Download Retreat® Technical Specification

Retreat® Technical Specification
24” Double Towel Bar
Dimensions:
Stock Numbers:

DN8322BN – 24” Double Towel Bar
Brushed Nickel Finish

DN8322CH – 24” Double Towel Bar
Chrome Finish
Materials:
Double towel bar posts are constructed
of zinc. Bars are constructed of brass.
DN8322
Installation Instructions:
1.
2.
3.
Position the mounting template on the w all in the desired location.
Using a level, align the template and tape it to the w all.
Drill tw o 5/16” holes at each mounting post location that corresponds to your
product.
4. Remove the template from the w all.
5. Fold ends of the plastic toggle together (see Figure 1) and insert into each hole
in the w all.
6. Lightly tap anchors until flush w ith the w all.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor (see Figure 2). Remove pin and repeat on all anchors.
8. Remove mounting posts from the product assemblies by loosening each
setscrew .
9. One at a time, place each mounting post over anchors (notch facing dow nw ard)
and insert screw s through post into anchors.
10. Tighten screw s.
11. Assemble the tow el bar and posts.
12. While assembled, position each end post w ith setscrew s facing dow n and place
over both mounting posts. Tighten the setscrew at the bottom of each post.
Cleaning Instructions:
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Stock Number:__________________Double Towel Bar
By Creative Specialties
2 5 3 0 0 A L MO E N D R I V E  N O R TH O L MS TE D , O H 4 4 0 7 0
C O R P O R A TE H E A D Q U A R TE R S : ( 8 0 0 ) 3 2 1 - 8 8 0 9  F A X: ( 8 0 0 ) 8 4 8 - 6 6 3 6
I N TE R N A TI O N A L : ( 4 4 0 ) 9 6 2 - 2 0 0 0  F A X: ( 4 4 0 ) 9 6 2 - 2 7 2 6
C U S TO ME R S E R V I C E ( U S A ) : 8 0 0 - 8 8 2 - 0 1 1 6  F A X: ( 8 8 8 ) 3 7 9 - 2 7 2 0
W W W . MO E N . C O M
Copyright Creative Specialties International
Literature #BA1327