Download VectroPhone Track Pro - VecProm-Technical

VectroPhone Track Pro NT
2.0
- Technical Presentation
Product data
•
•
•
•
•
•
•
•
•
•
•
900/1800 MHz Dual Band GSM mobile phone
12-channel high performance GPS receiver
Hybrid positioning
GPS power management for better operating times
Professional ergonomics
Glass fibre cover
Tough and splash proof (endure 1 meter fall on
concrete, IPX 4)
Battery up to 1700 mAh
VectroGuard multifunction button
Hands Free function - freedom to work and share
discussion
+ ordinary phone features
Professional Ergonomics
•Keypad is optimised for ease of use in harsh
environment
•Design and material, easy to grip
•VectroGuard multifunction button is easy to use
VectroGuard Button
- configurable multifunction key
•Meets the EN 50134 standard for emergency use
•Can be configured for several different purposes
•Emergency call/-message
•Status message sending
•Mobile Group, Push-to-talk
•Primary alarm function always kept
Hands-Free Phone
Freedom to Work and Share Discussion
•Very good voice quality
•“Oversized” earpiece
•Possible to use as a speaker phone
•Frees user’s both hands
•Allows several people to listen in to a conversation
Telematic Features
Task and work optimisation
Emergency and safety
• Login / Logout
• Status Message
• Direct on screen Messaging (Class-0
SMS)
• Tracking
• Area Tracking
• Navigation and Route Point
• Send Position
• Location Request/History
• Waypoint Tracking*
• Trace Download by Data Call (CSD)*
• Emergency Call/SMS
• Condition Check
• Verticality Sensor*
• Movement Sensor*
* Option
** Requires 3rd party service
Communication
• Mobile Group**
Remote control
• Remote Configuration with SMS
by authorised numbers
Positioning
• GPS positioning
• Network Positioning Support**
• Assisted GPS**
Task and work optimisation
Login / Logout
• By login and logout messages
the user identifies himself to the
service centre when starting or
ending a shift
• useful when the device has
multiple users or a user must
report for duty
• entered user-ids will not be
stored in the device
• user can enter additional
information after the ID
Task and work optimisation
Status Messages
- Detailed Reports
• Setting for simple / advanced mode
• VectroGuard button configured to send predefined
status messages
• Message for working routines and tasks
• Pull-down list of nine pre-programmed messages
• Before sending, additional information can be added
Task and work optimisation
Tracking
- Automatic Position Updates
• The device can be programmed to send its position
automatically
• Activation can be done from the device or from the
service centre
• Trigger for remotely activated tracking can be for
example speed, time or area
• Activation from Service Centre overrides local
settings
Task and work optimisation
Area Tracking
Geo Fencing
• Track can be enabled to send its position when
entering or leaving an area
• Can activate tracking based on allowed area
• Area is limited by a radius around a point
Task and work optimisation
Navigation and Route point
• The route is created and sent by the Service Centre
• Route can be activated or deactivated also from the
device itself
• The route point has a center point and a radius
• One route programmed at a time
• A position message can be sent to the Service
Centre when arriving inside the radius of the route
point
• Route points can be skipped from menu
• Navigation screen
Task and work optimisation
Send Position
• Send position sends the last known
GPS position to the Service Centre
• User can add additional information
to the message
• User has also the possibility to
freely select the number where the
message is sent
Task and work optimisation
Location Request
• Service centre can locate the VectroPhone Track by
sending a location request message
• The response always provides GPS co-ordinates,
despite the validity of the information
• Position information will be automatically sent to the
requesting number if the number is authorised
• If the service centre number is defined but
authorisation is entirely disabled, the response
however, is always sent to the service centre
number
• If the request comes from an unauthorised number,
the user is prompted either to accept or to refuse it
while also showing the number from where the
request is coming from.
Task and work optimisation
Location History Request
- Knowing the Past
• Service Centre can request old positions in order to
get information on the route travelled
• One SMS reply message can contain 7 positions
• Position history can also be sent completely via
data call
Case: Repair work not
completed as required
Repair route, start
Service Centre:
The route yesterday with
unplanned short cut
Destination
Task and work optimisation
Refresh Position
• Refreshes the position when needed
• Can be useful when the GPS has entered into sleep
mode or is switched off
• After the refreshing procedure the GPS will return to
previously configured mode. This happens also
even if update of the position was not possible
Emergency and Safety
Emergency Call/SMS
• VectroGuard button configured for emergency use
• Emergency Call/SMS contains both GPS coordinates and GSM network position
• Ending the emergency call requires a long press on
the END-call key.
• Emergency centre number can be hidden
• Automatic resend if no answer
Emergency
message
Service centre:
GPS position is 2 hours old,
but he is in the storehouse
Emergency and Safety
Condition Check
-"live-man-check"
• If so configured, the user must press the
VectroGuard button at specified intervals
• In each confirmation the current position is sent
• User must add personal ID code to the message
• ID is not checked in the phone, but must be
interpret in the Service Centre
• When the timer is running out an alarm will be
initiated before sending the message.
Communication
Professional Mobile Group
“Walkie-Talkie in GSM”
• Track operates like PMR devices over GSM
• Group calls require management by a third party
management server
• Make a normal GSM call from phone point of view
• VectroGuard as Tangent, press to talk
DDI or EXTN
Group Call
feature
Dispatcher
Redial to DDI or EXTN
Remote configuration
Remote Configuration
OTA service
• Remote update of phone configuration by service centre
• Update can include:
– telematics settings
– GPS mode
– phone numbers related to telematics
MPTP
via
SMS
Service
centre
Positioning technology
GPS positioning
• GPS ; satellite positioning is based on a system maintained by the
US Military
• There are 24 active satellites in the sky and the GPS-receiver in
the VectroPhone Track Pro is able to receive signals from the
satellites
• The position determination works outdoors and takes place once
the device receives signals from at least three suitably positioned
satellites (first fix requires usually four satellites)
• The accuracy of the position depends on the satellite coverage,
which is affected by solid objects and weather; e.g. cloudiness,
snow, surrounding tall buildings and heavy tree cover
• The accuracy of the GPS positioning is about 10 meters
• The position is represented as co-ordinates, e.g.
N 21°45‘27” E 21°45‘27”
• The system shows the position as a point on a map
Positioning technology
Network Positioning Support
• The VectroPhone Track is positioned primarily by
the GPS system
• Service centre can request the GSM network
parameters
• For calculation of the position you need a separate
server, available from VectroPhone Partners
• Accuracy of the position depends on the distances
between a base station and the device and between
different base stations
• Accuracy of the network positioning is at its best
about 100-400 meters and the positioning also
works indoors
Positioning technology
Assisted GPS
- fast initial position
• Track has capability to receive assistance to the
GPS receiver in order to quicken the initial position
calculation
• Requires a third party station server
• Used if the phone is lacking satellite coverage
• Assistance over the MPTP binary coded protocol
• Message will contain ephemeris and UTC time
• Rough position e.g. GSM network. (Cell-ID, CI-TA)
For more information
www.Vecpromtechnical-service.com