Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Abdullah Al-Dushaishi Sr. Electrical Engineer Mobile no. +966 504962480 Email [email protected] About 14 years of experience in engineering, construction supervision, project and vendor quality inspection of Electrical design, works and materials. Having Strong skills such as: YEARS OF EXPERIENCE Experience in construction supervision and surveillance. Thorough knowledge of electrical materials and quality control and assurance. Review and assessment of Shop and as-built Drawings. Familiar with Saudi Aramco Specifications, procedures and forms. Familiar with international related Standards such as NEC, NEMA, IEEE and IEC. Total Years: 13+ Middle East: 13+ With Parsons: 2+ Attended and Completed: EDUCATION BSc. In Electrical Engineering, King Fahd University of Petroluem & Minerals (KFUPM), Dhahran, Saudi Arabia, February 2003 PROFESSIONAL MEMBERSHIP Membership of Saudi counsel of Engineers SCE (No. 288390), Degree Professional PE in Electrical Engineering Membership of Institute of Electrical and Electronics Engineers IEEE (No. 90373580) Membership of American Society for Quality ASQ (No. 64128829) Membership of International Association of Electrical Inspectors IAEI (No. 7071982) OTHERS Nationality: Saudi Languages: Arabic / English Year of Birth: 1977 Office Based: Dammam, Saudi Arabia 1| Saudi Aramco PEDD Course: EEX 103: ELECTRICAL POWER SYSTEM III Saudi Aramco Inspection Course: EIN 200 CATHODIC PROTECTION ECOMAN Course (UAE): Electrical Inspection & Testing Workshop Successfully completed the “Quality Management Systems (QMS) Auditor/Lead Auditor Training” conducted by SGS Dammam, Saudi Arabia. Successfully completed the “ISO 9001:2008 Internal Auditor Training” conducted by SGS Dammam, Saudi Arabia. Successfully completed the “Project Management (PMP) Preparation Training” conducted by Millennium Solutions Training Center, Saudi Arabia. Safety Recognition Certificate from “Qatif GOSP 1” Saudi Aramco PMT Safety Department. Appreciation Certificate for Safety Contribution from SNAMPROGETTI Safety Department. Appreciation Certificate for Safety Valuable Contribution from Saudi Aramco Inspection Department in 2010. RELEVANT PROJECT EXPERIENCE Abdullah Al-Dushaishi Sr. Electrical Engineer Mobile no. +966 504962480 Email [email protected] RELEVANT PROJECT EXPERIENCE Saudi Arabian Parsons Limited, Dammam, Saudi Arabia Senior Electrical Engineer Mar 2014 - Present Project: Ministry of Housing Dammam North Project, Dammam, Saudi Arabia Responsibilities: Coordinate and liaise with utility end-user representatives and Contractor with regard to all construction approvals and design changes. Ensure the Contractor's compliance with the Contract Documents. Provide general oversight of the Contractor's inspection, surveying, and testing requests for electrical works. Review and approve the Contractor's electrical shop drawings. Review and approve the Contractor's proposed materials and methods. Monitor materials submissions and approvals and review updates to materials schedule to mitigate construction delays. Review and provide response to the Contractor's Request for Information (RFI). Monitor conformance with the Contractor's schedule. Coordinate and monitor all inspections, testing, and materials reconciliation required to commission all electrical works, in order to obtain final NOCs. Provide general oversight of Inspector's daily activities, including work assignments, on-site performance, and guidance on the supervision of the Contractor's operations. Review Inspector's Daily Reports. Verify measurements of work taken by inspectors and land surveyors. Keep complete and accurate records of the work and quantities completed. Review as-built drawings in coordination with inspectors and surveyors. SGS Inspection Services Saudi Arabia Ltd., Dammam, Saudi Arabia Senior Electrical Inspection Engineer Dec 2007 – Mar 2014 A. Vendor Inspection Responsibilities: Projects: Industerial Inspection Services 2| Carry out vendor and third party inspections of the electrical items during the in-process and/or final stage of production/assembly at the vendor's factory in accordance with the client's requirements (e.g. Saudi ARAMCO and SEC specifications) and international standards. Witness electrical equipment & system tests. Conduct electrical expediting jobs at various factories within Saudi Arabia. Make comprehensive report based on the results of the conducted inspection in accordance with the company's procedure for submission to client. Perform continuous vendor and third party inspections of various electrical equipment e.g. power cables; fiber optic and instrumentation cables; power and distribution transformers; metalclad switchgear, controlgear (MCC); switchrack; SAS, SCADA RTU, protection relay and control panels, AC/DC distribution boards and telecom equipments (PSE, DVM, SDH) at Abdullah Al-Dushaishi Sr. Electrical Engineer Mobile no. +966 504962480 Email [email protected] different factories and establishments within the Kingdom of Saudi Arabia and GCC states since 2008. Approved by Saudi ARAMCO to conduct vendor inspection of various electrical equipment including Panels, Switchracks, Cables, Motor Control Center (MCC), Switchgear, RTU, Control Panels/Systems and Cathodic Protection (CP) (QM48) [SAP # 70009074 for Saudi Aramco Approval]. Approved by Saudi Electricity Company (SEC) to conduct third party inspection of various electrical items including Ground Wire Bare Conductors, Type ACSR/AW Bare Conductors, Fiber Optic Cable, Non-Metallic Fiber Optic (F/O) Cable & Accessories, RMU (15 KV), Link Box for U/G Power, AC & DC Dist. Panels, Relay & Control Panel, Remote Terminal Unit (RTU), Sequence of Events Recorder (SOER), Cables, OH Cables, Switchgear, Transformers, Annunciation Panel, AMR Panel, telecom equipments (PSE, DVM, SDH), and SAS. Approved by Royal Commission, SABIC & Ma’aden to conduct vendor inspection for ESD & DCS, Line Protection, Metering & Marshalling Panels, AC/DC Panels, Switchgears and Transformers. Major Factories visited for Inspection: AF IMPALLOY, EEIC, WESCOSA, AB-COPE, REMAL, MESC, SOGEC, Saudi Lucy, CORPRO, STC, TIEPCO, ABB AUTOMATION, ABB ELEC., JAL INTERNATIONAL, RAWABI, ARABIAN POINT 8, AES, ABB ELEMAC, ALFANAR, SIEMENS, INMA, AREVA, Schneider, Advanced Electronics, RIYADH CABLES, MEFC, Saudi Cables, CPRI (India), MICROSOL (Dubai), MIDAL CABLES (Bahrain), INVENSIS (Dubai), ETA-PCS (Ajman), INGENIOUS (SHARJAH), Oman Cables (Oman), Federal Transformers (Abu Dhabi), MESC (Jordan) etc. B. Project Inspection Responsibilities: Project: Saudi Aramco Ras Tanoura Projects Inspection Unit Saudi Aramco Inspection Department (SAPID) Feb 2010 – Oct 2011 3| Perform inspections on above and below ground electrical installations. Perform inspections on electrical equipment such as switchgears, MCCs, panels, transformers, etc. Witness electrical equipment & system Pre-commissioning tests. Perform variety of inspection function providing day-to-day work. Assure that material are correct for the intend service. Assure work performed conforms to engineering specifications and SAUDI ARAMCO Standards and Procedures. Monitor the implementation of project Quality Control Procedures and Inspection Test Plans. Review design drawings of the project. Prepare final walkthrough and final exception items using MPCS (Mechanical Performance & Close-Out System). Abdullah Al-Dushaishi Sr. Electrical Engineer Mobile no. +966 504962480 Email [email protected] Hugayet Contracting Est. (ITS Contractor for Aramco), Khursaniyah, Saudi Arabia Electrical Inspection Engineer II May 2006 – Nov 2007 Project: Khursaniyah Gas Projects Inspection Unit Saudi Aramco Inspection Department (SAPID) Responsibilities: Perform inspections on above and below ground electrical installations. Perform inspections on electrical equipment such as switchgears, MCCs, panels, transformers, etc. Witness electrical equipment & system Pre-commissioning tests. Perform variety of inspection function providing day-to-day work. Assure that material are correct for the intend service. Assure work performed conforms to engineering specifications and SAUDI ARAMCO Standards and Procedures. Monitor the implementation of project Quality Control Procedures and Inspection Test Plans. Review design drawings of the project. Prepare final walkthrough and final exception items using MPCS (Mechanical Performance & Close-Out System). Use SAP QM Module for updating QA/QC personnel. Resource Sciences Arabia Ltd. Company (MTS Contractor for Aramco), Dammam, Saudi Arabia Electrical Engineer Jan 2006 – Apr 2006 Projects: Maintenance projects Saudi Aramco Material Handling Engineering & Services Division Responsibilities: To Design and modify power and lighting layouts of warehouses and storeyards, preparing bill of materials for electrical installation works using Mainframe program, review design packages of maintenance projects. Azmi Abdulhadi & Abdullah Al-Muaibed Consulting & Design Engineering Company (GES Contractor for Aramco), Al-Khobar, Saudi Arabia Electrical Engineer Sep 2004 – Dec 2005 Project: Saudi Aramco AFK (Abu-Hadriyah, Fadhili & Khursaniyah) Water Well Sites Design Project Responsibilities: To implement applicable Saudi Aramco specifications, Quality Procedures, Work Instructions and Quality Forms, prepare the Construction Specifications for designed projects, prepare Construction Scope of Work (CSOW), prepare material take-off (MTO) using Saudi Aramco Materials Systems Specifications (SAMSS). 4| Abdullah Al-Dushaishi Sr. Electrical Engineer Mobile no. +966 504962480 Email [email protected] Snamprogetti Saudi Arabia Ltd., Juaymah, Saudi Arabia Electrical Engineer Apr 2003 – Aug 2004 Project: Saudi Aramco Qatif GOSP-1 complex Project Responsibilities: 5| Study the design drawings and documents in accordance with Saudi ARAMCO engineering standards. Control all documents related to electrical department. Supervise construction works. Modify project drawings as per design and site requirements. Report site progress and activities. Study & analyze problems and getting clearance for punch list. Prepare energization packages. Request materials and approve suggested materials by subcontractors.