Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
PRODUCT DATASHEET 1-800-383-7323 1-800-383-7323 / USA USA/CAN 1-800-383-7323 / CANADA www.energizer.com ENERGIZER 346 SILVER OXIDE Specifications Industry Standard Dimensions mm (inches) Chemical System: Silver Oxide (Zn/Ag2O) Nominal Voltage: Typical Capacity: Capacity Test: Typical Weight: Typical Volume: Impedance (40 Hz): 1.55 Volts 9.5 mAh* (to 1.2 volts) 100K ohm continuous drain at 21°C 0.24 grams (0.008 oz.) 0.06 cubic centimeters (0.003 cubic inch) 30 to 40 ohms * Varies according to the applied load, temperature, and cutoff voltage. 7.90 (0.311) 5.30 (0.209) Ref. Typical 7.62 (0.300) 1.30 (0.051) Cross Section R0.40 (0.016) Ref. Typical E 1.14 (0.045) 1.25 (0.049) Ref. LE T 1.05 (0.041) Ref. Anode Cap Gel Anode 0.15 (0.006) Maximum Ref. Permissible deflection from a flat O 0.01 (0.0004) Minimum Ref. (applies to top edge of gasket or edge of crimp, whichever is higher) Gasket Can Separator Cathode DESIGNED FOR USE ON CONTINUOUS LOW DRAIN Temperature Characteristics Typical Performance at 21°C (70°F) Typical Performance at Low Discharge Rates BS Typical Discharge Characteristics Service (%) O 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 Service Effects 125 100 75 50 25 0 -20 0 125 Schedule Continuous 250 375 Service, Hours 500 625 Typical Drains at 1.55V (milliamperes) (ohm) Cutoff 1.2V (hours) 0.016 100K 594 Load 0 20 Temperature (C) 40 Storage Effects 100 Service (%) Voltage, CCV Schedule: Continuous Typical Drain @1.55V: 0.016 milliamperes Load: 100K ohm 0 C 90 20 C 80 70 40 C 60 0 2 4 6 8 Storage Time (yrs) 10 12 Important Notice This datasheet contains typical information specific to products manufactured at the time of its publication. ©Energizer Holdings, Inc. - Contents herein do not constitute a warranty. Form No. EBC - 4317E Page 1 of 1