Download EcoView Multi

Technical Specification Sheet
Document No. 149-1019
December 19, 2011
EcoView™ Multi-phase Meter
6.59
(167.39)
Description
6.10
(154.94)
The EcoView Multi-phase Meter is the multi-phase
power meter component of the EcoView System. It is
capable of measuring three-phase four-wire 240V wye
of up to 1200 Amps. The unit also has the ability to
interface to third-party water and gas meters via two
pulse inputs.
RSSI
NET
PWR
TM
Factory calibrated, three-phase Current Transformers
(CTs) must be ordered separately.
G
Multi-phase Meter
N
ØA
4.34
(110.24)
ØB
MTR
PWR
Technical Specifications
ØC
MTR-1
MTR-2
A-CT B-CT C-CT
24VAC
•
120 Vac three-phase four-wire wye w/ neutral.
•
240 Vac single-phase three-wire.
Power and Reference Voltage
•
For Single Phase and Three phase operation the
unit receives its operating power and reference
voltage from the ØA and N (Neutral) sense input.
Current Transformers
•
200A, 400A, 800A, and 1200A CTs supported.
•
Max 25’ run from CTs to Multi-phase Meter.
•
Split core for easy (no disconnect) installation.
ECO0016R1
Electrical Services Supported
1.84
(46.74)
Device-to-Panel Communications
•
ZigBee 802.15.4 two-way link to Touchscreen.
•
Range of 75 to 300 feet depending on local
conditions.
•
Mesh networking with other EcoView products
allowing for greater range.
•
Range boosting available via ZigBee Repeater.
Pulse Inputs
Siemens Industry, Inc.
•
Two optically isolated channels.
•
0 to 2000 PPS.
•
2.5 to 15V pulses.
•
Either contact closure or electronic pulses.
•
Can source power for remote devices.
Page 1 of 2
•
LED Indicators
−
•
Power.
•
Net: Indicates healthy radio link to Touchscreen.
•
RSSI: Packet transmission indicator.
•
CT1-CT3: Red/Green to indicate proper CT
direction.
•
Connectors
•
1 ea. 6 pin pluggable connector for currents.
1 ea. 10 position, 5 pin pluggable connector for
reference voltage input.
•
Phase A, B, C: Two wires each.
2 ea. 3 pin pluggable connector for pulse inputs.
−
12 Vdc Power out (Power to contact closure or
remote pulse generator source)
−
Pulse.
−
Common.
1 ea. Pulse input power.
−
12 Vdc, supplies power to isolated meter input
circuitry for contact sensing.
−
Phase A (Board Power).
−
Phase B.
Physical/Environmental
−
Phase C.
−
•
6.6” L × 4.3”W × 1.8”H (16.8 × 10.9 × 4.6 cm)
Neutral.
−
•
-4°F to 140°F (-20°C to 60°C)
Ground.
General Specifications
Radio
PROS2B
Frequency Range
ISM 2.4GHz
Channels
15 (11-25)
Equipment Class
Digital Modulation System (DTS)
Agency Approvals
FCC Part 15.247 FCC ID: MCQ-PROS2B
FCC Part 15, Unintentional Radiators, Class B
Industry Canada (IC) IC: 1846A-PROS2B
ICES-003, Issue 4, Class B
CE
Ordering Information
Part Number
Description
56-001
EcoView Multi-phase Meter
56-200
3-Phase Current Transformer, 200A (set of 3)
56-400
3-Phase Current Transformer, 400A (set of 3)
56-800
3-Phase Current Transformer, 800A (set of 3)
56-1200
3-Phase Current Transformer, 1,200A (set of 3)
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. EcoView is a trademark of Siemens Industry, Inc. Other product or company names mentioned herein may
be the trademarks of their respective owners. © 2011 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
Retail and Commercial Systems
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
+1-847-215-1000
For EcoView system support, please call
1 + 877-306-9400
Your feedback is important to us. If you have
comments about this document, please send them to
[email protected].
Document No. 149-1019
Printed in the USA
Page 2 of 2