Download CSP-L Seismic Energy Source

: Technical Specification
CSP-L Seismic Energy Source
The CSP-L is a seismic energy source for high resolution boomer
sub-profiling applications, intended for use primarily as part of
the Applied Acoustics’ Inshore Boomer System. Available as a 50
Joule or 100 Joule unit, the CSP-L uses minimal generator current.
The 50J design can operate at 8 pps and produces a high
resolution pulse when used with the AA201 boomer plate.The
CSP-L 100J variant produces greater penetration at up to 4 pps
with the same transducer. It is ideal for inshore survey work.
Key Features
: Cutting edge power supply
technology evolved from years of
field use.
: Operates from the smallest
possible generator.
: Reliability and security with global
after sales service and support
from the world's leading seismic
power source manufacturer.
: Contains proprietary pulse shaping
circuitry for optimisation of high
resolution boomer data.
: Meets EC emissions regulations
enabling interference-free field and
laboratory use.
: Additional safety/protection
features including ‘Safety OFF’
button and key-switch operation.
: LCD read-out includes repetition
rate display.
: LED fault indicators.
: High current and voltage solid
state (semiconductor) discharge
method.
CSP-L
: Supplied with robust transit case, mains
lead and H.V. connector plug.
Applied Acoustic Engineering Ltd
T
+44(0)1493 440355
Marine House, Marine Park
F
+44(0)1493 440720
Gapton Hall Road
E
[email protected]
Great Yarmouth NR31 0NB
W
www.appliedacoustics.com
United Kingdom
: Technical Specification - CSP-L
PHYSICAL SPECIFICATION
Dimensions
Weight
Transit case (4U) with cover in place and handles flat: H 24cm x W 54cm x D 44.5cm
CSP-L, case and cover: 18.5 kg
ELECTRICAL SPECIFICATION
Mains Input
Voltage Output
115-240 VA. [email protected] kVA(max) Single Phase,3 pin connector
3500 volts DC, 4 pin interlocked connector. Solid state semi-conductor discharge method
Output Energy
CSP-L 50
CSP-L 100
Two models available
50 Joules
100 Joules
Charging Rate
500J/second for continuous operation at 0 - 45°C ambient
Trigger
+ve key opto isolated or closure set by front panel switch
BNC connector on front panel and remote box (optional)
Repetition Rate
Up to 8.0 pps at 50 Joules. Up to 4.0 pps at 100J
Earth
M8 stainless steel stud on front panel
Internal Design
A Modular approach allows for easy servicing and capacitor replacement
(For safety reasons, only factory trained technicians should attempt a repair)
SAFETY FEATURES
Main electronic control circuits and secondary layer of safety circuitry
Specially designed HV connector with interlock
High speed dump resistors for high voltage components
Capacitor bleed resistors
Open circuit shutdown
Timer shutdown
Output current monitor
Short circuit protected
Over temperature shut-down
Cover and connector interlocks
COMPATIBILITY SOUND SOURCES
CSP-L 50 & 100
AA201 and AA301 Boomer Plates
Due to continual product improvement, specification information may be
subject to change without notice.
© Applied Acoustic Engineering Limited/CSP-L/March 2010