Non-flammable
Non-corrosive (pH=7), so compatible with optical fibre,
polycarbonate (incubators), acrylic compounds, glass, Pyrex,
PVC, HDPE, PET, neoprene, latex, silicone, paints, steel,
stainless steel 410, etc.
Non-coagulant with organic matter, no toxic vapour,
not harmful on contact with skin
Conforms with European standards EN 1040 - EN 1275 EN1276 - EN 13624 - EN 13727 - EN 14561 - EN 14562 - EN
14563 - EN 14348 - EN 14476
Pg 59
UMONIUM38 Medical Spray
By 5l
UMONIUM38 Medical Spray
The indispensable tool for the health
professional.
This ready-to-use product, a formidable germ
killer, is available with two types of spray: either
as a jet or as a foam applicator. The spray has a
capacity of more than 1,000 jets or 200 m2 of
surface to be treated.
Our disinfectant-impregnated wipes, UMONIUM38 Medical Tissues,
Disinfectant wipes – suitable for small surfaces and instruments
guarantee fast safe disinfection of non-invasive instruments.
They are non-corrosive (pH = 7) and therefore ideally suited for materials such
as optical fibre, polycarbonate, acrylic, glass, Pyrex, PVC, HDPE, PET, neoprene,
latex, silicone, paints, steel, stainless steel 410, etc
PHYTOGEL Sanitizer or PHYTOGEL MEDICAL
Protective hydro-alcoholic solution for disinfecting the hands
Phytogel Sanitizer is the master tool for combatting nosocomial infection
(MRSA, Clostridium d., etc.); in fact its active principles settle in creases in
the skin and prolong the disinfection effect. When applied regularly, it
forms an effective broad spectrum barrier against hand borne
contamination.
UMONIUM38 Air Control : The Original!
Often copied but never equalled, this concentrated natural vegetable extracts based product is clean, cleans
the atmosphere and is remarkably effective in removing bad smells, Unbelievably concentrated, it is of
superior professional quality, and not to be confused with a supermarket item, It has a very refreshing
natural fragrance; It is long lastingly active on the most stubborn smells; 100 ml of product delivers around
900 sprays; Ultra concentrated and effective, a single spray is enough for 20 m³; This product also comes in
an electronic diffuser programming the spray frequency; Stability: > 36 months
Pg 60
7.1.2°/
# 735-697
Product features
Instrument bath with a practical automatic lifting mechanism
Hygienic cleaning of medical instruments
Integrated date display
Instrument bath for the hygienic cleaning of medical instruments
The practical lifting mechanism raises the instrument tray out of the solution when the bath is opened. This allows the instruments to
drain prior to removal. The unique side flap on the instrument tray allows it to be emptied easily. Quality assurance is provided by the
integrated date display which allows the changing of solutions to be controlled better.
7.1.3°/ Ortho Hygiene kit
A new way to compose your kits, with or without Vitis products
and compounds with
Toothpaste Orthodontic
Vitis 15ml,
MouthrinseVitis 30 ml
Toothbrush
Travel Toothbrush
Interproxi brush
Mirror
Timer
Wax
Disclosing tablets
Pg 61
7.1.4.°/ Gloves and Masks
Description:
Pediatric patients and doctors love our funny face masks. The
masks feature four delightful characters: dog, clown, rabbit, and
cat designs. They are molded, soft, and manufactured with an easy
breathing material. The masks also contain a non-glare nosepiece
and are made without fiberglass or latex. Also available in an
assortment package containing 10 of each character.
ref
Rabbit mask ( 50 )
801-130
Dog mask ( 50 )
801-131
Cat mask ( 50 )
801-132
Clown mask ( 50 )
801-133
Assorted mask ( 50 )
801-134
7.1.5°/ Zoo animal Teaching aids
Pg 62
SECTION VIII
Pliers, Instruments and Accessories
8.1°/ Les Pinces
HU-FRIEDY,
TASK,
BONTEMPI,
MEDESY,
DENTRONIX,
AEZ,
ETM, ...
8.1.1°/ HU FRIEDY
Pg 63
8.1.1.1°/ Slim Collection
Less is more.
Your day is nonstop as an orthodontist. A steady flow of patients, an overwhelming schedule, plus the pressure
to create beautiful, functional smiles for each and every patient. What if you could improve procedural time,
enhance patient comfort and have more consistent, reliable outcomes through less instrumentation?
Good news — Hu-Friedy has the solution for you!
Introducing the Hu-Friedy Orthodontic Slim Collection— eight instruments that feature a slimmer working end.
Less instrumentation means:
• More intraoral adaptation
• More intraoral maneuverability
• More patient comfort
• More time savings allowing for more patient education
Crafted with the finest materials and techniques, the Hu-Friedy Orthodontic Collection lasts longer and performs
better than any other ortho instruments in the market. With Hu-Friedy Ortho instruments, your best is about to get
better for you and for your patients.
DID YOU KNOW?
Unlike most orthodontic instruments on the market, Hu-Friedy Orthodontic
instruments are designed to withstand the rigors of steam sterilisation while still
maintaining their beauty and functionality, time after time.
678-506
Distal Clinch Back Hard
instrument
Pg 64
678-501 Ultra Slim Weingart
678-504 Ultra Slim Direct
Bracket Tweezer
678-505 Ultra Slim Buccal
Tube bonder tweezer
678-502
Ultra Slim Hammerhead
678-503 Ultra Slim Band
Removing Plier
Pg 65
8.1.1.2°/ Cutter
678-101 *
Universal Cut &Hold distal
end cutter
<.021x.025
678-102
Universal distal end flush
cutter
<.021x.025
678-103
Hard wire cutter 15°
<.022x.028
678-105
Multi-Use cutter
<.015
678-104
Hard Wire cutter
<.022x.028
678-111
Flush Cut &Hold distal end cutter
<.020
678-107 *
Micro mini ligature
cutter <.012
678-110
Micro ligature
cutter 15° <.012
678-109
Micro mini ligature
cutter 15° <.012
678-106
Mini ligature cutter
<.012
8.1.1.3°/ Utility Pliers
678-201 *
Weingart Plier
678-202
Slim Weingart Plier
678-203
How Plier Straight
678-206
Adhesive removing
plier
678-207
Posterior Band
Removing Plier
678-204
How Plier Offset
678-205
Band seating Plier
678-208
Posterior Band Removing
plier short
678-210
Separating plier
Pg 66
678-212
Direct Bond
Bracket Holder
678-212M
Small Tip
678-222
Steiner plier
678-211
Coon ligature plier
678-307
Arch Bending Plier
678-307S
Slim Arch Bending
Plier
678-308
Rectangular Arch
Plier
678-220 L
Angled Removing Plier
678-309
Lingual arch Plier
678-216
Tip Back Plier
678-310
Hollow shop Plier
678-219
Bracket removing Plier
678-301
Jararbak Plier
678-302
Three jaw long plier
678-312
Mini Three jaw plier
678-304
Bird beak Plier
678-305
Light Bird beak Plier
678-318
Light wire
bird beak plier
8.1.1.4°/ Wire Forming Plier
678-303
Omega loop Plier
678-311
O'Brien plier
678-317
De la Rosa plier
678-319
Nance plier
Pg 67
678-322 Three Prong niti
plier
678-315 General plier
678-316 Marcotte plier
678-321 Vstop plier
678-306 Tweed Loop Plier
678-320 Adams plier
678-325
Bird Beak cutting Plier
678-326 Long Bird
Beak Plier
678-323
Optical looping plier
8.1.1.5°/ Handle Instruments
The choice of handle and the choice of heads
LD 1
LDG2
A large choice in the Hu Friedy catalog
678-330
Mathieu for elastic
678-331
Mathieu wide tips
678-332
Mathieu + tg
NH5074
Mathieu + tg
NH5074E
Mathieu + tg
68
8.1.2°/ MEDESY
Pg 69
8.1.3°/ TASK
8.1.3.1°/ Cutting pliers
TK30-604W max .016"
TK30-605 W max .016"
TK60-604 max .015"
TK60-606S W max .016"
TK60-620 max .016"
TS-15 max .016"
TK60-605 max.016"
TK60-604 H max .020"
P 400 Ligature Cutter 40 °
P 410 Reversed ligature cutter
TK30-550S max .022x.028"
TK30-550 FL max .022x.028"
TK30-550 SL max .022x.028"
TK30-550SF max 022x.028"
Pg 70
TK30-550 max .022x.028"
TK Flat Cutter max 1.2mm
TK60-004 max 1.5mm"
8.1.3.2°/ Utility pliers
TK 60-306 T / 60-306
How plier TK 60-307 / 60308
Weingart plier
TK 30-502 T / 60-501 T
TK 60-504
Weingart Small
TK 60-313L
TK 60-313T
Bird beak TK 30-316T
TK 60-313
Cutting TK 30-315C
TK 60-214T
TK 60-006 Hollow shop
TK 60-314
TK 60-315
TK 60-223T
TK 60-223TG
TK 60-213 Jarabak
TK 60-202T
Pg 71
TK 60-074 Young plier
Tweed, TK 60-305
TK 60-224 T
TK 60-430 C
Torquing plier TK 60-303
TK 60-304
TK 60-304TR
TK 60-302 Nance
TK 60-334T
TK 60-335T
TS 25
TK 60-104 TL
TK 60-333
TK P-500 Lingual Bracket removing plier
Long handle
TK P 200
TS 26
TS 30
Pg 72
TK P710 Lingual Bond
removing plier
TK 60-332T Bond removing plier
TK P210 Bond removing plier
TK P700 Lingual Bond
removing plier
TK 60-446
TK P 220 Crimping plier
TK 60-225T
TK 60-009
TK 60-900 cinch back
plier
TK P300 Lingual Utility Plier
Torque Plier # 653-131
8.1.4°/ Instruments
Pg 73
8.1.4.1°/ Tweezers
OT-322
Direct bond Tweezer
OT-203
Direct bond Tweezer
OT-201
Curved Direct bond Tweezer
OT-209
Keat buccal Tweezer
G145 R
Reverse Action Keat
G148 MB Direct bond Tweezer
08-275
Diamond tweezer
60-815
Bracket Placer
Pg 74
8.1.4.2°/ Ligating instruments
Pg 75
TK 60-216
TK 60-217
TK N215
TK 60-215R
F 501-0869
Pg 76
TK 60-218 / N 802 courbe
TK 60-101 C
TK 60-102
8.1.4.3°/ Ligature director
Ligature tucker, M 414-415
Ligature - Scaler U15, LM 414-150
Ligature Director
# 652-160
Ligature Director - Straight
# 652-125
8.1.4.4°/ Band Pusher
Pg 77
TK 60-815
TK 60-810 / TK 60-811
8.1.4.5°/ Height Gauge and miscellaneous instruments
# P 1090-00
# 200-103 + 801-0097
Dynamometres pen
Correx
TK 60-840 Arch Turret
Pg 78
Plier Case # TK 60-99 XXX
The George gauge
Vinyl Color Sleeves or rings for pliers
Calipers
# 029-360
# 042-750
# 028-353
Ormocepha
# 029-361-01 # 004-367
# 760-0000
# 003-366
Pg 79
8.1.5°/ Pliers Stand
Pg 80
SECTION IX
Pedodontie
9.1°/ PEDO JACKET CROWNS
A FREE bottle of primer is included with each
120 crown Anterior Pedo Jacket starter kit.
Using Pedo Jacket Crowns you can give your patients a beautiful smile in one
appointment. These cost effective jackets are easily sized and trimmed with
scissors,and can readily adapt over irregular teeth. Their thin yet strong
interproximal wall will allow you to place multiple adjacent resttrations with a
minimum amount of tooth reduction. Manufactured of a co-polyester material,
these crowns will not split, stain, or crack. Cementation is also easy. Using a
plastic primer, they can either be bonded into place with composite resin or
cemented with a glass ionomer cement. Pedo Jackets are ideal for both the
upper and lower dentition. They are also available for the upper primary 1st
molar.
Ref
120 Crown Kit, anterior
Replacement Crowns, 5 per box
9.2°/ PED. STRIP CROWNS
9.3°/ PEDIATRIC CROWN
Look at these features: -Parent/Patient Pleasing, -Ideal for Ankylosed Tooth
Build-ups, -Simple to Fit and Trim, -Removal is Fast and Easy, -Easily Matches
Natural Dentition, -Leaves Smooth Surfaces, -Easy Shade Control w/ Composite,
-Superior Esthetic Quality, -Ideal for Photo Curing, -Crystal Clear and Very Thin, Large Selection of Sizes
Exist for first and second molar
Ref
120 Crown Kit, anterior (Replacement Crowns, 5 per box)
# 450-700
A revolutionary new white-faced stainless steel pediatric crown made of new
material that can be crimped on facial and lingual. These crowns can also be
squeeze on the mesial and distal to allow for better adaptation without the fear
of compromising the bond strength. Flex crowns are a pediatric white shade and
1mm shorter than standard stainless steel crowns, which will save you valuable
chairtime.
FEATURES AND BENIFITS : May Be Crimped on the Facial and Ligual
Pediatric Light Shade - To Match Natural Dentition, 1mm Shorter than Standard
Crowns, Trimmed with Scissors or Green Stone, May be Squeezed on the Mesial
and Distal, Save Chairtime
Ref
Available in: Upper - Right and Left - Centrals and Laterals
- Sizes 1-6, Kit Includes 1 of each size = 24 crowns
9.4°/ PEDIATRIC WHITE-FACED
CROWNS
# 450-200
# 470-ABC
Pediatric White-Faced Crowns, Unique Features and Benefits,Facial and Lingual
May Be Crimped, Facial and Ligual Easily Trimmed With Crowned Scissors, Easily
Festooned, Full Knife-Edge Margin Capabilities, New materials and enhanced
manufacturing techniques allows to offer you this crown at a price of, a
substantial savings over similar crowns. Available for the upper, right and left
centrals and laterals with 6 sizes for each tooth, Starter Kit includes: Centrals,
left and right sizes 2,3,4 two of each Laterals, left and right sizes 3,4,5 two of
each
Ref
Dura Crown Starter Kit, 24
# 470-300
Pg 81
9.5°/ THE NEW PEDO
COMPU-CROWN
These are our standard stainless steel pediatric anterior crowns faced with a high
quality composite. Mesh based with a light cured composite these crowns are color
stable, plaque resistant, and match natural pediatric shades. Available for the right
and left central and lateral as well as cuspids, these crowns are an ideal addition to all
practices treating special pediatric patients.
Look at these features and benefits
Will Not Aggressively Wear Opposing Dentition, Easily Adjusts, Color Stable,
Feels Natural, Shade Matches Natural Dentition, Compu-Crowns Stainless Steel Pedo
Crown Kit
Kit includes: Centrals, left and right sizes 2,3,4 two of each Laterals, left and right sizes
2,3,4,two of each
Ref
Starter Kit 24 pieces
# 470-000
9.6°/ PREFORMED SPACE MAINTAINERS
If you need a space maintainer in a hurry these kits are ideal. Imagine, no
impressions, no models and no lab fees. These space maintainers are available
with stainless steel crowns or stainless steel bands with an assortment of
attachments. There is no welding or soldering required and they are fully
adjustable to different edentulous spans. Replacement components have been
made to be compatible with performed space maintainer crowns and bands.
They are available in narrow and wide, with rests or without rests, and drop
loops or distal shoes.
Upper size from 25, 26, 27 ... until 42
Lower size from 25, 26, 27 ... until 42
Ref
Starter Kit 50 pcs
DeLuxe Kit 100 pcs
9.7/ Titanium Trauma Splint
IDEAL METHOD FOR SPLINTING OF TRAUMATIZED TEETH.
- Indication : Stabilization of teeth after repositioning or replantation in
original position
- TTS advantage for the dentist : User friendly handling, Easy adaptation and
fixation, Manual shaping of the splint. Time reduction in simple splint
application and removal, Optimized splint design
- TTS advantages for the patient : Improved comfort: minimal impairment of speaking, eating and oral hygiene
in comparison with conventional splints
Case 1 : (Dr Michael Bornstein )
Case 2 : (Dr Yves Germanier )
This 15-year-old patient was adlitted
following a road accident. Avulsion of 1/1
(21,11) showed an enamel-dentine fracture
without involvement of the pulp. /1 (21)
was replanted and stabilized for 10 days by
means of the TTS
Complex tooth trauma in a 13-year-old girl
after a fall while climbing. Avulsion of /1
(21), root fracture of 1/ (11) in the cervical
third of the root
( crown fragment could not be found
anymore) and 2/ (12) with a fracture of
the crown without involvement of the
pulp. /1 (21) was replanted and fixated for
the two weeks using the TTS
TTS-1002, : 52 mm x 0.2 mm
TTS-1004, : 100 mm x 0.2 mm
# 440-200
# 440-220