Download product pdf

2008
Solid State Lighting
Contents
Color Changing Lighting Systems
.
STR9 - Colour Changing . . . . . . . . . . . . . . . .
4-6
Linear Light Fixture
.
STR9 - Monochromatic . . . . . . . . . . . . . . . .
STR8 - Surface Mounted Under Counter & Cove LED Strip.
STR8-F - LED Task Light for Furniture . . . . . . . . . .
STR2 - Surface Mounted LED Strip . . . . . . . . . . .
IP-SF - Waterproof LED Light Module . . . . . . . . . .
.
.
.
.
.
Architectural Light Fixtures
.
CoinLight™ - Miniature Fixtures. . . . . . . . . . . .
DUCAT - Recessed Eyeball Fixture. . . . . . . . . . .
GULDEN - Arm Fixture . . . . . . . . . . . . . . .
Controls for LED Light Fixtures
8 - 10
11 - 12
13 - 14
15
16
18 - 20
21 - 22
23
.
DMX Converter . . . . . . . . . . . . . . . . . .
Push Dimmer. . . . . . . . . . . . . . . . . . .
Drivers and Power Supplies
Power Supplies - WMA, 25W & 40W . . . . . . . . . . . .
Power Supplies - 90W, 150W & 240W . . . . . . . . . . .
25
26
.
28
29
STR9-RGB . . . . . . . . . . . . . . . .
4-6
Colour Changing Solid State Lighting Fixtures
Colour Changing
STR9
Surface Mounted LED High Performance Fixture
IP66
When Size and Performance Matter...
The STR9 is small in stature but big in performance. This highlumen LED fixture is designed to create uniform illumination for
wall washing applications, or to produce a dramatic colourful
game of highlights and shadows on any surface.
With no visible fasteners, the STR9 has a clean, uncluttered,
sleek and modern appearance and due to its small and
unobtrusive size, this fixture will become almost invisible on
the structure to which it will be installed.
The STR9 is a totally sealed, low voltage fixture with an
external power supply, so there should be no need to ever
access the fixture for maintenance.
Because of our expertise in thermal management, we control
the heat produced by the diode,within a much smaller
housing. Because of our expertise in micro-processor design,
GVA can provide dr ivers, dimming and DMX interface
circuitry on the same pr inted circuit board as the diodes.
Through DMX programming, this fixture can produce virtually
any colour in the spectrum and with addressability in 300mm
segments, the effects that can be created are unlimited.
The benefit is a fixture that will offer super ior performance,
with a minimum 50,000 hr LED life and little or no
maintenance.
Available in ceiling, wall or ground mount configurations and
with adjustable tilt angle, the STR9 LED fixture offers an
innovative approach to colour changing illumination for both
indoor and outdoor applications.
Standard Features
l
IP 66 rated, completely sealed
l
Waterproof outdoor rated connection for power and data
l
Indoor and Outdoor applications from -25°C to +30°C
l
Clear hard anodized extruded aluminum body designed for
proper heat management, with diecast aluminum end caps
l
Optically clear tempered flat glass lens
l
Fastener free joints between body, end caps and glass
l
Integral temperature controls avoid overheating of LEDs
l
Cool beam, no heat (IR) from light source, no UV generated
l
12 - High Output LEDs per 300mm
l
DMX programmable in 300mm increments
l
Low voltage fixture
l
120VAC-240VAC/24VDC remote power supply included
l
Standard A101 Mounting bracket included
l
Maintenance and repair free
l
5 Year Limited Warranty
Optional Features
l
Five standard lengths available: 300mm, 600mm, 900mm,
1200mm and 1500mm nominal lengths
l
Clear Matte or Black Matte Anodized body
l
1W or 2.5W Light Emitting Diodes
l
Narrow, Medium, Wide or Elli ptical optics
l
DMX compatible
l
Attached or Remote power supply
l
Four lengths of Anodized aluminum adjustable mounting
brackets with precise 5° incremental aiming
l
Three fixed mounting brackets
Applications
l
Inter ior/Exter ior wall washing, grazing and area
illumination
l
Br idge illumination and highlighting with colour changing
light
l
Building highlighting, washing, grazing, cornice illumination
l
Roofs, washing and grazing in colour changing light
l
Architainment and special effect lighting
l
Illuminating columns, statues and monuments
/ 2008
72
Mechanical Drawing
500
300
120
Twelve LEDs/Foot in RGB Fixture
24.5
Fixture Lengths
Actual
300
325
2’
600
615
3’
900
905
4’
1200
1195
48
1’
31
Nominal Length
Feet
MM
72
18mm Maximum Bend Radius
Adjustable mounting brackets
154m
m
101m
m
61m
m
A210 Bracket - (210mm){not shown}
A154 Bracket - (154mm)
Adjustable Brackets
Pivoting with precise
incremental angle guage
A101 Bracket - (101mm)
A61 Bracket - (61mm)
PL-Mount Bracket
L-Mount Bracket
S-Mount Bracket
/ 2008
Colour Changing
STR9
Colour Changing
STR9
Computer simulation of project using STR9, SqLED and PixeLED fixtures.
Project completion scheduled for 2009.
Typical Wiring Diagram
Typical Layout for Fixture and
Attached Power Supply
Attached Power Supply
available for 900mm and
1200mm fixtures only.
Typical Layout for Fixture and
Remote Power Supply
Junction Box, cover and connectors
supplied by others
Junction Box, cover and connectors
supplied by others
PSU
Power Supply Unit
AC Input- 100-240VAC 50-60Hz
PSU Power Supply Unit
STR9
STR9
Specification Logic
Family
Length
Body Colour
Diodes
Wattage
LED Colour
STR9
300
600
900
1200
CM (Clear Matte)
BM (Black Matte)
12
1W
2.5W
RGB
Control
Power Supply Unit
DMX
A - Attached
R - Remote
Optics
NB - Narrow Beam (120)
MB - Medium Beam (250)
WB - Wide Beam (500)
EB - Elli ptical Beam (120x500)
Mounting Brackets
A61 - Adjustable, 61mm
A101 - Adjustable 101mm
A154 - Adjustable 154mm
A210 - Adjustable 210mm
L - L Bracket
PL - PL Bracket
S - S Bracket
Sample Logic: STR91200-CM-12-2.5W-RGB-NB-DMX-R-A101
/ 2008
STR9 - Monochromatic .
. . . . . . . . . . . . . . . 8 - 10
STR8 - Surface Mounted Under Counter & Cove LED Strip 11 - 12
STR8-F - Task Light for Furniture . . . . . . . . . . . . 13 - 14
STR2 - Surface Mounted LED Strip . . . . . . . . . . . 15
IP-SF - Waterproof LED Light Module
. . . . . . . . . 16
Linear Light Fixtures
Monochromatic
STR9
Surface Mounted LED High Performance Fixture
IP66
When Size and Performance Matter...
The STR9 is small in stature but big in performance. This highlumen LED fixture is designed to create uniform illumination for
monochromatic wall washing applications, or to produce a
dramatic dance of highlights and shadows on any surface.
With no visible fasteners, the STR9 has a clean, uncluttered,
sleek and modern appearance and due to its small and
unobtrusive size, this fixture will become almost invisible on
the structure to which it will be installed.
The STR9 is a totally sealed low voltage fixture, with an
external power supply, so there is no need to ever access the
fixture for maintenance.
Because of our expertise in thermal management, we control
the heat produced by the diode, within a much smaller
housing. Because of our expertise in micro-processor design,
GVA can provide dr ivers, dimming and DMX interface
circuitry on the same pr inted circuit board as the diodes.
Dimming and DMX addressability are in 300mm increments for
virtually unlimited effects.
The benefit is a fixture that will offer super ior performance,
with a minimum of 50,000hr. LED life and little or no
maintenance.
Available in ceiling or wall configurations, with adjustable tilt
angle and suitable for end-to-end installations, the STR9 LED
fixture offers an innovative approach to washing, grazing and
direct or indirect illumination for both indoor and outdoor
applications.
Standard Features
l
IP 66 rated, completely sealed
l
Waterproof outdoor rated connection for power and data
l
Indoor and Outdoor applications from -25°C to +30°C
l
Clear hard anodized extruded aluminum body designed for
proper heat management, with diecast aluminum end caps
l
Optically clear tempered flat glass lens
l
Fastener free joints between body, end caps and glass
l
Integral temperature controls avoid overheating of LEDs
l
Cool beam, no heat (IR) from light source, no UV generated
l
6 - High Output LEDs per 300mm
l
Dimmable and DMX programmable in 300mm increments
l
Low voltage fixture
l
120V-240VAC/24VDC power supply included
l
A101 Mounting Brackets included
l
Maintenance and repair free
l
5 Year Limited Warranty
l
Made in Canada
Optional Features
l
Five standard lengths available: 300mm, 600mm, 900mm,
1200mm and 1500mm nominal lengths
l
Clear Matte or Black Matte Anodized body
l
1W or 2.5W Light Emitting Diodes
l
Narrow, Medium, Wide or Elli ptical optics
l
DMX compatible
l
Dimmable with GVA Push Dim switch
l
Dimmable with Analog interface for most analog dimming
systems
l
Attached or Remote power supply
l
Four lengths of Anodized aluminum adjustable mounting
brackets. with precise 5° incremental aiming
l
Three fixed mounting brackets
Applications
l
Inter ior/exter ior wall washing, grazing and area
illumination
l
Br idge illumination and highlighting with monochromatic
white or coloured light
l
Building highlighting, washing, grazing, cornice illumination
l
Roofs, washing and grazing in white or coloured light
l
Ceilings, washing and indirect illumination.
l
Illuminating columns, statues and monuments
l
Ideally suited for Refr igeration or Freezer applications.
/ 2008
Mechanical Drawing
Dimension L
72
500
300
120
49.50
Six LEDs/Foot in Monochromatic Fixture
Fixture Lengths
Actual
300
306
2’
600
600
3’
900
900
4’
1200
1195
5’
1500
1495
48
1’
31
Nominal Length
Feet
MM
72
18mm Maximum Bend Radius
Adjustable mounting brackets
154m
m
101m
m
61m
m
A210 Bracket - (210mm){not shown}
A154 Bracket - (154mm)
Adjustable Brackets
Pivoting with precise
incremental angle guage
A101 Bracket - (101mm)
A61 Bracket - (61mm)
PL-Mount Bracket
L-Mount Bracket
S-Mount Bracket
/ 2008
Monochromatic
STR9
Installation
Typical Layout for Fixture and
Attached Power Supply
Attached Power Supply
available for 900mm and
1200mm fixtures only.
Typical Layout for Fixture and
Remote Power Supply
Junction Box, cover and connectors
supplied by others
Junction Box, cover and connectors
supplied by others
PSU
Power Supply Unit
AC Input- 100-240VAC 50-60Hz
PSU Power Supply Unit
STR9
STR9
Monochromatic
STR9
Al Garhood Bridge
Dubai, United Arab Emirates
Specification Logic
Family
Length
Body Colour
Diodes
Wattage
STR9
300
600
900
1200
1500
CM (Clear Matte)
BM (Black Matte)
6
1W
2.5W
Control
Power Supply Unit
Blank - on/off only
PD - Push Dim
AD - Analog Dimming
DMX
A - Attached
R - Remote
Mounting Brackets
A61 - Adjustable, 61mm
A101 - Adjustable, 101mm
A154 - Adjustable 154mm
A210 - Adjustable 210mm
L - L Bracket
PL - PL Bracket
S - S Bracket
Optics
LED Colour
WT - White
WWT - Warm White
AM - Amber
RO - Red-Orange
RD - Red
GR - Green
CY - Cyan
BL - Blue
RB - Royal Blue
NB - Narrow Beam (120)
MB - Medium Beam (250)
0
WB - Wide Beam (50 )
EB - Elli ptical Beam (120x500)
* Standard Product
Sample Logic: STR8-900-BM-6-2.5-3500-MB-PD-A-A101
/ 2007
/
2008
37
Monochromatic
STR8
Surface Mounted LED Strip
Patent 2541494
STR8 is a low voltage, low profile fixture ideally suited for
undercabinet, undercounter, showcase, bookcase, cove and
inter ior delineation applications where space is at a premium.
Available with two body colors and white or colored LEDs.
Patented design provides for super ior heat control, long life
and minimal maintenance and in addition, the heat control fins
provide excellent glare control when used under shelves or
cabinets.
Standard Features
Optional Features
l Low profile surface mounted str i p light with linear high
power LED light source
l Anodized aluminum body
l Extruded aluminum base is designed with fins for super ior
heat management
l Heat management system designed to function as a valance
to block light from direct view
l Aluminum base available in two standard colours
l Easy to install with #4 screws through mounting flange
l Designed to accommodate GVA’s LED Light Engines with
high power LEDs
l Power/Data cable - 600mm standard length
l Thermally protected
l Cool beam, no heat (IR) from light source, no UV generated
l Universal input voltage 15V - 30V DC
l 5 Year Limited Warranty
l
l
l
l
l
l
l
l
l
l
Nominal lengths of 300mm, 600mm, 900mm and 1200mm.
Clear Matte or Black Matte anodized body
Clear, Frosted or Opal len.
3 - 1W diodes, 6 - 1Watt or 0.6W diodes, or 12 - 0.6W
diodes available
120° and 70° beam angles available on select diodes
Five colour temperatures of White diodes, plus Red, Amber,
Green and Blue
High CRI available in three warm white,1W colour
temperatures diodes
Dimmable with GVA Push Dim
Dimmable with Analog interface for most dimming systems
Individually addressable and DMX compatible with GVA
interface
Applications
l
l
l
l
l
l
l
l
Retail counter, wall-case, showcase lighting
Residential kitchen under counter lighting
Library and bookshelf lighting
Linear architectural effects
Tight spaces where other lights wont fit
Cove and cornice lighting
Heat or UV sensitive installations
Anywhere low maintenance is desired
20.5mm
Mechanical Drawing
This Kitchen Designed by PDB Fine Cabinetry of Vero Beach,
Flor ida incorporates undercabinet fixtures to provide
appropr iate light levels on the counter.
The vertically mounted fixtures in the cabinets (Cyan)provide
accent illumination.
54mm
/ 2008
Monochromatic
STR8
Konzerthaus, Berlin, Germany
DMX controlled STR8 cove fixture
Hall of Fame Drive Bridge, Knoxville,
Tennessee
STR8 as light source for custom fixture by
Manning Lighting
Private Residence
Private Residence
Specification Logic
Nominal
Diodes
Family Length Extrusion Lens Colour
per 300mm
in mm
STR8
300
600
900
1200
Custom
CM (Clear
Matte)
BM (Black
Matte)
CLR (Clear)
FR (Frosted)
OPL (Opal)
3
Product
‡ High CRI Available in Warm White Only
CRI‡
Options
Optic
LED Colour
1W
120º
1W
120º
Blank-Standard
HI- High CRI
.6W
2700K
3000K*
3500K
4000K
120º
70º
.6W
5000K*
120º
70º
Blank-Standard
RD - Red
AM - Amber
GR - Green
BL - Blue
Blank-Standard
(Coloured Diodes
available with
120° Optic Only)
6
12
* Standard
Wattage
Blank (No Opt.)
PD- Push Dimming
AD - Analog
Dimming
DMX - DMX
Compatible,
Consult Factory
Sample Logic: STR8-600-CM-CLR-6-0.6-70-5100-PD
/ 2008
Monochromatic
STR8-F
Task Light for Furniture
Patent No. 2541494
STR8-F is specifically designed for quick installation as a task
light for office furniture.
Complete with a wall plug-in adapter and built-in rocker
switch, the STR8-F offers three mounting options.
STR8-F is an extremely compact,energy saving, versatile and
useful LED task lighting fixture.
Standard Features
l
Low profile surface mount str i plight with linear high power
LED light source
l
Six - 1W LEDs 083 ser ies from Nichia
l
Energy saving product: just 4W with three or 8W with six
LEDs per 300mm
l
Anodized aluminum base with clear, frosted or opal acrylic
lens
l
Standard nominal length of 300mm
l
Compact size: only 20.5mm (H) x 54mm (W).
l
Patented heat management system designed to work as a
valance to block light from direct view (glare control)
l
Aluminum base available in two standard colours
l
Built-In Rocker Switch (On/Off) for easy control
l
Easy to install
l
Cool beam, no heat (IR) and no UV generated from light
source
l
STR8-F is a low voltage fixture
l
Universal (100V-240V AC) switching wall plug-in adapter
with Low Voltage DC output
l
5 Year Limited Warranty for the fixture
l
1 Year Limited Warranty for the power adapter
Optional Features
l
Clear Matte or Black Matte body.
l
Five colour temperatures of white LEDs available
l
300mm, 600mm, 900mm, and 1200mm nominal lengths
l
Three 1W LEDs 083 Ser ies from Nichia.
l
Three mounting options: #4 screws (by others), Double sided
tape, Magnets.
Mechanical Drawing
Mechanical
Drawing
54
51
17,25
15,75
300
200
50
20,50
50
3,20
0,50
304,50
/ 2008
Monochromatic
STR8-F
Wall Mount Adapter
1146 lux with STR8-F
59 lux Ambient
Specification Logic
Family
STR8-F
Nominal
Length (mm)
300
600
900
1200
Body Colour
Lens Colour
BM - Black Matte
CM - Clear Matte
CLR (Clear)
FR (Frosted)
OPL (Opal)
Diodes
Per 300mm
LED
Colour
3
6
2700K
3000K*
3500K
4000K
5000K*
Mounting
SC - Screws
MG - Magnet
2ST - 2 sided tape
Power Supply
WMA - NA (North Amer ica)
WMA - EU (Europe)
WMA - UK (United Kingdom)
* Standard Product
Sample Logic: STR8-F-600-BM-CLR-6-3500-SC-WMA-NA
/ 2008
Monochromatic
STR2
Miniature Surface Mounted LED Strip
STR2 is a low voltage, low wattage linear fixture for inter ior
applications where space is at a premium.
This fixture is designed for easy installation and minimal
maintenance.
Ideally suited for Residential and Commercial applications.
Standard Features
Optional Features
l
Inter ior application very low profile surface mounted LED
str i p
l
Anodized aluminum base with frosted acrylic lens
l
Cool beam, no heat (IR) from light source, no UV
generated
l
Easy to install using Spr ing Mounting Cli ps or VHB (Very
High Bond) 2-sided tape
l
Safe low voltage operation
l
Available in nominal 150mm increments to maximum of
2400mm
l
12 or 24 diodes per 300mm
l
Choice of diodes in five colour temperatures of White plus
Red, Amber, Green or Blue
l
Double sided tape mount
l
Spr ing cli p mount
12.0 mm
l
Display case and bookshelf lighting
l
Tight spaces where other lights can not fit
l
Linear architectural effects
l
Cove and cornice lighting
l
Toe kick lighting
l
Pathway Marking (indoor)
l
Heat or UV sensitive applications
l
Anywhere low maintenance is required
13.7 mm
Mechanical Drawing
Applications
20.0 mm
#4 Pan Head Wood
screws by others.
Optional Mounting Cli p
Specification Logic
Family
Nominal
Length
Extrusion
Lens Colour
STR2
150
300
600
900
1200
Custom
CM (Clear
Matte)
FR (Frosted)
Diodes per
300mm
Wattage
6 - (150mm)
.08W
12 - (150mm &
300mm)
24 - (300mm)
Optic
LED Colour
Options
120º
2700K
3000K*
3500K
4000K
5000K*
RD - Red
AM - Amber
GR - Green
BL - Blue
2ST - 2 sided tape
MC - Mounting
Cli ps
* Standard
Product
Sample Logic: STR2-900-CM-FR-12-.08w-120-3500-2ST
/ 2008
Monochromatic
IP-SF
Waterproof LED Light Module
IP67
IP-SF is a low voltage, low wattage LED light module offer ing
an energy efficient, reliable and low cost lighting solution for
both indoor and outdoor illumination applications.
Ideally suited where moisture and low/high ambient
temperature is an issue.
Features Features
Standard
l
Three Super-Flux LEDs per module with wide beam angle (100° in
White and Warm White, 110° in Amber and 90° in all other
colors)
l
LEDs available in Red, Amber, Green, Blue and 5 colour
temperatures of white
l
Very long life (50% of initial lumens at 60,000 hours)
l
IP67 waterproof protection
l
Extreme ambient temperature range: -40°C to +40°C
l
30 pre-wired modules with jumper wires eliminate joints, save
installation time and provide the ability to build curved illuminated
line
l
Pre-applied VHB tape for quick installation
l
Two mounting flanges with pre-dr illed holes for a more
secure installation
l
Safe low voltage operation (12VDC)
l
Very low power consumption - 0.5W per module
l
Vibration proof
l
5 Year Limited Warranty
Applications
l
Coves
l
Halo and backlighting
l
Undercabinet/Undercounter
l
Markers
l
Delineation
Mechanical Drawing
Up to 30 modules in ser ies (or Leg)
Power consumption of 30 Modules is 15Watts
All dimensions are in millimetres
80
91
73
73
73
18
12
18
2
3.
2
52 +/- 2
22
Ø
3.2
91
114 +/- Maximum spacing
Specification Logic
Family
LED Colour
IP-SF
2700K
3000K*
3500K
4000K
5000K*
RD - Red
AM - Amber
GR - Green
BL - Blue
Number of modules
Specify quantity
of modules per leg to a
Maximum of 30
(30 modules per tray)
Minimum order - 10 Modules
* Standard Product
Sample Logic: IP-SF-BL-88
/ 2008
9
CoinLight® - Miniature Fixtures. . . . . . 18 -20
DUCAT - Recessed Eyeball Fixture . . . . 21 - 22
GULDEN - Arm Fixture . . . . . . . . . 23
Architectural Light Fixtures
Monochromatic
CoinLight®
Miniature LED Fixtures
Built around High Power LEDs this line of recessed and surface
mounted ultra compact light fixtures are so versatile that they
can be used just about anywhere!
CoinLight® is a registered GVA Lighting trademark.
CoinLight® utilizes a single High Power LED, deliver ing a var iety
of light distr ibution configurations: 120° (non-collimated), or
collimated optics in 50° (wide beam), 30° (medium beam), 12°
(narrow beam) and even 12°x50° (elli ptical).
The most compact CoinLight®,the CL04 fixture requires an
external LED dr iver.
CL03-BID ser ies fixtures have a Built-In-Dr iver which allows
wir ing flexibility, adds optional digital or analog dimming and
DMX compatible individual addressability.
Standard Features
Optional Features
l
1W High Power LED
l
With Built-In-Dr iver (CL-BID) or with External dr iver (CL04)
l
Built in thermal protection
l
9 LED colors in including Warm White
l
3 standard body styles
l
2 standard body and r ing colors: Clear Matte
and Black Matte
l
Machined aluminum anodized body
l
Clear or Opal protective lens made of polycarbonate
l
Safe low voltage operation
l
Vibration proof
l
No heat (IR) generated by light and no UV radiation
l
Maintenance free 50,000+ hours
l
5 Year Limited Warranty
l
Clear Matte or Black tr im r ing
l
Continuous,flicker free dimming from 0.5% - 100% with
Push-Dim
l
Analog dimming via GVA (0V-10V DC) interface
l
Extremely smooth, eye sensitivity optimized dimming curve
at all light levels
l
DMX compatible
l
Can be used in conjunction with GVA’s daylight-harvesting
l
control
l
120° Beam spread only with CL03-BID and CL04 Fixtures
l
12°, 30° and 50° optics available with CL03-BID-C Fixture
Family Overview
CL03-BID
CL03-BID-C
CL04
/ 2008
®
CL03-BID
(Concealed Mounting Holes with Ring)
l
1W LEDs
l
Recessed with concealed mounting holes
l
Decorative r ing
l
Universal input voltage 12-30VDC
Options:
l
Group and individually dimmable,
l
DMX compatible
Applications:
l
Decorative, special effects lighting
l
Display case
l
Indicator/marker lighting
Optional Spr ing
Cli ps (SC)shown,
suitable for 1/2-3/4
inch mater ial
CL03-BID-C
(Concealed Mounting Holes with Ring & Collimator)
l
1W LEDs
l
Recessed with concealed mounting holes
l
Decorative r ing
l
Available with 12°, 30°, 50°, 12°x50° optics
l
Universal input voltage 12-30VDC
Options:
l
Group and individually dimmable,
l
DMX compatible
Applications:
l
Retail and residential accent lighting
l
Directional light for UV and heat sensitive objects
Optional Spr ing
Cli ps (SC)shown,
suitable for 1/2-3/4
inch mater ial
Assembly Details
120º
Dr illing Pattern from
Bottom View
30mm Dia. Hole
Ø 3 mm (0.12”)
Ø 40 mm (1.57”)
12
0º
Accent/Display Lighting
Pr ivate Residence
Winni peg Manitoba
CL03-BID-C Fixture
Recommended mounting screws: #4-1/2” (M3-13mm)flat head Phili ps
Specification Logic
Family
Body/Trim Colour
CL03-BID
CL03-BID-C
CM - Clear Matte
BM - Black Matte
Custom - Anodized
LED
1 -1 Watt
Optics
(CLO3-BID-C)
LED Colour
WT - White
WWT - Warm White
RD - Red
RO - Red-Orange
AM - Amber
GR - Green
CY - Cyan
BL - Blue
RB - Royal Blue
NB - Narrow Beam
(12°)
MB - Medium Beam
(30°)
WB - Wide Beam
(50°)
EB - Elli ptical Beam
(12°x50°)
Options
Blank - No Options
PD - Push Dimming
AD - Analog Dimming
DMX - DMX Compatibile
SC - Spr ing Cli ps
Sample Logic: CL03-BID-C-BM-1W-WWT-MB-PD
/ 2008
Monochromatic
CoinLight
®
Monochromatic
CoinLight
CL04
(Surface Mounted)
l
1W LED
l
Surface mount, low profile LED fixture
l
Screw mount installation
l
Powered by an external dr iver
Applications:
l
Surface mount low profile installations
l
Decorative, special effects lighting
l
Display case
l
Indicator/Marker lighting
William J. Clinton Presidential Centre
Little Rock, AK
Lighting Design by Kyle Chepulis
Specification Logic
Family
CL04-BID
CL04
BodyCM
Colour
CM - Clear Matte
BM - Black Matte
Custom - Anodized
Lens
CLR - Clear
OPL - Opal
1W LED
1-1Watt
LED Colour
WT
CLR
WT - White
WWT - Warm White
RD - Red
RO - Red-Orange
AM - Amber
GR - Green
CY - Cyan
BL - Blue
RB - Royal Blue
Sample Logic: CL04-CM-OPL-1W-RB
/ 2008
Monochromatic
DUCAT IV
RECESSED EYEBALL DOWNLIGHT
DUCAT IV recessed eyeball light fixture is built around four
Nichia high power LEDs.
DUCAT IV is fully adjustable and available in a var iety of finishes.
Designers have a wide choice of body finishes and colours: single
colour or dual-finishes.
Standard Features
Built-In-Dr iver with very high efficiency
l
Low total power consumption (4.8W typical)
l
No heat (IR) generated by light and no UV radiation
l
Available in five colour temperatures of White plus Red,
l
Green, Blue and Amber
Available in three beam patterns: Narrow (12°), Medium (30°)
l
and Wide (50°)
Standard 80-85 CRI (Color Render ing Index)
l
High CRI option (typically 92)
l
Safe low voltage operation
l
Universal input voltage 20-30VDC (24V DC standard)
l
Thermally Protected
l
Die cast aluminum body and tr im optimized for proper
l
thermal management
Body and tr im are available in four solid colour finishes and
l
Optional Features
Continuous, flicker free dimming 0.5% -100% through pushl
dim, DMX or analog (0V-10V DC) interfaces
Extremely smooth, eye sensitivity optimized dimming curve
l
on the lowest light levels
DMX compatible
l
High CRI
l
two, two-tone metallic finishes
Vibration proof
l
Up to 25° tilt aiming angle
l
Easy spr ing mounting and electr ical connection
l
5 Year Limited Warranty
l
Dry location installations only
l
Applications
Applications
DUCAT IV is an excellent lighting fixture for:
l
Museums
l
Art galler ies
l
Retail
l
Exhibits
Silver Gray
Pearl Silver
Black
l
Displays
l
Offices
l
Residential
Satin Nickel/Chrome
Pearl Gold/Gold
/ 2008
Monochromatic
DUCAT IV
Mechanical Drawing
Ø 84.0
16.5
118
Ø 65.6
22.5
12.5
18.5
39.5
BL-150 and BL-300
16.5
56.0
Ø 33.2
±25°
Ø 47.8
Ø 95.0
Specification Logic
Family
DUC4
Body/Trim Colour
BLK - Graphite Black (RAL 9011)
SR - Silver Gray (RAL 7035)
PS - Pearl Silver
NM/CH - Satin Nickel/Chrome
PG/G - Pearl Gold/Gold
LED
Qty
LED
Power
4
1W
LED Colour
2700K
3000K*
3500K
4000K
CRI
Optics
Blank- Normal NB - Narrow Beam (12°)
CRI
MB - Medium Beam (30°)
H1- High CRI
WB - Wide Beam (50°)
Options
Blank - No Options
PD - Push Dimming
AD - Analog Dimming
DMX - DMX Compatible
Blank- Normal
5000K*
CRI
RD - Red
AM - Amber
GR - Green
BL - Blue
*Standard Product
Sample Logic: DUC4-NM/CH-4-1W-2800K-NB-PD
/ 2008
Monochromatic
Gulden
Versatile Arm Light
The Gulden LED fixture is a combination of sleek European
design and High-Technology in one compact unit.
Powered by a single LED light source and available in a
var iety of mounting options, this fixture is a perfect fit for
commercial, residential and architectural applications.
Standard Features
l
Anodized aluminum head optimized for maximum heat
management
l
Available in ceiling mount, wall-mount or clamp-on
configurations
l
Choice of stem (ST) or flexible gooseneck (GN)
l
External LED Dr iver required
l
Safe low voltage
l
Universal input voltage 12V-30VDC
l
Low power consumption (1.4W typical for 1W and 2.7W
typical for 2.5W)
l
No heat (IR) generated by light and no UV radiation
l
Available with nine LED colours including Warm White
l
Available in four beam patterns: Narrow (12°), Medium
(30°), Wide (50°) and Elli ptical (50°x12°).
l
80+ CRI (colour render ing)
l
5 Year Limited Warranty
Mechanical Drawing
l
Wall, Ceiling or Clamp Mount
l
Clear Matte or Black Body
l
Stem or Goose Neck arm
l
1W or 2.5W diode
l
Dimable with GVA controls
l
Continuous, flicker free dimming (0.5% - 100%) with push-dim,
or analog (0V-10V DC) interfaces
l
Double articulating neck
l
DMX compatible
Applications
All dimensions in mm
Gulden is an ideal choice as an accent or task light for:
l
Museums
l
Art galler ies
l
Retail
l
Exhibits
l
Hotels
l
Displays
l
Offices
l
Residential Applications
l
Industr ial
L
354°
28
Optional Features
For dimension L
See Stem Length in
Order ing Logic
Ø
°
90
30
60
Specification Logic
Family
GUL-WM
(Wall Mount)
GUL-CM
(Ceiling Mount)
GUL-CLP
(Clamp Mount)
Body Colour
Stem/Length
LED
LED Colour
CM - Clear Matte
BM - Black Matte
ST120mm
ST250mm*
ST400mm*
ST500mm
ST1000mm
GN120mm*
GN250mm*
Gn500mm
*Standard Stock
1W
2.5W
WT - White
WWT - Warm White
AM - Amber
RO - Red-Orange
RD - Red
GR - Green
CY - Cyan
BL - Blue
RB - Royal Blue
Optics
NB - Narrow Beam
(12°)
MB - Medium Beam
(30°)
WB - Wide Beam
(50°)
EB - Elli ptical Beam
(50° x 12°)
Options
Blank - No Options
SW -On/Off switch in
Gulden Wall Plate
PD - Push Dim
AD - Analog Dimming
DA - Double Articulating
40
Sample Logic: GUL-WM-CM-GN250-2.5W-RD-EB-SW
/ 2008
DMX Converter . . . . . . 25
Push Dimmer . . . . . . . 26
Controls for LED Lighting Fixtures
Controls
DMX Converter
CL-DMX
CL-DMX is designed to control a network of GVA's dimmable
or Colour Changing LED fixtures, which include CoinLight ,
Ducat, PixeLED and linear fixtures.
DMX Converter controls the br ightness or colour change of
each fixture in a network in accordance with the commands
supplied from an external DMX data source.
CL-DMX converts the DMX commands to GVA's propr ietary
digital control protocol.
CL-DMX is used to set the base address and define how
many GVA’s addressable devices will be assign for one DMX
address. This can be set through push button control with a
digital display outlining the parameters to the user.
Mechanical Drawing
Functional Flow Diagram
SELECT
EDIT
SELECT
A - ADDRESS (STARTING DMX ADDRESS)
C - COMBINE (NUMBER OF PCBs FOR 1 DMX ADDRESS)
D - DISPLAY (ON / OFF)
< DMX CONTROLLER
EDIT
SELECT
A - ADDRESS (STARTING DMX ADDRESS)
C - COMBINE (NUMBER OF PCBs FOR 1 DMX ADDRESS)
D - DISPLAY (ON / OFF)
SELECT
DMX IN
DMX OUT
DMX IN
DMX OUT
DMX IN
1 - COMMON
2 - DATA 3 - DATA +
1 - COMMON
2 - DATA 3 - DATA +
1 - COMMON
2 - DATA 3 - DATA +
1 - COMMON
2 - DATA 3 - DATA +
1 - COMMON
2 - DATA 3 - DATA +
Lighting
DMX CONVERTER
Lighting
CL-DMX-02
DMX CONVERTER
MADE IN CANADA
DATA OUT
COMMON
OUTPUT TO LED FIXTURES
COMMON
+8 ~ 24 V DC
DATA OUT
COMMON
DMX CONVERTER
OUTPUT TO LED FIXTURES
COMMON
+8 ~ 24 V DC
DATA OUT
COMMON
-
DMX CONVERTER
DMX
TERMINATOR
CL-DMX-02
MADE IN CANADA
POWER IN
OUTPUT TO LED FIXTURES
COMMON
+8 ~ 24 V DC
DATA OUT
COMMON
+
POWER IN
COMMON
+8 ~ 24 V DC
+
+
DC IN
DC IN
-
-
CoinLight, Ducat or PixeLED
1 - COMMON
2 - DATA 3 - DATA +
Lighting
CL-DMX-02
MADE IN CANADA
POWER IN
+
DC IN
DMX OUT
Lighting
CL-DMX-02
MADE IN CANADA
POWER IN
EDIT
A - ADDRESS (STARTING DMX ADDRESS)
C - COMBINE (NUMBER OF PCBs FOR 1 DMX ADDRESS)
D - DISPLAY (ON / OFF)
DMX OUT
1 - COMMON
2 - DATA 3 - DATA +
OUTPUT TO LED FIXTURES
SELECT
EDIT
A - ADDRESS (STARTING DMX ADDRESS)
C - COMBINE (NUMBER OF PCBs FOR 1 DMX ADDRESS)
D - DISPLAY (ON / OFF)
DMX IN
1 - COMMON
2 - DATA 3 - DATA +
DC IN
-
CoinLight, Ducat or PixeLED
Linear Fixtures
EDIT
CoinLight, Ducat or PixeLED
87.08
110.93
A - ADDRESS (STARTING DMX ADDRESS)
C - COMBINE (NUMBER OF PCBs FOR 1 DMX ADDRESS)
D - DISPLAY (ON / OFF)
Linear Fixtures
DMX IN
DMX OUT
1 - COMMON
2 - DATA 3 - DATA +
1 - COMMON
2 - DATA 3 - DATA +
Linear Fixtures
SqLed Fixtures
Lighting
DMX CONVERTER
CL-DMX-02
MADE IN CANADA
OUTPUT TO LED FIXTURES
POWER IN
256 PCS MAX
COMMON
+8 ~ 24 V DC
DATA OUT
COMMON
256 PCS MAX
256 PCS MAX
256 PCS MAX
l
Each CL-DMX can be used to control a network of up to 256
addressable GVA LED devices (these can be CoinLight, Ducat,
PixeLED, SqLED or addressable linear fixture or any
combination of these)
l
CL-DMX converters can be daisy-chained in ser ies for larger
installations
l
Maximum distance from DMX source to last CL-DMX unit is
330m (1000’)
l
Use only DMX approved connectors and cables
8.5
36.50
57.88
Specification Logic
Family
Model
Input Voltage
Options
DMX
CL-02
24 - 24VDC
Blank - No Options
PRE - Pre-Programmed in GVA Factory
(Contact Factory for programming options)
/ 2008
Controls
Push Dimmer
Push Dimmer and Accessories
Connector + Lead cable (Standard 150mm)
Illuminated Push Dimmers
l
Push Dimmer is a stainless steel, r ing illuminated, push button
l
Designed as a Push/Switch Dimmer for GVA's Push-Dim LED
and fluorescent light fixtures
l
Standard LED colour for illuminated r ing is Blue
l
Supplied with 150mm lead cable
l
Standard Input voltage: 24VDC
Push Dimmer in Decora Plate
Illuminated Push Dimmer
in Decora plate
l
Push Dimmer mounted into the Decora plate was designed
as a Push Dimmer for GVA's digitally dimmable LED and
fluorescent light fixtures. In conjunction with an occupancy
sensor (shown is the Leviton ODS10-IDW, by others) it
creates a simple and an inexpensive lighting control system
l
Optional LED colors for illuminated r ing are Red, Green,
Amber and White
l
Supplied with 150mm (6”) lead cable
l
Standard Input voltage: 24VDC
Mechanical Drawing
Specification Logic
LED
LED
Family
PD - Push Dimmer
PDDEC - Push Dimmer
with decora plate
(black, white, ivory
or gray)
Illumination Colour
Input Voltage
BL - Blue
RD - Red
GR - Green
AM - Amber
WT - White
12 - 12VDC
24 - 24VDC
Options
Blank -Standard Lead cable length (6”)
xxLL - Custom wire length
(xx- Length in Inches)
Sample Logic: LED-PD-BL-24
/ 2008
Power Supplies - WMA, 25W & 40W . . . . . . . 28
Power Supplies - 96W, 150W & DIN Rail
. . . . 29
LED Drivers and Power Supplies
GVA lighting products with BID Dr ivers require a constant voltage power supply in order to operate
correctly. The 25W and 40W constant voltage power supply comes in 12VDC or 24VDC output and can
be used to power the GVA lighting products with BID LED Dr ivers:
Plug in Power Supplies
For use with STR8-F Linear Fixture
Total Power
Input Voltage
Outputs
18 Watts
100 ~ 240 VAC
One
VDC
Model Number
WMA18 - 24 - .75
WMA18 - 12 - 1.5
24
12
Total Power
Input Voltage
Outputs
36 Watts
100 ~ 240 VAC
One
Model Number
WMA36 - 24 - 1.5
WMA36 - 12 - 3
VDC
24
12
A
Watts
.75
1.5
18
18
A
1.5
3
Watts
36
36
*Standard Product
PSU25-24
25 Watt Power Supply
Total Power
25 Watts
Input Voltage
Outputs
100 ~ 240 VAC
One
IP66
PSU40-24
40 Watt Power Supply
56
Total Power
Input Voltage
Outputs
40 Watts
100 ~ 240 VAC
One
IP66
/ 2008
POWER SUPPLIES
POWER SUPPLIES
GVA lighting products with BID Dr ivers require a constant voltage power supply in order to operate
correctly. The 96W, 150W and the 240W constant voltage power supply comes in 24V output and
can be used to power GVA fixtures with BID LED Dr ivers.
The 150W power supply is also available with 12VDC output.
96 Watt Power Supplies
Total Power
96 Watts
Input Voltage
Outputs
100~240 VAC
One - 24VDC
150 Watt Power Supply
Total Power
150 Watts
Input Voltage
100 ~ 240 VAC
Outputs
One - 24VDC
Also available with
12VDC Output
DIN Rail Mount Power Supplies
100W
Total Power
98.4 Watts
Outputs
Input Voltage
100~240 VAC
One - 24VDC
Input Voltage
100~240 VAC
One - 24VDC
180W
Total Power
180 Watts
Outputs
240W*
Total Power
240 Watts
Input Voltage
100~240 VAC
Outputs
One - 24VDC
*Standard Product
56
/ 2008
POWER SUPPLIES
Power Supplies
GVA Lighting,Inc.
3400 Ridgeway Dr. Units 12-14
Mississauga,Ontar io L5L 0A2
Canada
Phone: +1-905-569-6044
Toll Free Phone (USA and Canada):
1-877-GVA-LIGT or 1-877-482-5448
Fax: +1-905-569-9823
E-mail: [email protected]
[email protected]
[email protected]
www.gvalighting.com
Copyr ight 2008 GVA Lighting,Inc.
All r ights reserved.