Download Other configuration of control gears

CONTROL GEARS
configuration of control gears
B - inductive uncompensated control gear
a
Inductive uncompensated control gear is suitable for lower outputs and systems with small quantity of light
fittings. It is equipped by low-loss chokes in standard and it is connected by 3-pole terminal plate enabling
the looping. Control gear is the part of light fittings for compact fluorescent lamps.
Picture a) 1x7 W, 1x9 W, 1x11 W, 1x13 W, 1x18 W, 1x26 W
Picture b) 2x7 W, 2x9 W, 2x11 W, 2x13 W, 2x18 W, 2x26 W
45
200x65
b
50
Example of order code assembly: V289sD2B.218/HL.SB
200x112
K - inductive compensated control gear
a
Inductive compensated control gear is suitable for higher outputs or realizations with bigger quantity of light
fittings. It is equipped by low-loss chokes in standard and the connection is finished by 3-pole terminal plate
enabling the looping. Compensation increases power factor of main. Control gear is the part of light fittings for
compact fluorescent lamps.
Picture a) 1x7 W, 1x9 W, 1x11 W, 1x13 W, 1x18 W, 1x26 W
Picture b) 2x7 W, 2x9 W, 2x11 W, 2x13 W, 2x18 W, 2x26 W
45
200x65
b
50
Example of order code assembly: V289sD2K.218/HL.SB
E - electronic undimmable control gear
200x112
a
56
Electronic undimmable ballast declines power consumption even by 30%. It increases lifetime of light sources
and quality of light emission by economical start. Connection is finished by 3-pole terminal plate enabling the
looping. Control gear is the part of light fittings for compact fluorescent lamps.
200x81
Picture a) maximum size for all outputs
Example of order code assembly: V289sD4E.218/HL.SB
M - electronic undimmable control gear MULTIWATT
Electronic undimmable control gear MULTIWATT is characterized by the same properties as standard
electronic undimmable ballast. Its advantage is ability of operation with light sources of various outputs (by
one source 26,32 or 42W and by two sources 32 or 42W). Control gear is the part of light fittings for
compact fluorescent lamps
Picture a) maximum size for all outputs
Example of order code assembly: V289sD4M.142/T1.SB
248
a
56
200x81
DIMMING
configuration of dimmable ballasts
A - electronic ballast Analogical dimmable – by voltage 1-10V
a
Control by analogical voltage 1-10V.
Connection to central control, presence sensors and sensors of daylight and to emergency source are possible.
It is suitable for smaller rooms, where easy manual control is required. It is useful for offices, for small conference
rooms, classrooms, flats etc.
62
250x104
Picture a) maximum size for all outputs
Example of order code assembly: V289sD4A.218/HL.SB
T - electronic ballast dimmable – by power button
a
Simple and cheap controller by standard button 230V.
Switching-on, switching-out and dimming of light fitting are realized in dependence on time of button holding.
It provides easy installation, memory of the last state, synchronization of light fittings, possibility of connection
to emergency module. It is suitable for offices, small conference rooms, classrooms, flats etc.
62
250x104
Picture a) maximum size for all outputs
Example of order code assembly: V289sD4T.218/HL.SB
S - electronic ballast dimmable - Digital DSI
a
Digital control through protocol DSI.
Individual light fittings in system but have not its address. It means that all fittings are dimmed on the same
level of output. It is suitable solution for bigger installation central controlled by switchboards DSI.
62
250x104
Picture a) maximum size for all outputs
Example of order code assembly: V289sD4S.218/HL.SB
D - electronic ballast dimmable - Digital DALI
Digital addressable dimming – every light fitting of system is identifiable.
Control from central board or PC – programming of light scenes. Central control and programming of individual
light fittings, connection of daylight sensors, movement sensors and connection to emergency module are
possible. It is suitable for big light systems – department stores, supermarkets, hotels, restaurants, hospitals,
airports etc.
a
62
250x104
Picture a) maximum size for all outputs
Example of order code assembly: V289sD4D.118/HL.SB
249