Download MEMBRANECYTOPLAST

NON RESORB
NON RESORB
MEMBRANECYTOPLAST
CYTOPLAST®-Membranes
for the implantologist
CYTOPLAST
MEMBRANE
Suture
NEW! PTFE
le!
now availab
CYTOPLAST®
NON RESORB
NON RESORB
MEMBRANE
CYTOPLAST Membranes
CYTOPLAST
CYTOPLAST
®
MEMBRANE
Simple to use – safe for the patients
CYTOPLAST® Non Resorb
CYTOPLAST® TXT-200
Available measurements
12 x 20 mm, 25 x 30 mm
Measurements 25 x 30 mm
CYTOPLAST® TI-250 Titanium-reinforced
CYTOPLAST® RTM Collagen
Available measurements
Available measurements
12 x 20 mm, 14 x 24 mm, 20 x 25 mm
15 x 20 mm, 20 x 30 mm
CYTOPLAST® PTFE Suture material
Length 45 cm
Different types
Non Resorb
CYTOPLAST®®
BICORTICAL
CYTOPLAST® Non Resorb
Cytoplast Non Resorb consists of 100% high-density
PTFE (Polytetrafluoroethylene). Cytoplast Non Resorb is
used primarily for large bone
defects and extractions. The
membrane’s elasticity allows
it to be easily shaped in two
directions. Because the
membrane is d-PTFE, primary
closure is not required.
The membrane is used for
wound coverage and can remain exposed.
l Advantages
•Biocompatibility
• Tissue integration
•Cell occlusion
• Shape stability
• No immunologic reaction
Fibroblast attached to the membrane surface
Cytoplast Non Resorb,
synthetic and safe
Applications
CYTOPLAST® Non Resorb
1 box of 1 membrane,
Order No. 8611
Cytoplast Non Resorb consists of completely homogeneous
material. The standard size of 25 x 30 mm with a thickness
of 0.2 mm can be used in whole or trimmed to fit specific
defect sites and sizes. There is no membrane seam so that
the complete membrane size comes into use.
•After extraction and augmentation, no primary wound
closure required
• Defect therapy
•Placeholder function for providing space for bone
augmentation
• Wound coverage at immediate implant placement
• For periodontal surgery
CYTOPLAST® Non Resorb
1 box of 4 membranes,
Order No. 8610
Measurements
25 x 30 mm
CYTOPLAST® Non Resorb
7 boxes of 4 membranes,
Order No. 8612
CYTOPLAST®
TXT-200
CYTOPLAST® TXT-200
Patented, micro-textured 100% PTFE membrane – non resorbable
This membrane is biologically inert and
chemically non-reactive. It consists of dense
micro-textured PTFE with a pore size less
than 0,3 µm.
Bacteria, which are usually about 2-5 µm,
can’t pass through the membrane, thereby
reducing infections.
Hexagonal surface
dimples provide a
textured surface,
which increases the
area available for
cellular attachment
without increasing
porosity.
l Advantages
•Minimal flap reflection or dissection
•Less surgical time, as membrane can remain exposed
•Preservation of soft tissue architecture, interdental
papilla, and keratinized mucosa
•Soft tissue attaches, but doesn’t grow into the
membrane
•Exposed membrane allows for non-surgical removal;
no anesthesia required
Applications
CYTOPLAST® TXT-200 Singles
1 box of 10 membranes,
Order No. 8621
The Cytoplast TXT membranes are suitable ideally for:
• Large defects
• Thin flaps
• Periodontal defects
• Where primary closure isn’t possible
Measurements 12 x 20 mm
Membrane in a size ideal
for single sites.
Benefits of textured surface
CYTOPLAST® TXT-200
1 box of 4 membranes,
Order No. 8620
The textured surface helps stabilize the membrane and
prevent soft tissue retraction:
• Increases surface area
• Reduces risk of membrane movement
• Reduces flap retraction
• Increases pull-out strength
Measurements 25 x 30 mm
Titanium-reinforced
CYTOPLAST®®
BICORTICAL
CYTOPLAST® TI-250
Titanium-reinforced
Titanium-reinforced, high-density PTFE membrane – non-resorbable
Grade 1 titanium frame increases rigidity and allows
for the creation and preservation of space when
grafting. Hexagonal surface
dimples provide a textured
surface, which increases the
area available for cellular
attachment.
Micro-porosity of less than
0.3 microns prevents both
bacterial and cellular pene-
tration, allowing exposure of
the membrane.
l Advantages
•Grade 1 titanium frame increases rigidity and allows for
the creation and preservation of space when grafting
• Will not collapse into defects with deficient bony architecture
•Various sizes are available to treat a wide variety of
defect types
•Because soft tissue will not grow through the membrane,
removal is much easier than with titanium mesh
•Because Bacteria are 2-5 microns in diameter, they can’t
pass though the membrane if it is left exposed, or becomes
exposed during healing time
Applications
CYTOPLAST TI-250 ANTERIOR narrow
Ideal for narrow single-tooth extraction sites,
especially where one or more bony walls are
missing.
Measurements 12 x 20 mm
CYTOPLAST® TI-250 ANTERIOR
narrow, 1 box of 1 membrane
Order No. 8651
CYTOPLAST® TI-250 ANTERIOR
single, 1 box of 1 membrane
Order No. 8652
CYTOPLAST TI-250 ANTERIOR single
Ideal size and shape for single-tooth extraction
sites, especially where one or more bony
walls are missing.
Measurements 14 x 24 mm
CYTOPLAST TI-250 POSTERIOR single
Designed for grafting posterior extraction
sites and limited ridge augmentation.
CYTOPLAST® TI-250 POSTERIOR
single, 1 box of 1 membrane
Order No. 8653
Measurements 20 x 25 mm
CYTOPLAST®
RTM Collagen
CYTOPLAST® RTM Collagen
Bovine collagen membrane (Type 1) – resorbable
The RTM Collagen Membrane is manufactured from
highly purified type 1 bovine
achilles tendon and allows
a multi-layer construction
tissue integration into outer
layer, while preventing direct
passage of bacteria and epithelial cells.
The unique fiber orientation provides high tensile
strength. The membrane is
cell occlusive and stands out
due to easy handling: either
side may be placed on the
defect.
l Advantages
• Longer, predictable resorption time (26 – 38 weeks), no
risk of particle loss due to premature resorption
• High tensile strength, therefore membrane will not tear
easily when being sutured.
• Cell occlusive, prevents epithelial down growth
• When wet, easily drapable over ridge, but not so flimsy
that it collapses into defect
• No confusion, either side may be placed against the defect
Cytoplast RTM Collagen,
optimized flexibility
Applications
CYTOPLAST® RTM Collagen
Membrane, 1 box of 2 membranes,
Order No. 8643
RTM Collagen Membranes
are used for:
•Periodontal defects
•Sinus lift osteotomies
•Repair of access windows
• Soft tissue augmentation
•Periapical lesions
Measurements 15 x 20 mm
CYTOPLAST® RTM Collagen
Membrane, 1 box of 2 membranes,
Order No. 8644
Measurements 20 x 30 mm
PTFE suture
Step-by-Step
material
®
Sybron Implants
BICORTICAL
CYTOPLAST® PTFE suture material
The Cytoplast suture material is non-resorbable, white and has a
length of 45 cm.
•USP2-0 with an 18.7 mm reverse cutting needle
which is popular for procedures where a longer needle is desired.
Order No. 8660
SP 3-0 with a 16.3 mm reverse cutting needle
• U
is by far the most popular size, especially for dental implant and bone
grafting procedures.
Order No. 8661
SP 4-0 with a 16.3 mm reverse cutting needle
• U
is the most popular of the smaller 4-0 sutures, especially for dental implant
and bone grafting procedures.
Order No.8662
Little to no package memory
SP 4-0 with a 12.7 mm taper point needle
• U
often used on soft tissue grafts and suturing delicate tissues that require
an atraumatic needle.
Order No. 8663
SP 4-0 with a 13.1 mm premium reverse cutting needle
• U
offers over 50% longer cutting edges, giving needles a more slender, defined
shape that greatly decreases the force applied to the needle during surgery.
Order No. 8664
Excellent handling, knots securely
l Advantages
Applications
•Biologically inert & chemically non-reactive; superior
soft tissue reaction
•Monofilament (doesn't wick bacteria), not stiff like most
monofilaments, comfortable for patients
•Maintains tensile strength and keeps the surgical site
reliably closed
•Excellent handling; soft handling and knots securely
• Bone grafting procedures
• Guided tissue regeneration
• Implant surgery
• Periodontal surgery
• Ridge augmentation
• Soft tissue grafts
Premium suture at a reasonable price!
CYTOPLAST® Membranes and Suture material
NON RESORB
NON RESORB
MEMBRANECYTOPLAST
CYTOPLAST
MEMBRANE
Sybron Implant Solutions
A World of Implant Solutions
The dental implant platform of Sybron Dental Specialties (SDS)
brings together three (INNOVA – ORALTRONICS – ATTACHMENTS)
organizations that have been leaders in implant manufacturing,
design and development since the inception of implant dentistry.
Manufacturer:
Osteogenics Biomedical, Inc.
4620 71st Street · Building 78-79 · Lubbock, TX 79424
Customer Service: 806-796-1923 · Fax 806-796-0059
www.cytoplast.com · [email protected]
Distributor in Europe:
Sybron Implant Solutions GmbH
Julius-Bamberger-Straße 8a · 28279 Bremen · Germany
Phone +49 421 43939-0 · Fax +49 421 443936
www.sybronimplants.de · [email protected]
09-0121: 02/09-HDS3-04-GB
With our most respected, innovative implant systems – PITT-EASY®,
ENDOPORE® and SybronPRO™ – we are giving you access to a
world of implant solutions.