* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download PROMAX POWER-WASH-PLUS
Survey
Document related concepts
Transcript
MATERIAL SAFETY DATA SHEET MANUFACTURER: MAXIM CHEMICAL INTERNATIONAL LTD. 1305 HALIFAX STREET, REGINA, SK S4R 1T9 PHONE: (306) 347-0444 After Hours Emergency Phone: Canutec at (613) 996-6666 SECTION (1): PRODUCT IDENTIFICATION AND USE PRODUCT NAME: PROMAX POWER WASH PLUS PRODUCT USE: ALL PURPOSE CLEANER DEGREASER WHMIS CLASSIFICATION: D2B TDG CLASSIFICATION: Does not apply SECTION (2): HAZARDOUS INGREDIENTS CAS # Range % (by weight) Ethylene Glycol Monobutyl Ether 111-76-2 Exposure Limits: ACGIHTLV 25 ppm TWA LD50 (oral, rat): 470 mg/kg LD50 (dermal): 220 mg/kg LC50: Not available 5.0-10.0 Nitrilotriacetic Acid Sodium Salt LD50 (oral, rat): 3715 mg/kg LD50 (dermal): 10000 mg/kg LC50: Not available 1.0-5.0 18662-57-8 SECTION (3): PHYSICAL DATA (Typical values. May vary from sample to sample) Physical State: Appearance and Odor: Boiling Point: Specific Gravity: Solubility in Water: pH: Odor Threshold: Vapour Pressure: Vapour Density: Liquid Light amber liquid, mild odor Not determined 1.05 Soluble 10.7 No data Not determined Not determined .../2 PRODUCT NAME: PROMAX POWER WASH PLUS (cont'd) Page 2 SECTION (3): PHYSICAL DATA (cont'd) Evaporation Rate: Freezing Point: Coefficient of Water/Oil Distribution: Not determined Not determined Greater than 1.0 SECTION (4): FIRE AND EXPLOSION HAZARD DATA Flash Point (Closed cup): Extinguisher Media: Special Fire Fighting Procedures: Unusual Fire and Explosion Hazard: Flammable Limits: Auto-ignition Temperature: Conditions of Flammability: Explosion Data: Sensitivity to Mechanical Impact: Sensitivity to Static Discharge: None to boiling Water fog, C02, dry chemical. Wear self contained breathing apparatus in confined area or when exposed to combustion products. None known Not known Not known None None None SECTION (5): REACTIVITY DATA Stability: Incompatibility (Materials to avoid): Hazardous Decomposition Product: Hazardous Polymerization: Stable under normal storage conditions. Strong acids, oxidizers. Carbon oxides, phosphorus oxides. Will not occur SECTION (6): TOXICOLOGICAL PROPERTIES ROUTE OF ENTRY INFORMATION: Irritancy: Effects of Accute Exposure to Product: Effect of Chronic Exposure to Product: Skin and eye contact, inhalation. May cause eye, skin or respiratory tract irritation. Product exposure may cause eye and skin irritation. Excessive inhalation of vapor may cause headache, nausea, etc. Prolonged and repeated exposure may cause skin irritation and respiratory disorder. May be harmful if absorbed through skin. .../3 PRODUCT NAME: PROMAX POWER WASH PLUS (cont'd) Page 3 SECTION (6): TOXICOLOGICAL PROPERTIES (cont'd) Exposure Limits: Sensitization to Product: Carcinogenicity: Reproductive Toxicity: Teratogenicity: Mutagenicity: Name of Toxicologically Synergistic Product: See Section (2) under Hazardous Ingredients. No data. None known None known None known None known None known SECTION (7): PREVENTATIVE MEASURES Respiratory Protection: None required. If inhalation of concentrated product spry/mist is likely use a NIOSH approved dust/mist respirator. Ventilation: Use with good general ventilation. Protective Gloves: Use rubber or plastic gloves when handling the concentrated product. Eye Protection: Goggles or face shield. Disposal Procedures for Spills or Leaks: Wear protective equipment. Dike and contain large spills. Pump spill into an approved waste container. For small spills, soak up with a suitable absorbent and scoop into an approved waste container. Waste Disposal Method: Reuse if possible, or otherwise dispose recovered material in accordance with all local, provincial or federal regulations. Storage and Handling Procedures: Use good industrial hygiene. Do not get in eyes, on skin or on clothing. Do not breathe sprays/mists. Store in a cool, dry place away from incompatibles. Keep container closed when not in use. Do not mix with any other chemicals. Store at room temperature. SECTION (8): FIRST AID PROCEDURES EYES: SKIN: INHALATION: INGESTION: Flush with plenty of water for at least 15 minutes. Get medical attention. Wash well with plenty of water for 15 minutes. If skin irritation develops contact a physician. Remove to fresh air. Give plenty of water to drink. Do not induce vomiting. Call a physician. .../4 PRODUCT NAME: PROMAX POWER WASH PLUS (cont'd) Page 4 SECTION (9): PREPARATION INFORMATION Prepared by Technical Advisory services. Date: Revised: Phone: (306) 347-0444 September 10, 2001 September 10, 2004 The information provided in this Material Safety Data Sheet has been obtained from sources believed to be reliable. MAXIM CHEMICAL INTERNATIONAL LTD. provides no warranties expressed or implied and assumes no responsibility for the accuracy or the completeness of the data contained herein. MSDS-ID P301650