Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Caldita-Barossa Marine Seismic Data Acquisition Overview Fact Sheet - August 2016 • ConocoPhillips is currently acquiring three dimensional (3D) marine seismic data in an area of the Timor Sea, 300 kilometres north of Darwin. • Data is being acquired in Retention Lease Permits NT/RL5 and NT/RL6, known as the Caldita-Barossa assets, as well as some adjacent open acreage. The permit areas are in Commonwealth waters of the Bonaparte Basin • ConocoPhillips operates NT/RL5 and NT/RL6 on behalf of co-venturers Santos Offshore Pty Ltd and SK E&S Australia Pty Ltd (SK). The permits are granted and administered pursuant to the Commonwealth Offshore Petroleum and Greenhouse Gas Storage Act 2006 • ConocoPhillips has been successfully undertaking activities within the permit areas since 2004 and can demonstrate a history of safe and environmentally responsible actions as well as a strong understanding of the area’s key environmental features and sensitivities • The Environment Plan (EP) enabling data acquisition until 30 September 2016 was accepted by the Commonwealth regulatory body for offshore oil and gas activities, NOPSEMA, on 27 July 2016. Because we expect to need to continue acquisition beyond this date, ConocoPhillips has submitted an EP Revision to NOPSEMA to allow acquisition to continue until 31 October 2016. • The data acquisition is part of the ongoing appraisal program for potential future field development. The presence of significant accumulations of natural gas has been previously confirmed in the permits and the coventurers are now determining whether the recoverable resource can be commercially developed. The seismic data results, as well as further appraisal drilling planned for 2016/17, will help to further delineate the existing reservoir and inform engineering design. Acquisition Methods Marine seismic acquisition is commonly used in the oil and gas industry to improve understanding of subsurface geology. Data is collected using a purpose-built seismic vessel towing dual acoustic source arrays and hydrophone cables (streamers). Acoustic emissions from the source arrays are detected by the hydrophone cables and recorded on the vessel. The reflected sound is processed to provide information about the structure and composition of the geological formations below the seabed, including hydrocarbon reservoirs. ConocoPhillips has contracted Petroleum Geo-Services (PGS) to conduct the data acquisition. PGS is a highly experienced and credentialed international company that has carried out marine seismic data acquisition over many years in Australian waters. The Ramform Sovereign is accompanied by a logistics support vessel and a chaser vessel that ensures other vessels do not come in close proximity. In direct response to stakeholder feedback, ConocoPhillips has fundamentally redesigned the survey to complete the areas to the South, with potentially largest fisheries impact, first. The redesign has also resulted in the total data acquisition area now being reduced by approximately 10 percent, from 3,186 square kilometres to 2,858 square kilometres. As per the map above, the data acquisition area has been divided into two areas – Area A covers approximately 2,200 square kilometres and Area B, 658 square kilometres. Data acquisition is occurring in Area A first and is planned to be completed by 30 September 2016. Once data acquisition in Area A is completed we will then acquire data within Area B. The indicative boundary coordinates of the operational area are: Easting Northing 627753 mE 8839473 mN 565959 mE 8886038 mN 643855 mE 8989410 mN 708373 mE 8940792 mN 631972 mE 8839504 mN UTM Zone: 52 Water depths in the operational area range from 75 to 550 metres. The vessel tows 16 hydrophone cables, at a length of 6 km at depths of 20 m. The distance between the hydrophone cables is an average 50 m. The total volume of the seismic source proposed for the survey is 4,130 cubic inches. This source size was selected to meet several criteria regarding operational stability, predictable behaviour and fit for purpose subsurface seismic imaging (vertical focus). The vessel collects data along a series of pre-determined sail lines at an average speed of 8-9 km/hour. There are a total of 109 sail lines in the acquisition area, with a total length of 8,384 km and a separation distance of 400 m. The seismic source is discharged at a nominal interval of 8 seconds along each sail line. The seismic source produces peak at source (i.e. within a few metres of the airgun array) sound pulses of zero to peak sound pressure level of approximately 246 dB re 1 μPa @ 1 m, and sound exposure levels of approximately 223 dB re 1 μPa2.s @ 1 m across a frequency range of 10 Hz to 2 kHz. Environmental Studies ConocoPhillips has undertaken an extensive and robust environmental baseline studies program to characterise the existing marine environment within and surrounding the Caldita-Barossa fields, as part of the Company’s commitment to understanding and protecting the environment and to support the potential future development of the Caldita-Barossa fields. The studies were undertaken in conjunction with a range of expert research partners and consultancies. Data collection occurred across the region to understand water and sediment quality, benthic habitat, infauna and fish communities, met-ocean and meteorological conditions (e.g. currents, wave heights, wind speed) and underwater noise. As part of the program, the Australian Institute of Marine Science (AIMS) also conducted a survey of the seabed biodiversity and fish communities of offshore shoals and within the proposed Oceanic Shoals Commonwealth Marine Reserve (designated as a Multiple Use Zone). Environmental Approvals On 27 July 2016, an Environment Plan (EP) for the data acquisition was accepted by the National Offshore Petroleum Safety and Environmental Management Authority (NOPSEMA) in accordance with the Offshore Petroleum and Greenhouse Gas Storage (Environment) Regulations 2009. This enabled data acquisition to occur until 30 September 2016. The acceptance decision is available at: https://www.nopsema.gov.au/assets/epdocuments/A494813.pdf. Because we expect to need to continue acquisition beyond this date, ConocoPhillips has submitted an EP Revision to NOPSEMA to allow acquisition to continue until 31 October 2016. Environmental Management ConocoPhillips is committed to conducting all activities and work in a manner that is safe for our employees, contractors and the public, which protects the environment and adds value to the communities where we live and work. All activities conducted by ConocoPhillips are subject to rigorous environmental risk assessments and planning, and undertaken in strict compliance with all relevant legislative requirements. It is recognised that marine seismic surveys can affect the marine environment, with the main environmental concern being their repetitive use of a high-energy noise source and the effects of this acoustic disturbance on marine animals. Through undertaking a detailed risk assessment process for the activity, ConocoPhillips has identified a range of measures aimed at reducing and managing potential impacts on the environment. The key environmental management measures include: • Use of trained marine mammal observers to look for the presence of marine animals during seismic data acquisition activities • Undertaking the activity in accordance with the EPBC Act Policy Statement 2.1 Interaction between offshore seismic exploration and whales: Industry guidelines • All routine discharges will be disposed of in accordance with the International Convention for the Prevention of Pollution From Ships, 1973 (commonly referred to as MARPOL 73/78) and relevant Australian Marine Orders • Appropriate storage of hydrocarbons and chemicals • Implementation of appropriate refueling procedures to minimise the risk of spills • Preparation of a suitable Oil Pollution Emergency Plan, which includes detailed spill response measures and equipment • Compliance with all Australian quarantine requirements and guidelines to prevent the introduction of invasive marine species. Consultation An important part of the preparation process is to consult with other potential users of the proposed acquisition area during the planned activity period. In the case of the permit areas, ConocoPhillips commenced discussions in October 2015 with commercial fishing operators and other users as well as the Northern Territory and Commonwealth agencies with regulatory roles. Consultation has been conducted and is ongoing with all relevant stakeholders, including those whose operational interests may be affected or those with an interest in the potential environmental, social or economic impacts. From October 2015 to June 2016, ConocoPhillips consulted with all stakeholders during preparation of the EP enabling data acquisition until 30 September 2016. From 31 May to 8 August 2016, ConocoPhillips consulted with stakeholders on the EP Revision in order to address issues or concerns related to new or increased environmental impact or risk that arise as a result of conducting the data acquisition between 1 October and 31 October 2016. All feedback received is considered as part of the environmental risk assessment and management process to assist in the preparation of the formal EP. A summary of all feedback and communication received and given on behalf of ConocoPhillips was provided to NOPSEMA as required under legislation. In direct response to stakeholder feedback, ConocoPhillips fundamentally redesigned the survey, in both time and area, to manage environmental risk and impact and minimise disruption to other users of the marine environment for the data acquisition that would need to occur during October 2016. ConocoPhillips recognises that we share equal access rights with other users of the marine environment and has specific arrangements in place with these stakeholders to ensure they are kept appraised of our activities during the data acquisition period and have ongoing opportunity to seek information or discuss any issues or concerns they may have. Other stakeholders can also continue to contact ConocoPhillips via the details below. ConocoPhillips is committed to responsible oil and gas production and achieving excellence in everything we do. The essence of the ConocoPhillips brand is Accountability and Performance. Our SPIRIT Values, comprising the principles of Safety, People, Integrity, Responsibility, Innovation and Teamwork, set the tone for everything we do. By conducting our business in accordance with these values, we will continue to deliver energy sustainably and responsibly. About ConocoPhillips ConocoPhillips is the world’s largest independent oil and gas exploration and production company, based on proved reserves and production. Headquartered in Houston Texas, ConocoPhillips has more than 15,600 employees and assets in 21 countries. ConocoPhillips Australia is the operator of the Bayu-Undan facility located in the Joint Petroleum Development Area of the Timor Sea. ConocoPhillips’ portfolio includes the Darwin LNG facility in the Northern Territory and Australia Pacific LNG facility in Queensland. We also have exploration and appraisal projects offshore from Australia including the Greater Poseidon, CalditaBarossa and Greater Sunrise fields. You can communicate to ConocoPhillips in any manner convenient to you (post, email or phone). All input is carefully considered, formally recorded and a response provided. Please direct comments to: Michael Marren - External Relations Adviser PO Box 1102, West Perth WA 6872 Tel: +61 8 6363 2644 Email: [email protected] Find out more www.conocophillips.com.au