Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Austin Led Consultants Inc 815-A Brazos #326 Austin Tx, 78701 512 377-6052 http://atxled.com White Light PL-POE-Flood with motion detection Mode B with PoE repeater function Product Description - PL-POE-Flood-B This Floodlight is powered by Ethernet cable! You can now add motion controlled light anywhere – without the need for 110v wiring. Bright 8 watts of long lifetime LED lighting is activated by a Passive Infrared Receiver ( PIR ). This device allows two power feeds on one CAT-5e line. A camera power and data at 10/100 speeds, while the same Ethernet cable powers a bright white light. High definition IP Cameras can capture full color images instead of B/W infrared. PIR detection for motion activation of the LED light deters unwanted visitors. Since the PL-POE-Flood also has a male and female RJ45 – you can attach a PoE Camera and LED floodlight from the same CAT-5e cable up to 328 ft from the source. The attached 2nd device can be a Camera, a WiFi Access Point or a PL-AT-Flood for double the light. With Power over Ethernet there are two modes A and B. Mode A has power & data on pins 12 and 36 – this is for the attached camera or other 802.3af device. Mode B is power on pins 4,5 and 7,8. The PL-POE-Flood-B uses mode B for LED power, while passing Power & Data on mode A thru the device untouched, out to a camera, a WiFi-Access point or a PL-AT-Flood LED. This design allows 2 devices to share one CAT-5e line. Here is how this is done. Mode A from your PoE switch mode B from our passive mode B injector Your existing standard PoE switch supplies 48 or 56 volts DC for the device in mode A, and our PoE injector adds independent mode B power for the LED. Since these are on different pins of the RJ45 – it works well. With this method, our injectors from 1 to 24 ports are recommended for LED power on mode B, while 2nd device power comes from the PoE switch or injector on mode A pins. The mode A power source can also be any WiFi Texas brand device like the WT-GPOE wall mount or rack mount device Specifications Power source and 802.3af passthru 802.3af passthru output Input voltage range LED Power pins in Passthru Power and Data pins in Max Power consumption Input Current at 48v Motion Detection LED Color Temperature Operating Temperature Size RJ 45 female connector ( mode A and mode B input) RJ 45 male connector ( 802.3af mode A up to 25 watts) 15 cm between Male and Female connectors 36v to 57 volts +48v on 4&5 and -48v on 7&8 from passive PoE injector 1&2 and 3&6 from PoE switch – unmodified passthru 9 watts in for 8 watts of LED light 17 watts in for 16 watts of LED light 200 ma input delivers 8 watts to LED Passive PIR, adjustable Warm White, 4000 °K 0°C ~ 50°C 225 x 250 x 185 mm with 200 cm cord Daisy Chaining* To power more than one PoE-Flood from one CAT-5e line, use our WS-POE-8-ENC at the remote end, it will duplicate the Mode B power and let mode A thru. Or, you can use a WT-AF-Flood mode A device instead of the camera. * production model has 2 mtr cord with female and male RJ45 Motion Detection dials Clockwise = maximum Knob Min Max Sens 5 ft 35 ft Time 5 sec 120 sec Lux Night only Day and night Order information LED order codes – Mode B PL-POE-Flood-8w mode B PL-POE-Flood-16w mode B Description 8 watt – power on pins 4&5: 7&8 pass thru 1&2: 3&6 16 watt – power on pins 4&5: 7&8 pass thru 1&2: 3&6 Injectors - Flood + camera WS-POE-In-48v15w Add on to any switch Mode B Injector add-on for PoE switches for one Flood-LED, passthru mode A Multiport Injectors WS-POE-8-48v60w Add on to any switch Mode B Injector add-on for PoE switches to add 7 Flood-LEDs, wall mount, mode A passthru Mode B Injector add-on for PoE Switches to add 12 Flood-LEDs, rack mount, mode A passthru WS-POE-12-48v120w Single power injector LED order codes – Mode A PL-AT-Flood-8w mode A PL-AT-Flood-16w mode A Multiport Injectors Description 8 watt – power on pins 1,2: 3,6 802.3af switch compatible 16 watt – power on pins 1,2: 3,6 802.3at switch compatible Alternative Passive Injectors WS-GPOE-16-48v240w WT-GPOE-8-48v60w WT-GPOE-1A-48v15w For PL-AF-Flood in 802.3af mode A 16 port injector for up to 16 Iights at the same time. 8 port injector for up to 7 Iights at the same time. Single port injector ( or use any PoE switch )