Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Mains electricity wikipedia , lookup
Stray voltage wikipedia , lookup
Aluminium-conductor steel-reinforced cable wikipedia , lookup
Alternating current wikipedia , lookup
Ground (electricity) wikipedia , lookup
Electromagnetic compatibility wikipedia , lookup
Skin effect wikipedia , lookup
LSC-7D Lightning Strike Counter Installation Instruction Installation Lightning Protection Part of THE ALLTEC ® PROTECTION PYRAMID L E V E L : Lightning Protection F U N C T I O N : Monitoring Lightning Strikes assists in determining the need for additional security such as grounding, surge suppression and lightning protection. The LSC-7D connections should be electrically attached to the tower using 14 AWG (2.5mm2) insulated wire and be separated by approximately 8.0 ft (2.4m). The inductive voltage drop due to a lightning strike will actuate the counter. A log should be kept to record the date and counter reading. To test your counter, voltage may be momentarily applied using a 9V battery in either polarity to actuate the circuit. The LSC-7D requires a 0.5 μH inductance shunt (approximately 8.0 ft conductor length) to count nature’s smallest lightning strike (3 kA). This inductance can be in the form of a wire length, tower, or pipe segment. To calculate, use the following approximations: • 0.3 μH per foot per wire • 0.067 μH per foot for triangular tower leg • 0.150 μH per foot for >/= 6” pipe BENEFITS: The LSC-7D connection must be in direct contact with the metallic wire or metallic structure being monitored. Clean, sand, or pierce as required. No Maintenance: Requiring no external power supply or internal battery for operation. NOTE: No user serviceable parts inside. Do not loosen sealing nuts. Sealing nuts adjacent to enclosure (Do not loosen) Easy to Install: Uses a 2-wire connection to any metal conductor for lightning voltage detection, conductor dimensions are unimportant. DCounte m CS-t7 rike bal.co LnS glo ing tec A LS r M IN ht N TE R Lig w SA U E IN D MA C O N N EC TI O Easy to Monitor: Easily viewable from the front. .all ww Weather Resistant: Includes a NEMA 4X/ IP66, UV stabilized polycarbonate enclosure with surface mount flanges, UL94V-0 flame rated and suitable for either indoor or outdoor installation. Installation nuts & lock washers Size Width Height 5.5 inch (139.7mm) 3.5 inch (88.9mm) www.alltecglobal.com Depth 1.5 inch (38.1mm) LSC-7D Lightning Strike Counter Installation Instruction Installation Examples Building Model Tower Model Tower Clamp Conductor Clamp C O N N E C T I O N T E R M I N A LS 8.0 ft (2.4 m) 0000002 8.0 ft (2.4 m) LSC-7D Lightning Strike Counter www.alltecglobal.com MADE IN USA LSC-7D Unit Tower Clamp Conductor Clamp CONNECTION TERMINAL S MADE IN USA 000002 LSC-6D www.alltecglobal.com Lightning Strike Counter LSC-7D Unit SOLUTION PROVIDERS FOR AN ENERGIZED WORLD™ WORLD HEADQUARTERS 64 Catalyst Drive, Canton, North Carolina 28716 USA TEL: +1.828.646.9290 | FAX: +1.828.646.9527 EMAIL: [email protected] ALLTEC has offices located across the world. Go to www.alltecglobal.com/contact to connect with your regional office. www.alltecglobal.com © 2015 ALLTEC | 420-003 | 4/29/2015