Download Course Outline Word Document | AS/A level

GCE AS / A LEVEL ECONOMICS
Course Outline
The following two course outlines intend to help teachers in their planning. However, we must stress that there are many other
ways of organising the specification content, and these suggestions should not be seen as prescriptive. This outline assumes
learners will be taught for 4 hours per week. There may be slight differences with the timings due to the different term dates in the
UK.
Plan 1 assumes that learners will be entered for the AS examinations at the end of the one year AS course. Component 1 and 2 of
the AS specification is the same as Component 1 of the A Level specification. Plan 2 assumes that there will be no AS examination
at the end of the first year.
PLAN 1
TERM ONE
Specification
Content
Specification Amplification
Further guidance notes
1
Scarcity,
choice and
opportunity
cost
Define and illustrate the concepts of
scarcity, choice and opportunity
cost for society, individuals and the
government.
Introducing learners to the idea that resources (land, labour and capital) are
scarce, but there are unlimited wants; all societies have to make choices –
use of command versus free market systems to illustrate the way in which
choices are made and the different outcomes that may result.
2
Production
possibility
frontiers
Use production possibility frontier
diagrams to depict choice,
opportunity cost, short and long
Show that scarcity can be illustrated graphically using PPFs, giving an
explanation that they represent the limit to an economy’s output at a given
point in time with existing resources at existing factor productivity.
Week
1
(PPFs)
term economic growth and
efficiency.
Understand movements along and
shifts in PPFs.
Understand why the PPF is usually
drawn concave to the origin
because of imperfect factor
substitution and why a straight line
PPF is an indication of perfect
factor substitutability of resources.
Explain factors which may shift the
PPF inwards or outwards.
Relate long-term economic growth
and changes in productivity to
outward or skewed shifts in an
economy's PPFs.
Specialisation,
division of
labour and
exchange
Outward shifts and possible causes. Also, use as a link to specialisation
and division of labour and increasing efficiency of the production process.
Link to skewed shifts i.e. greater improvements in one industry than the
other.
Relate PPFs back to the discussions of market systems, to show that the
different choices systems made can be represented two dimensionally (e.g.
capital vs. consumer goods balance – UK vs. USSR), and then show that
over time, these changes may have implications for shifting the PPF. Also,
use this as a link to economic growth (actual and potential), unemployment
and trade, and use this to discuss how short term decisions on resource
utilisation may have longer term implications.
Link to opportunity cost, as a concept and diagrammatically.
Inward shifts reflecting depletion of resources e.g. Ebola in West Africa,
War in Syria.
Understand the advantages and
disadvantages of specialisation.
Refer to specialisation by countries, by regions and individuals in the
workplace.
Define productivity and explain how
it may be increased by the use of
specialisation and other factors.
Examine why exchange is an important consequence of
specialisation/division of labour i.e. countries/people cannot be entirely selfsufficient. Link to money being used as a medium of exchange, rather than
relying on barter.
2
3
Factors
influencing
demand and
supply in
product
markets
Define a product market.
Explain the objectives of economic
agents; that firms seek to maximise
profits and consumers seek to
maximise satisfaction/utility.
Demand:
Recap on how markets allocate resources, and the notion of supply and
demand. Explain that all this can be illustrated graphically.
Concept of demand as effective demand (desire for a product supported by
the ability and willingness to pay). Factors affecting demand (income, price,
tastes, prices of substitutes and complements – anything the learners can
come up with).
Understand the importance of
marginal utility in the derivation of
demand curves.
Look at the principle of diminishing marginal utility as a good way of
explaining why demand curves slope down, and a useful tool to explain
consumer surplus.
Identify the main influences on
demand and supply in product
markets.
Understand the substitution and income effect of a price change.
Big effort on shifts vs. extensions in demand, looking at the importance of
the ceteris paribus principle.
Understand why demand curves
normally slope downward from left
to right.
Supply:
Introduction (usually via an activity) of the Law of Diminishing Marginal
Returns. Then linking this to increasing marginal costs and the upwards
sloping supply curve.
Understand why supply curves will
normally slope upward from left to
right, for example producers will be
able to make higher profits at higher
prices and that higher levels of
output mean increased marginal
costs in the short run.
Make it completely clear that if supply curve has a positive gradient, then
suppliers will not increase supply without an increase in price due to
inability to cover costs, even if demand is present.
Factors affecting supply (costs, technology, natural factors, etc.).
At this stage, it might be useful to look at vertical and horizontal supply
curves to reinforce the idea of demand not creating supply. (Music
3
downloads and fixed capacity events such as concerts can be used as
clear examples).
Big effort on shifts vs. extensions in supply.
4
The
determination
of equilibrium
price and
output in a
freely
competitive
market
Illustrate, using diagrams,
equilibrium price and output
situations in product markets.
Equilibrium:
Concept of equilibrium as a situation with no tendency to change. Reason
why market prices will tend towards equilibrium. Refer to concepts of
excess demand (shortages) and excess supply (gluts).
Explain effects on price and output
of shifts in demand and supply
curves
Detailed discussion of each possible disruption to equilibrium (shift left/right
in D/S) and exactly how a new equilibrium arises, again emphasising that
prices will not start to change until excess demand or supply has arisen.
Use of real world case studies as exercises.
Link back to market economies and the invisible hand – show that markets
are efficient, and then link into consumer, producer and community surplus.
5
Consumer and
producer
surplus
Define, explain and illustrate, using
diagrams, consumer surplus and
producer surplus.
Demonstrate that in principle those who are prepared to pay the most are
those who get supplied, and that the most efficient firms are the ones who
do the supplying. Calculations to illustrate the concepts.
6
7
Price, income
and cross price
elasticities of
demand, price
elasticity of
supply
Understand the meaning of the
terms price, income and cross price
elasticities of demand and price
elasticity of supply.
General introduction to the idea of Elasticity (the responsiveness of one
variable due to a change in another variable) – ensuring that learners
understand that it is %-based and therefore it will change for given
relationships and it is not the gradient.
Explain the relationship between
price elasticity of demand and total
revenue.
All elasticities to be covered in much the same way:
 Definition
 Formula
 Simple calculations
 Explanation of the significance of both the negative sign and the
Use the concept of income elasticity
4
to distinguish between normal and
inferior goods.
Apply the concept of elasticity to
economic contexts for instance in
the incidence of taxation and the
incidence of subsidies.





absolute value in predicting change
Graphical representation (e.g. Engel’s curve for YED)
Factors that affects the value
Considering the extremes (e.g. perfectly inelastic PED, PES)
Considering real-life case studies that illustrate the various elasticities
Explain why knowledge of that particular elasticity is important to
decision making in firms (e.g. XED can signal the use of loss leaders
as an example of how firms might use XED for complements, and
discuss advertising and product differentiation as ways to decrease
XED between substitutes).
In addition, there must be some reinforced explanation that PED varies
along a straight line downward sloping demand curve, with PED = -1 at the
midpoint. Use this to illustrate the use of PED for firms – when demand is
price elastic, firms can increase revenue by cutting price – show on
diagram. Learners should to conduct calculations of revenue with simple
numbers.
8
How resources Understand the role of profit and the
are allocated in function of prices in allocating
a free market
resources to different uses.
economy
Understand that changes in one
market affect other markets, for
instance interrelationships between
factor and product markets.
Revisiting the topic of how markets allocate resources, and the notion of
supply and demand.
Look at the rewards to different factors of production – profit as the reward
for entrepreneurship.
Concept of derived demand to be used again – demand for a particular
product will lead to demand for factors to produce that product.
In particular, some recap of why markets in theory should allocate
resources efficiently (community surplus maximised, competition holding
down prices and costs, raising quality, consumer sovereignty/choice,
invisible hand).
5
Understanding
market failure
9
12
Why and how
governments
intervene in
markets AND
also the effects
of government
intervention
Define market failure and have an
understanding of efficiency i.e. the
maximisation of consumer/producer
surplus at the free market
equilibrium output.
Situation in which the free market does not allocate resources optimally.
Understand that market failure may
take many forms, including:
• public goods
• merit and demerit goods
• externalities
• information asymmetries and
gaps
• an absence of private property
rights
• income inequality
• volatile prices
Public goods: Non-excludable and non-diminishable i.e. non-rival. Free
rider problem means that they would not be supplied in a free market
leading to a welfare loss. Touch on cost-benefit analysis and the difficulty of
putting economic values on concepts such as human life.
Appreciate the reasons for,
and the consequences of each
source of market failure for
economic agents.
Explain why and how governments
intervene in markets, for instance to
correct market failure and reduce
income inequality.
Optional: Diagrammatic approach – focussing on over-allocation or underallocation of resources to a market and the welfare loss that occurs as a
result.
Inequalities: Explanation that whilst in theory the market will deliver goods
to those who want them the most as long as incomes are equal, income
inequalities mean that resources will instead go to those with the most
money, therefore reducing total welfare. Causes of inequality – possible
link to labour market diagram, labour immobility
(geographical/occupational).
Link here to Maximum Price as a means of ensuring low-income
households are not priced out of the market. Evaluative discussion to
follow including problems such as excess demand, possibility of
black/unregulated markets emerging, the impact on producer revenue and
also on producer and consumer surplus.
Externalities: Cost or benefits to third parties arising from production or
consumption that are not taken into account by the free market, meaning
that equilibrium output will be either too high or too low – thus a
misallocation of resources due to the divergence between social cost and
private cost. SC = PC + EC.
Production externalities: (pollution from production and so on).
Consumption externalities: merit and demerit goods. Case studies on
health, education, tobacco, alcohol and cars/roads, using social
6
Evaluate government intervention
policies.
cost/benefit analysis and simple supply and demand diagrams where
appropriate to illustrate over/under consumption.
Link to Minimum Price as a means of solving the demerit good problem.
Link to indirect taxes (including the burden of tax diagram) as a means of
solving negative externality problems.
Explain that in certain cases
government intervention can create
distortions in markets, for example
in agriculture, housing and labour
markets
Understand the reasons for
government failure and be able to
evaluate its effects.
Link to subsidies as a means of solving positive externalities/merit good
problems.
Information asymmetries: Lop-sided information can damage markets
and in extreme case render them unable to operate at all. Use of used cars
(lemons) and private health insurance as examples.
Common goods: Absence of property rights – where assets do not have
clearly defined owners then a price cannot be established and they will be
over-used. Tragedy of the Commons, overfishing of cod as case studies.
Price volatility: Volatile markets are inherently risky and therefore
dissuade entrepreneurs from entering the market. Primarily taught via
agricultural goods (needs an explanation of why agricultural products are
more likely to exhibit volatile behaviour). Refer to price inelastic demand
and supply. Then, link to CAP and Guaranteed Minimum Price Scheme
(including diagram). Disadvantages of intervention in this fashion –
opportunity cost of funds, cost of storage, impact on consumer surplus,
dumping of surplus produce on world markets (e.g. impact of US powdered
milk production on Jamaican dairy industry), drive towards intensive
farming methods and the environmental and health side effects that these
create.
7
Government failure:
The risk of government failure (such as inadequate information,
administrative costs and market distortions) should be considered
throughout.
13
Labour Market: Identify the main influences on
Wage
demand and supply in labour
determination
markets.
Understand determinants of the
elasticity of the demand and supply
of labour.
Understand the causes and
implications of wage differentials.
Explanation of wages as the price of labour and that in a free market wages
are therefore determined by supply and demand.
Look at the demand for labour, discussing why firms need workers, and
what will determine their demand – link to technology, productivity, the
demand for products and thus the state of the economy. Labour is
therefore a derived demand and will be negatively correlated with wage
rates.
Identify the main influences on demand and supply in labour markets.
Optional: Marginal revenue product theory is not required at AS but
learners should understand that the demand for labour is derived from the
contribution that labour makes to the profit of the firm.
14
Labour Market
Issues:
Understand the factors which affect
flexibility in labour markets, for
example trade union power,
regulation, welfare payments and
income tax rates.
Evaluate the effects of the statutory
national minimum wage on labour
markets.
Make clear that labour supply consists of those actively looking for work
(not the supply of jobs). Again discuss the factors that will be likely to affect
this – wage levels, benefit levels, societal attitudes towards gender roles
(participation rates), migration, tax levels, education and so on. Hence
supply will be positively correlated with wages, but strongly influenced by a
range of other factors.
Look at factors that may cause wage levels to shift such as trade union
power, immigration following EU expansion, changes in the structure of
industry, globalisation and so on.
8
Explain the impact of migration on
labour markets.
Then look at Government intervention in labour markets – the minimum
wage. Recent history, advantages and disadvantages from the point of
view of individual firms and workers as well as for the economy as a whole
(possible unemployment, may deter FDI/increase relocation abroad, may
increase participation rate, may force firms to invest, may reduce income
inequalities).
9
TERM TWO
Week
Specification
Specification Amplification
Content
15
Government
policy
objectives
16
The circular
Explain the flows in the circular flow model
flow of
and understand that they should be equal
income model (income = output = expenditure).
Explain the main macroeconomic
objectives and possible conflicts between
policy objectives.
Explain injections into and withdrawals
from the circular flow.
Further guidance notes
Introduction to policy objectives (unemployment, inflation, growth
(actual/potential), current account) and policy instruments (fiscal,
monetary, supply side). Explanation of why each policy objective
might be important and an overview of some of the factors that might
affect them. Opportunity to look at some recent economic stories and
get learners looking at current data.
Circular flow model introduced through an activity.
Focus on the assumptions of the model and Y=O=E formula. Then,
introduce concepts of injections and withdrawals, and the impact of a
change in these on policy objectives.
Show how the multiplier is derived from circular flow.
Use the model to explain the concept of
national income equilibrium and to explain
how changes in injections and withdrawals
might lead to changes in the equilibrium
level of national income, and hence explain
the multiplier process.
17
18
The
components
of aggregate
demand (AD)
and the AD
function
Define the components of aggregate
demand: consumption, investment,
government spending and net exports
(exports minus imports).
GDP/GNP
Using circular flow model, build idea that the economy will be in
equilibrium if AD = AS, followed by components of AD (C+I+G+X-M).
10
Explain the factors which affect the levels
of consumption and investment in the
economy.
Consumption:
Definition (total expenditure by UK households). Significance of
consumption as part of AD – use of actual data to show that C is over
60% of AD.
Understand why an AD function will slope
downward from left to right.
Understand that changes in the
components of AD can cause the function
to shift.
Factors affecting consumption (national income, interest rates, tax,
confidence/feel-good, house prices/equity withdrawal, availability of
credit – link to contemporary examples in each case). Impact of
changes on policy objectives, still at a superficial level.
Investment:
Definition of investment (public/private, gross/net,
human/physical/R&D). Significance of investment in terms of impact
on productivity, competitiveness and potential growth (PPF analysis).
Lead into factors affecting investment (private sector) – Interest rates
and business confidence (MEC theory – optional), taxes (esp.
corporation tax), tax breaks, profits, rate of technological change,
access to funds – role of stock exchange, pressures from
globalisation.
AD:
Relationship between aggregate price level and AD (real balance
effect). Shifts and extensions in AD – factors affecting - C and I plus
role of state and X/M (introduction to exchange rates). Again, look at
how changes in AD are likely to affect policy objectives.
11
19
The
aggregate
supply (AS)
function
Understand the shape of the Keynesian
long run aggregate supply (LRAS) curve.
AS:
Idea of AS representing the maximum potential output of the
economy – link back to PPFs.
Determined by the quantity, quality and efficiency of use of the four
key factors of production.
Keynesian AS – elastic at low output because as AD rises there are
no shortages of skilled workers/other factors of production. As the
economy approaches full employment shortages of factors will
appear in particular sectors of the economy, driving up costs and
therefore prices. At full employment, further increases in AD are
purely inflationary.
Note: Classical / Monetarist AS curve introduced at A level.
Understand the factors which might result
in a shift in LRAS.
Show how changes in quantity, quality and efficiency of use of factors
can shift AS, pick examples in terms of all 4 factors – training,
investment, relaxation of planning controls, decrease in corporation
tax and so on).
20
AD/AS
analysis
Illustrate and explain how AD and AS
interact to determine the equilibrium level
of output, employment and prices in the
long run.
AD/AS:
Equilibrium. Use of AD/AS analysis to explain policy objectives and
conflicts between them. Impact of changes in C and I on equilibrium
price and output in the SR and LR and hence the link to policy
objectives.
21
Fiscal policy:
the
Framework
and Demand
Understand the overall purpose and
structure of the budget.
Introduction to the budget – surplus, deficit, balance. Link to the
national debt and government bonds/credit ratings. Current UK
position on both, looking at recent budgets. Why a surplus or deficit
might matter.
12
side fiscal
policy
Keynesian vs. Classical views on the role for a budget deficit.
Analyse the possible impact of changes in
tax and spending on the economy using
AD/AS diagrams and the Laffer curve.
Explain how Keynesian economists believe
that fiscal policy can and should be used to
control the level of aggregate demand in
the economy under certain circumstances.
Government spending: Current vs. capital spending. Impact of each
on AD/AS in the SR and LR.
Taxation: Direct vs. indirect. Progressive, proportional, regressive.
Advantages and disadvantages of direct (incentives, impact on AD,
progressive, collection) and indirect taxes (regressive, avoids
disincentives, targeting of demerit goods, inflationary impact), and
their impact on the economy. Link between direct tax rates, tax
revenue and incentives to work/brain drain – Laffer Curve. AD/AS.
22
Supply side
fiscal policy
Explain that fiscal policy can be used to
achieve policy objectives by operating on
the supply side in the longer term.
Examples might include influencing
incentives to work and to invest, improving
infrastructure.
Focus on raising productivity/creating incentives. Disadvantages of
demand management – leads and lags, build-up of debt/opportunity
cost – debt interest, risk of destabilisation, side effects on incentives,
etc. Examples from recent budgets. Diagrammatic treatment.
23
Monetary
policy:
Framework
and the
operation of
monetary
Understand the role of the Bank of England
in creating monetary and financial stability,
and its status as lender of the last resort.
Role of the (independent) Central Bank and the Monetary Policy
Committee. Explanation of money and the money supply, the Bank of
England’s inflation target and how interest rates will be set to achieve
this.
Understand the purpose of the Bank’s
inflation target, its symmetrical nature and
13
policy and
monetary
stability
any other objectives that the Bank may be
required to pursue.
Interest rates.
Understand how changes in interest rates
may be used to achieve the Bank’s
objectives and the factors the Bank is likely
to take into account when setting base
interest rates.
Understand how interest rate changes can
impact the both real economy and inflation.
Discuss the extent to which changes in
interest rates are likely to affect the
exchange rate.
24
Supply side
policies
Understand what is meant by supply side
policies and understand how they can be
used to try to increase trend growth/LRAS
in the economy as well as the flexibility of
product and factor markets.
Impact of a change in interest rates on AD/AS (via the Transmission
Mechanism) and hence on policy objectives including inflation and
the time horizon over which interest rates will be expected to have an
impact.
Advantages and disadvantages of interest rates as a tool for demand
management (flexibility, ability to make a series of incremental
changes, but effectiveness in boom/recession scenarios, side effects
on investment and the exchange rate.
Definition – improving flexibility of markets, increasing trend growth
via an increase in the quantity, quality and efficiency of use of the 4
factors of production.
Types of supply side policy divided into labour, product and capital
market reforms, with examples of each.
Benefits: Increased productivity and efficiency leading to potential
growth, downward pressure on inflation, possible jobs and
improvement to current account policy. Helps to avoid short-run
trade-off of policy objectives caused by demand management alone.
Limitations: Unemployment (possibly structural), increased
14
inequalities, time lags, opportunity cost, limited effectiveness in
recession (Keynes), potential for government failure, less security of
employment in labour markets etc.
25
Free trade
and
protectionism
Evaluate the benefits and costs of free
trade.
Reasons for trade. Look at case studies of the impact trade has had
on economic growth and living standards (main case study on China)
and consuming outside PPF, liberalisation leading to increased
efficiency, potential growth, downward pressure on inflation, lower
prices and great choice/quality for consumers.
Reasons against free trade/in favour of protectionism - strategic
industries, infant industries, prevent dumping, cultural factors,
revenue raising (tariffs), protect jobs, solve current account deficits –
look at the extent to which these arguments are actually valid and
whether even so they are likely to outweigh the benefits of trade.
Describe the main forms of protection;
tariffs, quotas and other barriers.
Evaluate the benefits and costs of
protectionism.
26
Exchange
Explain that in a free-float system, the
rates in a free exchange rate will be determined by the
market
forces of supply and demand.
Use supply and demand diagrams to
analyse and evaluate the factors which
might cause exchange rates to appreciate
or depreciate.
Forms of protectionism (tariffs, quotas, subsidies, administrative
barriers, exchange controls, ‘precautionary bans’, voluntary export
restraint etc., looking at actual cases (such the Banana Wars and the
bra wars, US subsidies on Cotton).
Definition of exchange rate.
Demand for sterling: Exports plus capital inflows (hot money +FDI).
Negatively correlated with exchange rate.
Supply of sterling: Imports + capital outflows. Positively correlated
with exchange rate.
Equilibrium (S=D).
Factors causing changes in equilibrium: Changes in interest rates,
15
trade balance, confidence, expectations.
Evaluate the possible impacts of changes
in exchange rates on the policy objectives.
Evaluate the microeconomic effects of
exchange rate changes on households and
firms.
Impact of a change in exchange rates on the economy (SR/LR).
Link to policy objectives; in particular, showing that a depreciation
may have mixed impact on the trade balance in the short and long
run (Marshall-Lerner condition). In addition, whilst this may decrease
unemployment and increase growth, it might cause inflation (if the
output gap is small) and reduce living standards (if consumer goods
are generally imported).
Look at current examples of currency crisis such as collapse of
Russian Rouble (Nov/Dec 2014).
27
Exchange
rate policy
Understand how monetary authorities can
influence the value of an exchange rate in
a floating system
(a ‘managed’ or ‘dirty’ float).
Look at some of ways in which Governments can control interest
rates (setting i/r, buying/selling currency on FOREX, Capital controls).
Evaluate the advantages and
disadvantages of policies which hold
exchange rates artificially above or below
their free market levels.
Look at why Denmark pegs its currency to the Euro. ERM II for
prospective euro zone members.
Look at why Brazil over-valued its currency in the 1970s.
Look at why China devalues its currency (and how it does so).
16
TERM THREE
Week
28
Specification
Specification Amplification
Content
Further guidance notes
Trade
(continued)
Advantages
and
disadvantages
of free trade
Understand the advantages and
disadvantages of international trade from
the point of view of the economy as a
whole and for households, firms and
government.
Mainly revision: Look at the reasons for trade, including detailed
analysis of comparative and absolute advantage. Explain with
arithmetic illustration the concepts of comparative and absolute
advantage and their limitations; a two country, two product model is
required using a numerical and graphical approach.
Protectionism
Understand the arguments for and against
the implementation of protectionist
policies.
Then look at the problems with free trade and the main forms of
protectionism. Tariffs, quotas, export restraints, non-tariff barriers.
Look at the role of the WTO in trying to reduce protectionist barriers.
Explain and illustrate key methods of
protectionism.
29
Globalisation
and Trade in
the UK
Evaluate the costs and benefits of
globalization.
Identify the UK’s major export sectors.
Evaluate the extent to which an
increasingly integrated world economy is
beneficial to the UK.
Discuss what is meant by globalisation and the positive and negative
effects it has had on the UK (might include: FDI, downward pressure
on inflation in the short run increased growth, but now growing
pressure on resource prices as China grows, short run job losses and
so on).
Learners should gain an understanding of the impact of globalisation
on the UK economy through an appreciation of its interdependence
with other economies, linking well with discussions on UK’s main
trading partners.
17
30
31
REVISION
AS EXAMINATIONS
32
Economic
development:
Measurement
Understand what is meant by the
concept of economic development.
Look at the characteristics of some of the world’s poorest countries, and
discuss what might make a country more or less developed.
Evaluate the extent to which
changes in national income are a
good indicator of changes in the
level of development in a country.
Human versus economic development.
Identify and understand other
possible measures of economic
development, including:
•
Move on to classification of countries (LEDC/MEDC or least developed,
developing and developed). Look at possible indicators of development and
their limitations such as GDP/capita, HDI, infant mortality rates, and
infrastructure.
the human development index
(HDI) – understand how the
index is calculated and be able
to discuss the extent to which
the HDI can show differences
in economic development
•
the economic structure of an
economy
18
•
33
34
Obstacles
Solutions
more indirect indicators such
as access to health and
education, access to the
internet and mobile phone
usage.
Discuss why LEDCs may face
difficulties in competing with MEDCs
and in raising their level of economic
development.
Then discuss possible reasons for lack of development of some countries
(using case studies in each case).
Explain and evaluate relevant
obstacles; including: the extent to
which endowment with natural
resources is beneficial or whether
there is a ‘resource curse’,
low levels of health and education,
low life expectancy, the impact of
MEDC trade policies, the impact of
poor levels of infrastructure, capital
and technology, the effect of
institutional weakness and poor
governance, high levels of public
sector debt and rapid population
growth.
Possible obstacles might include: primary product focus, second mover
disadvantage (power of western multinationals), lack of infrastructure
(financial, health, education and physical), corruption, rapid population
growth, external debt, trade deficits, poor education and health (AIDS),
Western protectionism.
Explain and evaluate possible
approaches to raising the level of
economic development; including:
liberalisation – a move towards a
Discuss possible approaches to raising economic growth, with a strong
emphasis on case studies throughout (again!).
Make it clear that the reality is very different for each developing economy,
and that a tangled web of interconnected problems makes
development/growth difficult. Each obstacle should be linked to a clear
case study which learners can research in their own time.
World Bank/IMF approach in terms of liberalisation/structural adjustment
19
more free-market based system
involving internal and external
liberalisation, international aid, debt
relief, government intervention in the
form of policies such as import and
export substituting industrialisation
and encouraging FDI.
(strengths and limitations of such an approach). Other approaches
including ISI, export targeting, debt relief/amnesty, aid, decrease in
Western protectionism plus the limitations of each of these approaches.
Discuss the extent to which any one policy will be sufficient to improve the
performance of a developing economy, and generate an awareness that
solutions are likely to be at many levels within and outside an economy.
20
TERM FOUR
Week
1
2
Specification
Specification Amplification
Content
Short-run
costs,
revenues and
profits
Explain the law of diminishing
returns.
Distinguish between fixed and
variable costs and be able to
distinguish between the short run and
the long run.
Define and calculate total, average
and marginal values for revenue and
costs.
Explain the concept of profit
maximisation (using marginal
revenue and marginal cost).
Further guidance notes
After a very quick overview of the whole topic, move on to an explanation of
the short run (given that the firm is constrained by at least one of its factors,
expanding output will become increasingly difficult, and that, therefore, the
cost of making an additional unit will begin to rise). Principle of diminishing
returns to a factor – explain and then demonstrate using MPP and APP
diagrams.
Can then make the link to costs. Explain that there are fixed costs
(remaining constant as output rises) and variable costs (rising in total as
output rises).
Explain the difference between MC and AC - explaining why each one is
important.
Following this, make the link between diminishing returns and rising
marginal cost using anecdotal, diagrammatic and numerical examples.
Show that total variable cost is the sum of marginal cost. Hence derive the
average variable cost curve, showing diagrammatically and numerically
that the MC will cut AVC at the minimum point of the AVC curve.
Finally introduce fixed costs. Show that TFC is a horizontal line, but that
AFC will fall as output rises. Explain the importance of AFC in industries
such as low cost airlines. Then show that ATC/AC is made up of AVC and
AFC – show on diagram, demonstrating that ATC = AVC + AFC and that
MC will pass through the minimum points of the AVC and ATC curves.
Repeat for revenue curves – using the previous work on PED as a way of
21
building a TR curve. Then use differentiation (Optional) to build a MR
curve from TR (marginal is the first differential/gradient) of Total. And show
that MR will always have twice the gradient of AR.
3
4
Long-run
Costs and
growth of
firms
Background
to market
structures and
idea of
efficiency
Understand how and why firms might
grow (internal and external growth).
For Long-Run Costs, one could begin with the idea that in order to escape
inexorably rising costs, a firm may need to expand. Explain that growth
could lead to internal economies of scale, and illustrate with examples (bulk
purchase, financial, managerial, etc.). Demonstrate, showing the transition
from one SRAC to another lower one, and hence derive the LRAC curve.
Understand types of
integration/mergers (horizontal,
vertical and conglomerate).
Could now introduce the idea that firms may grow in different ways. Look at
the difference between internal/organic growth and external growth
(vertical/horizontal/ conglomerate) look at possible reasons for all in the
context of case studies.
Explain and illustrate internal and
external economies and
diseconomies of scale.
Advantages and disadvantages of each, linking to the possibility of internal
diseconomies of scale if growth is not managed effectively. Illustrate using
SR/LRAC analysis, and look at possible sources of internal diseconomies
(e.g. communication, co-ordination, control, motivation). Discuss whether
diseconomies will truly arise in practice and look at evidence.
Possibility of external economies and diseconomies of scale. Illustrate with
diagrams.
Explain that the structure of a market
depends on the number of firms and
their ability to enter and exit markets
freely (contestability).
Introduce the idea of different market structures as a spectrum showing two
extremes of highly competitive (not very concentrated) to very little/no
competition (and highly concentrated). Plot PC and monopoly on the
extremes.
Define the concepts of productive
and allocative efficiency.
22
5
6
Perfect
competition
Define perfect competition and
explain the importance of its
underpinning assumptions.
Explain and illustrate with diagrams
the short run and long run equilibrium
price and output for the firm and the
industry.
Explain and evaluate the efficiency of
perfectly competitive markets –
identify points of allocative and
productive efficiency.
Understand the difference between
normal and abnormal profit.
Explain the point of perfect competition (point of reference, the most pricecompetitive market structure possible, hence giving an idea of how to make
markets more competitive). Discuss the assumptions necessary to create
such a market (including: identical products, perfect knowledge,
contestability, many buyers and sellers).
Show that for a firm in such a market, an increase in price would cause
demand to fall to zero, and that, therefore, the demand curve will be
perfectly elastic. Explain the concepts of MR and AR, and show that these
will be horizontal at the industry equilibrium price. Dynamic analysis i.e.
changes in market D/S lead to changes in AR/MR for the firm.
Discuss briefly objectives of firms, and explain that profit maximisation will
be assumed for now.
Explain the difference between normal and abnormal (supernormal) profit.
Bring MC and MR together into a diagram, and show that profits will be
maximised at the output at which MC = MR. Then introduce AC into the
diagram and illustrate SR and LR equilibrium, with reference to the industry
(S + D diagram) showing that abnormal profits may be possible in the short
run. Show that industry supply is the horizontal sum of the individual firms’
MC curves.
Show that in the long run, entry and exit will return profit levels to normal.
Show that in the long run, perfect competition will be productively (min AC)
and allocatively efficient (demonstrate allocative efficiency via the industry
diagram), showing that because S=D, then MC=AR, and that therefore all
units which we are prepared to pay more for than they have cost to
produce have been supplied.
23
6
7
Monopolistic
competition
Define monopolistic competition and
explain the importance of its
underpinning assumptions.
Explain that monopolistic competition is closely related to perfect
competition, but that some of the assumptions of perfect competition have
been relaxed, most importantly the assumption of identical products.
Explain and illustrate with diagrams
the short run and long run equilibrium
price and output for the firm.
Show that as a result of brand loyalty, the demand curve will not be
horizontal and that therefore there is now a difference between AR and
MR. Revisit previous teaching to show (again), both numerically and
diagrammatically, that the MR line will be twice the gradient of the demand
curve/AR line.
Explain and evaluate the efficiency of
monopolistically competitive markets.
7
8
Monopoly
Define monopoly and explain the
importance of its underpinning
assumptions.
Compare, using diagrams, the short
run and long run equilibrium positions
in perfect competition with those of
monopoly.
Explain and evaluate the potential
costs and benefits of monopoly, for
example, price discrimination, lack of
contestability, efficiency against the
benefits of economies of scale and
natural monopoly.
Show short run and long run equilibrium in monopolistic competition,
showing that in neither case will there be either allocative or productive
efficiency. Explain that advertising and product differentiation will form an
important part of competition in such markets.
Explain that in theory monopoly is a market with a single firm dominating
the market, but that examples of pure monopoly are rare (e.g. water
firms/Network Rail). Hence in reality, we need to look at market
concentration, and the broad concept of monopoly power.
Discuss the conditions necessary for monopoly power to become
established (cost structure, entry barriers), and look at the characteristics of
monopoly. Show that as a result of entry barriers, abnormal profits can be
earned in the short and long run.
Barriers to entry – look at the forms of entry barrier e.g. legal – licences,
patents. Trademarks, resource based – vertical integration, retained
abnormal profits, cost based – economies of scale, first mover advantage
and strategic – advertising, product differentiation, research and
development, limit pricing.
Recognition that some entry barriers are structural and some are
24
strategic/behavioural.
Disadvantages: such as; allocative, productive, X inefficiency, reduction of
choice, higher prices and loss of consumer surplus. Possible loss of
dynamic efficiency. Price discrimination (although can be beneficial under
certain circumstances).
Advantages: may include; internal economies of scale may lead to lower
price than (say) perfect competition hence improving international
competitiveness, natural monopoly argument, presence of abnormal profits
might lead to greater innovation (but incentive to do so?), dynamic
efficiency. Network advantages (benefits of the dominance of
Windows/Office as industry platform), avoids some of the problems of
competition such as corner cutting, nationalised monopolies free to pursue
social objectives).
Evaluation: the extent to which monopoly might or might not be beneficial is
likely to depend on the threat of competition (not necessarily the presence
of competition) and that the UK competition/regulation framework is to a
degree predicated on this assumption. Also most dominant firms are also
plcs, so the extent to which they can remain inefficient may be constrained
by the need to deliver returns to shareholders). Regional/national/
international monopolies.
9
Oligopoly
Explain the main features of
oligopolistic markets and the concept
of interdependence.
Explain that oligopolistic markets
may be characterised by price and
non-price competition, price
Look at the characteristics of competition between real-world firms, and
show that oligopolies may be characterised by different levels of
competition depending to a degree on the level of concentration in the
market (look at concentration ratios as a measure of the extent of
monopoly power).
Look at and explain the characteristics of oligopoly (especially
25
leadership, collusion and price wars.
Explain and evaluate the potential
costs and benefits of oligopoly.
Use game theory to evaluate
interdependent behaviour in
oligopolistic markets.
interdependence and uncertainty). Explain that as a result firms may be
reluctant to change prices (explain using kinked demand curve and game
theoretical approaches in particular Prisoners Dilemma). As a
consequence, firms are likely to compete for market share through nonprice competition. Look at forms of non-price competition in a range of realworld markets such as retail petrol (location, product differentiation,
advertising, research and development and so on).
Explain that as a result of interdependence and uncertainty, firms may seek
to reduce uncertainty through collusion. Look at cartels that have been
fined by the European Commission, look at the reasons for and the stability
of collusive agreements (again using game theory) and look at the UK/EU
approach to dealing with collusion. (whistle-blower approach – those
confessing to collusive activity are spared fines).
To summarise the topic, introduce learners to the idea of Game Theory and
use a simple Prisoner’s Dilemma matrix to test the choice of: decreasing
prices (cheat on your partner) or keep price the same (stay silent). Ensure
that learners understand the term dominant strategy and can see where the
Nash equilibrium will be and, therefore, the likely impact on an oligopolistic
market structure.
10
Business
objectives
Business objectives
Explain that although up to this point we have assumed profit maximisation,
in reality this may not be the most realistic assumption behind firms’ actual
behaviour.
Link to nationalised industries and look at their likely objectives, then move
on to look more closely at profit maximisation, in particular the weakness of
a simple short run maximisation approach. Then look at the nature of plcs,
and discuss the possibility of the divorce of ownership from control. Discuss
the extent to which managers might be free to pursue their own objectives
26
– shareholders as a limit to freedom of managers. Case Studies to be
used throughout.
If managers are free to follow their own objectives, what might these be?
Look at sales revenue maximisation, market share and satisficing, together
with the reasons for each. Illustrate revenue maximising and sales
maximising levels of output on the diagram. Alternative objectives that
cannot be analysed diagrammatically e.g. social responsibility. Discuss the
extent to which profit max is the most likely/ desirable objective.
11
12
Privatisation
Explain the way in which privatisation
may increase competition.
Evaluate the effects of privatisation
on competition, efficiency, prices and
the whole economy.
Opportunity to look at the background to privatisation in the UK and other
countries (such as post-Cold War Russia and post-2009 Greece). Use the
examples to consider the key reasons for privatisation then and now (may
include, increased competition to raise productivity and promote growth
and international competitiveness, improve government finances through
asset sales, decreases expenditure on services (via contracting out),
reduced need to finance losses and raising corporation tax on profits of the
privatised firms (e.g. BG/BP, etc.), reduce trade union power, wider share
ownership), increase service levels and reduce prices for consumers.
Consider the dichotomy of state owned industry - whether to be resource
efficient (and make losses) or to be profitable (but not efficient).
Evaluate the extent to which this was true in the UK and in other countries.
Look at the limitations of privatisation (such as short run job losses
(steel/mining in UK), loss of natural monopoly, impact on safety/quality,
difficulties in introducing competition, loss of ability to follow social
objectives) and the rise of oligarchs in Russia.
Understand the reasons for renationalisation e.g. rail and energy as case
27
studies. Regulation of ex-nationalised concerns – use of watchdog bodies
to set prices (in some cases) and to regulate competition. Begin to look at
case studies such as water, rail, telecoms and gas.
13
Competition
policy
Explain the reasons why
governments may be concerned with
competition, monopolies and
mergers in industry.
Look at the UK/EU structure for regulation of monopoly power, in particular
the changed role of the
Competition and Markets Authority (CMA).
Understand the role of competition
authorities and regulators in
promoting competition and
contestability in markets.
There needs to be an emphasis on how the authorities seek to introduce
competition into markets (i.e. make them more contestable) and looking at
some specific case studies such as OFCOM and phone-hacking, CQC and
various NHS scandals, OFGEM and the profits of gas companies.
Explain that ex-nationalised industries have their own set of watchdog
bodies, owing partly to the difficulties of introducing competition into some
of these sectors such as water.
14
Market
Failure
(revisited)
Look back at the AS level material covered in this area, looking once again
at why a free market economy should in theory be optimal (in terms of
allocative, productive efficiency and so on), but that there are a number of
reasons why in reality this optimal allocation of resources might not be
delivered by completely unregulated markets.
Revisit how public goods, monopoly power, uncertainty and externalities
can reduce the efficiency of markets, and show how externalities may lead
to welfare loss (as a result of output no longer being socially efficient),
using MSC/MSB diagram.
28
TERM FIVE
Week
15
Specification
Content
The aggregate
supply (AS)
function and
Short run
aggregate
supply (SRAS)
Specification Amplification
Further guidance notes
Understand the shape of the
Keynesian long run aggregate
supply (LRAS) curve.
Revisit AS level material on the 4 key policy objectives, looking again at
how Keynesian AD/AS diagrams can be used to illustrate growth,
unemployment and inflation.
Understand the factors which might
result in a shift in LRAS.
At AS level, to allow maximum accessibility for learners, a simplification is
made based around the Keynesian LRAS framework. So that they can
study one macro model but also deal with key macro issues, the
horizontal/upward sloping section of the Keynesian AS is viewed as
representing costs whereas the vertical section represents capacity. Hence
supply side policies (for example) might shift AS right and down.
Understand why the SRAS function
is assumed to slope upwards from
left to right.
16
Long run
aggregate
supply (LRAS)
Understand why a SRAS function
might shift.
Neo-Classical view of AD/AS, introducing the concept of the SRAS
schedule as derived from MC analysis. Discuss the circumstances under
which an economy might self-stabilise (perfect product and labour
markets), and the obstacles which might exist in practice to such a process
(trade union power, minimum wage, monopoly power in product markets,
immobility of labour and so on). Derive the LRAS curve.
Understand that there are
differences between Keynesian and
Neo-Classical views on what the AS
curve will look like in the long run.
Keynesian versus Monetarist views on the appropriateness of fiscal,
monetary and supply side policies under different economic circumstances.
Consideration of sticky-wages and the view that markets do not always
clear.
Explain the Neo-Classical view of
the process through which an
economy might adjust to long run
equilibrium.
Opportunity for learners to undertake some thorough research on the
Keynes vs. Hayek debate, the appropriateness of austerity as a means of
emerging from a recession, and even looking beyond the specification into
other Schools of thought such as Austrian Economics and/or Marxism.
29
Understand that Keynesian
economists disagree with this
process of adjustment because of
issues such as inflexible factor
markets (‘sticky wage’, etc.) and
that, consequently, the LRAS
function may not be vertical at the
equilibrium level of output.
17
Unemployment
(revisited):
Measurement,
types, costs,
causes and
solutions
Understand that unemployment can
be measured in different ways and
be aware of the current major
approaches and the problems with
measuring unemployment
accurately.
Examine the costs of
unemployment; these may be both
economic and social and may apply
to households, governments, firms
and the economy.
Understand demand side causes,
such as cyclical unemployment,
driven by a fall in the level of GDP
(different schools of thought have
different views about how temporary
this is likely to be).
Understand supply side causes are
driven by problems in factor
Discuss what unemployment actually means, and how it might be
measured, e.g. Claimant Count, ILO's Labour Force survey.
Compare the Claimant Count and LFS measures – pros and cons of each,
and reasons for differences in their measurement.
Look at trends within the UK over the last 25 years or so and also in other
countries (such as Southern Europe).
Look at why unemployment might be a problem for an economy (e.g.
impact on budget, inequalities and living standards, Pareto inefficiency,
impact on business confidence reducing investment, risk of deskilling and
socio effect of unemployment). Consider the impact of youth
unemployment.
Why unemployment may come about and persist. Demand side and supply
side approaches (possible split is: Demand side: cyclical. Supply side:
structural, frictional, real wage). Explain that it is possible to categorise
30
markets, such as occupational and
geographical inflexibility, lack of
incentives to work and real wage
unemployment.
unemployment into voluntary and involuntary, but that there is substantial
debate as to the precise meaning of these terms.
Understand that solutions to
unemployment will depend on its
cause and nature, but that
approaches can broadly be
characterised as either demand side
or supply side.
Demand side solutions
Understand that, where a negative
output gap exists, governments can
use fiscal and monetary policy to
increase the level of aggregate
demand
How unemployment might be reduced. Look at demand side and supply
side approaches, and the extent to which each of these might be effective
and/or appropriate.
Evaluate the appropriateness and
potential effectiveness of such
solutions
Supply side solutions
Explain and evaluate potential
supply side approaches to the
reduction of unemployment,
targeted at particular labour market
problems
31
18
Inflation and
deflation
(revisited):
Measurement,
Calculation,
Causes, Costs
and Solutions
Understand how inflation is
calculated via weighted changes in
price indices, generally over a
twelve month period.
Identify the major measures of
inflation in use at the present time
and the differences between them.
Understand demand-pull and costpush explanations of inflation.
Explain and evaluate the quantity
theory of money.
Appreciate that rising prices can
create costs, but that these costs will
depend on the level of inflation, the
cause of inflation and the extent to
which it was anticipated.
Explain and evaluate possible
responses to the issue of inflation in
terms of how effective or desirable
solutions are likely to be.
Look at broadly what is meant by inflation and how it might be measured,
focusing on the difficulties with generating a representative measure of
inflation. Look at some of the main measures (CPI, RPI and RPI-X) used in
the UK, the reasons for each and the differences between them. Show how
weighted indices are used to calculate changes in the cost of living. Use
simple numerical questions to ensure learners can do it for themselves.
Discuss possible reasons for inflation, dividing them broadly into demand
pull and cost push, illustrating each with AD/AS analysis. Introduce the
concept of the NAIRU. Look at the Monetarist view on inflation via the
quantity theory of money, together with the extent to which the quantity
theory is true and/or relevant. Go through the equation and, again, ensure
learners can cope with simple numerical examples.
Look at why inflation is perceived as a problem (look at hyperinflation in
(say) Zimbabwe) Points might include: impact on competitiveness,
confidence and those on fixed incomes, policy trigger, redistributive effects
on savers/lenders and public/private sector (fiscal drag), damage to
resource allocation, disguise of inefficiency, menu costs, distorts the market
mechanism).
Discuss possible approaches to controlling inflation. Demand side
approaches via monetary and fiscal policy (look at current UK approach).
Supply side approaches via trying to break wage-price spiral (e.g. increase
competition between firms/globalisation, reduce trade union power).
Attempts to reduce inflationary expectations (e.g. central bank
independence, clear inflation targets). Costs and benefits of each
approach.
Mention Incomes policies of the past.
32
19
Deflation
Understand that, as with inflation,
deflation may be either demand side
or supply side driven and the effects
will depend upon the cause –
deflationary pressure caused by
supply side improvements may be
viewed as beneficial under some
circumstances.
Use one lesson to explain the impact of deflation on an economy (e.g. a fall
in consumer spending, increasing burden of private/public debt), falling
nominal wages leading to mass unemployment). Use Japan as an
example to discuss with learners and to understand the problems
associated with deflation.
Understand that demand-deflation
can create major problems for
economies and understand the
costs of such deflation to
households, governments and firms
as well as the difficulties
governments face when trying to
end deflationary spirals once they
have taken hold.
20
The Phillips
Curve: ShortRun and LongRun
Explain that there may be a trade-off
between inflation and
unemployment in the short run and
that such trade-offs have been
observed in the UK.
Argue that Neo-Classical
economists believe that the short
run Phillips curve is not stable due
to the role of expectations; in the
long run, attempts to hold
unemployment below its natural
Revisit the trade-off identified at AS level between unemployment and
inflation. Look at data for the UK 1970 to present day, and show that
between 1980 and 1992 there were clear trade-offs present, but that in the
1970s and post 1992 this trade-off is less apparent. Discuss possible
reasons for the break-down of this trade-off, looking at firstly the
expectations augmented Phillips curve. Show that if unemployment is
consistently held below the NAIRU then inflationary expectations may build,
meaning that when the labour market returns to equilibrium, a higher level
of wage and price inflation will now be locked into the system (and that
therefore the LRPC is vertical). Show the impact of the 1973 oil shock in
this context.
33
rate/NAIRU will result in accelerating
inflation and that when the economy
eventually return to its natural
rate/NAIRU it will do so with a higher
level of inflation.
Look at the role of supply side policies as a way of improving the Phillips
curve trade-off (by reducing the NAIRU). Look at the evidence of the post
1992 period. Thus the SRPC may shift either vertically or horizontally.
Show that most of the same issues raised by SR/LR Phillips curve analysis
can also be illustrated by SR/LR AS analysis.
Understand that changes on the
supply side (either favourable or
adverse) can cause the position of
the long run Phillips curve to shift
and that economic policy changes
can bring such shifts about.
21
22
Economic
growth
(revisited)
Actual vs.
potential
economic
growth
Explain the differences between
changes in measured gross
domestic product (GDP) (actual
growth) and potential growth and
understand that by ‘economic
growth’ economists are generally
referring to an increase in the
productive capacity of the economy
rather than short-term changes in
the level of national income.
Revisit the difference between actual and potential economic growth, and
look at how potential growth can be measured (business/trade cycles), and
explain the concept of sustainable growth. Revisit PPF analysis.
Explain the differences between
actual and potential growth using
the concepts of positive and
negative output gaps and the
34
business cycle.
Understand what is meant by the
term ‘recession’.
Causes of
growth
Understand that growth can be
brought about by changes in factors
such as the quantity, quality and
efficiency of use of factors of
production, changes in the state of
technology and changes in factor
market flexibility.
Look at the causes of growth, looking at policies to improve the quantity,
quality and efficiency of use of the economy’s factors of production together
with the impact of technological change. China as a case study both in pre
and post 1978 and then again it’s modern day foreign investment into
Africa. Link back to development economics and the growth strategies
considered there.
If time, opportunity to look at Marxist and Schumpeterian Schools of
Thought which focus on technological change/innovation as the key to
potential growth (and eventually the downfall of capitalism…)
Benefits and
Understand why growth may be
costs of growth beneficial to an economy in terms of
impact on households, governments
and firms.
Look at why growth is believed to be beneficial (e.g. impact on living
standards, government finances, jobs (in the long run) and profits).
Discuss possible problems with growth (such as excessive actual growth
leading to inflation, possible rising income inequalities, opportunity cost in
the short run (China again), ‘short run’ job losses, external costs and the
depletion of non-renewable natural resources (China again). Opportunity
to look at some “off-the-spec” models such Hubbert Peak Theory, Jevons
Paradox, Malthusian Catastrophe and Herman Daly’s Uneconomic Growth
theory.
Discuss the extent to which growth is or is not likely to be able to reduce
the problems of pollution and depletion of resources. Discussion of the
extent to which growth is sustainable. A good way of tying this together is
to link with the complementary ides of energy-independence and whether
35
energy-independence should be sought regardless of environmental
issues.
23
Control of the
national (public
sector) debt:
Measurement,
Causes,
Implications
and Solutions
Understand the relationship
between the budget/fiscal deficit and
the national (public sector) debt.
Understand that deficits may result
from either discretionary or
automatic government policy.
Explain why governments have
been concerned about high levels of
public sector debt.
Concerns may include opportunity
cost of interest payments, risk of
credit downgrades, confidence
issues surrounding refinancing and
the risk of crowding out and slower
growth.
Discuss the extent to which it is
appropriate to tighten fiscal policy
during periods of economic
downturn as a way of reducing the
budget/fiscal deficit.
24
Fiscal Policy
and Monetary
Policy
(revisited)
Admittedly, it’s not the easiest bridge to make but discussions concerning
economic growth should lead to discussions about growth strategies which
should lead into discussions about taking on public debt – either from the
Keynesian School of G>T in order to stimulate AD, or from the
development economics issues of LEDCs taking on debt in the 1970s and
1980s to pay for industrialisation and to pay for more expensive oil (Oil
Shocks of 73 and 79).
Explanation of how Government can finance budget deficits (IMF/World
Bank loans, selling Government bonds, foreign creditors). Discuss the
difference say between Japan’s national debt (purchased by the Bank of
Japan, other Japanese banks and trust funds – therefore insulated from the
global bond market) and Jamaica’s debt (owed to the IMF).
Discussion of problems associated with debt such as "crowding out"
(Monetarist critique of Keynesian policies), credit downgrades (look at UK
downgrade of 2013), confidence issues leading to higher cost of borrowing
(see current prices at FT Bond yields website). Contrast ‘crowding out’ to
‘crowding in’.
Discussion of fiscal austerity as a means of cutting down the budget (at a
time of recession). Case studies should include UK and Greece.
No additional specification content (see Term Two) but, having had the
discussions on economic growth and national debt recently, it is now an
ideal moment to revisit the topic of fiscal policy (critical to the A-Level
course) and revisit some key areas – this time linking it into the
36
Keynesian/Neoclassical debates and with economic growth and debt as
key discussion points.
From here, spend less (but not insignificant) amount of time doing the
same with monetary policy in order to reinforce the understanding of central
banks, interest rates, quantitative easing. Perhaps link to wider discussion
of Keynesian and Monetarism and the key tenets of both ideas – in
particular, taking time to explain the Monetarists’ view of Monetarist Policy
(that it only causes price increases and therefore that the growth rate of the
money supply should be targeted).
25
26
Financial
stability
The financial sector
Understand the changes in the
structure of the UK economy in
recent years, in particular the
growing size and influence of the
financial sector.
Asset bubbles
Explain, with appropriate examples
(for example the financial crisis of
2007-08), how asset bubbles may
arise and what the economic
consequences of such bubbles may
be.
Start with a discussion about savings and investment. Classical
explanation that S=I is not required (and will, in fact, be unhelpful) but a
general discussion of the basic business model of a financial institution (recycling deposits into investment) is a good basis to start from. Explanation
that investments, however, don’t have an immediate return and therefore
one of the most significant factors affecting investment is expectations of
the future (leading to a discussion of uncertainty and risk). Given this,
financial markets should be seen not just as a means to provide money for
investment but also to make money by taking advantage of the differences
among people’s views about future returns on the same investment project.
The buying and selling of an asset is driven not by the ultimate return but
by the expectations of that return.
Opportunity now to look at various financial organisations/fund managers
and how they have made money. Opportunity for plenty of investment/risk
games to illustrate the idea of speculation.
Should lead nicely to a discussion on speculation bubbles (case studies to
include dotcom bubble, 1997 asset bubbles is SE Asia – MINT economies)
and their impact on the economies.
37
The role and purpose of regulation.
Understand the need for regulation
of the financial system in terms of
creating financial stability.
27
Look at the general purpose of financial regulation (maintain market
confidence, financial stability, consumer protection, reduction of financial
crime) before taking a more detailed look at the FCA in the UK, their
powers and the impact they have had on the financial markets post-2008.
The balance of Understand what is meant by the
payments:
balance of payments.
Measurement
Understand that the balance of
payments sums to zero overall and
that a current account deficit or
surplus will be matched by
compensating flows on the
capital/financial accounts.
Look at the overall structure of the balance of payments, showing that it
should always sum to zero (via supply and demand for currency diagrams).
Current
account
imbalances:
causes,
impacts and
solutions to
current
account
deficits
Look at the possible causes of a current account deficit (this may include
the impact of terms of trade, strength of currency, underlying productivity
and competitiveness, level of domestic/global demand).
Understand why countries may end
up running current account deficits
(or surpluses) and what is meant by
a structural deficit (or surplus).
Understand the possible link
between changes in the terms of
trade and the overall current
account balance.
Evaluate the consequences of a
current account deficit/surplus.
Look at the extent to which a current account deficit might matter (e.g. short
run benefits in terms of escaping PPF, size as a % of GDP, duration,
possible deflationary effect, possible downward pressure on exchange
rates, has to be financed via capital flows/central bank purchase, all of
which have issues).
Ways in which a current account deficit might be reduced (such as:
protectionism, deflation, exchange rate, supply side policies) and an
evaluation of their effectiveness/desirability.
Evaluate possible approaches to
dealing with a sustained current
account deficit.
38
TERM SIX
Week
28
29
Specification
Specification Amplification
Content
European
Union
Learners need to draw on examples
from economies other than the UK
when discussing economic problems.
Analyse and evaluate the
advantages and disadvantages of
membership of the EU for member
states. and prospective members.
Evaluate whether the continuous
expansion of the EU is beneficial for
both existing members and new
members.
Evaluate the benefits and possible
drawbacks of membership of the
economic and monetary union
(EMU).
Assess the EMU in terms of its fit
with an optimal currency area.
Further guidance notes
Look at the history of the EU, its current structure and the costs and
benefits of UK membership of the EU. The expansion of the EU since 2004
and, in particular, the recent political furore over restrictions on Bulgarian
and Romanian people working in the UK which were lifted on 1 Jan 2014. A
discussion on the likely costs and benefits of this to both the existing and
new member states.
The European Single Currency. Look at the framework surrounding it (one
size fits all monetary policy, the stability and growth pact) plus the
convergence criteria. Look at reasons for, such as, price transparency,
increased competition leading to lower inflation, more growth and lower
prices for consumers, decrease in exchange rate volatility leading to more
investment and cross-border mergers (thus economies of scale), greater
FDI (in theory). Look at reasons against, such as, deflationary stance of the
ECB, risk of asymmetric shocks, changeover costs, rounding inflation and
the particular difficulties for the UK (such as variable rate mortgages and
stage of economic cycle).
Having considered the implications of monetary union, Robert Mundell’s
criteria for Optimal Currency Area (perfect labour mobility, perfect capital
mobility, harmonised business cycles and a single fiscal policy framework
to redistribute income amongst the area) should be offered for discussion.
Learners should be encouraged to assess whether the EMU fits these
criteria – there should be lots of relevant data concerning such issues and
one can also consider the membership of the PIIGS at their historical point
in time.
39
30
32
REVISION
40
PLAN 2
TERM ONE
Week
1
–
2
(Maybe
more, if
subthemes
are
looked
at in
more
detail)
Specification
Content
Specification Amplification
Further guidance notes
Scarcity,
choice and
opportunity
cost
Define and illustrate the concepts of
scarcity, choice and opportunity
cost for society, individuals and the
government.
Production
possibility
frontiers
(PPFs)
Learners should understand that
these concepts show that all
economies have to decide what,
how and for whom to produce and
understand the difference between
economic goods and free goods.
The goal here is to set the scene for the course as a whole, as well as
introducing learners to the idea that resources (land, labour and capital) are
scarce, but there are unlimited wants; all societies have to make choices.
You could use command vs. free market systems to illustrate the way in
which choices are made and the different outcomes that may result can be
a useful way to get across the idea that scarcity is a problem for all
economies. This can also be used to explore some of the issues such as
inequality and merit goods which will occur later in the course.
Specialisation,
division of
labour and
exchange
Use production possibility frontier
diagrams to depict choice,
opportunity cost, short- and longterm economic growth and
efficiency.
An introduction to the price mechanism and the invisible hand as the way in
which market based systems allocate resources can again flag up later
content, and look at some of the strengths (automatic resource allocation,
no waste, resources allocated to those most wanting them in theory) and
weaknesses (especially inequalities). This would be a basic introduction, as
market failure is covered later.
Understand movements along and
shifts in PPFs.
Move from this to show that scarcity can be illustrated graphically using
PPFs, giving an explanation that they represent the limit to an economy’s
output at a given point in time with existing resources at existing factor
productivity.
Understand that the PPF is usually
drawn concave to the origin
because of imperfect factor
substitution and why a straight line
Relate PPFs back to the discussions of market systems, to show that the
different choices systems have made can be represented two
dimensionally (e.g. Capital vs. consumer goods balance – Modern China
vs. UK vs. USSR), and then show that over time, these changes may have
41
PPF is an indication of perfect
factor substitutability of resources.
implications for the position of PPFs – i.e. that they can shift.
Learners will need to understand
the concept of increasing
opportunity cost at the margin as
output increases.
Explain factors which may shift the
PPF inwards or outwards.
Relate long-term economic growth
and changes in productivity to
outward or skewed shifts in an
economy's PPFs.
Learners should be able to
understand the link between PPFs
and economic potential as shown
by the long run aggregate supply
curve.
Perhaps also (but will cover later
too)
Understand the advantages and
disadvantages of specialisation.
Define productivity and explain how
it may be increased by the use of
specialisation and other factors.
This can then be used as a link to economic growth (actual and potential),
unemployment and trade; flagging up the macro side of the course, and
use this to discuss how short term decisions on resource utilisation may
have longer term implications, again looking at China as a case study. Link
to opportunity cost, as a concept and diagrammatically.
Other reasons for shifts in PPFs
– Pivots caused by improvements in productivity in one industry (IT/lean
production in manufacturing, miracle rice/GM in agriculture). Again, this can
be linked to productivity (learners should be able to define productivity) and
the extent to which this matters (how can the US’s GDP be so much bigger
than that of China?). Link to specialisation and division of labour, but link
back to market systems – show how specialisation is vital for growth but
that it also in itself requires an efficient system of exchange.
- link to the importance of money in providing a medium of exchange.
Inward shifts reflecting depletion of resources (Ebola, Malawian floods,
complete lack of investment – Sub-Saharan Africa?).
42
Learners should understand the
importance of specialisation at the
individual and national level.
3
Factors
influencing
demand and
supply in
product
markets:
Define a product market.
Demand
Learners should be aware that firms
and consumers are assumed to
behave rationally but that in reality,
economic agents do not always
behave rationally.
Explain the objectives of economic
agents: That firms seek to maximise
profits and consumers seek to
maximise satisfaction/utility.
Identify the main influences on
demand and supply in product
markets.
Understand why demand curves
normally slope downward from left
to right.
Understand the importance of
marginal utility in the derivation of
demand curves. Learners should
understand the concept of
diminishing marginal utility.
Recap on how markets allocate resources, and the notion of supply and
demand. Explain that all this can be illustrated graphically.
Discussion of how graphs work and how they can be read – in particular
the idea that they can be read either across and down or up and across is
important . Ensure that they are clear that demand curves can show both a
quantity and/or a financial value depending on how you look at them.
Concept of demand as effective demand (desire for a product supported by
the ability and willingness to pay). Factors affecting demand (income, price,
tastes, prices of substitutes and complements – anything the learners can
come up with; this is generally a good brain-storming exercise).
The principle of diminishing marginal utility can be used as a good way into
why demand curves slope down, can involve some fun experiments and is
ultimately a useful tool to explain consumer surplus and (eventually)
allocative efficiency. Links well with the idea of consumers as utility
maximisers.
Big effort on shifts vs. extensions in demand (price vs. non-price factors),
looking at the importance of the ceteris paribus principle, before moving
onto unusual demand curves – can be used as a way into the idea that
consumers may not be fully rational in particular the notion of conspicuous
consumption/Veblen goods, and Giffen goods. There are a variety of
interesting concepts that can be introduced here for half a lesson such as
default bias, price anchoring and pain of payment, just to get across the
idea that most of us aren’t quite as rational as we might like to think.
Learners should have a basic
43
understanding of the substitution
and income effects of a price
change.
Learners should understand that, in
reality, economic agents do not
always behave rationally.
4
Factors
influencing
demand and
supply in
product
markets:
Understand why supply curves will
normally slope upward from left to
right, for example, producers will be
able to make higher profits at higher
prices and that higher levels of
output mean increased marginal
costs in the short run.
Supply
Big introduction on the principles underpinning the supply curve; too many
learners misunderstand what supply really means, and therefore can’t
understand why an increase in demand will not automatically be met with
an increase in supply until price rises. Hence, look at – many buyers and
sellers, diminishing returns to a factor (marginal cost), desire to maximise
profit, using the opportunity to discuss why profit matters in a market
economy (reward for risk, incentive to produce, source of funds for
investment).
Learners should be aware of the
assumption that firms are price
takers in this analysis of the supply
curve.
Learners should be aware of the
main assumptions upon which free
markets operate, such as a large
number of buyers and sellers,
perfect information.
The housing market is a good scenario to use as an introduction to why
supply curves will be upward sloping (I won’t sell you my house for
£200,000 just because the house next door has sold for £200,000 – if you
really want to buy my house, you’ll have to pay a lot more!). This can then
be followed by agricultural markets, where the principle of diminishing
returns to a factor can be illustrated fairly simply using either physical or
thought-experiments.
Factors affecting supply (costs, technology, natural factors etc.). Hence
supply will be positively correlated with price.
44
Make completely clear that if supply curve has a positive gradient, then
suppliers will not increase supply without an increase in price due to
inability to cover costs, even if demand is present. Use vertical and
horizontal supply curves to drive this home, using music downloads and
fixed capacity events such as concerts as clear examples of exceptions,
going on to discuss when an upward sloping supply curve is realistic
(generally primary products).
Finally big effort on shifts vs. extensions in supply, i.e. distinguish between
price and non-price factors.
This area can also be a useful opportunity to introduce index numbers –
some reports will have supply comparisons which are indexed against a
base year.
5
The
determination
of equilibrium
price and
output in a
freely
competitive
market
Illustrate, using diagrams,
equilibrium price and output
situations in product markets.
Introducing the concept of equilibrium as a situation with no tendency to
change is quite important, rather than leaving it as a hanging term.
Explain effects on price and output
of shifts in demand and supply
curves.
Then the housing market can be used as an example of how excess
demand and supply will cause prices to rise or fall to equilibrium – get
learners to think about what would actually happen if prices were above or
below equilibrium and what this would mean in the real housing market –
thinking about what situation a given vendor would be facing in each
situation can make the situation clear.
Learners should be able to
understand the reasons for
movements along and shifts of
demand and supply curves.
How resources
are allocated in
Understand the role of profit and the
function of prices in allocating
resources to different uses.
Detailed discussion of each possible disruption to equilibrium (shift left/right
in D/S) and exactly how a new equilibrium arises; again emphasising that
prices will not start to change until excess demand or supply has arisen.
Use of real world case studies as exercises (BBC reports on crop price
changes are a good source, but increasingly Bloomberg and the FT have
good short video links or articles). Emphasise to learners that reaching a
45
a free market
economy
Consumer and
producer
surplus
Understand that changes in one
market affect other markets, for
example, interrelationships between
factor and product markets (also
covered in labour market section
below).
new equilibrium can take time. Concept of the invisible hand.
Again, there may be opportunities to bring in index numbers at this point.
Link back to market economies and the invisible hand – show that markets
are efficient, and then link into consumer, producer and community surplus.
Demonstrate that, in principle, those who are prepared to pay the most are
those who get supplied, and that the most efficient firms are the ones who
do the supplying. Calculations to illustrate the concepts or consumer or
producer surplus. Review how to calculate the area of a triangle.
Define, explain and illustrate, using
diagrams, consumer surplus and
producer surplus.
Learners should be aware that
consumer surplus and producer
surplus are jointly maximised at the
free market equilibrium.
Learners should be able to
calculate the value of consumer and
producer surplus, for example,
calculating the area of a triangle
from the figures given on a diagram.
6
Elasticity:
Understand the meaning of the
terms price, income and cross price
elasticities of demand and price
elasticity of supply.
Introduction of general concept of responsiveness to change; many
possible elasticities e.g. temperature elasticity, fashion, elasticity,
advertising elasticity, etc., but that there are 3 key demand elasticities and
1 supply elasticity that matter.
Price elasticity
Learners should be aware of the
Concept of responsiveness of demand to a change in price – idea that
46
of demand
factors which influence price,
elasticity of demand.
Learners should be able to define,
calculate and interpret numerical
values of elasticity.
demand may change a lot or a little following a price change, and that
demand will generally change in the opposite direction to price.
Getting learners to understand the concept without numbers first can be a
big help – using images of products and a line with ‘big change in demand’
and ‘small change in demand’ can get the idea across.
Learners should understand that
price elasticity of demand varies
along a straight line downward
sloping demand curve.
Introduction to idea of proportionality and then to equation for PED (%
change in QD/% change in price not dQ/dP.P/Q – far too confusing, and
misses the real point of elasticity at A level). Relating early on to the impact
on a firm’s revenue can also get the idea across, as well as reinforcing why
we might want to study this concept.
Explain the relationship between
price elasticity of demand and total
revenue.
Learners should be able to evaluate
the extent to which knowledge of
price elasticity of demand is
important to decision-making in
firms and governments.
Practice of simple calculations, explanation of the significance of both the
negative sign and the absolute value in predicting change in demand given
a change in price.
Factors affecting PED (substitutes, % of income, advertising/brand loyalty,
nature of product, width of definition, SR/LR).
Straight line demand curves – vertical, horizontal and downward sloping.
Explanation that PED varies along a straight line downward sloping
demand curve, with PED=-1 at the midpoint. Use this to illustrate the use of
PED for firms – when demand is price elastic, firms can increase revenue
by cutting price – show on diagram, discuss whether profits will rise – link
to production costs. Similarly, if demand is price inelastic then an increase
in price will increase revenue. Again, show on diagram. Show that
therefore, most firms will be close to the mid-points of their demand curves.
Look at the impact on price and quantity of changes in supply when
demand is perfectly inelastic, perfectly elastic, unitary elasticity.
Also cover the limitations of PED as a tool – can price changes really be
calculated/tried out, where does the data come from, discuss whether big
47
and small price changes will actually have the same proportional impact on
demand.
7
Elasticity:
Income and
cross price
elasticities of
demand, price
elasticity of
supply
Use the concept of income elasticity
to distinguish between normal and
inferior goods.
Learners should be able to define,
calculate and interpret numerical
values of elasticity.
Learners should be aware of the
factors which influence price,
income and cross price elasticities
of demand and price elasticity of
supply.
Income elasticity of demand. Idea that an increase in income may lead to
either a rise or fall in demand, hence YED can be either positive or
negative. Formula. Again a simple exercise involving ‘big rise in D’, ‘small
rise’, ‘big fall’, ‘small fall’ with product images can get the idea across that D
may rise or fall following a change in income.
Explanation of normal goods, divided into income elastic and income
inelastic and inferior goods focussing again on proportionality. Illustrate
using income-consumption graphs.
Implications of YED for firms’ strategy – not on specification, but adds a
little life to what can be a bit of a dull concept – idea of a portfolio of cyclical
and counter-cyclical goods (Tesco) etc., or firms that have successfully
rebranded either up or down market (Waitrose essentials? Skoda?).
Use social trends data to look at the relation of changes in income to
pattern of household spending – drop in food as a percentage of total
income even though spending has risen in absolute terms and relate this
back to income elasticity – spending may fall as a percentage of income
even if demand is rising if YED is less than 1.
XED – formula, substitutes and complements and positive/negative XED.
Implications of XED for firms (loss leaders and so on).
Links between markets – how changes in the price of one good have an
impact on the market for another in the context of substitutes and
complements. Use loss leaders, captive products as an example of how
firms might use XED for complements, and discuss advertising and product
differentiation as ways to decrease XED between substitutes (not on
specification).
48
PES – explanation of the concept – how easy it is for firms to respond to a
change in price. Assumptions behind PES (firms are price takers), and that
therefore the concept only applies in reality to a limited number of markets.
Learners find PES really confusing, often mixing PES up with supply and
very often fail to understand that it is the responsiveness of S to a change
in P which is being considered, not just the flexibility of supply (although
inevitably these are linked).
Formula – PES will generally be positive. Elastic and inelastic supply.
Factors affecting PES: Factor mobility/substitutability, storage, length of
production period, time period considered, capacity utilisation.
Graphs showing perfectly elastic, elastic, inelastic and completely price
inelastic supply, together with situations in which each may apply – again
music downloads/sports/music venues for the limiting cases.
Look at the impact on price and quantity of changes in demand when
supply is perfectly inelastic and perfectly elastic.
Introducing labour markets here can be interesting giving you the chance to
run some sort of experiment involving the backward bending supply curve
for labour.
8
9
Wage
determination
and Labour
market issues
Identify the main influences on
demand and supply in labour
markets.
Understand determinants of the
elasticity of the demand and supply
of labour.
Understand the causes and
Explanation of wages as the price of labour and that in a free market wages
are therefore determined by supply and demand.
Look at the demand for labour, discussing why firms need workers, and
what will determine their demand – link to technology, productivity, the
demand for products and thus the state of the economy. Labour is
therefore a derived demand and will be negatively correlated with wage
rates. No need for MRP theory at this point. Look at the factors that might
impact on the sensitivity of demand to a rise in wage rates (degree of
49
implications of wage differentials.
competition, factors substitutability, PED for final product and so on).
Knowledge of the factors which
cause shifts in the demand and
supply curves of labour is required,
illustrated by the use of diagrams.
Make clear that labour supply is those actively looking for work (not the
supply of jobs). Again, discuss the factors that will be likely to affect this –
wage levels, benefit levels, societal attitudes towards gender roles
(participation rates), migration, tax levels, education and so on. Hence,
supply will be positively correlated with wages, but strongly influenced by a
range of other factors. Built into this can be an analysis of what will make
labour supply more or less likely to rise following an increase in wage rates
(skills, qualifications, benefit levels and so on).
Understand that changes in one
market affect other markets, for
example, interrelationships between
factor and product markets.
Knowledge of marginal revenue
product theory is not required.
Understand the factors which affect
flexibility in labour markets, for
example, trade union power,
regulation, welfare payments and
income tax rates.
Explain the impact of migration on
labour markets.
Evaluate the effects of the statutory
national minimum wage on labour
markets.
Learners should understand the
links between issues in the labour
market and supply side
Show that wages, in principle, are therefore determined by supply and
demand, and that they will tend towards equilibrium. Distinguish between
unemployed and economically inactive.
A good exercise at this point is to get learners to try to explain wages'
differentials using supply and demand diagrams – using some real data,
they can tease out the supply and demand factors which result in some
jobs being far better paid than others.
Look at factors that may cause wage levels to shift such as trade union
power, immigration following EU expansion, changes in the structure of
industry, globalisation and so on.
Then look at government intervention in labour markets – the minimum
wage. Recent history, advantages and disadvantages from the point of
view of individual firms and workers as well as for the economy as a whole
(possible unemployment, may deter FDI/increase relocation abroad, may
increase participation rate, may force firms to invest, may reduce income
inequalities).
These topics provide the opportunity to make the link to macro, by flagging
50
performance in the economy.
up issues like unemployment and inflation, which in the linear course it
makes sense to introduce sooner rather than later.
Learners should understand the
impact of the national minimum
wage on economic agents and the
wider economy.
Learners should be able to illustrate
this through the use of diagrams
10
11
Government
policy
objectives
Explain the main macroeconomic
objectives and possible conflicts
between policy objectives.
Learners should understand why
governments have attempted to
achieve low inflation, low levels of
unemployment, sustainable
economic growth and equilibrium in
the current account of the balance
of payments.
Introduction to policy objectives (unemployment, inflation, growth
(actual/potential), current account) and policy instruments (fiscal, monetary,
supply side). The BBC News Website Economy Tracker gives a good
picture of macro data and trends with some simple to follow analysis and
explanation of key terms. The idea here is to set the scene for
macroeconomics as a whole – there doesn’t seem much point in
introducing models of the economy unless there is some context in which
to see it. There’s lots of opportunity for independent learner research here,
short learner presentations on different economies. Probably worth flagging
up the main policy instruments here too – monetary, fiscal and supply-side
policy – at least briefly, so that learners can begin to understand that
governments have tools with which they can attempt to influence their
policy goals.
Explanation of why each policy objective might be important and an
overview of some of the factors that might affect them. Idea of AD/AS
explained using PPF analysis, and extension of PPFs to try to explain
policy objectives. Analogy of economy as a glass of water can also be
helpful here to cement a simple picture of the economy into the minds of
learners (AS=glass, AD=water); likewise, getting learners to visualise the
economy as a restaurant with 10 tables can be helpful when getting them
to understand the situations in which prices will start to rise, capacity issues
51
and so on.
Lots of good resources – short video clips - on inflation on the Bank of
England website.
12
The circular
flow of income
model
Explain the flows in the circular flow
model and understand that they
should be equal
(income = output = expenditure).
Circular flow model. Concept of equilibrium revisited. This is an opportunity
to introduce the idea of Keynesian economics as the idea that one group’s
expenditure is another group’s income is explored. Lots of credit
crunch/austerity, Great Depression, Chinese growth activities here with
plenty of supporting clips available on the web.
Explain injections into and
withdrawals from the circular flow.
Injections and withdrawals, and the impact of a change in these on policy
objectives. Show how the multiplier is derived from circular flow. This can
be illustrated quite well by looking at regionally successful or unsuccessful
areas and the impact of a big business opening or closing. For example at
the time of writing, the closure of the 2 of the UK’s last deep coal mines.
Use the model to explain the
concept of national income
equilibrium and to explain how
changes in injections and
withdrawals might lead to changes
in the equilibrium level of national
income, and hence explain the
multiplier process.
Expenditure=Output=Income. GDP/GNP. Ireland is a good country to
contrast GDP and GNP because of its large multinational base.
Learners will not be required to
calculate the multiplier.
13
15
The
components of
aggregate
demand (AD)
Define the components of
aggregate demand: consumption,
investment, government spending
and net export (exports minus
imports).
Idea that the economy will be in equilibrium if AD=AS, followed by
components of AD (C+I+G+X-M): Learners can be made to derive this from
the circular flow model.
Consumption: Definition - total expenditure by UK households.
Significance of consumption as part of AD – use of actual data to show that
52
Explain the factors which affect the
levels of consumption and
investment in the economy.
C is over 60% of AD in the UK, but that this varies significantly from
economy to economy (why?). Good opportunity to introduce a comparison
with countries such as China.
Learners should explain the
importance of factors such as
income and profit, wealth, interest
rates, expectations and taxation.
UK’s recent consumer boom and the factors that have driven it, leading
onto the general factors affecting consumption (national income, interest
rates, tax, confidence/feel-good, house prices/equity withdrawal, availability
of credit – link to contemporary examples in each case).
Define productivity and explain how
it may be increased by the use of
specialisation and other factors.
This is a good opportunity to look at the impact of changes on policy
objectives, before learners latch onto diagrams as the only answer,
although still at a superficial level (rising C may improve actual growth, the
government’s fiscal position and unemployment but worsen inflation and
the trade balance).
Knowledge of the Keynesian theory
of the consumption function, the
marginal efficiency of capital and
the accelerator effect are not
required.
The AD
function
Understand why an AD function will
slope downward from left to right.
Understand that changes in the
components of AD can cause the
function to shift.
Learners are expected to explain at
least one of the following: the real
balance effect, the trade effect and
the interest rate effect.
Investment: Definition of investment - public/private, gross/net,
human/physical/R&D. Distinguish between depreciation, i.e. replacing
worn out capital, and expansion, i.e. buying additional capital in order to
increase output rather than simply maintain output levels.
Significance of investment in terms of impact on productivity,
competitiveness and potential growth (PPF analysis).
Use of budget data to illustrate productivity gap, and the measures that
might be used to close it, also look at data on the investment gap in terms
of % of GDP spent by different countries – China vs. UK/US. Again, World
Bank data can be used to look at the different patterns of investment in
different economies across the world and why this might be.
Lead into factors affecting investment (private sector) – interest rates and
business confidence (MEC theory – optional), taxes (esp. corporation tax),
tax breaks, profits, rate of technological change, access to funds – role of
stock exchange, pressures from globalisation.
53
This is also a good opportunity to look at bubbles for the first time – the
idea of overinvestment in the run-up to the financial crisis. Loads of good
articles and clips on ghost estates/cities in Ireland, China and Spain,
unused airports in Japan as a result of ill-advised fiscal expansion. Can
provide an initial antidote to the idea that Keynesian expansionism is
always a good idea.
From this the actual AD function can be derived, but before doing this it can
be helpful as an exercise to give learners blank AD/AS graph and ask them
to put a cross on it to show where they would like to be as an economy and
discuss why. What is wrong with other points? It sets out the idea that the
graph is linked back to policy objectives and isn’t just a pointless piece of
theory. It can help when it comes to deriving the AS function later on.
Discussion of the merits/ disadvantages of having a different balance in
terms of components of AD, i.e. should the UK switch from high consumer
spending towards high investment spending?
54
TERM TWO
Week
Specification
Content
Specification Amplification
Further guidance notes
16
The aggregate
supply (AS)
function
Understand the shape of the
Keynesian long run aggregate
supply (LRAS) curve.
Introduce the idea of AS representing the maximum potential output of the
economy – link back to PPFs and water/glass analogy.
Understand the factors which
might result in a shift in LRAS.
Determined by the quantity, quality and efficiency of use of the 4 key
factors of production.
Learners are expected to realise
that the LRAS is vertical at the
full employment level of output.
Keynesian AS – elastic at low output because as AD rises there are no
shortages of skilled workers/other factors of production. As the economy
approaches full employment shortages of factors will appear in particular
sectors of the economy, driving up costs and therefore prices. At full
employment, further increases in AD are purely inflationary.
These include: changes in the
quantity, quality and efficiency of
use of factors of production,
changes in the state of
technology and changes in factor
market flexibility.
Learners should understand how
changes in policy instruments
may be used to bring such shifts
about.
Show how changes in quantity, quality and efficiency of use of factors can
shift AS, pick examples in terms of all 4 factors – training, investment,
relaxation of planning controls, decrease in corporation tax and so on).
Show how the AS function might shift vertically as a result of changes in
cost-related factors (oil prices, VAT etc.). Big effort on factors that shift AS
right/left versus up/down. This will be useful in helping learners distinguish
between factors shifting SRAS and LRAS for the classical view.
Plenty of opportunity to link back to PPFs and brainstorm/research factors
that might shift the LRAS function and then link back to government policy,
giving an early insight into SSPs.
55
17
18
AD/AS analysis
19
–
21
Short run
aggregate
supply (SRAS),
Long run
aggregate
supply (LRAS)
(or longer,
if you
address
more
policy at
this point)
Illustrate and explain how AD
and AS interact to determine the
equilibrium level of output,
employment and prices in the
long run.
Diagrammatic analysis is
required.
Understand that there are
differences between Keynesian
and Neo-Classical views on what
the AS curve will look like in the
long run.
Understand why the SRAS
function is assumed to slope
upwards from left to right.
Understand why a SRAS
function might shift.
Explain the Neo-Classical view
of the process through which an
economy might adjust to long run
equilibrium.
Understand that Keynesian
economists disagree with this
process of adjustment because
Now is the opportunity to look at a variety of different real-world scenarios
and to allow learners to see the power of the model. There are a very wide
range of one-off or sustained scenarios that can be used to explore the
AD/AS model. The UK itself from 1979 to the present day can be used if
you focus on major incidents, Ireland from the early 90s is another very
good example. Then simple scenarios to highlight recent economic events
such as the recent collapse in oil prices, VAT hikes, the steady reduction in
UK corporation tax. It is also an opportunity to consolidate the theoretical
impact of rising consumption and/or investment on an economy.
This is probably the point at which the debate between Keynesian and
neoclassical economists can be formalised.
It may be helpful at this stage to introduce the idea of the NAIRU. Natural
rate; learners should by now understand from the nature of the ‘Keynesian’
LRAS that it can be hard to get an economy close to full employment (“in
the long run we’re all dead”), and that as AD rises, inflationary pressures
will build. It is a relatively short step from there to get them to understand
upward and downward self-stabilisation. This can most easily be done
through an exploration of the wage-price spiral – very high unemployment
puts downward pressure on wages, therefore firms, facing little demand,
will be pressured into cutting/not raising prices, therefore reducing inflation.
Linking back to the derivation of the AD function, it can be shown that AD
will start to rise. But likewise, when AD is too high, the reverse process can
be illustrated before any diagrams have been drawn, and the idea of a
stable, non-full employment output has been introduced.
Beyond this, there is some formal derivation to be done, but having
understood the upward sloping nature of micro supply curves, learners can
generally be made to understand SRAS as well, even though the mapping
isn’t direct. Plenty of opportunity to look at the situation in the Eurozone as
56
of issues such as inflexible factor
markets (‘sticky wage’, etc.) and
that, consequently, the LRAS
function may not be vertical at
the equilibrium level of output.
Learners should understand the
assumptions behind SRAS
analysis, such as fixed input
prices, productivity and
technology.
the extent to which about, and product markets are flexible is examined.
Krugman’s New York Times column inevitably has a rich vein of data along
these lines to be mined.
Depending on personal preferences, this area could be extended into a
discussion of austerity more generally, the role of supply side policies in
trying to make product and labour markets more flexible and also in
increasing potential growth/shifting LRAS to the right.
Learners should be aware that
SRAS in this form is associated
with Monetarist and NeoClassical economists.
Factors might include changes in
labour costs, changes in
commodity prices, changes in
the value of the exchange rate,
taxation and subsidies.
Learners should understand the
assumptions of flexible product
and factor markets which
underpin this analysis.
22
Monetary policy
Understand the role of the Bank
of England in creating monetary
and financial stability, and its
Role of the (independent) Central Bank and the Monetary Policy
Committee. Explanation of money and the money supply, the Bank of
England’s inflation target and how interest rates will be set to achieve this.
57
–
23
Framework
status as lender of the last
resort.
The operation of
monetary policy
and monetary
stability
Understand the purpose of the
Bank’s inflation target, its
symmetrical nature and any
other objectives that the Bank
may be required to pursue.
The importance of the symmetrical inflation target and the additional aims
that have been adopted since Carney became Governor. Impact of a
change in interest rates on AD/AS and hence on policy objectives including
inflation and the time horizon over which interest rates will be expected to
have an impact. The importance of having an independent central bank.
The Bank of England has a lot of good resources in this area both video
and printed, and the BBC has a new interactive resource that it is
developing, one of which is precisely about how interest rates work.
• Interest rates
Understand how changes in
interest rates may be used to
achieve the Bank’s objectives
and the factors the Bank is
likely to take into account
when setting base interest
rates.
Understand how interest rate
changes can impact both the
real economy and inflation.
Discuss the extent to which
changes in interest rates are
likely to affect the exchange
rate.
Learners should be able to
evaluate the likely impact of
changes in interest rates and the
overall effectiveness of interest
Advantages and disadvantages of interest rates as a tool for demand
management (such as, flexibility, ability to make a series of incremental
changes, but effectiveness in boom/recession scenarios, side effects on
investment and the exchange rate).
The breakdown of the interest rate transmission mechanism/credit crunch.
Lots of opportunity here for role-play of the Monetary Policy Committee in
making interest rate decisions (or generally having debates). If the UK isn’t
doing anything much, there are plenty of other countries that can be used
to illustrate the possibilities of inflationary or deflationary pressures. The
key here is both to understand the process of monetary policy but also to
understand that judgements are quite delicate.
QE and direct controls are probably best introduced in the context of some
sort of liquidity trap style argument, looking at the experience of the UK and
the US in the first instance to understand why interest rates alone might not
be sufficiently powerful to be able to achieve the Bank’s objectives. Again,
the Bank of England has plenty of resources explaining QE. There might be
some value in starting to explore Japan’s experience with QE (and maybe
the ECB if things go as badly as they are looking like they might) in terms
of its limitations). This also links to the idea of bubbles (below).
58
rate control as a policy tool.
Learners should be able to use
AD/AS diagrams to support their
analysis and evaluation.
• Quantitative easing (QE)
Understand the role of QE
within the financial system
and be able to explain how
QE is expected to work.
Learners should be able to
evaluate the impact and risks of
QE.
Learners should understand the
process through which QE may
eventually be reversed.
Detailed knowledge of different
measures of the money supply is
not required.
• Direct intervention
Understand that central banks
can intervene directly in the
banking system to stimulate
lending activity, for example,
59
funding for lending.
Learners should be able to
analyse and evaluate any
additional changes to the
operation of monetary policy that
arise over time.
24
Monetary policy
Financial
stability
• The financial sector
Understand the changes in
the structure of the UK
economy in recent years, in
particular the growing size
and influence of the financial
sector.
Learners should be able to
evaluate the extent to which the
UK’s large financial sector is
beneficial to the real economy
• Asset bubbles
Explain, with appropriate
examples (for example the
financial crisis of 2007-08),
how asset bubbles may arise
and what the economic
consequences of such
bubbles may be.
Probably the place to start here is with the idea of bubbles. There are
plenty of good case studies which can be researched, many of which have
things in common. Japan, the 2007-08 crisis, the Wall Street crash, the
.com bubble; all of these have similar underpinning themes but differing
aftermaths. There is no need to look at all of these in depth (or indeed at
all!), but it is an interesting area that makes clear the need for regulation of
the financial sector to create stability.
In terms of regulation, the key here is to understand why things can go
wrong and how we might be able to prevent it. There is no need for indepth analysis of the institutional arrangements in the UK, although a
knowledge of the key players is useful in terms of understanding stimulus
material in this area. There is plenty of opportunity to explore the idea of
moral hazard (non-specification) in the US mortgage market, bankers’
bonuses in the UK and the desirability of regulating this and how easy this
is likely to be.
It might be possible to cover the whole idea of information asymmetry at
this point in the course, as a micro diversion, meaning it doesn’t have to be
covered again as part of market failure.
This links naturally to a look at the UK’s financial sector and the extent to
which it is likely to be beneficial. Learners often get the idea that the only
thing the UK does is banking, and this might be an opportunity to look at,
60
• The role and purpose of
regulation
for example, UK export performance in different sectors to put the whole
thing into perspective, as well as making the point that the ‘financial sector’
isn’t just banking.
Understand the need for
regulation of the financial
system in terms of creating
financial stability.
Learners are not expected to
have a detailed understanding of
the system of financial regulation
in the UK.
25
–
26
Fiscal policy
Understand the overall purpose
and structure of the budget.
Framework
Demand side
fiscal policy
Analyse the possible impact of
changes in tax and spending on
the economy using AD/AS
diagrams and the Laffer curve.
Learners should be aware of the
major areas of government
expenditure and sources of
revenue.
Learners should be able to
explain the differences between
current expenditure and capital
expenditure and between direct
and indirect taxes and their
relative desirability.
Introduction to the budget – surplus, deficit, balance. Link to the national
debt. UK position on both, looking at recent budgets. Why a surplus or
deficit might matter. Link between surplus deficit and GDP (two way
causation), stabilisation policy. Keynesian vs. Classical views on the role
for a budget deficit. This can link back to the austerity debate that you
might have covered earlier in the course, and there is a lot of material out
there about countries that have followed different fiscal paths through the
financial crisis. Link to automatic stabilisers, and the view that a budget
deficit is ‘ok’ in a recession and a surplus in a boom – consider whether
governments should aim for a balanced budget across the economic cycle.
Government spending: Current vs. Capital spending. Impact of each on
AD/AS in the SR and LR. Probably worth introducing the idea of structural
and cyclical deficits at this stage. The idea of excessive government capital
spending can be stressed again at this stage. If you have used Japan,
Spain or China as case studies, the idea of potentially wasteful capital
spending is an interesting one to bring in if you haven’t done so already.
Taxation: Direct vs. Indirect. Progressive, proportional, regressive.
61
Learners should be able to
illustrate this idea using AD/AS
diagrams.
Explain how Keynesian
economists believe that fiscal
policy can and should be used to
control the level of aggregate
demand in the economy under
certain circumstances.
Learners should be able to
evaluate the use of demand side
fiscal policy in terms of both its
effectiveness and possible side
effects, for example, on the
public sector debt.
Advantages and disadvantages of direct (incentives, impact on AD,
progressive, collection) and indirect taxes (regressive, avoids disincentives,
targeting of demerit goods, inflationary impact), and their impact on the
economy.
Link between direct tax rates, tax revenue and incentives to work/brain
drain – Laffer Curve. AD/AS. Plenty of banker stories plus the long running
wealth tax in France to use to stimulate debate – also possible to flag up
equality, etc., as part of this debate; you could add this as a topic at this
stage rather than covering it as part of market failure/imperfection.
A nice extension discussion would be to discuss the pros and cons of
operating a flat tax system e.g. Estonia’s flat-rate income tax, or Slovakia
that sets the same rate of tax on everything!
Learners should be able to
evaluate the effectiveness of
these types of policy.
27
28
Control of the
national (public
sector) debt
Understand the relationship
between the budget/fiscal deficit
and the national (public sector)
debt.
Measurement
Learners should understand the
difference between structural
and cyclical deficits.
Having covered the potential role of fiscal policy, this topic gives the
opportunity to look at some of the implications of debt.
There is plenty of interesting data around about this with the UK, US, Japan
and Greece making interesting case studies about the extent to which debt
might or might not create problems.
Some of this ground will be becoming familiar to the learners, but now is
62
Causes
Implications
Solutions
Understand that deficits may
result from either discretionary or
automatic government policy.
Explain why governments have
been concerned about high
levels of public sector debt.
the chance to look in detail at the austerity debate once and for all;
depending on how much you have done on this before, this area might be
fairly quick, but a look at what has happened during the financial crisis, the
situation that Greece has found itself in, the story of Japan again, and so
on, are worth revisiting.
As part of this, spending some time on what debt really means, who it is
owed to, how bond markets work, what credit ratings are and why they
might be important is valuable.
Concerns may include
opportunity cost of interest
payments, risk of credit
downgrades, confidence issues
surrounding refinancing and the
risk of crowding out and slower
growth.
Learners should be able to
evaluate the extent to which
these concerns are reasonable
and hence whether debt is
always a bad thing.
Discuss the extent to which it is
appropriate to tighten fiscal
policy during periods of
economic downturn as a way of
reducing the budget/
fiscal deficit.
63
TERM THREE
Week
29
Specification
Content
Supply side
fiscal policy,
Supply side
policies
Specification Amplification
Further guidance notes
Understand what is meant by
supply side policies and understand
how they can be used to try to
increase trend growth/LRAS in the
economy as well as the flexibility of
product and factor markets.
Definition – improving flexibility of markets, increasing trend growth via an
increase in the quantity quality and efficiency of use of the four factors of
production.
Explain that fiscal policy can be
used to achieve policy objectives by
operating on the supply side in the
longer term (examples might
include influencing incentives to
work and to invest, ignore improving
infrastructure).
Learners should be able to evaluate
supply side policies in terms of both
their effectiveness and possible
side effect.
Learners should be able to analyse
and evaluate the impact of supply
side policies using AD/AS analysis
and PPFs.
This ties together some strands from earlier in the course such as labour
and product market flexibility, policies to shift LRAS, the importance of
productivity in determining international competitiveness (or not).
As part of this, you can explain the role of fiscal policy– the shift over time
from demand management to a focus on raising productivity/creating
incentives. AD/AS. Reasons for this change (disadvantages of demand
management – leads and lags, build-up of debt/opportunity cost – debt
interest, risk of destabilisation, side effects on incentives etc.). Examples
from recent budgets.
Types of supply side policy divided into labour, product and capital market
reforms, with examples of each. Probably worth exploring the idea that the
right type of supply side policy will vary from economy to economy – it
might be possible to contrast the current UK situation with that of an LEDC
in Africa if you pull some data together, which may begin to foreshadow
development economics.
Benefits: Economy more likely to self-stabilise, increased productivity and
efficiency leading to potential growth, downward pressure on inflation,
possible jobs and improvement to current account policy. Helps to avoid
short-run trade-off of policy objectives caused by demand management
alone.
64
Limitations: Unemployment (possibly structural), increased inequalities,
time lags, opportunity cost, limited effectiveness in recession (Keynes).
Good opportunity to introduce analysis and evaluation of some Thatcherite
supply side policies.
30
31
Unemployment
Measurement
and types
Costs
Causes
Solutions
Understand that unemployment can
be measured in different ways and
be aware of the current major
approaches and the problems with
measuring unemployment
accurately.
Learners should understand the
differences between economically
active and inactive individuals and
should understand what is meant by
the labour force.
Examine the costs of
unemployment; these may be both
economic and social and may apply
to households, governments, firms
and the economy.
Understand demand side causes,
such as cyclical unemployment,
driven by a fall in the level of GDP
(different schools of thought have
different views about how
temporary this is likely to be).
It is quite likely that significant parts of this area will already have been
covered earlier on, but one area that probably hasn’t been looked at is the
composition of the labour force, what unemployment really means and so
on. There is loads of good data on the ONS site and plenty of good
visualisations around. International activity rates are also a potentially
interesting set of data to look at, with Romania (for example) having a low
participation rate relative to the UK.
Compare and contrast the Claimant Count and LFS measures; understand
why some people are not eligible to receive JSA.
The rest of this section will be deepening understanding that learners
already have and building links between some of the other areas. Links to
budget deficits, social exclusion and inequality, health issues, and so on,
can make for some interesting discussions.
The causes of unemployment can be looked at through the lens of a variety
of interesting data, especially regionally within the UK as well as by age
group and duration.
When solutions are introduced, the Keynes-neoclassical debate can be
reignited and policies from different countries around the world can be
examined in the context of relative unemployment rates (very low youth
unemployment in Germany, for example).
The idea that unemployment can have demand or supply side
underpinnings can feed into a re-visitation and consolidation of the idea of
65
the natural rate of unemployment/NAIRU that has been covered earlier.
Understand supply side causes are
driven by problems in factor
markets, such as occupational and
geographical inflexibility, lack of
incentives to work and real wage
unemployment.
Learners should be increasingly confident in evaluating these sorts of
policies, having already looked at some of the limitations earlier in the
course. The difference is that they have more in-depth data to apply the
problems to and can build up a set of real cases to support their
discussions.
Learners should understand that
Keynesian and Neo-Classical
economists have different views as
to the real underlying causes of
unemployment.
Learners should understand the
natural rate of unemployment.
Understand that solutions to
unemployment will depend on its
cause and nature, but that
approaches can broadly be
characterised as either demand
side or supply side.
 Demand side solutions
Understand that, where a
negative output gap exists,
governments can use fiscal and
monetary policy to increase the
level of aggregate demand.
66
Evaluate the appropriateness
and potential effectiveness of
such solutions.
 Supply side solutions
Explain and evaluate potential
supply side approaches to the
reduction of unemployment,
targeted at particular labour market
problems.
32
33
Inflation and
deflation
Measurement
and calculation
Causes
Understand how inflation is
calculated via weighted changes in
price indices, generally over a
twelve month period.
Learners should be able to
calculate simple price indices and
understand the purpose of weights.
There are many aspects that need to be covered within this section. Initially
the focus will be on understanding index numbers if this has not already
been done, looking at different measures of inflation (most obviously CPI
and RPI, but stressing that there are a wide variety of measures, and
indeed that each individual really has their own rate is potentially worth it –
the BBC has a personal inflation calculator). It is worth looking at the
limitations of these measures, both statistically and otherwise as well as
thinking about why we need to bother measuring inflation at all.
Costs
Solutions
Deflation
Learners should be able to
calculate and interpret index
numbers, in the context of inflation
and in other areas.
Identify the major measures of
inflation in use at the present time
and the differences between them.
The ONS has lots of good data on changing weights over time and there
are lots of articles on ins and outs that make the point. Mathematical
practice of constructing simple indices will be useful.
When looking at the costs of inflation, hyperinflation is never a bad place to
start. There is plenty of good footage on the web about Zimbabwe and the
Bank of England has some good short films as well. The key is to instil an
awareness that the costs vary according to duration and size and that
deflation may be just as damaging (Japan again). Distinguish between
benign deflation (due to increased productive capacity i.e. AS shifting right)
vs. malign deflation (due to falling AD).
67
Understand demand-pull and costpush explanations of inflation.
Explain and evaluate the quantity
theory of money.
Learners should understand the
role of expectations in sustaining
and driving inflation through
mechanisms such as the wageprice spiral.
Appreciate that rising prices can
create costs, but that these costs
will depend on the level of inflation,
the cause of inflation and the extent
to which it was anticipated.
The causes are generally broadly well understood by this point, but
spending some time on the wage-price spiral and expectations can be
valuable in escaping a diagrammatic understanding, as well as looking at
the Bank’s inflation reports. The quantity theory is a useful tool to revisit QE
(if you didn’t teach it at the time) and a contrast between Zimbabwe and the
UK/US can be interesting in terms of when printing money does or doesn’t
trigger inflation and why/why not.
Solutions can be an interesting research piece as different approaches can
be contrasted for inflation. At the time of writing, deflation is mainly just
Japan, but the policy decisions of the Eurozone must also merit
consideration here.
Diagrammatic approaches are very useful here.
Costs include redistributive effects,
macroeconomic effects and
efficiency effects.
Explain and evaluate possible
responses to the issue of inflation in
terms of how effective or desirable
solutions are likely to be.
Understand that, as with inflation,
deflation may be either demand
side or supply side driven and the
effects will depend upon the cause
68
– deflationary pressure caused by
supply side improvements may be
viewed as beneficial under some
circumstances.
Approaches may include using
fiscal and/or monetary policy to
control AD/the money supply,
supply side policies to improve
labour and product market flexibility,
direct controls on wages and prices
and attempts to reduce inflationary
expectations.
Understand that demand-deflation
can create major problems for
economies and understand the
costs of such deflation to
households, governments and firms
as well as the difficulties
governments face when trying to
end deflationary spirals once they
have taken hold.
34
The short run
Phillips curve,
the long run
Phillips curve
Explain that there may be a tradeoff between inflation and
unemployment in the short run and
that such trade-offs have been
observed in the UK.
By this stage, the potential conflict between unemployment and inflation
should be well understood – learners have seen it through AD/AS analysis
and have examined it from both a Keynesian and neoclassical perspective.
This is therefore just presenting what they already understand in a different
form and in a different historical context.
Argue that Neo-Classical
economists believe that the short
Looking at the data for the UK across different periods (from the ONS)
makes the nature of the short run Phillips curve clear, and the idea that the
69
run Phillips curve is not stable due
to the role of expectations; in the
long run, attempts to hold
unemployment below its natural
rate/NAIRU will result in
accelerating inflation and that when
the economy eventually return to its
natural rate/NAIRU it will do so with
a higher level of inflation.
Understand that changes on the
supply side (either favourable or
adverse) can cause the position of
the long run Phillips curve to shift
and that economic policy changes
can bring such shifts about.
relationship is not stable over time also becomes pretty clear.
Learners can be asked to research trade-offs in other countries and will be
likely to come back with quite a bit of evidence for the idea that sharp
changes in unemployment trigger inverse changes in inflation.
The 1973 oil shock can be used to illustrate the generation of inflationary
expectations, and can be set in the context of Friedman’s earlier
predictions of the breakdown of the short-run Phillips curve; adaptive
expectations are the easiest to use to illustrate the breakdown here.
The impact of SSPs can be illustrated, allowing a recap of the NAIRU,
shifts in LRAS and so on, setting the scene for Economic Growth as a topic
and completing the whole unemployment, inflation, D side S side story arc.
Link the potential impact of inflationary expectations with the role of an
independent central bank setting an inflation target.
Diagrammatic analysis is required.
Learners should understand the
role of inflationary expectations
within this model.
35
36
Economic
growth
Actual vs.
potential
economic
growth
Explain the differences between
changes in measured gross
domestic product (GDP) (actual
growth) and potential growth and
understand that by ‘economic
growth’ economists are generally
referring to an increase in the
productive capacity of the economy
By this stage, learners will have a pretty clear idea of what growth is in
terms of AD/AS analysis, so much of the initial work here will be a recap of
earlier work on AD/AS and PPFs.
Even looking at the causes of growth may be relatively straightforward at a
superficial level, with an evaluation of supply side and demand side policies
in general. Greater sophistication can be introduced by looking at the
specifics of some different countries facing different problems. The situation
70
rather than short-term changes in
the level of national income.
Causes of
growth
Benefits and
costs of growth
Learners should be able to illustrate
actual and potential growth
diagrammatically using both PPF
and AD/AS analysis.
Explain the differences between
actual and potential growth using
the concepts of positive and
negative output gaps and the
business cycle.
Understand what is meant by the
term ‘recession’.
Understand that growth can be
brought about by changes in factors
such as the quantity, quality and
efficiency of use of factors of
production, changes in the state of
technology and changes in factor
market flexibility.
for the UK might be examined through a look at the LSE growth report and
our areas of comparative advantage that are likely to prove the growth
areas of the future. Contrasts might be made with China, about which large
amounts of information are available on their progress since 1978 and the
current situation, and with a genuinely underdeveloped economy from subSaharan Africa such as Malawi. The policies to create growth will be very
different in each case which will highlight the key issues.
Likewise the costs and benefits of growth will be highly dependent on the
stage of development. The BBC has some good footage on the great smog
of 1953 in London, discussions of ‘peak oil’ are worth a look and inequality
can again be raised as an issue here, with Richard Wilkinson's TED talk on
the impact of inequality in developed economies a good starting point for
discussion.
But the idea that economic growth over the last 100 years had made a
massive difference to living standards of people in this country in terms of
life expectancy, leisure time, labour-saving devices, the nature of work, the
quality of leisure and so on does need to be made clear.
Link to market failure – externalities, inequality etc.
Learners should be able to discuss
the importance of these factors and
discuss the extent to which changes
in policy instruments may be used
to create growth.
71
Understand why growth may be
beneficial to an economy in terms of
impact on households,
governments and firms.
Learners should be able to evaluate
these benefits in terms of how
evenly such benefits may be
distributed, the opportunity costs of
growth, the sustainability of growth
and the side-effects of growth in
terms of conflicts with other policy
objectives.
37
39
Advantages
and
disadvantages
of free trade
Protectionism
Understand the advantages and
disadvantages of international trade
from the point of view of the
economy as a whole and for
households, firms and government.
Learners should be able to explain
the theory of comparative
advantage using numerical and
graphical approaches.
Globalisation
Trade and the
UK
Learners should understand the
difference between absolute and
comparative advantage.
Learners should be able to explain
and numerically illustrate the terms
of trade.
Starting with a reminder of PPFs and how trade may allow a country to
escape its PPF is useful as an early activity, and a discussion of the
benefits of free trade in terms of driving up competition, widening access to
resources may help to revise some aspects of supply side economics.
The theory of trade requires learners to be able to understand, numerically
and graphically, the situations in which, in principle, two countries might or
might not be able to trade – an understanding of the limitations of the
model such as protectionism, transport costs, and so on, is also important.
Reasons for trade outside of comparative advantage may use case studies
of the impact trade has had on economic growth and living standards
(China again) - comparative advantage leading to increased living
standards (consume outside PPF), liberalisation leading to increased
efficiency, potential growth and downward pressure on inflation. Lower
prices and greater choice/quality for consumers.
As part of this, a look at what the UK actually appears to have comparative
72
Understand the arguments for and
against the implementation of
protectionist policies.
Explain and illustrate key methods
of protectionism.
Methods include: tariffs (diagram
required), quotas, subsidies,
exchange rate manipulation and
administrative/regulatory policies.
Evaluate the costs and benefits of
globalization.
Identify the UK’s major export
sectors.
advantage in. You may have touched on this earlier, but looking at the UK’s
major exports of goods and services may allow a recap of issues such as
unemployment and growth policy.
Reasons against free trade/in favour of protectionism - strategic industries,
infant industries, prevent dumping, cultural factors, revenue raising (tariffs),
protect jobs, solve current account deficits – look at the extent to which
these arguments are actually valid and whether, even so, they are likely to
outweigh the benefits of trade – Great Depression as a case study might be
interesting, perhaps contrasted with the more limited protectionism that
took place during the Great Recession – the role of the WTO might be
introduced, although how much impact the WTO really has currently can be
questioned; there is plenty of scope for roleplaying exercises here to
expose the limits to the power of the WTO.
Forms of protectionism (tariffs, quotas, subsidies, administrative barriers,
exchange controls, ‘precautionary bans’, voluntary export restraint etch,
looking at actual cases, bra wars, US steel protection…). Limitations of
these (retaliation, increasing inefficiency and so on).
Evaluate the extent to which an
increasingly integrated world
economy is beneficial to the UK.
Learners should understand the
role of the World Trade
Organisation (WTO) in policing
trade agreements and negotiations.
73
TERM FOUR
Week
1
2
Specification
Content
Specification Amplification
Exchange rates Explain that in a free-float system,
and exchange the exchange rate will be
rate policy
determined by the forces of demand
and supply.
Exchange rates
in a free market Use demand and supply diagrams
to analyse and evaluate the factors
which might cause exchange rates
Exchange rate to appreciate or depreciate.
policy
Learners should understand that
demand for a currency is equal to
exports plus capital inflows, whilst
supply is equal to imports plus
capital outflows.
Such factors may include interest
rates, QE, trade flows, confidence,
safe haven issues and speculation.
Evaluate the possible impacts of
changes in exchange rates on the
policy objectives.
Learners should be able to use
AD/AS diagrams to support their
analysis.
Further guidance notes
Introducing this topic is probably best done with actual data involving
familiar situations for learners – holidays, eBay purchases from the US and
so on. After that, the key is to make it clear who is doing the demanding
and supplying in exchange rate markets – that it is not (just) the central
bank - that supply of sterling comes from holders who want to buy foreign
currency and that demand is not generally from UK citizens, but from
holders of foreign exchange who need sterling for a variety of purposes.
Then the idea of D and S and the factors likely to affect it can be brought in,
stressing the importance of capital flows for an economy like the UK.
Opportunity here to link with the Balance of Payments Financial Account.
Factors causing changes in equilibrium. In many ways this can be a useful
recap of supply and demand, which may now feel quite a long time ago:
changes in interest rates, trade balance, confidence, expectations etc. Look
at recent history– Asian crisis and collapse of the rouble, recent weakness
of the euro and the factors that might have driven these realignments.
Impact of a change in exchange rates on the economy (SR/LR) and
individual economic factors. Link to policy objectives, show that
depreciation may have mixed impact on trade balance in the short and long
run (Marshall-Lerner condition), and whilst this may decrease
unemployment and increase growth, it might cause inflation if supply side
conditions are tight. Look at the after-effects e.g. ERM exit for the UK back
in 1992 or the rouble collapse of 2014. Similarly a strong pound may be
instrumental in holding down inflation (recent strength of the pound helping
BoE).
74
Evaluate the microeconomic effects
of exchange rate changes on
households and firms.
Understand how monetary
authorities can influence the value
of an exchange rate in a floating
system
(a ‘managed’ or ‘dirty’ float).
Hence the reasons that governments may have a policy geared towards a
particular level of currency strength. Good recent examples to discuss to
make clear some of the ideas have been China (formerly held low, now
slowly rising), Denmark trying to hold its peg against the euro, Switzerland,
Russia allowing its currency to fall rather than trying to defend it, the UK
during the ERM period and the perils of trying to hold a currency artificially
high.
Learners should understand what is
meant by an exchange rate index.
Learners should be able to explain
the impact of changes in exchange
rates on the terms of trade.
Understanding of the MarshallLerner condition is required.
Evaluate the advantages and
disadvantages of policies which
hold exchange rates artificially
above or below their free market
levels.
3
-
The balance of
payments
Understand what is meant by the
balance of payments.
Measurement
Understand that the balance of
payments sums to zero overall and
In reality the study of exchange rates will overlaps with this area to a
considerable extent, but it is still worth looking at exchange rates in detail
first because the idea that the supply and demand of a currency will be
equal is the key to understanding that the balance of payments will sum to
zero, an issue that learners generally struggle with.
75
that a current account deficit or
surplus will be matched by
compensating flows on the
capital/financial accounts.
4
Current
account
imbalances:
causes
Current
account
imbalances:
impacts
Detailed knowledge of the subcomponents of the balance of
payments is not required.
Understand why countries may end
up running current account deficits
(or surpluses) and what is meant by
a structural deficit (or surplus).
Factors may include: productivity,
factor costs, exchange rates,
industrial structure, commodity
prices, protectionist policies and
sources of comparative advantage.
Solutions to
current account Understand the possible link
deficits
between changes in the terms of
trade and the overall current
account balance.
Whilst there is no requirement to look at the balance of payments in huge
detail, looking at goods, services and transfers for the UK is likely to prove
rewarding, especially transfers which may give an insight into why
eventually sustained trade deficits may be unsustainable.
Much of the material on causes of deficits and surpluses will be useful in
recapping last year’s work on productivity, investment, consumptions and
so on. Using China, Germany, the UK and maybe Saudi Arabia/Russia as
case studies in why surpluses or deficits emerge may be useful in bringing
out the key issues.
The link between exchange rates and trade can be illustrated well through
the terms of trade, which can also highlight the significance of import and
export elasticity (hence the Marshall-Lerner condition).
Looking at the impact of trade surpluses and deficits in the UK’s case may
allow some recapping of the financial crisis from last year and an analysis
of share/property prices in London may again allow supply and demand to
be revisited.
Solutions will allow demand and supply side policies from last year to be
revised, together with some of their evaluative points.
Learners should be able to
calculate the terms of trade index.
Evaluate the consequences of a
current account deficit/surplus.
Understanding the nature of the
76
deficit/surplus, its causes and the
nature of compensating capital
inflows are likely to be significant in
evaluation.
Evaluate possible approaches to
dealing with a sustained current
account deficit.
These may include exchange rate
policies, deflationary policies,
supply side reforms and
protectionism.
5
6
The European
Union
Learners need to draw on examples
from economies other than the UK
when discussing economic
problems.
Analyse and evaluate the
advantages and disadvantages of
membership of the EU for member
states and prospective members.
Evaluate whether the continuous
expansion of the EU is beneficial for
both existing members and new
members.
Evaluate the benefits and possible
drawbacks of membership of the
The travails of the Eurozone are likely to have been touched on at various
points over the last year of the course and this is an opportunity to put it all
into one place.
The recent rise of UKIP means that there is a lot of debate online about the
benefits of EU membership to the UK and by the time this specification is
live, we may well be facing an in-out referendum. It is important to draw out
the economic and non-economic factors that are likely to feed into this
debate, but there is a lot of material to be looked at from the perspective of
the UK.
The debate is different when looking at recent joiners or potential new
entrants and it is worth spending some time either looking at what has
happened to the recent joiners or analysing the situation likely to face new
joiners. It is also vital to make clear the difference between EU membership
and membership of the European single currency.
77
economic and monetary union
(EMU).
Learners should have an
understanding of the structure of
the EMU (Eurozone), including the
role of the European Central Bank.
Assess the EMU in terms of its fit
with an optimal currency area.
7
The euro is a topic that will have come up before, most likely in the
austerity debate, and a good way of looking at it is through the lens of
Mundell’s criteria for an optimal currency area; bringing out evidence on
whether each of the criteria is hit is an interesting lesson, and a contrast
with the single currency area of the US and how they were able to bail out
Detroit because of a central government with fiscal authority (or even the
UK and the single pound area; material from the Scottish independence
debate might be useful here) can be a useful way of highlighting the
strengths and weaknesses of single currency areas.
Economic
development
Understand what is meant by the
concept of economic development.
Although you may have touched on LEDCS at times before, this marks the
start of a look in detail.
Measurement
Evaluate the extent to which
changes in national income are a
good indicator of changes in the
level of development in a country.
There is a wealth of information available on the measurement of economic
development from the United Nations. Hans Rosling’s gapminder site is
also a great tool. This is an area where learners can do huge amounts of
research, build presentations, etc., both inside and outside of class.
Learners should be able to explain
the difference between GDP and
gross national product (GNP).
A fair amount of the material here will be a recap of what has already been
looked at in the context of the costs and benefits of economic growth, but
putting it into the context of LEDCs and emerging economies brings the
benefits of growth into sharp focus.
Learners should understand the
meaning and significance of
purchasing power parity
adjustments.
Identify and understand other
possible measures of economic
development, including:
Although calculating the HDI is not on the specification, getting learners to
do so is a good way of getting them to understand how it really works and
what its strengths and limitations are. The data is readily available from the
UN HDR site.
Likewise showing how the MDPI is calculated can be a good way of
exploring the Millennium Development goals.
78
 the human development index
(HDI) – understand how the
index is calculated and be able
to discuss the extent to which the
HDI can show differences in
economic development
Learners will not be expected to
calculate HDI.
 the economic structure of an
economy
By the end of this, it will be helpful if learners have some case studies of
countries at different levels of economic development so that when
obstacles and solutions are examined it will be clear that both of these are
highly contextualised.
Can be fun to get learners to make 5 minute films on a country of their
choice highlighting key features, which then links into obstacles.
Consideration of primary/secondary/ tertiary/quarternary sectors and
economic structure – patterns of the balance of each of these in LEDCs
and MEDCs.
 more indirect indicators such as
access to health and education,
access to the internet and mobile
phone usage
Learners should have an
awareness of the United Nations
Millennium Development Goals.
Learners should have some
understanding of typical economic
problems facing more economically
developed countries (MEDCs),
LEDCs and emerging economies.
8
Economic
development
Obstacles
Discuss why LEDCs may face
difficulties in competing with
MEDCs and in raising their level of
economic development.
There are a very wide variety of issues that can be examined here and
coverage of the ones mentioned in the spec will give a strong background
understanding to the issues faced by LEDCS.
79
–
10
11
13
Explain and evaluate relevant
obstacles; including: the extent to
which endowment with natural
resources is beneficial or whether
there is a ‘resource curse’,
low levels of health and education,
low life expectancy, the impact of
MEDC trade policies, the impact of
poor levels of infrastructure, capital
and technology, the effect of
institutional weakness and poor
governance, high levels of public
sector debt and rapid population
growth.
Economic
development
Solutions
Explain and evaluate possible
approaches to raising the level of
economic development; including:
liberalisation – a move towards a
more free-market based system
involving internal and external
liberalisation, international aid, debt
relief, government intervention in
the form of policies such as import
and export substituting
industrialisation and encouraging
FDI.
It is tempting to spend an hour each on:
Infrastructure issues (incl. capital and technology). Hence the poverty trap.
Could link weak banking system to Harrod-Domar (non-spec).
Low levels of health and education provision (including HIV/AIDS in SSA).
Governance and Corruption (Transparency International a useful resources
here).
Population issues – growth and structure; could link to Lewis 2 sector
model (non-spec).
Debt.
Trade policies of MEDCs (Probably already covered earlier in the course).
And a couple of hours on:
Primary product dependency/ resource curse (because you can cover
primary product price volatility at this stage, saving time when discussing
market failure and imperfections later). Can revisit the terms of trade here
via the Prebisch-Singer hypothesis (non-spec).
The focus here needs to be the extent to which the solutions have
succeeded or may be able to do so in the future; under what circumstances
are they more or less likely to be successful?
Probably worth spending time on each of:
Liberalisation (Oxfam’s luckiest nut video, although a little dated is still
worth using here) – 2 hours.
ISI/EPI (Brazil vs. Asian Tigers– 2 hours.
The role of FDI, especially the role of China in Africa is worth a look - 1
hour.
AID (Aims and effectiveness) - 1 hour.
Debt relief - 1 hour.
Other solutions (Private venture capital, Grameen Bank?) - 1 hour.
80
TED talks by Jaqueline Novogratz interesting here. Other interesting TED
talks include those by Paul Collier and Dambisa Moyo.
14
–
15
Micro revisited
Explain the law of diminishing
returns.
This is a major shift of focus back to microeconomics and setting the scene
is probably important.
Costs,
revenues and
profits, The
growth of firms
A numerical and diagrammatic
understanding of total, average and
marginal product is required.
Large parts of this area are inevitably quite technical and the greater the
extent to which concepts can be illustrated using a variety of techniques
such as games, real world stories and worked calculations the better.
Learners should understand that
diminishing returns may not set in
immediately.
It can be helpful to teach the relationships between marginal, averages and
totals in the abstract first – using a different analogy like learner heights, or
some such, to show how they might interact. It might be worth producing
materials for more A level mathematicians to allow them to see the links
with calculus.
Distinguish between fixed and
variable costs and be able to
distinguish between the short run
and the long run.
Learners should understand the link
between the marginal product of
labour and a firm’s marginal costs,
for example, as the marginal
product of labour falls, the marginal
costs rise as more workers are
employed.
Define and calculate total, average
and marginal values for revenue
and costs.
Revisiting a diminishing returns game may be helpful for illustrating
increasing and diminishing returns to a factor.
When looking at fixed and variable costs, it is important to make it clear that
fixed costs are not literally fixed – that they change, just not with output.
External economies of scale is a concept that learners often mix up. Good
contexts include IT in the UK or US and the Formula 1 industry in the UK.
Internal economies and diseconomies of scale can be linked with growth
and mergers, and there is plenty of opportunity here for student research
and presentations. In particular all the research that suggests that most
mergers destroy shareholder value is interesting and cases such as RBSABN AMRO are worth looking at; getting learners to research their own
mergers is often a worthwhile exercise at this stage.
Appropriate diagrams should be
81
used to illustrate all concepts
relating to costs and revenues (the
difference between the short run
and long run is required).
It is worth spending a bit of time on the transition from one short run to the
next when deriving LRAC and teasing out the differences between using
existing capacity more effectively and an actual increase in capacity; the
idea that unit costs will probably rise immediately after an expansion is an
interesting illustrative point diagrammatically. Envelope curve.
Explain and illustrate internal and
external economies and
diseconomies of scale.
Learners should be able to derive
the long run average cost curve.
Understand how and why firms
might grow.
Learners should understand the
difference between internal and
external growth.
Understand types of
integration/mergers (horizontal,
vertical and conglomerate).
Learners should be able to evaluate
the possible costs and benefits of
growth/mergers.
82
TERM FIVE
Week
Specification
Content
16
Background to
market
structures
Specification Amplification
Further guidance notes
Explain that the structure of a
market depends on the number of
firms and their ability to enter and
exit markets freely (contestability).
Once costs have been covered, it is then a question of setting the scene for
what follows – why we have bothered at all? Hence explaining that we are
going to take our model firm with its costs and look at what happens in a
range of different situations is useful. Learners can brainstorm markets that
they think will be more or less competitive, or put them on a printed out line,
and they can work out what makes a market more or less competitive – out
of this the key market structures should emerge, together with an idea of
barriers to entry. Worth considering innocent vs. strategic barriers to entry –
leads into a nice discussion of natural monopoly.
Explain the concept of profit
maximisation (using marginal
revenue and marginal cost).
Define and understand the
difference between normal and
abnormal profits.
Learners should understand that
economists define profits differently
to businesses, that is, accounting
profit compared with economic
profit.
As part of this, profit maximisation can be set up as our initial assumption –
looking at why profits are valuable to a business is useful at this stage, and
can be taught using a simple ‘suppose price is fixed at £10, how many units
will the firm want to sell?’. This then sets up perfect competition.
You can show abnormal profit in this analysis, and it is worth stressing that
normal profit cannot be shown on the diagram because it is already part of
cost.
Discussion of the disruptive nature of Uber globally is a great example to
introduce here.
17
-
Perfect
competition
Define perfect competition and
explain the importance of its
underpinning assumptions.
Explain and illustrate with diagrams
the short run and long run
Getting learners to work out what they think will make a market perfectly
price competitive can be a good first exercise. Then getting them to come
up with real-world markets that they think will fit the key criteria of
homogeneous products, free entry and exit, no barriers to entry in the LR
and perfect knowledge is beneficial.
83
equilibrium price and output for the
firm and the industry.
18
Learners should understand how
the short run adjusts to the long run.
Explain and evaluate the efficiency
of perfectly competitive markets.
Explain and illustrate the concepts
of productive and allocative
efficiency.
Learners should be able to evaluate
perfectly competitive markets using
allocative and productive efficiency.
Apart from getting them to derive and use the models (which will reinforce
earlier work on normal and abnormal profit) it can be worth considering
issues like whether the internet is making markets more or less perfect.
Discussing the extent to which markets do tend towards normal profits in
the long run can be interesting and contrasts with formerly very profitable
sectors (restaurants with an unusual twist or even a discussion of the
salaries that early computer programmers could command).
At this stage, learners can be introduced to the ideas of productive and
allocative efficiency – allocative efficiency can be linked back to
maximisation of community surplus from year 1 – the idea that D=MU and
S=MC meaning welfare will be maximised. Productive efficiency is easier to
understand – but in both cases, learners need to be clear in why the
efficiency is beneficial for the economy as a whole/wider society. In other
words, they are not just points on a diagram.
Learners should be able to illustrate
productive and allocative efficiency
through diagrams.
19
Monopolistic
competition
Define monopolistic competition
and explain the importance of its
underpinning assumptions.
Learners should understand the
importance of non-price factors
such as differentiated products and
advertising in monopolistic
competition.
Explain and illustrate with diagrams
The most important thing here is for learners to understand that this is not
monopoly! Getting learners to think about which assumptions of perfect
competition they would change if they wanted to make a more realistic
model can be a good starting point, because they often go for identical
products and perfect knowledge and you can build from there.
After that, probably the big challenge here is getting learners to understand
why MR and AR are no longer the same when D slopes downwards.
Making it clear that price cuts apply to all products, not just the marginal
ones with numerical examples will help. The link between MR, AR and TR
can best be explored by relating back to PED and the idea that TR is
84
the short run and long run
equilibrium price and output for the
firm.
Learners should understand how
the short run adjusts to the long run.
Explain and evaluate the efficiency
of monopolistically competitive
markets.
Learners should be able to evaluate
monopolistic competition using
allocative and productive efficiency.
20
21
Monopoly
Define monopoly and explain the
importance of its underpinning
assumptions.
Learners should be able to
distinguish between structural and
behavioural barriers to entry, for
example, high start-up costs as
against limit pricing.
maximised at the midpoint of the D curve – the link to MR and AR will now
make it much clearer why this is true.
Monopolistic competition can be used to examine non-price competition
and competitive strategies - using scenarios like how a local restaurant
might increase sales brings out a wide range of ideas in discussion, and
stealing the marketing mix from business studies as a framework can be
helpful here.
Diagrammatically the challenge is to keep learners away from the minimum
point of the AC curve and to explain exactly what productive and allocative
inefficiency really mean in terms of wasted resources per unit and welfare
loss.
Monopoly is the point at which real world issues can be examined in some
detail.
Although many real world monopolies probably fit into the category of
oligopoly, the line is blurred and looking at the economies of scale and
dynamic efficiency that is clearly present in organisations like Google and
Amazon is well worth the time.
Learners should understand the
concept of a pure monopoly.
The diagrams essentially replicate monopolistic competition (although it is
essential that learners can explain them effectively), so most of the time
can be spent looking at interesting issues such as barriers to entry (game
theory can be used here in terms of the incumbent monopoly game).
Compare, using diagrams, the short
run and long run equilibrium
positions in perfect competition with
Probably the most interesting aspect is looking at the benefits of firms
which operate on a large scale in terms of the impact on the economy as a
whole and consumers in terms of lower prices resulting from scale
85
those of monopoly.
Learners should understand the
links to international
competitiveness.
Explain and evaluate the potential
costs and benefits of monopoly, for
example, price discrimination, lack
of contestability, efficiency against
the benefits of economies of scale
and natural monopoly.
Learners should be able to use
diagrams to illustrate differences in
efficiency.
Learners should have an
awareness of dynamic efficiency
and Pareto efficiency.
economies and dynamic efficiency – getting learners to prove this
diagrammatically can be a good way of reinforcing an understanding of the
underpinning diagrams.
Network and information monopolies are an interesting area here and there
have been some good Economist articles on this area in terms of the
benefits they can bring especially in their growth stages.
Price discrimination again can be used to show some of the benefits of
monopoly power (pharmaceuticals pricing in MEDCS and LEDCS, for
example).
The key is to challenge their automatic assumption that monopoly is bad
and look at evaluative factors such as the role of shareholders,
contestability and the possible role of a regulator.
An interesting discussion to have is the impact of globalisation – local,
regional, national, international monopolies. There are some great stories
on the BBC News Website about companies that were once great
monopolies but no longer exist.
Detailed knowledge of the different
degrees of price discrimination will
not be required.
Diagrammatic approach to price
discrimination will not be required.
22
-
Oligopoly
Explain the main features of
oligopolistic markets and the
concept of interdependence.
Much of this will build on the work already covered in monopoly and the
task here is to look at the ways in which firms actually compete and the
reasons that they might not.
86
23
Use of simple concentration ratios
to measure the extent of market
power is required.
Explain that oligopolistic markets
may be characterised by price and
non-price competition, price
leadership, collusion and price
wars.
Explain and evaluate the potential
costs and benefits of oligopoly.
Learners should understand the
importance of dominant firms in the
context of innovation and the
competitiveness of the whole
economy.
The allocative and productive
efficiency of oligopolistic markets
should be understood.
Use game theory to evaluate
interdependent behaviour in
oligopolistic markets.
When looking at competition, game theory is a fun area to examine the
extent to which price competition will take place, and when it has been
established that it might not, looking at actual competitive behaviour will
bring out many of the key features of the structure, which is permeated by
interdependence.
There are likewise a variety of cartel games that will bring out the reasons
that cartels may arise and the reasons for their collapse – the role of
regulators may be introduced again here when looking at actual cases of
collusion.
Game theory only needs to be looked into at a relatively superficial level –
a two player, 2 decision matrix should suffice, although looking at stable or
unstable matrices and what they tell us will be helpful. There are some
good clips from ‘Goldenballs’ that give a light-hearted insight into strategy
here. The auction of Premier League football rights is also an interesting
application in this area (although in more abstract terms because the
number of players was larger). Prisoners Dilemma is the most useful game
to consider. As an extension, you could consider the difference in outcome
between one-shot and repeated (finitely and infinitely), or different games
e.g. Chicken Game (use the Footloose tractor scene as a great example).
The kinked demand curve allows you to introduce an interesting discussion
on price wars, collusion, sticky prices etc.
Learners should be able to
determine a Nash equilibrium in a
matrix.
87
24
Business
objectives
Explain how firms may have
different objectives, such as
maximisation of profit, revenue or
market share, survival, social and
community objectives.
Learners should understand the
different objectives of the various
stakeholders and be aware of the
concept of satisficing.
Learners will already have looked at profit maximisation before. At this
stage it is important that they are aware of the ownership structure of plcs
and an explanation of the stock exchange is probably advisable if this
hasn’t been covered earlier in the course.
This leads clearly to the divorce of ownership from control and its possible
implications. Consider the principal-agent problem, and link with
asymmetric information.
Looking at the story of Enron can be an interesting lesson as well as the
rise of shareholder activism, to at least, a limited extent in recent years.
This area can also be used to look back at the financial crisis and the
behaviour of the big bankers (RBS?) in pursuing deals that were more in
their own interests than those of the business they were running.
Once it has been established that owners might not be able to control
managers, an examination of managerial objectives can be undertaken and
used as a way of reinforcing diagrams.
25
Privatisation
Explain the way in which
privatisation may increase
competition.
This is an obvious area for the use of case studies, with the recent Royal
Mail privatisation, as well as the return of the east coast main line to private
ownership and Hinchinbrook hospital going the other way.
Learners should understand that
privatisation may take many forms
other than simply transferring the
ownership of state-run assets into
the private sector.
There is plenty of data on the micro and macro implications of the
privatisations of the 80s and 90s around, allowing a retrospective look, but
it is important to look at the more modern forms of privatisation being used
such as contracting out of services such as search and rescue and the
implications that this may have.
Evaluate the effects of privatisation
on competition, efficiency, prices
Renationalisation might well be looked at in the context of the rail sector
with various politicians wanting to take it back into state control. The return
of some franchises to the government allows for a direct comparison of
88
26
Competition
policy
and the whole economy.
state and private control.
Explain the reasons why
governments may be concerned
with competition, monopolies and
mergers in industry.
The focus here should be on the goal of regulation rather than its form and
that some sectors may be more likely to need regulating than others (exstate run industries for example).
Understand the role of competition
authorities and regulators in
promoting competition and
contestability in markets.
Learners should understand that
regulators can affect the degree of
contestability in a market.
Learners should be able to evaluate
the extent to which competition and
contestability are desirable.
Much of the content here will overlap with the evaluation of monopoly and
oligopoly markets from earlier in the term, and that an increase in
competition and contestability isn’t necessarily desirable in all
circumstances (cooperation between firms is permitted under EU law in
certain circumstances, for example).
Probably worth looking at some of the watchdog bodies to see how
regulation works (or not) in practice. Water, Post and Rail all have
interesting features. Also worth looking at the CMA and some of its recent
cases – domestic energy for example.
Consider the reasons for, and implications of, regulatory capture. You could
link really well to the financial crisis and the inability of regulators to predict
it or respond to it.
Detailed knowledge of UK and EU
competition legislation is not
required.
Detailed knowledge of regulatory
policies is not required.
Market
Success
Market Success and Market Failure.
Recap of why markets in theory should allocate resources efficiently
(competition holding down prices and costs, raising quality, consumer
sovereignty/choice, invisible hand, allocative efficiency).
89
27
–
28
Understanding
market failure
Define market failure and have an
understanding of efficiency, that is,
the maximisation of consumer/
producer surplus at the free market
equilibrium output.
Understand that market failure may
take many forms, including
 public goods
 merit and demerit goods
 externalities
 monopoly power
 information asymmetries and
gaps
 an absence of private property
rights
 income inequality
 volatile prices
Appreciate the reasons for,
and the consequences of, each
source of market failure for
economic agents.
Learners should be able to
distinguish between public goods
and private goods.
Learners should be able to draw
and analyse diagrams showing the
external benefits of consumption
Situation in which the free market does not allocate resources optimally in
spite of the advantages highlighted.
Public goods: Non-excludable and non-diminishable. Free rider problem
means that they would not be supplied in a free market leading to a welfare
loss. Touch on cost-benefit analysis and the difficulty of putting economic
values on concepts such as human life.
Monopoly power: Covered under market structures.
Externalities: Cost or benefits to third parties arising from production or
consumption that are not taken into account by the free market, meaning
that equilibrium output will be either too high or too low – thus a
misallocation of resources due to the divergence between social cost and
private cost. SC= PC + EC.
Production externalities: (pollution from production and so on). Social cost
is greater than private cost, therefore such goods will be under-priced and
over-supplied in the free market. Analysis using MSC/MSB diagrams.
Consumption externalities: Merit and Demerit goods. Case studies on
health, education, tobacco, alcohol and cars/roads, using social
cost/benefit analysis and MSC/MSB diagrams where appropriate; these
require some time on them for learners to really understand the welfare
loss, but can be linked back to allocative efficiency diagrams from earlier in
the course.
Information asymmetries: Lop-sided information can damage markets and
in extreme case render them unable to operate at all. Use of used cars
(lemons) and private health insurance as examples.
Absence of property rights – where assets do not have clearly defined
90
and the external costs of
consumption and production.
owners then a price cannot be established and they will be over-used.
Tragedy of the commons, overfishing of cod as case studies.
Learners should be able to derive
the socially efficient level of output
and identify and explain welfare
loss.
Inequalities. Explanation that whilst in theory the market will deliver goods
to those who want them the most as long as incomes are equal, income
inequalities mean that resources will instead go to those with the most
money, therefore reducing total welfare
Volatile prices. Covered under development economics.
91
TERM SIX
Week
29
Specification
Content
Specification Amplification
Further guidance notes
Price volatility,
maximum and
minimum
prices
Explain why and how governments
intervene in markets, for example,
to correct market failure and reduce
income inequality.
Maximum prices: Concept of maximum prices as a ceiling introduced by
governments (e.g. rent controls) and other agencies (sporting/music
events) as a way of securing access to goods/services to all groups and
tackling problems with inequalities.
Explain that, in certain cases,
government intervention can create
distortions in markets, for example,
in agriculture, housing and labour
markets.
Problems such as excess demand, the need for alternative resource
allocation arrangements, possibility of black/unregulated markets emerging
(discuss fair renting in the housing market and the illegal rental agreements
that followed) and the impact on producer revenue (and thus on quality of
provision), producer and consumer surplus.
Understand the reasons for
government failure and be able to
evaluate its effects.
Minimum guaranteed prices – with close reference to agriculture:
Learners should be able to link
policies to the reduction of income
inequality, for example, progressive
taxation and the benefits system,
price stabilisation and guaranteed
minimum price schemes in
agriculture and the national
minimum wage.
Reasons for intervention (agricultural price volatility – use of S/D and
elasticity to illustrate, desire to protect rural incomes/rural way of life,
redistributive effects).
CAP – theory, recent history and reforms – looking at the impact of EU
expansion on the CAP.
Disadvantages of intervention in this fashion – opportunity cost of funds,
cost of storage, impact on consumer surplus, dumping of surplus produce
on world markets (e.g. impact of US powdered milk production on
Jamaican diary industry, US rice on Nicaraguan producers), drive towards
intensive farming methods and the environmental and health side effects
that these create.
92
The national minimum wage was covered in labour markets back in term 1.
30
31
Why and how
governments
intervene in
markets, The
effects of
government
intervention
Explain why and how governments
intervene in markets, for example,
to correct market failure and reduce
income inequality.
Evaluate government intervention
policies.
Governments may intervene by
using policies, such as taxation
(specific and ad valorem taxes),
subsidies, state provision and
regulation, minimum and maximum
prices, use of prices, for example,
road pricing and tradeable pollution
permits.
Simple demand and supply
diagrams should be used.
Taxes and subsidies – full analysis of ad valorem and specific taxes,
looking at the impact of elasticity on the burden and incidence of tax. How
taxes and subsidies can internalise externalities by making private costs
equal to social costs. Problems with estimating the value of external costs –
what is a tree worth?
Regulation – legislative action to force socially efficient outcomes or to
control monopoly power – but costs of administration may prove counterproductive.
Market based solutions – tradable pollution permits – extension of property
rights. Use EU scheme as a case study, problems such as high
administrative costs and the need for a global system. Road pricing – lots
of trial schemes in the UK and across the world using GPS technology.
Direct government provision – public goods and some merit goods – link to
problems with cost-benefit analysis.
The risk of government failure (such as inadequate information,
administrative costs, market distortions) throughout.
Learners should be able to link
policies to the reduction of income
inequality, for example, progressive
taxation and the benefits system,
price stabilisation and guaranteed
minimum price schemes in
agriculture and the national
minimum wage.
93
Learners should be aware of
distortions in markets and examples
of government failure.
32
REVISION
94