Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
INSTALLATION NOTES: dAlta-5,-7 and dLuna-4,-6 1. Caution and Safety Instructions • Qualified personnel must install and/or service product in a manner consistent with its intended use and in compliance with the National Electrical Code, Canadian Electrical Code, and/or all local and provincial codes. • Follow all product label information and installation instructions. • Turn off power at the fuse or circuit breaker before installation or servicing. • The use of damaged components may cause an unsafe condition and void the product warranty. • Do not block light emanating from the product in whole or part. • Never operate the fixture with a missing or damaged lens. Clean the lens on a regular basis. • The entire fixture may become extremely hot. Do not touch the hot lens or fixture body. Do not touch the light source at any time. • Keep all O-rings and sealing surfaces clean during installation and servicing; failure to do this may lead to premature failure of the product. 2. Product Information Tools Needed: • ⅛" Allen wrench (installation) dAlta-7 3YJ8 dAlta-5 Power Requirements Low Voltage (LV) dLuna-6 Input Power 12V Dimming Phase or PMW Number of Wires 2 dLuna-4 ARCHITECTURAL & LANDSCAPE LIGHTING | holmlighting.com A Hunter Industries Company INSTALLATION NOTES: dAlta-5,-7 and dLuna-4, -6 3. Product Installation Diagrams the lens(es) off. Repeat to remove multiple lenses. Once removed, reattach the new color and/or beam angle lens by lining up the bayonet mount and twisting clockwise 1/4 turn while gently pressing down. If using an accessory lens (e.g., hex baffle, spread lens, etc.), insert the lens into the back end of the shroud to mate with the glass lens. Reinstall the lens cap by firmly pressing it past the double O-rings and flush with main fixture. Complete the servicing by refastening the setscrew. Waterproof connection Servicing The LED board in this product is designed to offer years of use without replacement. If a failure occurs, please contact the local authorized manufacturer’s representative. Weep hole Setscrew Installation Guidelines The dAlta-5, -6, and -8 models are integrated LED fixtures capable of housing various LED boards designed by Holm. The size of each fixture corresponds to the size of each compatible LED board. For example: dAlta-5 (1LED), dBeam-6 (1LED, 3LED, and ZDC), or dAlta-8 (1LED, 3LED, 6LED, 9LED, and ZDC). Installation Requirements Install all three models in the upward facing direction only. Ensure the fixture is aligned in a manner such that the setscrew and weep hole are pointed downward. Using these models as a down lights may lead to failure. Changing or Removing Lenses To add or remove a color filter, beam angle lens, or accessory lens, loosen the setscrew (5/64 hex) and twist the lens cap back and forth while simultaneously pulling out. Once the lens cap is removed, twist the top lens 1/4 turn counterclockwise to release the bayonet lock and lift DO NOT EXCEED 15 VOLTS IN THIS FIXTURE The LEDs in this product function ideally when the incoming voltage is between 10-15 volts. Voltages outside of this range may damage LEDs, shorten their lives, and cause unsatisfactory performance. The use of improper voltage voids the product warranty. Use only a UL 1838 approved power supply such as the Holm PROlink transformer series. RISK OF FIRE WARNING: DO NOT USE HOLM FIXTURES WITH ANY STYLE OF TRANSFORMER THAT EXCEEDS 15 VOLTS ON THE SECONDARY. Holm does NOT recommend the use of Quick Clip style connectors or pre-filled wire nuts because they are not waterproof and can deteriorate,creating resistance and shorts. STATEMENT OF LIMITED WARRANTY Hunter® Industries Incorporated (“Hunter”) warrants Holm lighting products to be free of defects in materials or workmanship under normal use for a period of five (5) years from the date of invoice. See the complete warranty statement at www.holmlighting.com. ARCHITECTURAL & LANDSCAPE LIGHTING | holmlighting.com Customer Service 1-844-200-4656 Holm-006-dAlta-US 04/17