Download O R T H O D O N T I C

Issue Five 2015-2016
O
R
T
H
O
D
O
N
T
I
C
INSIGHT
A
C E R U M
O R T H O
N E W S L E T T E R
&
S P E C I A L
Articles – Page 2 & 3
Carriere® SLX™ Self Ligating
Bracket System
Dr. Luis Carrière
Continuing Education – Page 4 & 5
Examination of Class II Treatment
Dr. Scott Frey DDS MSD
Facially Driven Orthodontics
Dr. Luis Carrière DDS, MSD, Ph.D
Case Highlights - Pages 6-13
Carriere® Motion™ Class III
Appliance
Dr. Luis Carrière
Carriere® Motion™ Appliance
Class II Div. 2
Dr. Serge Sanovic BSc, BA, BEd,
MDS, DMD, Cert Ortho, FRCD (C)
Carriere® Motion™ Appliance
Interceptive Orthodontics
Dr. Khaled Sharaf B.Sc., DMD,
MBA, M.Sc, FRCD(C)
Class II Correction in a
Non-Growing Female
Dr. Frey DDS, MSD
A CANADIAN COMPANY
Dr. Luis Carrière
“ADVANCING
THE FUTURE OF
ORTHODONTICS”
Carriere® SLX™
Self Ligating Bracket
System / Wire Sequence
2
The Bracket Widths are tooth-specific bracket
sizes: wide teeth require wider brackets and
narrow teeth require narrow brackets. This
provides greater rotational control reducing
the need for wire adjustments, faster and
better finishes.
Carriere SLX
2
.12
0
.12
0
0
.12
 Ph.D. Degree University of
Barcelona (Cum Laude) (UB)
2006
 DDS degree by the
University Complutense of
Madrid (UCM)
 MSD degree by the
University of Barcelona (UB)
 Winner of the “Joseph
E. Johnson Award”.
American Association of
Orthodontists. San Francisco
May 1995.
 Inventor of the Carriere®
Motion™ and the Carriere®
SLX™
 Dr
Dr. Carrière has been the
invited Professor at the
Orthodontic Departments in
several Universities of USA,
Europe, and Asia
Dr. Carrière is an international
lecturer and inventor of the
Carriere® Motion™ Appliance
and the Carriere® Self-Ligating
Bracket Systems. He received
his PhD in Odontology “Cum
Laude” from the University of
Barcelona in 2006, following
under and graduate degrees
from the Universidad
Complutense of Madrid and
the University of Barcelona
respectively. Dr. Carrière is also
the winner of the prestigious
“Joseph E. Johnson Award”
from the American Association
of Orthodontists. Dr. Carrière
is in private practice at the
Carriere Orthodontic Centre
in Barcelona and is an invited
professor at the Orthodontic
Departments at several
universities.
0
.12
DDS, MSD, PhD.
.11
5
3
Clean and clear Visual cues in the frontal face
of the bracket, 5 vertical and 6 horizontal
references, will improve the bracket-totooth visualization for exceptionally accurate
bracket placement and, consequently, less
need for re-bonds and wire bends.
4
Reduced Profile Height results in less toothto-bracket impingement, maximum patient
comfort, superb torque control and less
occlusal interference.
INVENTOR OF THE CARRIERE® SYSTEM
Dr. Luis Carrière
.130
0
.13
I am pleased to present the New Carriere
SLX bracket, a team effort to create the
most unique Passive Self-Ligating bracket
in the world.
The New Carriere SLX has a “State of the
Art” Design with Elegant, Accurate and
Minimalist traits.
.130
.13
0
5
.11
Our objective as a team was to create a
High End Treatment System for the finest
orthodontic result.
Minimally invasive orthodontics with
maximum respect for the patient and the
highest level of mechanical efficiency was our
ultimate goal !
I am confident that you and your patients will
benefit from our efforts to create the New
Carriere SLX world class appliance.
Some of the enhancements that you will find
in this new Carriere SLX Self-Ligating Bracket
are:
1
The slot depth has been carefully adjusted
to .028 in order to reduce the play in the
slot increasing the precise tooth first order
control, maximum effectiveness of torque
and great rotational control. This will provide
faster and better finishes of your cases.
5
.028"
.083"
.03
.028"
Carriere SLX U1R
O
The new Sliding Mechanism (Sure-Lok Clip)
is a completely new external C type clip for
reliable, smooth and consistent opening/closing.
You will feel the audible click in the opening/
closing and a second audible click in the total
open position. This will provide an accurate stop
at the open position for easier wire placement.
The Sure-Lok TM Clip will also allow easy access
for brushing and will substantially reduce
calculus retention and binding.
TM
6
Direction of door opening/closing.
The Carriere SLX sliding doors open
towards the incisal edge/occlusal
plane. In the lower arch this allows
for easier access and eliminates
gingival impingement.
9
A completely New Etched
Bonding Bracket Base with
the new Adhesive Guard Rail
Technology on the occlusal and
gingival edges. These rails direct
adhesive to the Mesial and Distal
for faster, more predictable and
easier cleanup.
Incisal Edge
he Carriere Wire Sequence is a maximum
T
of 5-6 wires:
PHASE 1 (10-20 weeks)
Initiate tooth movement; begin aligning
and leveling teeth; begin correcting
rotations and start maxillary transverse arch
development.
1st Wire
The new .013 Cu™ Nitanium®
27°C D-LX™ Shape Archwire with stops
- severe crowding
or
The new .014 Carriere Cu Nitanium
27°C D-LX Shape Archwire with stops
- moderate crowding
PHASE 2 (20-30 Weeks)
10 Our New physiologically friendly
Carriere Archwire Sequence
for maximum tooth movement
efficiency and patient comfort.
7
Fully Functional Tie Wings have
ample space and deep undercuts.
The use of elastic or metal ties will
allow friction on demand and patient
colour preferences at certain times
of treatment. Those deep under-cut
tie-wings are ideal to secure chain
and ligature elastic or metal ties.
Deep
Under-Cut
Tie Wing
Finish aligning and leveling; resolve
remaining major rotational issues; begin
torque control and space consolidation
in the anterior; correct angulations and
continue with adequate arch development
if necessary.
2nd Wire
The new .014 x .025 Cu Nitanium
27°C D-LX Shape Archwire with stops
- Place in well-developed arches
3rd Wire
The new .017 x .025 Cu Nitanium
35°C D-LX Shape Archwire with stops
- To express additional torque &
prepare for CNA Archwires
4th Wire
The new .019 x .025 Carriere Cu Nitanium
35°C D-LX Shape Archwire with stops
- To express additional torque & prepare
for CNA Archwires
PHASE 3 (10 Weeks)
8
We have incorporated traditional
fully-integrated hooks on demand.
Those hooks are far less expensive
and cannot be dropped or lost.
Major mechanics to correct the anteroposterior relation, make most final torque
adjustments, consolidate space closure
in the posterior segments, adjust buccal/
lingual discrepancies and establish patient
specific arch form.
5th Wire
The new .019 x .025 CNA™ Beta III Arch
PHASE 4 (2 Weeks)
This is used only for final minor rotations.
6th Wire
The new .021 x .027 Bio-Kinetix®
Thermally Activated Nitanium® Archwire
Our Commitment: To continue working
hard for you and for your patients.
Our Goal: To make life easier for your
patients with fast, natural, gentle;
physiological and minimally invasive
orthodontic treatment.
All trademarks or registered trademarks are owned by their respective companies.
3
CE Courses
An Examination of Class II Treatment
CASE SELECTION CRITERIA AND MECHANICS FOR OPTIMAL DENTOFACIAL
ESTHETIC OUTCOMES
Dr. Scott Frey, DDS, MSD
Education
 Graduate of the University of the Pacific Arthur A. Dugoni School of Dentistry
 Post-doctoral master’s degree and certificate in orthodontics from the University of Colorado
Professional Organizations
 Board Certified in Orthodontics
 Top 1% provider of Invisalign
 World Congress of Minimally Invasive Dentistry
 American Academy of Facial Esthetics
Professional Achievements
 Pioneered the development of the Soft Tissue
Orthodontics curriculum for Henry Schein Orthodontics
 Maintains a private practice exclusive to cosmetic and
therapeutic injectables
 National expert and lecturer on esthetic orthodontics
 Published scientific author
 Reviewer for the Journal of Aesthetic Plastic Surgery
COURSE DESCRIPTION
This course will explore new understanding of dentofacial esthetics and provide strategies for achieving functional
and esthetic excellence in treatment. There will be special focus on effective implementation of the Carriere Motion
appliance and why shifting the focus for Class 2 correction to the beginning of treatment will reduce time in braces
and produce better outcomes. Additionally, we will look at how practitioners can leverage advances in bracket
design, Botox, and digital technology to reduce chair time and become more efficient and profitable.
IN THIS SEMINAR, YOU WILL LEARN
 Advanced Esthetic Analysis to Benefit Class 2 Treatment Selection
 How to use the Carriere Motion appliance effectively
Why early AP correction facilitates better orthodontic outcomes
 Neuromodulator Enhanced Orthodontics
 Efficient use of intraoral scanners to reduce appointments
*
CALGARY
Nov 14, 2015
TORONTO
Nov 21, 2015
* Courses, Dates, Cities and Content are Subject to Change.
4
For further details and to register, call 1-800-661-9567; e-mail [email protected] or register online at www.aurumgroup.com
Achieving Complete Facial,
Skeletal and Dental Harmony in Class II & Class III
treatments. Facially Driven Orthodontics.
WITH THE CARRIERE® MOTION™ APPLIANCE AND SELF LIGATING BRACKET SYSTEM
Dr. Luis Carrière, D.D.S, M.S.D., Ph.D.
Ph.D. Degree (Cum Laude) University of Barcelona (UB)
2006
DDS degree by the University Complutense of Madrid
(UCM)
 MSD degree by the University of Barcelona (UB)
Winner of the “Joseph E. Johnson Award”. American
Association of Orthodontists. San Francisco May 1995.
 Winner of the International Design award Delta Gold ADI-FAD 2009 with the “Carriere Distalizer MB”
 Member of the Editorial Review Board of the American Journal of Orthodontics and Dentofacial Orthopedics (AJO-DO).
 Contributing editor of the Journal of Clinical Orthodontics (JCO).
 Inventor of the Carriere Distalizer and the Carriere Self-
ligating Bracket
 Invited Professor at several Orthodontic Departments of Universities in USA, South America, Europe and Asia.
 Invited speaker around the world.
COURSE DESCRIPTION
Orthodontics is a facial, skeletal and dental speciality. None of those three areas can be isolated in an Ortho
treatment as all of them are in a complete interrelation.
The practitioner is responsible of the facial harmony of the face of the patient.
 Carriere Motion Appliance is a Sagital corrector that will work into the correction of our Class II and Class III cases in a minimally invasive approach for non extraction orthodontics.
The use of the Carriere Motion Appliance as a non-extraction, predictable and minimally invasive distalization
approach for Class II and Class III malocclusions will be discussed.
Aspects as principles developed by nature for optimization of material and force with elegance of forms will be
studied as well as the reduction of a design to an extreme for maximum function optimization. The result will be
a nature-objectified design in the morphology of new innovative devices such as the Motion and the Carriere selfligating bracket.
 Dr. Carriere’s lecture will cover the rationale of their function and will present the protocol of their use, will also discuss the resolution of orthodontic space problems related to friction created, as well as clinical considerations of new technology wires in the achievement of biologic friendly action.
 The objective is to present a predictable and simple orthodontic method. The key is to achieve, as the very first step of the treatment, a Class One Platform of the posterior segments from molar to canine by distalizing them as a block into Class I Platform relation. From this point on, the treatment can be continued from the achieved Class I with a low force passive self-ligation fixed protocol.
 The newly designed Carriere SLX Self-Ligating Bracket System establishes a new standard in excellence and performance in a passive self-ligating bracket. Many of the newly designed innovations were clinician driven to provide us with clinical effectiveness and efficiency.
 In this presentation you will discover many of the innovative features of the Carriere SLX Bracket System. All designed to meet your ultimate goals in:
1) effective case management.
2) optimal tooth positioning.
3) meticulous case finishes.
3 LEARNING OBJECTIVES
1. Learn how to control distalization with predictability.
2. Learn how to accomplish a solid class I posterior platform
in Class II and Class III cases.
3. Learn how to simplify and optimize the orthodontic procedure
and at the same time reduce the treatment period.
*
CANADA LECTURE SERIES
CALGARY
APRIL 09, 2016
TORONTO
APRIL 10, 2016
* Courses, Dates, Cities and Content are Subject to Change.
For further details and to register, call 1-800-661-9567; e-mail [email protected] or register online at www.aurumgroup.com
5
Case Highlights
DR. LUIS CARRIERE CASE HIGH LIGHTS OF EXTRAORDINARY FACIAL AND
DENTAL CHANGES WITH THE NEW CARRIERE® CLASS III MOTION™ APPLIANCE.
Dr. Luis Carrière
DDS, MSD, PhD.
Specialist in Orthodontics and
Dentofacial Orthopaedics
Ph.D. Degree University of
Barcelona (Cum Laude) (UB) 2006
DDS degree by the University
Complutense of Madrid (UCM)
MSD degree by the University of
Barcelona (UB)
Winner of the “Joseph E. Johnson
Award”. American Association of
Orthodontists. San Francisco May
1995.
Inventor of the Carriere® Motion™
and the Carriere® SLX™
Dr. Carrière has been the invited
Professor at the Orthodontic
Departments in several Universities
of USA, Europe, and Asia
Dr. Carrière is an international lecturer
and inventor of the Carriere® Motion™
Appliance and the Carriere® SelfLigating Bracket Systems. He received
his PhD in Odontology “Cum Laude”
from the University of Barcelona in 2006,
following under and graduate degrees
from the Universidad Complutense
of Madrid and the University of
Barcelona respectively. Dr. Carrière
is also the winner of the prestigious
“Joseph E. Johnson Award” from the
American Association of Orthodontists
Dr. Carrière is in private practice at
the Carriere Orthodontic Centre in
Barcelona and is an invited professor
at the Orthodontic Departments at
several universities.
After many years of development and
innovation this year we presented the
Carriere Class III Motion appliance at the
2015 AAO meeting in San Francisco. The
appliance changes the relation in which
the mandible interacts with the maxilla
harmonizing soft tissues and balancing the
face of the patient. The appliance results in
a harmonious facial profile with a minimally
invasive treatment of Class III cases.
We have created a design that is very
clean and simple. It is intended to treat
Class III malocclusions without extractions,
painful orthodontic surgery or traditionally
uncomfortable and obtrusive facemasks.
The Motion Class III changes the occlusal
planes and intrudes the lower molars.
It also extrudes the canines. This extrusion
of canines and intrusion of molars are
welcome in class III and necessary to
change the occlusal plane bringing the
mandible back into a better functional and
PATIENT 1
FACIAL PROFILE INITIAL
INTRAORAL INITIAL
6
esthetic position. The change between
the maxilla and the mandible in Class II
and Class III cases is the main reason why
today the appliance is called The Carriere
“Motion” appliance.
The Carriere Motion appliance will change
the relation between the maxilla and the
mandible. Therefore, in some part, changing
the posterior occlusal planes brings it into a
better functional position; while balancing
the mandible and the maxilla helps to create
Facial, Skeletal and Dental Harmony in our
Class II and Class III cases.
The practitioner is responsible for facially
driven orthodontics for the patient.
It is my goal as an orthodontist to be an
expert in repositioning of teeth and bones
in the correct position and balancing the
patient’s profile.
Patients 1-4 are examples of the Carriere
Class III in “Motion”.
FACIAL PROFILE FINAL
(14 MONTHS TREATMENT TIME)
INTRAORAL
AFTER MOTION
INTRAORAL FINAL
PATIENT 2
INTRAORAL INITIAL MOTION
FACIAL PROFILE INITIAL
FACIAL PROFILE
AFTER 3 MONTHS OF MOTION
PATIENT 3
FACIAL PROFILE
INITIAL (MIXED DENTITION)
UPPER OCLUSAL VIEW
INITIAL
INTRAORAL
INITIAL MOTION
LOWER OCCLUSAL VIEW
INITIAL
PROFILE FINAL
AFTER 5 MONTHS OF MOTION
PROFILE FINAL
AFTER 5 MONTHS
OF MOTION
PATIENT 4
INTRAORAL INITIAL MOTION
FACIAL PROFILE INITIAL
INTRAORAL
AFTER 5 MONTHS OF MOTION
FACIAL PROFILE
AFTER 10 MONTHS TREATMENT
TIME
7
New Speaker
Case Highlight
CLASS II DIVISION 2
Dr. Serge Sanovic
BSc, BA, BEd, MDS, DMD
Cert Ortho, FRCD (C)
Specialist in Orthodontics and
Dentofacial Orthopaedics
DMD, MDS and Certificate in
Orthodontics and Dentofacial
Orthopaedics from the University of
Connecticut
BSc (Biology) and BA (Psychology)
from McMaster University in
Hamilton, Ontario
Bachelor in Education from Brock
University in St. Catharines, Ontario
Dr. Sanovic currently has a private
practice in Stoney Creek, Ontario. He
is a part-time professor at Columbia
University in New York City. Dr.
Sanovic has lectured internationally
to both dentists and orthodontists.
He also is a guest lecturer at various
Dental Hygiene and Dental Assisting
Schools in Southern Ontario. This
year he received the Ontario Dental
Association Merit Award for his work
with his local dental society.
8
Class II Division 2 occlusion
characterized by a retrognathic
mandible and excessive overbite
presents as a challenge for orthodontic
treatment. Some orthodontists
argue that by simply correcting the
angulation of the maxillary central
incisors the mandible will posture
forward automatically correcting the
class II malocclusion. However, in my
experience, this very rarely if at all
ever happens. After correction of the
maxillary incisor angulation, the patient’s
occlusion becomes class II division 1
and the clinician now has to correct
the underlying mandibular retrognathic
skeletal relationship. Treatment with
the Carriere® Motion™ in conjunction
with a mandibular lingual arch allows for
simultaneous improvement in the class II
molar relationship with improvement in
both the overbite and the angulation of
the maxillary central incisors.
retrognathic mandible.
Carriere Motion Appliance placed
bilaterally on the upper 3 to 6 with
a lingual arch with molar tubes and
hooks on the lower 6s. Composite bite
raisers were placed on the occlusal of
the mandibular first molars to prevent
the molar tubes from breaking off the
bands of the lingual arch. Elastics were
prescribed as indicated below.
2 months F1 (6 oz ¼”)
3 months F2 (8oz 3/16”)
INITIAL
FINAL
Patient presents in the adult dentition
with a Class II Division 2 malocclusion
with excessive overbite and a
INITIAL
Figure 1
Figure 2
Figure 4
Figure 5
Figure 6
Figure 7
POST CARRIERE MOTION
Progress photos show the Motion
appliance on the day of removal
which was followed immediately with
full appliance bonding maxillary and
mandibular 6-6. Note the improvement
in overbite and the angulation of the
maxillary central incisors.
Orthodontic wire sequence was
followed to a standard protocol with
Class II elastics prescribed intermittently
throughout treatment. Total treatment
time was 23 months.
Figure 3
Figure 8
All trademarks or registered trademarks are owned by their respective companies.
INITIAL
Figure 9
Figure 10
Figure 11
POST CARRIERE MOTION
Figure 12
Figure 13
Figure 14
FINAL
Figure 15
INITIAL
Figure 18
Figure 16
Figure 17
POST CARRIERE MOTION
Figure 19
FINAL
Figure 23
Figure 20
Figure 24
Figure 21
Figure 25
Figure 22
Figure 26
Figure 27
9
New Speaker
Case Highlight
INTERCEPTIVE ORTHODONTICS WITH THE CARRIERE MOTION
APPLIANCE FOR A BLOCKED-OUT MAXILLARY CANINE
Dr. Khaled Sharaf
B.Sc., DMD, MBA, M.Sc, FRCD(C)
Specialist in Orthodontics and
Dentofacial Orthopaedics
DMD Degree, McGill University,
Montreal, 2001
MBA, McGill University, Montreal,
2003
Master of Science in Orthodontics,
University of Alberta, Edmonton,
2009
Diplomate of the American board of
Orthodontics
Dr. Sharaf completed his dental
training, and Masters in Business
Administration, at McGill University in
Montreal, Quebec. Following several
years in private practice, he pursued
further training in Orthodontics and
obtained his Masters degree from
the University of Alberta in 2009.
Dr. Sharaf is a fellow of the Royal
College of Dentists of Canada,
and a Diplomate of the American
Board of Orthodontics. Dr. Sharaf
is also a member of the Cleft Lip
and Palate Clinic at the University of
Alberta’s Stollery Children’s Hospital.
He maintains a full-time practice at
Horizon Orthodontics.
10
Blocked-out maxillary canines impose
a challenge to the orthodontist as
they erupt into inadequate space. The
option to extract a maxillary premolar to
address this unfortunate situation could
be eliminated with successful molar
distalization. The Carriere® Motion™
Appliance is a suitable option to achieve
this orthodontic objective, especially
if used during the mixed dentition
stage, and prior to the eruption of the
maxillary second molars. The following
case was treated with the Carriere
Motion Appliance and a mandibular first
molar bracket (with hook) bonded in
conjunction with an Essix Retainer. The
following steps and progress took place
over 6 months:
INITIAL
The Carriere Motion Appliance was
bonded from teeth 14 to 16 and 23 to
26 respectively. Patient was 10 years 7
months at the time the Carriere Motion
Appliance was bonded. The initial elastic
protocol was full-time wear of 2.5 oz
1/4” elastics for the first month.
PROGRESS
Patient was instructed to increase the
strength of the elastics on the right side
to 4.5 oz 1/4” elastics (5 months) to
achieve further distalization of teeth 14
to 16. Class I canine relationship was
achieved with the distalization of teeth
23 to 26.
FINAL
Effective elastics wear allowed for the
creation of adequate space for the
eruption of tooth 13 into the maxillary
arch and the correction of the left canine
relationship to class I. The results were
obtained within 6 months, paving the
way for a predictable phase II treatment
for a class I crowded platform.
INITIAL
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
All trademarks or registered trademarks are owned by their respective companies.
PROGRESS
Figure 9
Figure 10
Figure 11
Figure 12
FINAL
Figure 15
Figure 18
Figure 13
Figure 16
Figure 19
Figure 14
Figure 17
11
Case Highlight
CLASS II CORRECTION IN A NON-GROWING FEMALE
Dr. Scott Frey
DDS, MSD
Dr. Scott Frey is a graduate of the
University of the Pacific Arthur A.
Dugoni School of Dentistry and earned
his post-doctoral Master’s degree and
certificate in orthodontics from the
University of Colorado. He is a member
of the Tau Kappa Omega Dental Honor
Society.
Dr. Frey is Board Certified in
Orthodontics, is a Top 1% provider of
Invisalign, and has earned fellowships
from the World Congress of Minimally
Invasive Dentistry and the American
Academy of Facial Esthetics for his
achievements in private practice. He
maintained a private practice exclusive
to cosmetic and therapeutic injectables
during his orthodontic residency and
is a national expert and lecturer on
esthetic orthodontics, facial maturation,
and injectable pharmacologics. Dr. Frey
has pioneered the development of the
Soft Tissue Orthodontics curriculum
for Henry Schein Orthodontics, is a
published scientific author, and is a
reviewer for the Journal of Aesthetic
Plastic Surgery.
12
The modern orthodontic practice is
being asked to deliver more for our
patients in less time than we ever
have before. The Carriere® Motion™
appliance has been extremely effective
in addressing this need for our practice.
By initiating AP correction at the outset
of treatment, when compliance is at its
highest, we are able to provide excellent
orthodontic outcomes while at the same
time dramatically reducing the total time
spent in full fixed appliances. Being able
to deliver great results faster, allows us
to command a higher fee for treatment,
start more patients, and keeps smiles
healthy by reducing cariogenic strain to
the dentition.
Bilateral Class II malocclusion with deep
overbite. Mandibular retrusion due
to radiographically evident condylar
resorption. Reduced width of attached
gingiva in lower anterior. Excessive
buccal corridors & consonant smile arc.
Paranasal deficiency and deficient Lower
Esthetic Contour™.
TREATMENT PLAN
TREATMENT MECHANICS
Maxillary arch development was initiated
at the outset of treatment to address
the transverse deficiency and prevent
the development of a crossbite during
AP correction. A Transforce expander
was utilized for 2.5mo to achieve the
desired arch width. Following Transforce
removal, a Class II Motion appliance
and full lower braces were placed;
3/16 2oz elastics were started. At 6
weeks, elastics were increased to 1/4in
4oz upon inserting rectangular CuNiTi
archwires in the lower arch. At 12 weeks,
elastics were again increased to 1/4in
6oz and final archwires were inserted
in the lower. A class I platform was
achieved after 20 weeks with the motion
appliance and upper fixed appliances
were bonded to close spaces and
reduce remaining overjet. To hold the
AP correction, 1/4in 4oz elastics were
worn to bed as needed. During space
closure, reverse curve of spee mechanics
we used in the lower arch to reduce
overbite and treatment was completed
in 20 months, with only 13 months in
full fixed appliances. The lower arch was
advanced without detrimental changes
to lower gingival attachment.
1. Transforce for arch development
2. Bond lower braces and start Class II
Motion appliance
3. Transition to full fixed appliances
4. Detail, Finish, Retain
INITIAL
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
All trademarks or registered trademarks are owned by their respective companies.
FINAL
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17
Figure 18
Figure 19
Figure 20
13
Recommended Elastic Protocol
when working with the
Carriere® Motion™ Appliance
Carriere Motion
Class lll Appliance
Carriere Motion
Class ll Appliance
By Dr. Luis Carrière
The Carriere Motion Appliance is designed to move teeth in a consolidated way to help you achieve a correct bite. With the proper wearing of
rubber bands, this appliance will keep the patient from having to wear headgear or other bulky appliances later in the treatment.
The Carriere Motion Appliance is able to handle normal chewing of food and drink but, like all appliances, if proper care is not taken then the
appliance may become detached from the teeth.
Elastics Protocol for Class II Cases
Adult Patients With High-Bone Density
Standard Protocol
If there is no movement after three months following the standard
protocol in Class II, Division II, high-bone density patients, boost the
case by doing the following:
An elastic will run from upper arch to the lower 7. If the lower 7 is not
available, run the elastic from the upper arch to the lower 6.
• 1st Month: Force 1 elastics (6 oz, 1/4”)
• After 1st Month: Force 2 elastics (8 oz, 3/16”) thereafter
Motion Upper 3 to 6 with Tube on Lower 7*
Patient Right
Patient Left
Motion Upper 3 to 6 with Tube on Lower 6*
Patient Right
Unique Cases: Motion 3 to 6 with Tube on Lower 7
• 1st Month-Night: double up Force 1 and Force 2 elastics (6
oz, 1/4” & 8 oz, 3/16”)
• 1st Month-Day: single wear of Force 2 elastics (8 oz, 3/16”)
• 2nd Month and thereafter: revert to single wear of Force 2
elastics (8 oz, 3/16”) to finish
Patient Right
Patient Left
*Space should open up distal to the U2’s in the first follow-up appointment.
Blocked-Out Canine Standard Protocol
Due to blocked-out, high, or buccally-displaced cuspids.
Motion Upper 4 to 6 with Tube on Lower 7
• 1st Month: Force 1 elastics (6 oz, 1/4”)
• After 1st Month: Force 2 elastics (8 oz, 3/16”) thereafter
Patient Left
Two Elastics
Unique Cases: Motion 3 to 6 with Tube on Lower 6
• 1st Month: double up Force 2 elastics (8 oz, 3/16”) at night
• 2nd Month and thereafter: revert to single wear of Force 2
elastics (8 oz, 3/16”)
Patient Right
Two Elastics
Patient Left
Elastics Protocol for Class III Cases
• An elastic will run from the lower cuspid to upper molar.
Patient Right
Patient Left
Motion Upper 4 to 6 with Tube on Lower 6
• 1st Month and thereafter: Force 2 elastics (8 oz, 3/16”)
Patient Right
2/3 of deciduous canine’s root must be available.
• 1st and 2nd Months: 2 oz, 1/4”
• 3rd and 4th Months: 4 oz, 1/4”
• 5th and 6th Months: 4 oz, 1/4” OR 6 oz, 1/4” at doctor’s discretion
Motion From Deciduous Canine With Tube on Lower 7
Patient Left
Motion From Deciduous Canine With Tube on Lower 6
Patient Right
• Use 6 oz, 1/4” (Force 1) elastic throughout the treatment
Motion Lower 3 to 6 with Tube on Upper 6*
Patient Right
Patient Left
Mixed Dentition Protocol With Deciduous Canine
Patient Right
Standard Protocol
Patient Left
Patient Left
Motion Lower 3 to 6 with Tube on Upper 7*
Patient Right
Patient Left
“Shorty” Class III Cases Protocol
Elastic will run from 1st Lower Bicuspid to upper 1st or 2nd molar.
Motion Lower 4 to 6 with Tube on Upper 6
• Use 8 oz, 3/16” (Force 2) elastic throughout the treatment
Patient Right
Patient Left
Motion Lower 4 to 6 with Tube on Upper 7
• Use 6 oz, 1/4” (Force 1) elastic throughout the treatment
Patient Right
Patient Left
© 2015 Ortho Organizers, Inc. All rights reserved. PN 999-325INT 06/15 U.S. Patent Nos. 7,618,257, 6,976,839, 7,238,022, and 7,985,070 B2. Foreign Patent Nos. 2,547,433, 1723927, and 2006202089.
14
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
CARRIERE MOTION CLASS II APPLIANCE
®
™
A Comparison with Forsus
™
Motion Appliance
Forsus Fatigue Resistant
Device EZ2 Module
Class II
Yes
Yes
Number of
Components Needed
per Patient Case
Two: one right and one left per patient
Many components: springs, right and left modules,
left push rod, right push rod, and universal split crimps
Band Requirements
No bands required when using a clear plastic
aligner or TAD as source of anchorage.
Molar bands required
Any buccal tube can be used. When using a plastic aligner,
a direct bond buccal tube can be used with the lower lingual arch
option. Any direct bond buccal tube or direct bond button can be used
when using the plastic aligner as anchorage.
Doctor must select an occlusal headgear tube.
Fatigue Failure
No built-in mechanism that can fatigue.
Appliance is made of a built-in mechanism, composed of
many small parts, that can fatigue or break over time.
Archwire
Requirements
None, as appliance is used prior to brackets and wires.
Requires .017" x .025" or .019" x .025" archwire,
depending on slot size.
Method of Archwire
Attachment
Not applicable
Wraps loosely around the archwire and is braced by the cuspid
bracket, providing risk of debonding the cuspid bracket.
Patient Comfort:
Mandibular Movement
Allows full lateral, mandibular movement.
No changes are needed when patient eats.
Sufficient lateral, mandibular movement. If patient opens his/her
mouth too widely, it may separate or loosen a molar band.
Patient Comfort:
Tissue Interaction
Extremely comfortable: Appliance is very
smooth and extremely low profile.
The large, exposed coil spring can chafe the cheek and gather debris.
Springs may also be compressed creating some trauma.
Aesthetic Aspect
on Patient
Appliance is barely noticeable once in place,
making it highly accepted.
Bulky, making it visible on the patient when smiling or talking.
Hygiene
Food does not get trapped and the patient is still able to brush and
floss normally with the appliance bonded.
Food gets trapped in the open coil strong assembly design requiring
the patient to take necessary steps to clean out the appliance.
Activation and
Reactivation
Only Class II elastics needed for activation.
Reactivation is required to maintain force levels
and facilitate continued advancement.
Staff Training
Required
Orthodontic staff can be quickly trained
on placement of the appliance.
System requires extensive, detailed training;
a course is recommended.
Patient Compliance
Extremely high, because the appliance is used before bracketing,
when patients are eager to start their treatment.
Not required
Appliance Requirement
Can be used in cases that will be treated with a fixed appliance or
clear aligner system – no limitations.
Can only be used for patients treated with fixed appliances.
Overall Treatment Time
Reduces overall treatment time by 3 to 6 months.
Does not affect the overall treatment time.
Clinical Efficiency 1
At the beginning of treatment, appliance transforms a Class II
case into a Class I case making the overall case easier to treat.
Some efficiency due to the lack of patient compliance.
Clinical Efficiency 2
If needed, rotation and uprighting of the maxillary 1st molars occur
automatically until they reach the correct position, without requiring
intervention. Built-in stop prevents over rotation and over-uprighting.
If rotation of the molars are needed,
other mechanics need to be performed.
Installation Time
6-7 minutes*
12-15 minutes*
Removal Time
2-3 minutes*
4-5 minutes*
Profile
Buccal Tube
Requirements
© 2015 Ortho Organizers, Inc. All rights reserved. Trademarks and registered trademarks are owned by
their respective company(s). U.S. Patent No. 7,621,743 and foreign patent numbers 2,547,433, 1723927,
and 2006202089.
* Time based on average clinical experience. Time may vary per clinician.
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
15
CARRIERE® MOTION™ CLASS III APPLIANCE
The Motion Class III Appliance is a minimally invasive appliance intended to treat Class III
malocclusions without extractions, painful orthognathic surgery, or traditionally uncomfortable
and obtrusive facemasks. The Motion Class III Appliance is as easy to place as a bracket or buccal
tube, and is designed to provide predictable results and create a harmonious, balanced profile,
all while preserving the patient’s natural features. The patient-friendly appliance is used at the
beginning of treatment, prior to braces or aligners, and delivers rapid Anterior-Posterior correction
to help reduce overall treatment times by several months. Intra-oral elastics connect the appliance
with maxillary anchorage to activate the mandibular posterior segment and to move it bodily as a
block for an ideal Class I malocclusion. Once the ideal platform is achieved, brackets or aligners
are then placed to finish the case.
Designed to provide predictable results
and create a harmonious, balanced profile.
KITS
ITEM NUMBER
Motion Class III Standard Kit (1 set of each 23, 25, 27 mm)
424-407C
DESCRIPTION/SIZE
COLOUR-CODE
ITEM NUMBERS
1 pair
ITEM NUMBERS
SINGLE (UNIVERSAL L/R)
Motion Class III 16 mm
White
424-416C
424-416
Motion Class III 18 mm
Blue
424-418C
424-418
Motion Class III 20 mm
Pink
424-420C
424-420
Motion Class III 23 mm
Yellow
424-423C
424-423
Motion Class III 25 mm
Red
424-425C
424-425
Motion Class III 27 mm
Green
424-427C
424-427
Typodont Motion Class III with Clear Aligner
–
–
631-033DNE
Typodont Motion Class III Maloccluded with Clear Aligner
–
–
631-034DNE
Motion Class III 5X Demonstration model
–
–
631-433X
Motion Elastics - Force 1, 1/4”, 6 oz (50 packs of 100 elastics)
–
–
424-9F1
Motion Elastics - Force 2, 3/16”, 8 oz (50 packs of 100 elastics)
–
–
424-9F2
ACCESSORIES
© 2015 Ortho Organizers, Inc. All rights reserved. PN M805 05/15 U.S. Patent 7,985,070 B2
16
Pre-Treatment
In Treatment
Post-Treatment
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
ADHESIVES/CEMENTS
Everest™ Light-Cure Orthodontic Adhesive
Everest No-Mix Orthodontic Adhesive
(Primer Activated) Bonding System
Everest™ Light-Cure Kit in Syringes - 490-300
Kit Includes:
• 4 Push Syringes (3 .5 grams ea .)
• 1 Gel Etch Syringe (4 grams)
• 1 Sealant Resin (7 ml)
• 5 Syringe Tips (22-Gauge)
• 2 Mixing Wells (10-Cavity)
• 1 Mixing Pad
• 50 Brushes
• 1 Instruction For Use Sheet
Everest No-Mix Orthodontic Adhesive Kit in Syringes
(Primer-Activated) - 490-340
Kit Includes:
• 4 Push Syringes (3.5 grams ea.)
• 1 Enamel Catalyst Primer (9 ml)
• 1 Gel Etchant Syringe (4 grams)
• 5 Syringe Tips (22-Gauge)
• 2 Mixing Wells (10-Cavity)
• 1 Mixing Pad
• 50 Brushes
• 1 Instruction For Use Sheet
Everest Light-Cure Kit in Capsules - 490-320
Kit Includes:
• 40 Capsules (.35 grams each)
• 1 Sealant Resin (7 ml)
• 1 Green Liquid Etchant (9 grams)
• 1 Mixing Pad
• 50 Brushes
• 1 Instruction For Use Sheet
Everest No-Mix Orthodontic Adhesive Mini Kit in Syringe
(Primer-Activated) - 490-350
Kit Includes:
• 1 Push Syringe (3.5 grams)
• 1 Enamel Catalyst Primer (3 ml)
• 1 Gel Etchant Syringe (4 grams)
• 5 Syringe Tips (22-Gauge)
• 5 Bonding Brushes
• 1 Instruction For Use Sheet
Everest Dispensing Gun - 490-220
1 Capsule Gun
Everest Light-Cure Mini Kit - 490-310
Kit Includes:
• 1 Push Syringe (3.5 grams)
• 1 Sealant Resin (3 ml)
• 1 Green Gel Etchant
Syringe (4 grams)
• 5 Syringe Tips (22-Gauge)
• 5 Bonding Brushes
• 1 Instruction For Use Sheet
Everest Powder/Liquid Band Cement
Everest Glass Ionomer Cement Economy Kit - 490-380
Kit Includes:
• 1 Powder (100 grams)
• 2 Liquid (50 grams ea.)
• 1 Mixing Pad
• 1 Measuring Scoop
• 1 Instruction For Use Sheet
Everest Etchant Bonding Supplies
Everest Gel Etch Kit, Economy Size - 490-360
Kit Includes:
• 4 Syringes (4 grams ea.)
• 20 Plastic Flowthru Tips (22-Gauge)
Everest Gel Etch Mini Kit - 490-370
Kit Includes:
• 1 Syringe (4 grams)
• 5 Plastic Flowthru Tips (22-Gauge)
Everest Light-Cure Band Cement
Everest Light-Cure Orthodontic
Band Cement Kit - 490-390
Kit Includes:
• 6 Push Syringes (5 grams ea.)
Everest Glass Ionomer Cement Starter Kit - 490-385
Kit Includes:
• 1 Powder (50 grams)
• 1 Liquid (50 grams)
• 1 Mixing Pad
• 1 Measuring Scoop
• 1 Instruction For Use Sheet
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
17
GAME CHANGER
New Carriere®
SLX™ Bracket
®
™
Your Peers are Raving About the New Carriere SLX Bracket!
• Low profile design for
patient comfort and less
occlusal interference
• Adhesive Guard Rail
(AGR) Technology
directs adhesive MD for
faster, easier cleanup
• Deep under tie-wings for
secure chain and ligature use
• Reduced slot depth for more
precise tooth control
• Smooth, secure, and easy to operate
slides with audible and tactile cues
• Tooth-specific bracket widths
provide exceptional rotational control
• External clasp and spring with easy
access for brushing ensure reliable
functionality
• Numerous vertical and horizontal
cues for fast, accurate placement
• Occlusal opening, uppers and lowers,
to avoid gingival impingement
• Fully-integrated hooks eliminate
the need for drop-in auxiliaries
Most Frequently Used Carriere System Wire Sequence
Arch Form
D-LX™ Shape Archwires are great for use with the Carriere Self-Ligating Bracket System.
Packaged
10/Single Pack Pouches
Phase 1
(10-20 weeks)
Initiate tooth movement; begin aligning and leveling teeth; begin correcting rotations; start maxillary
transverse arch development.
1st Wire
103-191ST .013 CuTM Nitanium® 27°C with Stops Archwires (Severe Crowding)
103-192ST .014 CuTM Nitanium® 27°C with Stops Archwires (Moderate Crowding)
Phase 2
(20-30 weeks)
Finish aligning/leveling; resolve remaining major rotational issues; begin torque control and space
consolidation in the anterior; correct angulations; continue arch development.
2nd Wire
103-195ST .014 x .025 CuTM Nitanium® 27°C with Stops Archwires (Place in well-prepared arches.)
3rd Wire
103-200ST .017 x .025 CuTM Nitanium® 35°C with Stops Archwires (To express additional torque & prepare for CNA Archwires.)
4th Wire
103-201ST .019 x .025 CuTM Nitanium® 35°C with Stops Archwires (To express additional torque & prepare for CNA Archwires.)
Phase 3
(10 weeks)
Begin major mechanics to correct A/P; Make most final torque adjustments; consolidate space closure in
posterior; adjust buccal/lingual discrepancies; establish patient-specific arch form.
5th Wire
103-120
Phase 4
(2 weeks)
Correct final minor rotations that are sometimes required when employing self-ligating bracket systems.
6th Wire
103-123
.019 x .025 CNATM Beta III Archwires
.021 x .027 Bio-Kinetix® Thermally Activated Nitanium® Archwires
All trademarks or registered trademarks are owned by their respective companies.
© 2015 Ortho Organizers, Inc. All rights reserved.
18
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
®
The colour SLX Bracket System Beats Damon Q
with 10 Essential Enhancements
®
Features
1.
Slot Depth
2.
Bracket
Widths
™
Damon Q
.033”*
Carriere SLX
.028”*
All the same width
(.110)
Very few
Wide teeth, wide
brackets; narrow
teeth, narrow
brackets
5 vertical and
6 horizontal
references
Performance Rationale/Objectives
Reduced “play” in the slot of SLX Brackets
improves first order control, as well as torque
and rotational control, for more precise tooth
positioning and faster, better finishes
Tooth-specific bracket sizes improve rotational
control, reducing the need for wire adjustments,
and thus faster and better finishes
Visual cues improve bracket-to-tooth visualization
for more accurate bracket placement and less
need for rebonds and wire bends
3.
Visual Cues
4.
Profile
Height
Tall profile
Low profile
Reduced profile height means less tooth-tobracket impingement, and improved patient
comfort
5.
Direction
of Door
Opening/
Closing
Uppers towards
the incisal edges,
lowers towards the
gingival
All open towards
the incisal edge/
occlusal plane
Doors on the lower arch open to the occlusal
for easier access and less gingival impingement,
particularly on the lower posteriors
6.
Slide
Mechanism
Internal spring
External C type
Sure-Lok ™ Clip allows easy access for brushing
and thus smooth, reliable opening/closing, with
less likelihood of calcification and binding
Tie-Wings
Non-functional
Ample space and
shape for elastic or
metal ties
Fully-functional tie-wings allow for friction on
demand and/or patient colour preferences
8.
Hooks
Expensive,
cumbersome
drop-in hooks
Traditional fullyintegrated hooks
Fully-integrated hooks are far less expensive and
can’t be dropped or lost
9.
Bonding
Base
Standard mesh
Adhesive Guard
Rail TM Technology
Adhesive Guard Rails channel adhesive to sides
for faster, easier clean up
10.
Wire
Sequence
T.M.A.
New C.N.A. TM
Technology
New & physiologically friendly Carriere system
archwire sequence to increase efficiency and
reduce discomfort
7.
TM
*Upper Central Brackets
All trademarks or registered trademarks are owned by their respective companies.
“ADVANCING THE FUTURE OF ORTHODONTICS”
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
19
Self Ligating
Bracket System
Introducing the
All-New Carriere® SLX™ Bracket
System Prescriptions
Roth Prescription®
ITEM NUMBERS
.018 L
.022 R
MAXILLARY
DESCRIPTION
COLOUR-CODE
TOOTH#
TORQUE
ANG
ANTI-ROTATION
Centrals
-
Black
U1
+12O
+5O
0O
713-207
713-208
713-307
713-308
Laterals
-
Pink
U2
+8O
+9O
0O
713-223
713-224
713-323
713-324
-
Green
U3
-2O
+9O
4OM
713-251
713-252
713-351
713-352
Hook
Green
U3
-2O
+9O
4OM
713-251HK
713-252HK
713-351HK
713-352HK
713-260
713-359
Cuspids
.018 R
-
Purple
U4 & 5’s
-7O
0O
2OD
713-259
Hook
Purple
U4 & 5’s
-7O
0O
2OD
713-259HK
MANDIBULAR
DESCRIPTION
COLOUR-CODE
TOOTH#
TORQUE
ANG
ANTI-ROTATION
Anteriors
-
Yellow
L1 & 2’s
-1O
0O
0O
Bicuspids
Cuspids
1st Bicuspids
2nd Bicuspids
.018 R
.022 L
713-360
713-260HK
713-359HK
ITEM NUMBERS
.018 L
.022 R
713-235
713-235
713-360HK
.022 L
713-335
713-335
-
Blue
L3
-11O
+5O
2OM
713-267
713-268
713-367
713-368
Hook
Blue
L3
-11O
+5O
2OM
713-267HK
713-268HK
713-367HK
713-368HK
-
White
L4
-17O
+2O
4OD
713-289
713-290
713-389
713-390
Hook
White
L4
-17O
+2O
4OD
713-289HK
713-290HK
713-389HK
713-390HK
-
Red
L5
-22O
+2O
4OD
713-293
713-294
713-393
713-394
Hook
Red
L5
-22O
+2O
4OD
713-293HK
713-294HK
713-393HK
713-394HK
McLaughlin, Bennett and Trevisi Prescriptions®
ITEM NUMBERS
MAXILLARY
DESCRIPTION
COLOUR-CODE
TOOTH#
TORQUE
ANG
ANTI-ROTATION
Centrals
-
Black
U1
+17O
+4O
0O
Laterals
-
Pink
U2
+10O
+8O
0O
713-327
713-328
-
Green
U3
-7O
+9O
0O
713-353
713-354
713-354HK
Cuspids
.022 R
.022 L
713-309
713-310
Hook
Green
U3
-7O
+9O
0O
713-353HK
-
Purple
U4 & 5’s
-7O
0O
0O
713-357
713-358
Hook
Purple
U4 & 5’s
-7O
0O
0O
713-357HK
713-358HK
MANDIBULAR
DESCRIPTION
COLOUR-CODE
TOOTH#
TORQUE
ANG
ANTI-ROTATION
Anteriors
-
Yellow
L1 & 2’s
-6O
0O
0O
Bicuspids
Cuspids
1st Bicuspids
2nd Bicuspids
ITEM NUMBERS
Centrals
Laterals
Cuspids
Bicuspids
MANDIBULAR
Anteriors
Cuspids
1st Bicuspids
2nd Bicuspids
.022 L
713-337
713-337
-
Blue
L3
-6O
+4O
0O
713-371
713-372
Hook
Blue
L3
-6O
+4O
0O
713-371HK
713-372HK
-
Gray
L4
-12O
2O
0O
713-387
713-388
Hook
Gray
L4
-12O
2O
0O
713-387HK
713-388HK
-
White
L5
-17O
2O
0O
713-391
713-392
Hook
White
L5
-17O
2O
0O
713-391HK
713-392HK
VariableTorque Prescription®
MAXILLARY
.022 R
ANTIROTATION
0O
ITEM NUMBERS
.022 R
.022 L
713-305
713-306
DESCRIPTION
COLOUR-CODE
TOOTH#
VARIABLE
TORQUE
ANG
-
Black
U1
SUPER
+22O
+5O
-
Black
U1
HIGH & STD Q
+17O
+4O
0O
713-309
-
Black
U1
STANDARD
+12O
+5O
0O
713-307
713-308
-
Black
U1
LOW
+7O
+5O
0O
713-312*
-
Pink
Pink
U2
U2
SUPER
HIGH
+14O
+10O
+9O
+8O
0O
0O
713-311*
713-319
-
Pink
U2
STANDARD & STD Q
+8O
+9O
0O
713-323
713-324
-
Pink
U2
LOW
+3O
+9O
0O
713-329*
713-330*
Green
U3
HIGH & STD Q
+7O
+8O
0O
713-349
713-350
Hook
Green
U3
HIGH & STD Q
+7O
+8O
0O
713-349HK
713-350HK
713-327
713-310
713-320
713-328
-
Green
U3
STANDARD
0O
+6O
0O
713-355
713-356
Hook
-
Green
U3
STANDARD
0O
+6O
0O
713-355HK
713-356HK
Green
U3
LOW
-7O
+9O
0O
713-353
713-354
Hook
-
Green
U3
LOW
-7O
+9O
0O
713-353HK
713-354HK
Purple
U4&5's
-
-7O
2O
0O
713-357
713-358
Hook
Purple
U4&5's
-
-7O
0O
DESCRIPTION
COLOUR-CODE
TOOTH#
-
Yellow
L1&L2's
SUPER
+3O
0O
-
Yellow
L1&L2's
HIGH & STD Q & STD
-1O
0O
0O
713-335
713-335
-
Yellow
L1&L2's
LOW
-6O
0O
0O
713-337
713-337
-
Blue
L3
HIGH & STD Q
+7O
+4O
0O
713-363
713-364
Hook
Blue
L3
HIGH & STD Q
+7O
+4O
0O
713-363HK
713-364HK
VARIABLE
TORQUE
ANG
0O
ANTI
ROTATION
0O
713-357HK
713-358HK
ITEM NUMBERS
.022 R
.022 R
713-333
713-333
-
Blue
L3
STANDARD & LOW
0O
+5O
0O
713-373
713-374
Hook
Blue
L3
STANDARD & LOW
0O
+5O
0O
713-373HK
713-374HK
-
Gray
L3
-
-12O
+2O
0O
713-387
713-388
Hook
Gray
L4
-
-12O
+2O
0O
713-387HK
713-388HK
-
White
L5
-
-17O
+2O
0O
713-391
713-392
Hook
White
L5
-
-17O
+2O
0O
713-391HK
713-392HK
© 2015 Ortho Organizers, Inc. All rights reserved. PN 999-286 09/14. *Ortho Organizers prescription does not imply endorsement by the doctor(s). Trademarks and registered
trademarks are owned by their respective company(s). U.S. Patent No. 7,621,743 and foreign patent numbers 2,547,433, 1723927, and 2006202089.
20
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
NeoMaestro™
Premium Bracket System
A Family of Brackets that All Work in Unison.
COMPATIBLE IN/OUT
COMPARABLE BRACKET SIZES & THREE
BRACKET MATERIAL OPTIONS
Maestro ® Bracket
Premium Stainless Steel
NeoLucent ® Plus™ Bracket
Polycrystalline
EQUIVALENT BOND STRENGTH
NeoCrystal ™ Bracket
Monocrystalline
Maestro Bracket
SAME BRACKET BASE
COMPOUND/CONTOURS
SEM Picture
NeoLucent Plus Bracket
NeoCrystal Bracket
Maestro Bracket
NeoLucent Plus Bracket
NeoCrystal Bracket
SEM Picture
CONSISTENT PRESCRIPTIONS
CENTRALS
LATERALS
CUSPIDS
2ND BICUSPIDS
1ST BICUSPIDS
TRQ.
ANG.
ANTIROT.
TRQ.
ANG.
ANTIROT.
TRQ.
ANG.
ANTIROT.
TRQ.
ANG.
ANTIROT.
TRQ.
ANG.
ANTIROT.
McLaughlin, Bennett,
and Trevisi
+17°
+4°
0°
+10°
+8°
0°
-7°
+8°
0°
-7°
0°
0°
-7°
0°
0°
McLaughlin, Bennett,
and Trevisi
(0 torque on 3’s)
+17°
+4°
0°
+10°
+8°
0°
0°
+8°
0°
-7°
0°
0°
-7°
0°
0°
Roth
+12°
+5°
0°
+8°
+9°
0°
-2°
+13°
4°M
-7°
0°
2°D
-7°
0°
2°D
McLaughlin, Bennett,
and Trevisi
-6°
0°
0°
-6°
0°
0°
-6°
+3°
0°
-12°
2°
0°
-17°
2°
0°
McLaughlin, Bennett,
and Trevisi
(0 torque on 3’s)
-6°
0°
0°
-6°
0°
0°
0°
+3°
0°
-12°
2°
0°
-17°
2°
0°
Roth
-1°
0°
0°
-1°
0°
0°
-11°
+7°
2°M
-17°
0°
4°D
-22°
0°
4°D
MAXILLARY
MANDIBULAR
© 2015 Ortho Organizers, Inc. All rights reserved. *Ortho Organizers' prescription does not imply endorsement by the doctor(s).
Bracket images are not representative of actual size, or ratio to other brackets.
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
21
Metal / Ceramic
bracket systems
Discover the Precision, Comfort, and Control of the
MIM-Manufactured Maestro® Bracket System
Lowest possible
profile
reduces occlusal
interferences
Smooth rounded
surfaces
ensure patient
comfort
Small footprint is less bulky than conventional
twin brackets, minimizing the look and feel
Contoured archwire slot edges
mesial-distal to reduce friction
Finely Tuned Design
for Detailed Finishes
In/Outs Built-In, Not Machined
for precision and consistency
Anatomically
contoured
base and pad
The Maestro® Bracket Offers Multiple Visual
Cues to Enhance Precise Bracket Placement
The geometries of the Maestro Bracket are specifically designed to provide signposts
which assist you in positioning brackets in their ideal location.
Rhomboid-shaped
brackets and pads
Constant occlusalgingival heights across
align with tooth edges
the system foster placement
repeatability
Vertical aspects
follow long axis
of the tooth
Horizontal aspects run
parallel to occlusal plane
Long axis scribe line
Specific bracket
geometries, such as
not only runs the entire
length of the pad, but
also the bracket for an
accurate placement cue
in this lower lateral
bracket, further
guide the eye for
placement accuracy
Maestro® A Complete System
Maestro Buccal Tubes – bondable
Maestro Buccal Tubes complete the appliance system. and weldable – are engineered to
provide a complete and seamless
The 80 gauge mesh pad, compound contoured base,
appliance system
and defined buccal indent, provides the practitioner
with the precise control needed throughout all phases
Funneled slot
of treatment. The large funneled entrance, side-grip
opening
areas, and colour-coding make for easier identification,
makes wire
placement, positioning, plus wire insertion. The patient
engagement
will have one of the most comfortable experiences with
easier without
its smooth shape, low profile, rounded edges, and
adding bulk
lowered hook. The Maestro Buccal Tube orchestrates
all components of the system seamlessly, providing
reduced chair time and increased satisfaction for both
practitioner and patient.
Deep tie-wing
undercuts
Optional
gingivally
offset brackets,
on large
bonding bases
80 gauge
micro-etched
bondable
mesh pad
Torque-in-base
Optimized
mesial-distal
width
©2015 Ortho Organizers, Inc. All rights reserved.
22
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
NeoLucent® Plus™
Ceramic Bracket System
The NeoLucent Plus Low-Profile Ceramic Bracket System delivers superb aesthetics by blending with
the natural tooth tone for a virtually invisible appearance. With improved performance due to a Crunch
Coat Base, more anatomically contoured base radii, and improved materials for a smoother finish and
colour consistency, NeoLucent Plus Ceramic Brackets provide the definitive performance you demand.
Patient Satisfaction
Clinical Performance
Invisible Appearance –
Crafted to the highest
aesthetic standards
Accurate placement
achieved with an easily
removable colour-coded
ID mark
Translucent, natural
appearance from 99.9%
pure Polycrystalline
Alumina
Strong bonding and
predictable debonding with
a Crunch Coat™ Base
Stain resistant
throughout treatment
Superior Sliding
Mechanics via a precisioncut archwire slot
Comfort – Designed
with your patient’s
comfort in mind
Non-allergenic for sensitive
patients as brackets do not
contain nickel, chromium or
other metals
Low profile
Smooth, polished
surface
Easy Ligation with ample
tie wing clearance
Rounded corner
Routine Protocol with no
special instruments or
adhesives required
Single Hook
More Comfort for the Patient
Sapphire Ceramic Bracket System
The “Crystal” Clear Advantage
Manufactured from pure monocrystalline material, the NeoCrystal Sapphire Ceramic Bracket is the clear
aesthetic choice for your practice. NeoCrystal Brackets are developed from a single crystal sapphire, one
of the hardest and clearest materials found in nature. Once machined out of the crystal, the brackets are
then annealed for strength and heat polished to perfect any microscopic flaws. The result is an unmatched
aesthetic bracket that allows the natural tooth tone to show through, regardless of shade, for a virtually
invisible appearance. Featuring Ortho Organizers® proprietary Crunch COAT™ Base and anatomically
contoured base radii, the NeoCrystal Bracket provides the exceptional performance you demand.
Unmatched Aesthetics
Enhanced Performance
• Pure monocrystalline
material for a transparent,
natural appearance
• Heat treated for increased
strength
• Stain resistant
throughout treatment
• Reduced friction offers
sliding mechanics comparable
to metal brackets
Designed for
Patient Comfort
• Non-allergenic for sensitive
patients
• Heat polished for a
remarkably smooth
surface
• Anatomically contoured base
for quick and easy bracket
placement
• Low profile
• Removable colour-code
ID mark to ensure accurate
placement
• Rounded corners
©2015 Ortho Organizers, Inc. All rights reserved.
Aesthetic Archwire Options
Tooth Tone
Plastic-Coated
Archwires
Stain and crack resistant this archwire
features a tooth-coloured coating that
blends with natural dentition and reduces
friction. (Available in Niti and S.S.)
White Micro-Coated
Bio-Kinetix®
Thermally Activated
Nitanium® Archwires
The labial side of the wire is coated in
bright white to enhance aesthetics,
without affecting wire dimensions.
Pearl Tone®
Preformed
Ligature Wires
Available in a white/pearl hue, this
archwire features a super smooth
nonstick coating.
Aesthetic Elastomeric Options
Ligatures
NeoCrystal™
• Single hook offers a less
bulky feel than universal hooks
Finishing Touches
Ligatures for individual patient use,
avoiding cross-contamination. We offer an
array of colour options that blend with the
bracket and dentition. Available in clear,
white, tooth tone, natural glow and smoke.
Chain Elastic
Made from super-elastic long lasting
material, these ligatures deliver gentle,
continuous force for more predictable
tooth movement. Multiple colours to
choose from: clear, white, tooth tone,
natural glow and smoke.
Light Force
Chain Elastic
Delivers a 20% lighter force than our
regular chain making it an excellent
choice for low force treatment mechanics.
Available in clear.
Debonding Pliers Options
Triumph® Debonding Pliers
205-219
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
Triumph® Angulated
Debonging Piliers
205-220XL
23
Specialty Appliances
Twin Force® Bite Corrector
Device, Double Lock
A comparison with Forsus™
Twin Force Bite Corrector
Device, Double Lock
Forsus Fatigue Resistant
Device EZ2 Module
Class II Usage
Yes
Yes
Class III Usage
Simply reverse from upper cuspid to lower molar
Not specifically designed for Class III. This adaptation
requires a lip bumper tube on lower first molar
Inventory
Requirements
Minimum: Two self-contained Twin Force Springs, small
and standard. Appliance is bi-directional, so there is no
confusion about which goes on the left or right, or which end
attaches
in the molar region or cuspid region
Many components: Left spring assembly, right
spring assembly, left push rod, right push rod,
and universal split crimps
Sizes
Two
Six
Placement
Procedures
Two Steps:
1. Measure and choose size
2. Clamp and tighten to wire
Appliance must be assembled in
the mouth using several steps
Band Requirements
No molar bands required, allowing direct bond of molars
Molar bands required
Buccal Tube
Requirements
No special buccal tube required.
Doctor can use their preferred buccal tubes
Doctor must select an occlusal or gingival
headgear tubes
Activation and
Reactivation
There is no need to activate or reactivate the appliance. Dual
cylinders containing nickel titanium coil springs provide over
400 g of continuous force for 1-2 mm of movement per month
Reactivation is required to maintain force levels
and facilitate continued advancement.
Archwire
Requirements
Requires .019” x .025” stainless steel archwire as a minimum size
when using .022” slot brackets and .017” x .025” stainless steel
archwire when using .018” slot brackets, with cinch-back wire bends
Requires .017” x .025” or .019” x .025” archwire,
depending on slot size, with cinch-back wire bends
Method of Archwire
Attachment
Twin Force Devices fit firmly onto the archwire without removal
of the wire and lock into place. They do not slide on the wire and
will not debond any brackets
Wraps loosely around the wire and is braced by the
cuspid bracket, which may cause
the cuspid bracket to debond
Patient Comfort:
Mandibular Movement
Maximum lateral, mandibular movement
Sufficient lateral, mandibular movement
Patient Comfort:
Tissue Interaction
There are no exposed springs to puff and chafe
the cheek or gather debris
The large, exposed coil spring can chafe the cheek
and gather debris
Lab Requirements
No lab work required
No lab work required
Staff Training
Required
Your staff can be quickly trained over lunch
on placement of the appliance
System requires extensive, detailed training;
a course is recommended
Ligation and
Anchorage
Chain elastics and figure 8 ties are sufficient
Chain elastics and figure 8 ties are sufficient
Installation Time
6-7 minutes*
12-15 minutes*
Removal Time
2-3 minutes*
4-5 minutes*
Profile
* Time based on average clinical experience. Time may vary per clinician.
24
Trademarks are owned by their respective companies.
© 2015 Ortho Organizers, Inc. All rights reserved.
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
Nitanium® Palatal Expander2™
Multi-Purpose Appliance
Nitanium Palatal Expander 2
Appliance Case Study 1
Efficient Molar Rotation (3.5 Month Progress)
Key Features
Automatic Midline Correction (4 Month Progress)
• Slower expansion, which allows the suture to
reposition and regenerate, has been shown to lower
incidents of relapse*
• Addresses the sagittal, lateral, and
vertical relationships
• Thermally-activated Nitanium for total control
eliminating patient compliance, and creating better
patient acceptance
• May be used with mixed and early dentition
• Ease of placement and removal by the doctor
• Ortholoy arms and loops provide adjustability for
fine-tuning and finishing
• No laboratory work is required – available in 10 sizes
Nitanium Palatal Expander 2
Appliance Case Study 2
5 Month Progress: (February - June)
Indication
• Molar, premolar, and cuspid expander
• Molar rotator
• Molar distalization
• Constrictor
• Anti-thumb
• Molar intruder
• Retainer
• Anchorage
• Control the vertical growth of the molars
• Control the vertical dimension
• Molar constriction
© 2015 Ortho Organizers, Inc. All rights reserved.
Images provided by Dr. Massimo Lupoli.
• Bite-opening
Ask for Your Free Copy of these Articles on the Nitanium Palatal Expander 2 Appliance: “Slow Maxillary Expansion with Nickel Titanium” By Drs. Ravi Nanda and Robert Marzban • 999-162
*“Slow and Continuous Maxillary Expansion, Molar Rotation and Molar Distalization” By Dr. Maurice Corbett • 999-151
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
25
Smart Archwires
Cu Nitanium
™
®
Copper Nitanium Archwires
Copper. A Natural Transition.
Copper allows › Superior flexibility for easier placement
› Higher resistance to deformation
› Smooth and continuous loading and unloading
Cu Nitanium Archwires are truly comparable to Ormco®’s Copper Ni-Ti™ Archwires* and refined using the
most advanced technology for greater treatment predictability and control. The unique thermal properties
of copper enhance the Nitanium Archwires for a precise control of forces, while maintaining excellent
flexibility. Made of the highest quality materials, Cu Nitanium Archwires provide fast, natural, and
reliable results for optimal patient outcomes.
Available in two archwire series options to fit your treatment needs:
Cu Nitanium 27°C Archwires – This wire series provides optimal nickel titanium force levels with the
additional flexibility required for easy placement in crowded cases and comfortable tooth movement.
Cu Nitanium 35°C Archwires – This wire series is activated at body temperature to facilitate easy
engagement, consistent forces, and efficient tooth movement using transitional temperature changes
back and forth between the “soft” martensite state and “firm” austenite state.
Nitanium
Archwires
Pro Form
Arch Shape
Pro Form
Arch Shape
Pro Form
Arch Shape
with Dimple
Oval Arch
Form III Shape
Oval Arch
Form III Shape
with Dimple
Cu Nitanium
27ºC Archwires
10/single-pack
pouches
10/pack
10/pack
10/pack
10/pack
.013
—
.014 Upper
109-542
.014 Lower
109-543
.016 Upper
109-544
.016 Lower
109-545
.018 Upper
109-546
.018 Lower
109-547
.014 x .025 Upper
109-548
.014 x .025 Lower
109-549
.016 x .022 Upper
109-550
.016 x .022 Lower
109-551
.016 x .025 Upper
109-552
.016 x .025 Lower
109-553
.017 x .025 Upper
109-554
.017 x .025 Lower
109-555
.018 x .025 DLX
—
.019 x .025 Upper
109-558
.019 x .025 Lower
109-559
Cu Nitanium 35°C Archwires
.016 Upper
109-562
.016 Lower
109-563
.018 Upper
109-564
.018 Lower
109-565
.016 x .022 Upper
109-568
.016 x .022 Lower
109-569
.017 x .017 Upper
109-570
.017 x .017 Lower
109-571
.017 x .025 Upper
109-572
.017 x .025 Lower
109-573
.018 x .025 Upper
109-574
.018 x .025 Lower
109-575
.019 x .025 Upper
109-576
.019 x .025 Lower
109-577
.020 x .020 Upper
109-578
.020 x .020 Lower
109-579
—
109-142
109-143
109-144
109-145
109-146
109-147
109-148
109-149
109-150
109-151
109-152
109-153
109-154
109-155
—
109-158
109-159
—
109-242
109-243
109-244
109-245
109-246
109-247
109-248
109-249
109-250
109-251
109-252
109-253
—
—
—
—
—
109-342
109-343
109-344
109-345
109-346
109-347
109-348
109-349
109-350
109-351
109-352
109-353
109-354
109-355
—
109-358
109-359
—
109-442
109-443
109-444
109-445
109-446
109-447
109-448
109-449
109-450
109-451
109-452
109-453
—
—
—
—
—
109-162
109-163
109-164
109-165
109-168
109-169
109-170
109-171
109-172
109-173
109-174
109-175
109-176
109-177
109-178
109-179
109-262
109-263
109-264
109-265
109-268
109-269
109-270
109-271
109-272
109-273
109-274
109-275
109-276
109-277
109-278
109-279
109-362
109-363
109-364
109-365
109-368
109-369
109-370
109-371
109-372
109-373
109-374
109-375
109-376
109-377
109-378
109-379
109-462
109-463
109-464
109-465
109-468
109-469
109-470
109-471
109-472
109-473
109-474
109-475
109-476
109-477
109-478
109-479
D-LX™ Shape
D-LX™ Shape
Universal
Universal w/Stops
(Damon Shape)
(Damon Shape)
10/single-pack
10/single-pack
pouches
pouches
103-191
103-191ST
103-192
103-192ST
103-193
103-193ST
103-194
103-194ST
103-195
103-195ST
—
—
—
—
103-196
103-196ST
103-197
103-197ST
103-198
103-198ST
103-199
103-199ST
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
103-200
103-200ST
—
—
—
—
103-201
103-201ST
—
—
—
—
* Data on file. Ormco is a registered trademark of Ormco Corporation. Trademarks are owned by their Respective Companies. ©2015 Ortho Organizers, Inc. All rights reserved.
26
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
*FREE! with
order of 20
packs of wires
GENTLE FORCES
MODERATE FORCES
HEAVY FORCES
*Covered Archwire Rack
Holds up to 14 different types of
preformed archwires. The clear hinged
lid keeps wires sanitary and dust free.
Sufficient height to fit either standard
or Pro Form™ archwires.
*Offer Excludes Stainless Steel Wire
®
Bio-Kinetix
Plus
Thermally Activated
The Variable Force 3
Archwire is a heat
activated, multi-force,
nickel titanium archwire
with three distinct
force regions.
10 PER PACK
.016 Upper
104-954
.016 Lower
104-955
.018 Upper
104-956
.018 Lower
104-957
.016 x .016 Upper 104-960
.016 x .016 Lower
104-961
.016 x .022 Upper 104-962
.016 x .022 Lower 104-963
.017 x .025 Upper 104-966
.017 x .025 Lower
Nitanium Archwires
Pro Form
Shape Wires
Oval Pro Form
III Shape Wires
Bio-Kinetix® Plus
.013 Upper
013 Lower
.014 Upper
.014 Lower
.016 Upper
016 Lower
.018 Upper
.018 Lower
.014 x .025 Upper
.014 x .025 Lower
.016 x .016 Upper
.016 x .016 Lower
.016 x .022 Upper
.016 x .022 Lower
.016 x .025 Upper
.016 x .025 Lower
.017 x .025 Upper
.017 x .025 Lower
.018 x .025 Upper
.018 x .025 Lower
.019 x .025 Upper
.019 x .025 Lower
.021 x .025 Upper
.021 x .025 Lower
.021 x .027 Upper
.021 x .027 Lower
10/pack
104-124
104-125
104-126
104-127
104-128
104-129
104-130
104-131
104-132
104-133
104-134
104-135
104-136
104-137
104-138
104-139
104-140
104-141
104-142
104-143
104-144
104-145
104-146
104-147
100-876
100-877
10/pack
104-150
104-151
104-152
104-153
104-154
104-155
104-156
104-157
104-158
104-159
104-160
104-161
104-162
104-163
104-164
104-165
104-166
104-167
–
–
104-170
104-171
–
–
–
–
D-LX Arch Form
Shape Wires
Proform Arch
Shape Wires
Bio-Kinetix®
Dimpled
Single 10/pack
10/pack
–
–
100-852 DM
100-853 DM
100-854 DM
100-855 DM
100-856 DM
100-857 DM
100-872 DM
100-873 DM
–
–
–
–
100-874 DM
100-875 DM
–
–
100-866 DM
100-867 DM
–
–
–
–
–
–
103-100
103-101
103-102
103-103
103-104
–
–
–
–
103-105
–
–
103-106
–
–
–
–
103-123
CNA™ Beta III
Pro Form Beta
Titanium Alloys
Archwires
(Improved TMA*Alternative)
Developed in consultation with
Dr. Ravi Nanda
UPPER
LOWER
.016
100-941 .016
100-951
.018
100-942 .018
100-952
.016 x .022 100-944 .016 x .022 100-954
.017 x .025 100-945 .017 x .025 100-955
.018 x .018 100-946 .018 x .018 100-956
.018 x .025 100-947 .018 x .025 100-957
.019 x .025 100-948 .019 x .025 100-958
.021 x .025 100-949 .021 x .025 100-959
*TMA is a registered trademark of Ormco Co
5 PER PACK
104-967
.018 x .018 Upper 104-968
.018 x .018 Lower
SMOOTH HIGH
POLISH FINISH!
®
Variable
Force 3™
Archwires
Three Distinct Forces,
All In One Archwire
120-005
104-969
.018 x .025 Upper 104-970
.018 x .025 Lower 104-971
PERMANENT LASER
MARKED BLACK MIDLINES
Nitanium® Super Elastic
Preformed Archwires
.019 x .025 Upper 104-972
.019 x .025 Lower 104-973
.020 x .020 Upper 104-974
.020 x .020 Lower 104-975
Proform Arches Also Available in S.S. and Bio-Kinetix ®
*Oval Arch Form III™ Archwires
More Narrow and Oval in shape. Offers variety in natural
arch form archwire. Allows the doctor to select archwires
that more closely match each patient’s needs. Available in
most popular sizes.
.012
.014
.016
.018
.020
.016 x .016
.016 x .022
.017 x .025
.018 x .018
.018 x .025
.019 x .025
.020 x .020
UPPER
LOWER
100-658
100-650
100-652
100-654
100-656
100-660
100-662
100-664
100-670
100-666
100-668
100-672
100-659
100-651
100-653
100-655
100-657
100-661
100-663
100-665
100-671
100-667
100-669
100-673
Dimpled Super-Elastic
Nitanium® Archwires
Dimpled “Notch” reduces
archwire drift and slide-out!
.014
.016
.018
.020
.016 x .016
.016 x .022
.017 x .025
.018 x .025
.019 x .025
UPPER
LOWER
100-800
100-802
100-804
100-806
100-808
100-810
100-812
100-814
100-816
100-801
100-803
100-805
100-807
100-809
100-811
100-813
100-815
100-817
10 per pack
10 per pack
Available in S.S., Nitanium, CNA™ & Bio-Kinetix®
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
27
LIGATURE TIES
Elastomerics
Colour
Ring-Tie
O-Tie
Mini-O-Tie
Hand-EE-Last
.120”
Standard
Chain
Long
Chain
Continuous
Chain
Black
400-807
400-757
400-707
400-234
400-157
400-346
400-343C
Blue
400-806
400-756
400-706
400-238
400-156
400-350
400-349C
Burgundy
400-814
400-764
400-714
400-246
400-164
400-379
400-378C
Carolina Blue
400-820
400-770
400-720
—
400-170
400-394
400-393C
Clear
400-802
400-752
400-702
400-223
400-152
400-318
400-316
Cobalt Blue
400-845
400-795
400-745
—
400-195
400-493L
400-493C
Dark Blue
400-835
400-785
400-735
—
400-185
400-485
400-484C
Glow Blue
400-837
400-787
—
—
—
—
—
Glow Natural
400-840
400-790
400-740
—
400-190
400-392
400-390
Glow Pink
400-841
400-791
—
—
—
—
—
Gold
400-813
400-763
400-713
400-237
400-163
400-373
400-372C
Grape
400-832
400-782
400-732
—
400-182
400-479
400-478C
Gray
400-844
400-794
400-744
400-222
400-194
400-315
400-313
402-015
Green
400-810
400-760
400-710
400-240
400-160
400-377
400-376C
O2 Elastomerics Colors
Light Green
400-834
400-784
400-734
—
400-184
400-483
400-482C
Light Pink
400-833
400-783
400-733
—
400-183
400-481
400-480C
Metallic Blue
400-830
400-780
400-730
—
400-180
400-383
400-382C
Metallic Green
400-829
400-779
400-729
—
400-179
400-477
400-476C
Metallic Purple
400-846
400-796
400-746
—
400-196
400-492L
400-492C
Metallic Red
400-831
400-781
400-731
—
400-181
400-385
400-384C
Neon Blue
400-812
400-762
400-712
400-231
400-162
400-473
400-472C
Neon Green
400-827
400-777
400-727
400-232
400-177
400-340
400-339C
Neon Pink
400-803
400-753
400-703
400-233
400-153
400-344
400-341C
Orange
400-824
400-774
400-724
400-242
400-174
400-389
400-388C
Pearl
400-843
400-793
400-743
—
400-193
400-398
400-397C
Periwinkle
400-821
400-771
400-721
—
400-171
400-396
400-395C
Purple
400-804
400-754
400-704
400-235
400-154
400-345
400-342C
Raspberry
400-836
400-786
400-736
—
400-186
400-487
400-486C
Red
400-805
400-755
400-705
400-236
400-155
400-375
400-374C
Silver
400-801
400-751
400-701
400-244
400-151
400-371
400-370C
Sky Blue
400-842
400-792
400-742
—
400-192
400-491
400-490C
Smoke
400-828
400-778
400-728
400-245
400-178
400-475
400-474C
Teal
400-825
400-775
400-725
400-243
400-175
400-471
400-470C
Vanilla
400-826
400-776
400-726
400-227
400-176
400-335
400-334C
White
400-809
400-759
400-709
400-239
400-159
400-381
400-380C
•Ligatures for individual patient use offer peace
of mind by avoiding cross-contamination
Yellow
400-808
400-758
400-708
400-241
400-158
400-348
400-347C
Assorted Colour
400-819
400-769
400-719
400-250
—
—
—
•Choose from 36 colours that resist fading
Small Assorted Kit
—
400-700
(18 COLOURS)
—
—
—
—
Large Assorted Kit
402-019
(24 COLOURS)
400-700XL
(26 COLOURS)
—
—
—
—
*BUY 15+ Packs
and GET A FREE
Ligature
Dispenser! (Empty)
This reference colour chart may be used in
your office for easy reordering of your
favourite colours. Catalogue No. 400-Chart
Ring-Tie
™
Ring-Tie .120
O-Tie™
Ring-Tie and O-Tie 80-Tie Ligatures
.120" diameter size (Non-Latex)
• 24 modules per stick, 30 sticks per pack
•Easily fits under bracket tie-wings
Chain
Elastic
15-foot spool.
Continuous
NEW
LARGER SIZE!
402-020
Single
Mini-O-Tie
Separators Ligature
Radio
Kits
(Latex-Free)
Opaque
1000 per pack
Standard
Regular Sizes
1000 per pack
Long
28
400-355
Larger Sizes
400-355L
Mini-O-Tie Ligature Kits (Latex-Free)
Small Kit (1800 ties) 18 individual
colours/10 sticks each 400-700
Empty 400-5BX
Large Kit (2600 ties) 26 individual
colours/10 sticks each 400-700XL
Empty 400-5BXXL
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
AMBER
NEON
CRYSTAL CLEAR
(LATEX-FREE)
Smile Safari™
Orthodontic Elastics
100 Elastics per Pack and 50 Packs per Box
Smile Safari™ Intraoral Elastics Chart
Light - 2.5 oz.
Medium - 4.5 oz.
Heavy - 6.5 oz.
*FREE!
Dispenser (Empty)
with order of
15+ Packs
Ligature Kit (Non Latex)
•Kitcontains24individual
colours, with a total of 270
sticks which include
11 sticks per colour
•Easily store all your ligature
colours as a complete system
•11" L x 7" W x 31/2" H
402-019
Ring-Ties Kit
402-020
O-Ties Kit
402-015
Empty Case
Combo Chain and
Ligature Dispenser
Combo Chain and Ligatures Dispenser
1/8”
Giraffe
Amber 407-020S
Chimpanzee
Amber 407-021S
Neon 401-041S
Clear 401-061S
Python
Amber 407-022S
3/16”
Holds 12 separated spaces for Ligatures and a
bar to accommodate 12 spools of short of chain
elastic. Clear cover with front cutout for chain
elastic facilitates use and provides protection
from dust. You may order the dispenser
preloaded with 12 colours of Ligatures and
matching standard chain; clear, blue, green,
neon pink, black, red, neon green, silver,
periwinkle, Metallic blue, grape and light
pink or empty 6”x 9” x 4”.
Preloaded Dispensers
Toucan
Amber 407-030S
Zebra
Amber 407-031S
Neon 401-042S
Clear 401-062S
Elephant
Gazelle
Lion
Rhino
Amber 407-041S
Neon 401-043S
Clear 401-063S
Leopard
Hippo
Amber 407-052S
3/8”
Vulture
Amber 407-060S
*FREE
BONUS OFFER
Buy 10+ Boxes
and GET a
FREE Rack
Warthog
Amber 407-061S
Neon 401-045S
Clear 401-065S
402-021
Empty
402-017
Deluxe Spool
*FREE!
Dispenser
Dispenser (Empty) •Aestheticallypleasing
design holds 18 spools
with order of •Easilyviewthespool
colours through the clear cover
18+ Spools
•Compactsize,10"x4"x4"
402-013
Glow in the Dark!
Gorilla
Amber 407-051S
Neon 401-044S
Clear 401-064S
O-Ties
Amber 407-042S
5/16”
Amber 407-050S
402-021
Amber 407-032S
1/4”
Amber 407-040S
Ring-Ties
Elastic
Attachers
Simplifies placement and removal of
intraoral elastics.
402-011
100 per pack
250 per pack
402-010
Glow Attachers
402-011G
100 per pack
Crocodile
Amber 407-062S
Carriere® Motion™
Oral Elastics
Force One 6 oz. ¼"
3
Force Two 8 oz. /16"
424-9F1
424-9F2
402-012S
*Offers cannot be used in conjunction with other offerings.
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
29
Auxiliaries
MIM Crimp Stop
Our MIM Crimp Stop can be placed
anywhere on an archwire to limit tooth
movement or maintain proper wire
positioning. Fits round or rectangular
wires up to .021 x .025. (10 per pack)
430-020
Orthodontic Patient Kits
Opti-MIM Direct
Bond Eyelet
®
with Chain
A great addition to a popular favourite.
Our eyelet is now available with a 1” length
sterling silver chain that can be used full length or
trimmed as needed. Strong and completely
biocompatible, the chain links are big enough to
thread power elastics through to
provide traction in the desired
direction to expose impacted teeth.
1 per pack 430-005C
Your patients will enjoy these bright colourful kits
that will provide them with everything they need
while wearing braces. The slim-case style is easy
to travel with and store. Assorted bright colours.
Sorry, we cannot guarantee specific colours
when ordering.
An assortment will be provided.
Each Slim-case includes:
• Orthodontic Tooth Brush
• Interproximal Brush
• Travel Brush
• Mint Wax
• Threaders
• 15-yard Mint Floss Spool
• Dental Mirror
660-101
Direct Bond Eyelet
This Nickel-Lite® eyelet can be easily bonded
to any tooth. It offers better bond
strength and a Grip-LOK® base.
10 per pack 430-005
Bite Guide™
Open Deep Bite Cases!
This one-piece appliance is bonded to the lingual side
of the upper centrals to efficiently open deep bite
cases. Features an anatomically shaped design
with smooth, radiused edges for maximum
patient comfort. The micro-etched
Grip-LOK® base adds superior bond strength.
DUAL PURPOSE DESIGN:
The Bite Guide’s reversible design allows the
practitioner the choice of advancing the
mandible while opening the bite.
(10 per pack)
Bite Guide™ Stainless Steel
Bite Guide™ Composite
Crimpable Archwire Hooks
Precision-cast crimpable hooks are easily crimped
onto archwire for precise placement in or outside
of the mouth. Crimp tubes create a strong, nonsliding lock with the archwire. Ball hook may be
bent for right or left applications. All hooks fit
round or rectangular wire up to .018 x .025.
Crimpable Ball Hooks
(20 per pack) 430-010
430-007
(20 per pack) RIGHTS 430-015
LEFTS 430-016
Composite
Direct Bond Button
30
663-4000-847
Crimpable Archwire Power Hooks
Round Base
• 3.5mm diameter flat base
• 80-gauge foil mesh base
• Eyelet welded to base
5 per pack 430-008
Rectangular Base
• 3.75mm x 3mm curved base
• Micro-etched mesh base
• One-piece construction
5 per pack 430-009
30
• Disposable or Reusable
• Provides a sanitary environment around the
sink
• Six assorted colours: 24 of each colour per pack
• Eliminates cross contamination
• Individually wrapped
• 4 rows of bristles
• 144 per pack
430-006
Eruption Appliance
10 per pack
Prepasted Toothbrushes
430-000
Hook Crimping Plier (Straight)
204-332
Direct Bond Lingual
Buttons
Single unit MIM construction provides ease
of placement and superior retention.
20 per pack 430-002
Micro Direct Bond
Lingual Buttons
The small size of these low-profile buttons
allows bonding in hard-to-reach areas.
10 per pack 430-001
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
Try our NEW
Metallic Cases
Standard or Special
Deep Lab Sizes
STANDARD
Large enough to hold upper or lower retainer
or a positioner
LAB
Ideal for Bionators, Frankel or special
lab appliances.
Increased strength
and durability.
All sizes and colours.
Improved latch.
Available in Metallic Black, Blue,
Red, Purple, Teal, Dark Green,
Florescent Green, Orange, Gold,
Neon Green & Gray.
Packages of 10, 100 or 300
Mixed Colours Available Only in
Packages of 100 or 300
Cheek Retractors
Adult Retractors 300-020
Pedo Retractors 300-021
Teen Retractors 300-022
Cheek Retractor Assort.
(3 – One each size) 300-023
Relief Wax
Provide orthodontic relief in six fun
ways! All waxes are in quality jewel
cases holding four strips of wax.
(50 cases per box)
Regular Wax
Set of 2
(clear case)
Retract EEZ®
Photo Lip Retractor
Bubblegum (pink case) 301-030BG
Cherry (red case) 301-030C
Lemon (yellow case)
301-030L
Orange (orange case) 301-030O
Excellent for occlusal photographs with
easy to grip handles, a great anatomical fit,
plus angled handles. Can be cold sterilized,
as well as autoclaved, though heat sterilization
may cause hazing of the material. 300-029
(clear case)
301-031
Any 4 Boxes of
Relief Wax and
™
Rhodium
Coated
Intraoral
GET
A FREE
Dispenser
Orthodontic relief gel (1/8
oz.
Photography
Mirrors
Brace Guard
For use in Class III cases.
Made of stainless steel and durable plastic.
Features a lightweight, comfortable design.
Easily adjusted to fit all patients.
Blue 426-055 Red 426-056
Teal 426-057 Pearl 426-058
tube) and silicone wax stick
dramatically reduce patient
discomfort.
Brace Relief Kit
Improve Your Image
(10 kits per pack) 301-032
Silicone Wax
(16 mini boxes)
301-036
All photographic
mirrors
are not the same. Mirrors coated with Rhodium, a silvery white precious metal, provide clearer,
Silicone
Wax
brighter images that will produce higher qualitypromote
Superior quality
pictures
arewhy
an excellent
tool to help
improve
patient education
and help
explain
major restorative
treatment
(30 mini boxes)
301-037dental pictures.
Extra Oral Elastics
Amber (1000 per pack) 1/2” Bulk Elastics
408-073
(8 oz.)
(16 oz.) 408-074
Rhodium-Coated Intraoral
Photography Mirrors
Riofoto BUY
Mint Scented Wax
Face Mask (Reverse Pull)
Riofoto™
301-030
Scented Cases
clinical
effectiveness
as provide
they may
be used to for patient records, insurance claims and case presentations to colleagues.
is
necessary.
They also
documentation
Item
A quality picture really is worth a thousand words!
Highest Reflectivity
Description
Catalogue No.
• Clear, sharper images with Rhodium coated mirrors
Riofoto Mirror
of 3 than chrome mirrors
• Up toX-Long
10% more Kit
reflectivity
631-109
(1 each of•631-101,
631-102
& 631-107)
Up to 20% more
reflectivity
than metal mirrors
Riofoto Mirror
Standard Kit of 6 (1 each of 631-103,
Highest Quality
631-110
631-104, 631-105,
631-106, 631-107 & 631-108)
• Dual-sided mirror for twice the life of one sided mirrors
Improve Your Image
•
Riofoto Mirror
X-Long (Adult)
All photographic mirrors are not the same. Mirrors coated
with Rhodium, a silvery white precious metal, provide
clearer, brighter images that will produce higher quality
dental pictures. Superior quality pictures are an excellent
tool to help improve clinical effectiveness as they may be
used to promote patient education and help explain why
major restorative treatment is necessary. They also
provide documentation for patient records, insurance
claims and case presentations to colleagues.
Riofoto Mirror
X-Long (Child)
which allows better adhesion of Rhodium coating to
631-102
provide outstanding wear resistance
Riofoto Mirror
Palatal (Adult)
631-103
Riofoto Mirror
Palatal
(Child)
Able to
withstand
repeated autoclave cycles up to
631-104
A quality picture really is worth a thousand words!
Riofoto Mirror Buccal (Wide Outside)
More durability from flatter, higher quality substrate,
•
Riofoto
631-101
350°(F)/180°(C)
s with
rounded corners
make these more
631-105
Mirror Lingual
(Narrow
Inside)
Patient
Comfortin the patient’s mouth
comfortable
Riofoto Mirror
Lingual (Wide Inside)
•
631-106
Thicker
mirror
Both
adult
and pediatric sizes - makes it easy to pick the
631-107
Riofoto Mirror Buccal (Narrow Outside)
right shape for your patient
631-108
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
31
31
Pliers & Instruments
Endura® Plus™
Tungsten Carbide
Plier Racks
Deluxe Mathieu Pliers
All of these mathieus feature a tungsten
carbide tip which is made of a harder and
more durable alloy than standard stainless
steel so it resists wear while ensuring a firm
grip over a longer life.
Endura® Plus™
Mathieu
Pliers
Our special Safe-T-Lock Mathieus (part
numbers #201-125 and #201-126) feature
locking jaws placed forward of the handle
to prevent the lock from pinching the skin or
snagging, catching and tearing gloves while
maintaining ease of use and comfort for
doctors and assistants.
FREE MATHIEU
Buy 6 Tungsten Pliers
and Get One FREE
Precision Tips
Non-Slip Grip
Operator Friendly
Assistants
will love
the
smaller 5”
Handle!!
Smaller
5” Size!
Smooth glide spring for consistent
opening and closing.
FREE BONUS OFFER
Buy 8 MATHIEU Pliers
and GET One FREE
201-124
A
Wide
Tip
B Narrow Tip
Narrow tip Mathieu-style needle
holder has serrated tips. Positive
locking ratchet permits instant
opening and closing. Very useful
in ligating. 201-121
Narrow
Tip
D 1/2 Fine Tip
This fine tip Mathieu is excellent
for placing elastic ligatures.
Precision serrations offer a nonslip grip. 5 1/2” long. 201-123
E Hook Tip
This hook tip Mathieu-style
needle holder has a notched
tip for ease and assurance in
placing elastics. Non-slip grip.
201-118
32
200-242
Upright Plier Stands
Holds up to 10 pliers. Easy cleaning surface
promotes a sterile environment. Available in
Granite Colour and White.
Granite 201-241
200-241
Upright Plier
Rack with
Cover
Convenient shelf
for double-ended
instruments!
200-243
B
Small Plier
Rack #8
C Hole Tip
Hole tip Mathieu-style needle
holder features a groove at tips
for non-slip placement of elastic
ligatures and other intraoral
elastics. 201-110
Portable compact size has space for 12 pliers and a
front well for assorted double-ended instruments.
Clear hinged lid keeps pliers sanitary and dust free.
White
A Wide Tip
Wide tip Mathieu-style needle
holder features serrated tips.
Positive locking ratchet permits
instant opening and closing. Very
useful in ligating. 201-101
Covered Plier Rack
C
201-101TC
201-121TC
Holds 8 Pliers.
White, pebblegrained plastic.
200-213
D
Wide
Tip
Narrow
Tip
Large Plier
Rack #15
NEW!
SAFE-T-LOCK!
Holds 15 Pliers.
White, pebblegrained plastic.
E
200-203
201-125
201-126
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
Band
Biter
Auto Clavable!
Multi-purpose
seater with
hardened
stainless steel
tip, molded
handle. Also
serves as bite
stick. 5” long.
200-308
Buccal
Tube
Bonder
#1 Design for
Accuracy!
This bracket-placing
tweezer has a contoured
tip with a
size and angulation
which facilitates bonding
and placement of molar
buccal tubes. As a
reverse action tweezer,
the fine tips hold the
buccal tube firmly within
the slot and release when
pressure is applied,
helping to make buccal
tube placement steady
and accurate.
200-324
Elastic Tube
0.25 Gray (25’) 400-025
0.25 Clear (25’) 400-036
Nitanium Open Coil
.010 x .030 15” Sp
100-751
Tissue Guard
0.27 Gray (10’) 400-330
0.27 Clear (10’) 400-331
Open Coil Spring S.S.
Elastic Thread
.010 x .030 (3’)
0.30 Gray (25’) 400-039
0.30 Clear (25’) 400-041
DuraTrac™
Stainless Steel
Cheek Retractor
663-4001-050
Closed Coil Spring S.S.
.010 x .030 (3’)
663-5100-071
106-060
*
Dblgard Std/w
Strap Mouthgard
12 per pack
106-040
10” Tooth Mirror
*
663-4002-213 *
Mirror with Braces
Mirror without Braces 663-4002-252 *
Dblgard Std/w
Out Strap Mouthgard
12 per pack
663-5100-096
*
.021” x .025”
Grip-Tight Lock
Bracket
Placer
Slot
Aligner
Dual Purpose!
With a bracket
holder on one
end and a slot
aligner
on the other
you’ll save
valuable chair
time using one
instrument!
200-322
SwivelHead
Bracket
Positioner
This quality stainless
steel tool has positions
for; 3.5mm, 4.0mm,
4.5mm and 5.0mm from
the occlusal surface.
The swivel-head design
adjusts its angle to
facilitate easy use on
anterior, cuspid and
bicuspid brackets.
200-223
(5/PK)
.021” x .025” Rt W/Hk
663-4046226
*
Grip-Tight Lock
663-4046025
Shorty Koby Twists
100 per pack
Lig.s .012
Lig.s .014
*
Animal
Toothbrush
Holders
663-4002-235
*
*
Fun Pencils
Grip-Tight Lock
(5/PK)
.021” x .025
663-4045-022
• 3” (7.6 cm) high
• 36 per pack, assorted animals
(5/PK)
.021” x .025” Left W/H
663-4046224
Stop/Split
Rectangular
• 36 assorted colours per pack
*
Pencil with Dental Mirror Tip
663-4002236
*
Pencil with Toothbrush Tip
663-4002237
*
100-413
100-414
Kobayashi Lig. Ties
100 per pack
.012 Long
100-405
Ligature Wire
Preformed
.009, .010, .011,
& .012
100-402
1000 per pack
Shorty Ligature Twists
500 per pack
Lig.s .010
Neon
Tooth Keychains
• 24 per pack, assorted colours 663-4002-247 *
Wind-up
Chomping Teeth
• 21/2” (6.4 cm) high
• 12 per pack
663-4002-233
*
100-412
* Indicates Masel ® Products
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
33
Kettenbach
Impression Material
5 Star rating for
Futar® Fast only
Bite Registration
Futar® Family
Enhance your laboratory
communication with accuracy
and quality of Futar®
bite registrations.
Can be conveniently milled and cut with a scalpel
Highly thixotropic; will not run into interproximal spaces, making
it easier to remove
Temporary crowns and bridges
Visalys® Temp
Outstanding mechanical properties for strong
and esthetic temporary crowns and bridges.
Visalys® dispenser system (10:1/4:1) gun
Easy application
Minimal smear layer
Exceptional stability
High-quality esthetics
Futar® – Bite registration
(Futar®/Futar® Fast/Futar® D/Futar® D Fast/Futar® Scan/Futar® D Slow)
Soft relining material
(Polyvinylsiloxane)
Mucopren® Soft
Polyvinylsiloxane
Silginat®
The readers of Dentistry Today, USA,
Bonds to the denture.
And lives up to its promise.
have voted Mucopren® soft among
the 100 most popular products.
The new standard for
preliminary impressions.
efe
2 0 1 1 Pr
r r e d Pr o
d
ucts
No hand mixing required
Guarantees a durable bond
to the denture base
Multiple pours
Supports uninterrupted
osseointegration in
implantology
Low tear resistance
High dimensional stability
Immediate pours
Easy to trim
34
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
Polyvinylsiloxane
Panasil®
2011
Top Impression
Material
A wide range of choices for a
wide range of indications.
Hydrophilic properties
High tear strength
Dimensional accuracy
High resistance to permanent
deformation
Vinylsiloxanether®
Identium® Family
The revolution in the one-step impression
technique.
Identium® is the preferred choice, to other
polyether products. Less expensive, better
clinical results, and patient friendly (odorless
and neutral taste)
Excellent flowability
Exceptional hydrophilicity
Easy removal from the mouth and model
Odorless and neutral taste
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
35
15
Triumph® Pliers
16
14
13
12
11
UTILITY PLIERS
10 Weingart Pliers
10
Our Most
Popular
Pliers
4 Multi-Use Cutter
Designed to cut soft-archwire, pins,
and ligature archwire up to .015"
(.38mm). 205-105
9
5 Mini Pin & Ligature Cutter
8
CUTTING INSTRUMENTS
1 Distal End Cutter
(Safety Hold)
Shear cuts hard archwire, and
can easily cut all types of
archwires ranging from
.012" (.30mm) to .021" x .025"
(.53mm x .64mm).
7
205-101
The smaller tips on this model allow
access into hard-to-reach areas.
Designed to cut soft-archwire, pins,
elastics, and ligature archwire up to
.012 (.30mm). 205-106
6 Micro Mini Pin &
Ligature Cutter
The fine tips on this model allow access
into hard-to-reach areas. Designed to
cut soft-archwire, pins, elastics, and
ligature archwire up to .012" (.30mm).
205-107
2 Distal End Cutter w/Long 7 Micro Mini Pin & Ligature
Handle (Safety Hold)
6
Long handle option that can
easily cut all types of archwires
ranging from .012" (.30mm) to
.021" x .025" (.53mm x .64mm).
205-101XL
3 Distal End Cutter Safety
Hold & Flush Cut
5
The safety hold cutter cuts flush
distal to the buccal tube. Cuts
all types of archwires up to
.020" (.51mm).
205-111
Replacement Silicone Inserts
(3 per pack)
4
205-011
Cutter, 15° Angled
15˚ offset with fine tips allow access
into hard-to-reach areas. Designed to
cut soft-archwire, pins, elastics, and
ligature archwire up to .012" (.30mm).
205-109
8 Micro Cutter
The extra fine tips allow access to
tight inter-bracket areas. Designed to
cut soft-archwire, pins, elastics, and
ligature archwire up to .012" (.30mm).
205-110
9 Hard Wire Cutter
2
UPRIGHT PLIER RACK
Serrated tips are designed for
superior archwire gripping. How
Pliers are useful for placement
and removal of archwires, pins,
and other auxiliaries.
205-203
12 Adhesive Removing Pliers
Superior tip design allows easy access
to remove excess adhesive after
debonding. Double ended replaceable
blade. 205-206
Adhesive Remover - Replacement
Blade 205-206B
Adhesive Remover - 1/4” Replacement
Pads (6) 205-206T
13 Posterior Band Remover,
Long
Safely and quickly removes posterior
bands. The pointed tip slides under the
band while the plastic tip protects the
occlusal surface of the tooth for easy
band removal and patient comfort.
205-207
Band Remover 3/16”
Replacement Pads (6)
205-207T
Band Remover 1/4”
Replacement Pads (6)
14 Debonding Pliers
Safely and easily removes steel,
ceramic, and plastic direct bond
brackets and remaining adhesive from
the tooth surface. 205-219
3
Buy 10 TRIUMPH®
Pliers &
Get a FREE
11 How Pliers
205-207TT
Designed to cut hard archwire
up to .022" x .028"
(.56mm x .71mm). 205-104
THE CUTTING
EDGE OF
ORTHODONTIC
PLIERS WITH
A DURABLE
SATIN FINISH
Serrated tips hold archwires
firmly in the mouth. Tapered
beaks fit easily into hard-toreach areas. 205-202
15 Angulated Debonding Pliers
B
The angulated design
quickly and easily
removes anterior and
posterior direct bond
brackets.
205-220XL
1
Offerings A, B, and C in TRIUMPH® Pliers cannot be used in conjunction with one another.
36
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
17
18
19
20
21
BUY 10 TRIUMPH®
PLIERS &
Get One FREE
A
22
A Premium Plier
16Crown & Band
23
Contouring Pliers
Ideal for reshaping molar bands and
crowns. 205-221
WIRE FORMING PLIERS
17 Jarabak Pliers
Excellent for precise wire bending
and forming of loops.
The fine serrations on
the square beak and
three precision grooves
permit accurate and
intricate bends and
loops. Archwires up to
.020" (.51mm)
205-301
18Three Jaw Pliers
Adjust clasps, retainers,
and archwires without
marring the archwire.
The precision tips are
carefully beveled to
create extreme accuracy
in adjustments. Archwires
up to .030" (.76mm).
205-302
19NiTi Three Jaw Pliers
Bends and forms NiTi
and all other archwires
up to .020"
(.51mm).
205-322
20 Light Wire Pliers
with Groove
Precision tapered
beaks allow intricate
bends and loops in
archwires up to .020"
(.51mm). The groove
ensures a no-slip grip.
205-305
21 Light Wire Pliers
Precision tapered
beaks allow intricate
bends and loops in
archwires up to .020"
(.51mm). 205-318
22 Rectangular Arch
Forming Pliers
7 Year Warranty
on Cutters
10 Year Warranty
on Benders
24
Easily torque and bend
archwires without nicking
the archwire. .070" blade
width. Archwires up to
.022" x .025" (.53mm x .64mm)
205-308
(See Catalogue for
Warranty Details)
25
23 Lingual Arch
Forming Pliers
Forms double-back and
triple-back bends in
.030" and .036" archwire for lingual
sheaths. 205-309
Contouring Pliers
Smooth working surfaces
allow for consistent forming
and contouring of arches up
to .030" (.76mm). 205-310
25 Tweed Loop
A versatile instrument
that bends and cuts
archwires up to
022" x .025"
(.53mm x .64mm).
27
205-325
29 Long Tapered
Forming Pliers
Excellent for making
precise loops in
.045", .060", & .075"
diameters in archwires
up to .022" x .025"
(.53mm x .64mm). 205-306
26 Stop (V-Bend) Pliers
Place an accurate 1mm V-Bend with
one simple squeeze to shorten
archwire or provide a positive stop.
Archwires up to
.022" x .025"
(.53mm x .64mm) 205-321
An instrument for all
types of archwire
bending. The round
and pyramid shaped
tapered beaks will
work with any size
archwire up to .030"
(.76mm) 205-304
28 Bird Beak Pliers
with Cutter
24 Hollow Chop
27 Bird Beak Pliers
26
Bird Beak Pliers
Long tapered beaks
allow for intricate
bends of archwires up to
.022" x .025" (.53mm x .64mm).
28
205-326
30 NiTi Distal Cinch
Back Pliers
29
Cinches and bends NiTi wire distal
to buccal tube. Archwires up to
.025" (.63mm) 205-327
FREE Covered
Plier Rack with
order of 15
TRIUMPH® Pliers
30
Our Most
Popular
Pliers
C
Phone Customer Service to
receive information on
Triumph Orthodontic
Instruments.
Offerings A, B, and C in TRIUMPH® Pliers cannot be used in conjunction with one another.
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
37
Endura® Plus™
Orthodontic Pliers
Endura® Plus™ Orthodontic Instruments
Performance, Usability, and Guaranteed Reliability
Our new Endura Plus Instruments have been designed and
manufactured with an attention to detail that will assure
enhanced performance and longevity. The care and precision
that goes into each and every instrument will ensure a quality
you can rely on every time you pick one up!
Endura Plus Instruments offer the following advantages:
• Superior performance stainless steel inserts
• Polished, corrosion-resistant finish
• Smooth and contoured edges
• Reliable flush screwjoint
• Laser-engraved part numbers and applicable
wire sizes on handles
Endura® Plus™ Cutting Instruments
Distal End Cutter (Safety Hold)
Can easily cut all types of wires ranging
from .012" (.30 mm)
to .021" x .025" (.53 mm x .64 mm).
Endura® Plus™ Utility Pliers
Slim Weingart Pliers
Serrated tips hold wires firmly in the
mouth. Tapered beaks fit easily into
hard-to-reach areas. 204-202
204-101
w/Long Handle 204-101XL
Distal End Cutter Safety Hold
& Flush Cut
The safety hold cutter cuts flush distal to
the buccal tube. Cuts all types of wires
from .010" (.25 mm) up to .020" (.51 mm).
204-111
Replacement Silicone Insert
(3 per pack) 205-011
Hard Wire Cutter, 15˚ Angled
Designed to cut hard wires ranging from
.010" (.25 mm) to .022" x .028" (.56 mm x
.71 mm). 204-103
Multi-Use Cutter
Designed to cut soft-wire pins and
ligature wire up to .015" (.38 mm).
204-105
Adhesive Removing Pliers
Superior tip design allows easy access to
remove excess adhesive after
debonding. Double ended replaceable
blade. 204-206
Adhesive Remover Replacement Blade 205-206B
Adhesive Remover ¼" Replacement Pads (6) 205-206T
Posterior Band Removing Pliers, Long
Safely and quickly removes posterior
bands. The pointed tip slides under the
band while the plastic tip protects the
occlusal surface of the tooth for easy
band removal and patient comfort.
204-207
Micro Mini Pin & Ligature Cutter
The fine tips on this model allow access
into hard-to-reach areas. Designed to cut
soft-wire pins, elastics, and ligature wire
up to .012" (.30 mm). 204-107
Band Remover 3⁄16"
Replacement Pads (6)
Band Remover 1/4"
Replacement Pads (6)
w/Long Handle
Debonding Pliers
Safely and easily removes steel, ceramic,
and plastic direct bond brackets and
remaining adhesive from the tooth
surface. 204-219
204-107XL
Micro Mini Pin & Ligature Cutter,
15° Angled
15˚ offset with fine tips allow access into
hard-to-reach areas. Designed to cut
soft-wire pins, elastics, and ligature wire
up to .012" (.30 mm). 204-109
Micro Cutter
The extra fine tips allow access to tight
inter-bracket areas. Designed to cut softwire pins, elastics, and ligature wire up to
.012" (.30 mm). 204-110
38
How Pliers
Serrated tips are designed for superior
wire gripping. How Pliers are useful for
placement and removal of archwires
pins, and other auxiliaries. 204-203
205-207T
205-207TT
Angulated Debonding Pliers
The angulated design quickly and easily
removes anterior and posterior direct
bond brackets. 204-220XL
Crown & Band Contouring Pliers
Ideal for reshaping molar bands and
crowns. 204-221
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
BUY 10 ENDURA®
PLUS™ PLIERS &
Get One FREE
A
Endura® Plus™ Wire Forming Instruments
Jarabak Pliers
Excellent for precise wire bending and
forming of loops. The fine serrations on
the square beak and three precision
grooves permit accurate and intricate
bends and loops.
Wires up to .020" (.51 mm) 204-301
Three Jaw Pliers
Adjust clasps, retainers, and archwires
without marring the wire. The precision
tips are carefully beveled to create
extreme accuracy in adjustments.
Wires up to .030" (.76 mm) 204-302
Bird Beak Pliers
An instrument for all types of wire
bending. The round- and pyramidshaped tapered beaks will work with any
size wire up to .030" (.76 mm).
204-304
Tweed Loop Forming Pliers
Excellent for making precise loops in
.045" (1.1 mm), .060" (1.5 mm), and
.075" (1.9 mm) diameters in wires up to
.022" x .025" (.53 mm x .64 mm).
204-306
Arch Bending Pliers
Easily torque and bend wires without
nicking the archwire.
.070" (1.8 mm) blade width. Wires up to
.022" x .025" (.53 mm x .64 mm)
204-307
Lingual Arch Forming Pliers
Forms double-back and triple-back
bends in .030" (.76 mm) and .036" (.91
mm) wire for lingual sheaths. 204-309
Buy 10 ENDURA®
Plus™ Pliers & Get
a FREE UPRIGHT
PLIER RACK
B
Hollow Chop Contouring Pliers
Smooth working surfaces allow for
consistent forming and contouring of arches
up to .030" (.76 mm).
204-310
Mini Three Jaw Pliers
Precision tips for accurate wire and clasp
adjusting and contouring. Also excellent
pliers for bonding of orthopedic
appliances. Superior strength for wires
up to .030" (.76 mm). 204-312
Light Wire Bird Beak Pliers
Precision tapered beaks allow intricate
bends and loops in archwires up to .020"
(.51 mm). 204-318
w/Groove 204-305
Nance Loop Forming Pliers
Precision loop forming with four step tip
(3, 4, 5, and 6 mm). Excellent for wires up
to .022" (.53 mm). Non-serrated tips and
beveled edges prevent wire scoring.
204-319
Stop (V-Bend) Pliers
Place an accurate 1 mm V-bend with one
simple squeeze to shorten archwire or
provide a positive stop. Wires up to
.022" x .025" (.53 mm x .64 mm).
204-321
Optical Pliers
Round and concave beaks bend round
or rectangular wire with a firm grip that
will not score wire. Easily bends and
forms all types of wire up to .022" x .025"
(.53 mm x .64 mm). 204-323
Bird Beak Pliers w/Cutter
A versatile instrument that bends and
cuts wire ranging from .015" (.38 mm) to
.025" (.64 mm).
204-325
FREE Covered Plier
Rack with order
of 15 ENDURA®
Plus™ Pliers
C
Offerings A, B and C in ENDURA® Plus Pliers cannot be used in conjunction with one another.
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
39
Carriere® Distalizer™ Appliance Cases Class II & III
INTRODUCING
BEFORE
AFTER
The Carriere®
Motion™
Class II
CLASS III APPLIANCE
Shifting the way you think about orthodontics.
Class II
Class II
Class III
The Carriere® SLX™ Self-ligating
Bracket System
Takes Clinical Performance and Patient
Outcomes to a New Level.
BIBLIOGRAPHY
CarriereSystem.com
The Carriere Philosophy.
© 2015 Ortho
Organizers, Inc.
All rights reserved.
U.S. Patent No. 7,621,743
and foreign patents.
Ortho Organizers
prescription does not
imply endorsement by
the doctor(s).
fast
natural
gentle
“ADVANCING THE FUTURE OF ORTHODONTICS”
24 HOUR DELIVERY UPON REQUEST
ALL OFFERS CANNOT BE USED IN CONJUNCTION WITH OTHER OFFERINGS.
Extended Hours for Atlantic Provinces Monday to Friday — 6am MST - 6pm MST
A CANADIAN COMPANY
Phone: 1.800.661.9567 Fax: 1.800.361.5088 Email: [email protected] www.aurumgroup.com
Phone: 1.800.661.9567  Fax: 1.800.361.5088  Email: [email protected]  www.aurumgroup.com
115 – 17TH AVENUE SW, CALGARY, AB T2S 0A1
SPECIAL OFFERS EXPIRE JUNE 30, 2016
ALL PRICING IS SUBJECT TO CHANGE