Download Speech Audiometry

Speech Audiometry
Page 1 of 5
Speech Audiometry – Quick Guide
Description
Most people acquiring hearing aids report trouble hearing speech, or more often trouble hearing speech in
noise. Here speech testing becomes a strong test tool in the assessment of the problem the patient faces.
Speech audiometry employs speech signals and can be used to examine the processing ability and if it is
affected by disorders of the middle ear, cochlea, auditory nerve, brainstem pathway, and auditory centers of
the cortex.
Comprehension
Understanding the meaning
Recognition Discrimination
Can recall the word
Discrimination
Identify differences between words
Reception/ Detection
Can hear speech is present
There is a variety of tests available with speech
testing with the basic speech audiometry being
an assessment of the reception, discrimination
and recognition of speech. Reception refers to
the level at which the patient can hear speech
is present, discrimination refers to the level at
which the patient can discriminate between
words, while recognition refers to the level at
which the patient can recognize and recall the
word.
More advanced speech testing takes into account how speech is understood in the presence of noise, with
various noise types such as white noise, speech noise, babble noise, or running speech as noise source and
provide information about the signal-to-noise ratio (SNR) at which the patient can understand speech. Other
components such as the placement of the speech signal in relation to the noise source and the tonal
differences between the speech signal and the masking signal, is some of the things incorporated into more
advance speech testing.
Speech Detection Threshold (SDT)
Speech detection threshold (SDT) refers to the level at which the patient can hear speech is present in 50%
of the cases.
The speech detection threshold can be used as a cross-check of the air conduction audiometry and should
closely agree with the PTA (Pure Tone Average). The PTA can be calculated in different ways but is usually
the average of thresholds obtained at 500, 1000, and 2000 Hz. It is generally accepted that if the PTA and
the SRT is within ± 6 dB of each other the accordance is good, if it is ±7 to 12 dB it is adequate, and if it is
±13 or more, it is poor.
Note: Speech detection threshold is sometimes referred to as speech reception threshold abbreviated SRT, not to be confused with speech recognition threshold, abbreviated - SRT. For that matter the term
speech detection threshold is used and abbreviated – SDT.
Speech Recognition Threshold (SRT)
The SRT examines at which level 50% of the speech material (usually numbers or spondaic words) is
repeated correctly.
In addition, SRT gives an index of the hearing sensitivity of speech and helps determine the starting point for
other supra-threshold measures such as WR (Word Recognition).
D-0113990-B 2016/11
Speech Audiometry
Page 2 of 5
Word Recognition Score (WR)
WR is sometimes also referred to as SDS (Speech Discrimination Scores) and represents the number of
words correctly repeated, expressed as a percentage of correct (discrimination score) or incorrect
(discrimination loss). Pressing correct means the word is a 100% correct, while incorrect correspond with 0%
correct.
The score can be obtained as a phoneme score that provides information about what phonemes the patient
has difficulty hearing at a particular intensity level. This is helpful for counselling and rehabilitation purposes.
Correct / incorrect (discrimination score / discrimination loss)
In the suite. Correct: A mouse click on this button will store the word as
correctly repeated. The left arrow key can also be used for storing as
correct. Incorrect: A mouse click on this button will store the word as
incorrectly repeated. The right arrow key can also be used to score as
incorrect. Store: A mouse click on this button will store the speech
threshold in the speech graph. A point can also be stored by pressing S.
On the standalone devices. Press incorrect on the keyboard to store the
word as incorrect (0%) or press correct on the keyboard to store the word
as correct (100%).
Phoneme score
When the speech material is indexed according to the
number of phonemes in each word, the soft key
numbers avialable for scoring will be active.
e.g. for a word with two phonemes the soft keys 0,1
and 2 will become available for scoring. The upper the
display in the suites, while the lower displays the
buttons on the standalone audiometer.
When the word is scored with the use of phonemes,
the number of correct phonemes will appear below the
word.
The percentage will be calculated as the numbers of
phonemes correct out of the total number of phonemes
that has been presented up until the given word.
Thereby the storing can be done at any time during the
scoring.
D-0113990-B 2016/11
Speech Audiometry
Page 3 of 5
What is required
•
•
•
Headphones, insert phones, or free field speakers
A microphone, external sound player, or built-in wave files
Talkback Microphone and Talk forward microphone
Test Procedure
Before performing speech audiometry you may wish to do the tone audiogram. This provides valuable
predictive information useful in the speech testing, including information about when masking is needed
during speech testing. For more information about masking please refer to the quick guide ‘Audiometric
masking’.
1)
2)
3)
4)
5)
6)
Press the Tests button and select the speech test.
If needed, select the measurement type (e.g. WR1, WR2, SRT), type of measure (word,
numbers, multi syllabic numbers and multi syllabic words), and list of words using the soft
buttons.
Select the intensity levels for channel 1. If masking is needed configure channel 2 also.
Explain to the patient that he/she will now hear some words/numbers/sentences though the ear
phones/free field speakers. Instruct the patient to repeat what is said even though it may be very
soft. Patients may also be encouraged to guess if they are unsure about the
word/number/sentence. If performing the speech test in noise do not forget to instruct the patient
not to focus on the noise but on the speech.
Press Start to start presenting the words, numbers or sentences.
Based on the settings for speech, the response can be scored as Correct, Incorrect using the
hardkeys or numbers of correct phonemes using the softkeys
.
7)
Click on Store to store the results.
D-0113990-B 2016/11
Speech Audiometry
Page 4 of 5
Speech results
Table mode
The SRT/WR displayed as a table allows for measuring multiple SRTs using different test parameters, e.g.
Transducer, Test Type, Intensity, Masking, and Aided together with the SRT or WR score.
Graph mode
When showing the SRT in graph mode the speech audiogram calculates the SRT value based on the norm
curve (the distance in dB from the point where the norm curve crosses 50% to the point where the speech
curve crosses 50%) like shown below. The result is then an expression of how much you need to turn up the
level compared to normal in order for the patient to be able to repeat 50%.
Use the m-curve for multi syllabic words and the s-curve if using single syllabic words. The curves can be
edited according to the normative data you wish to use in the speech settings.
Note that the norm curves change based on the speech material. You must therefore ensure that WR1, WR2
or WR3 is linked to single or multisyllabic words to show the SRT. Calculating the WR SRT is only available
when using the suite.
Speech setup
When running the speech test using wavefiles, the tester can decide to present manually, continuously or
timeout for the speech setup.
Manual mode allows the tester to manually press the Tone Switch/Enter button to present the
word and then score it as Incorrect of Correct before moving on to the next word.
In Continuous mode, the next word will automatically be presented after scoring incorrect or correct.
In the Time Out mode, the word played will be scored as either correct or incorrect if no
scoring is entered within 1 to 5 seconds.
D-0113990-B 2016/11
Speech Audiometry
Page 5 of 5
Speech in Noise
Problems understanding speech in noise is a common complaint from people with hearing loss. Having the
ability to test the patient with speech in noise provides useful information about the impact of the hearing loss
on the patient’s ability to communicate. It also provides information about whether the patient is actually
getting the expected benefit from the hearing aids when communicating in noisy environments.
Testing the patient in a speech in noise setup can be done using a free field setup either by presenting the
speech signal and noise signal from the same speaker or alternatively, separating the speech signal and
noise signal by presenting the signal from two different speakers. It can be done by presenting the signal and
noise to the same ear on the AC40 or by selecting the test speech in noise on the AD629.
Binaural speech
If the intention is to present the speech signal to both ears at the same time this is done by
selecting the same output for both channels on the AC40. On the AD629 the binaural speech is
selected by choosing the test Speech - Ch2on. Note this is only available with the AD629
extended.
References
Stach, B.A (1998) Clinical Audiology: An introduction, Cengage Learning
D-0113990-B 2016/11