Download Literatura

Document related concepts

Newton's laws of motion wikipedia , lookup

Speed of gravity wikipedia , lookup

Free fall wikipedia , lookup

Aristotelian physics wikipedia , lookup

Time in physics wikipedia , lookup

Work (physics) wikipedia , lookup

Navier–Stokes equations wikipedia , lookup

Turbulence wikipedia , lookup

History of fluid mechanics wikipedia , lookup

Transcript
The hydrodynamics of swimming microorganisms
27
to first order in deflection, balance of moments on an element of length dx of the rod
implies
∂M
+ Fy = 0,
(47)
∂x
where Fy = −A∂ 3 h/∂x3 is the y-component of the force exerted through the crosssection at x. Thus, if the rod has a deflection h(x), then an elastic force fy dx =
(∂Fy /∂x)dx = −(A∂ 4 h/∂x4 )dx acts on the element of length dx at x. Balancing
this elastic force with the transverse viscous force from resistive force theory yields a
hyper-diffusion equation
∂h
∂ 4h
(48)
= −A 4 .
∂t
∂x
The shape of the rod is determined by solving Eq. (48) subject to the appropriate
boundary conditions, which are typically zero force and moment at the far end, x = L.
At the near end, common choices are oscillatory displacement h(0, t) = b cos(ωt) with
clamping ∂h/∂x|x=0 = 0, or oscillatory angle ∂h/∂x|x=0 = θ cos(ωt) with h(0, t = 0),
where b/L ≪ 1 and θ ≪ 1 [125, 127].
The appearance of ∂h/∂t in Eq. (48) causes the breakdown of kinematic
reversibility: Even for a reciprocal actuation such as h(0, t) = b cos(ωt), Eq. (48)
implies that the rod shape is given by propagating waves. Physically, the breakdown
of kinematic reversibility occurs because flexibility causes distant parts of the rod to
lag the motion of the rod at the base. We saw in §3 that zero-Re flow is effectively
quasistatic since the diffusion of velocity perturbations is instantaneous. When the
filament is flexible, the time it takes for perturbations in shape to spread along the rod
scales as ξ⊥ L4 /A. Since the shape of the rod does not satisfy kinematic reversibility,
the flow it induces does not either, and a swimmer could therefore use a waving elastic
rod to make net progress.
The wavelength and the decay length of the propagating waves is governed
by a penetration length, ℓ = [A/(ξ⊥ ω)]1/4 . Sometimes this length is given in the
dimensionless form of the “Sperm number,” Sp = L/ℓ = L(ωξ⊥ /A)1/4 . If the rod is
waved rapidly, the penetration length is small ℓ ≪ L and propulsion is inefficient since
most of the filament has small defection and contributes drag but no thrust. For small
frequencies, the rod is effectively rigid ℓ ≫ L, and there is no motion since kinematic
reversibility is restored. Thus, we expect the optimum length for propulsion is ℓ ≈ L,
since at that length much of the rod can generate thrust to compensate the drag of
pulling the filament along x [127, 97]. Note that our discussion of flexibility may be
generalized to other situations; for example, the deformation of a flexible wall near a
swimmer is not reversible, leading to a breakdown of the scallop theorem even for a
swimmer that has a reciprocal stroke [135]. In this case the average swimming velocity
decays with a power of the distance from the wall, and therefore this effect is relevant
in confined geometries.
An interesting variation on the Machin problem is to rotate a rod which is tilted
relative to its rotation axis. If the rod is rigid, then it traces out the surface of a
cone. But if it is flexible, then the far end will lag the base, and the rod has a helical
shape. As long as the tilt angle is not too small, this shape may be determined
without considering effects of twist [136, 137]. If the driving torque rather than speed
is prescribed, there is a transition at a critical torque at which the shape of the rod
abruptly changes from gently helical to a shape which is much more tightly wound
around axis of rotation, with a corresponding increase in thrust force [138, 139, 140].
ξ⊥