Download PS-100 • Power supply module 24 Vdc 100 VA +

PS-100 • Power supply module 24 Vdc
100 VA + manual control
The PS-100 is a 24 Vdc / 100 VA power supply module. Two
versions are available, the PS-100-1 which is suitable for one
motor and the PS-100-2 for two motors. The switch on the
front allows you to choose between automatic or manual
operation. The PS-100 is perfect for use with the Hotraco
SmartWinch winch motors, and it can naturally also be used
for Belimo or tubular motors, for example.
Control
‘Man’
‘Auto‘
You can select the desired motor position with the rotary knob
on the front panel.
The desired motor position is determined by the main controller.
The control signal from the main controller and the motors can be set
using the DIP switches on the PS-100 (see drawing page 2). There is
also a status LED above each manual control. This shows the current
status of the connected motor (or group of motors), such as an alarm or
a configuration error.
Optional: HNO-PS uninterruptible power supply
The HNO-PS will use internal batteries to provide power to the motor (or
group of motors) connected to the PS-100, making it possible to send
the motors to a pre-set emergency position. The desired emergency
position can be set on the PS-100. The options are:
•
Emergency position set on the SmartWinch
•
Completely open
•
Completely closed
•
Send to a position set with the rotary knob on the PS-100.
Stationsstraat 142
5963 AC Hegelsom
The Netherlands
T +31 (0)77 327 5020
F +31 (0)77 327 5021
[email protected]
www.hotraco-agri.com
Hotraco Agri is a globally operating
supplier of innovative computerized
systems for use in the pig and poultry
sectors specialised in creating and
maintaining an optimum indoor climate.
Hotraco Agri’s main focus is on the
development and manufacture of
customized computers that regulate,
control and monitor the overall animal
house system. From climate control
and air conditioning, feed and water
control, animal weighing, egg counting
to fire safety. Over 100 employees
serve customers on all continents with
innovative and technically advanced
systems. The fact that Hotraco Agri has
its own R&D and development department
means that it is ALWAYS able to deliver
customized products and develop
problem-specific solutions.
Helpdesk 24/7
Hotraco’s helpdesk and service centre
is available 24/7. Our team has the
possibility to monitor and control our
clients’ systems, wherever in the world,
via state of the art ICT technology.
•1•
PS-100 • Power supply module 24 Vdc 100 VA + manual control
Motor 1
Motor 1
Input signal (main controller)*
Alarm
Control signal motor 1*
Supply voltage motor 1
Motor 2 (Only with PS-100-2)
Motor 2 (Only with PS-100-2)
Input signal (main controller)*
Alarm
Control signal motor 2*
Supply voltage motor 2
HNO-PS (Only with HPO-PS connected)
Power from HNO
HNO active
24 Vdc
24 Vdc
Alarm
24 Vdc
HNO-PS (Only with HPO-PS connected)
Power to HNO
24 Vdc
*Input signal configurable on the PS-100:
0%
100%
0 Volt
10 Volt
1 Volt
10 Volt
2 Volt
10 Volt
10 Volt
0 Volt
10 Volt
1 Volt
10 Volt
2 Volt
PS-100-2
HNO-PS
Power supply 230 Vac
Input signal, motor 1
24 Vdc
Alarm in
HNO active
Alarm out
Input signal, motor 2
Alarm
Input signal
Input signal
SmartWinch 1
Alarm
Alarm
Power
Power
•2•
SmartWinch 2
1410-12008
PS-100 • Power supply module 24 Vdc 100 VA + manual control
TECHNICAL SPECIFICATIONS
Electrical
Supply voltage
100...250 Vac, 50 / 60 Hz
Power consumption
Max. 112 W
Protection
Short-circuit, overload, overvoltage and temperature
Input, control signal from main controller
0 - 10 Vdc (Ri = 50 kΩ)
Power for motor
24 Vdc
Output, control signal for motor
0...10 Vdc, max. 1 mA
Input, motor alarm
Open-circuit voltage 5 Vdc
Input, HNO active
Open-circuit voltage 5 Vdc
Output voltage for HNO
24 Vdc
Input voltage for HNO
24 Vdc
Alarm contact
0.5 A, 24 Vac / dc
CE-Directives
EMC
2004 / 108 / EC
Low voltage
2006 / 95 / EC
Mechanical
Ambient temperature
0...40 °C
Dimensions (H x W x D)
243 x 192 x 117mm
Housing
IP 54 ABS
Weight
approx. 3 kg
•3•
1410-12008