Download PowerStation - Advanced Energy

PowerStation
™
1 to 2 MW Turnkey Base Station
for Multiple Inverters
•Fully integrated 1.0, 1.25, 1.33, 1.5
and 2 MW solar power stations
•1334 A max output current (per 1 MW)
•> 99.4% efficiency medium-voltage transformer (standard option)
•Simple, single-winding secondary
•All-in-one power conversion system for low-cost, loop-feed installation
•No enclosure required for inverter operation
•Custom designs available
Solaron inverters already provide maximum energy harvests with 97.5%
CEC and 98.5% peak efficiencies—at half the current of competing units.
Integrated in the PowerStation conversion system, the inverters are
connected in parallel to a single-winding, high-efficiency, medium-voltage
transformer that costs far less than custom, dual-winding transformers.
All necessary AC switch gear and electronics are included in the compact
base station for easy, lower-cost shipment and installation.
®
Benefits
Improves Levelized Cost of Energy (LCOE) for large projects
Turnkey managed solution
Significantly reduces project engineering, material, and field labor costs
Simplifies connections between DC array and grid
Easy, fast, and repeatable installation.
Features
1.0, 1.25, 1.33, 1.5 and 2 MW
Open and enclosed, pre-engineered, configurations
2 MW open PowerStation™ solution, one of ten standard designs.
Custom options available.
All-in-one, pre-assembled, pre-tested systems
Ready to connect with all required electrical components in one place
Higher-efficiency, lower-cost, single-winding MV transformer
Suitable for all climates—with or without an enclosure
Dimensions (L x H x W)
1 MW Open
290 x 137 x 106 inches
737 x 348 x 269 cm
355 x 132 x 120 inches
902 x 355 x 305 cm
464 x 137 x 106 inches
1179 x 348 x 269 cm
528 x 132 x 120 inches
1341 x 355 x 305 cm
464 x 137 x 106 inches
1179 x 348 x 269 cm
528 x 132 x 120 inches
1341 x 355 x 305 cm
464 x 137 x 106 inches
1179 x 348 x 269 cm
528 x 132 x 120 inches
1341 x 355 x 305 cm
464 x 137 x 106 inches
1179 x 348 x 269 cm
528 x 132 x 120 inches
1341 x 355 x 305 cm
1 MW Enclosed
1.25 MW Open
1.25 MW Enclosed
1.33 MW Open
1.33 MW Enclosed
1.5 MW Open
1.5 MW Enclosed
2 MW Open
2 MW Enclosed
Summary Specifications
Physical
Construction
Exterior
Environmental Rating
Mounting
Options
1 MW Open
1 MW Encl
Achieve Higher
Efficiency and
Reduce Balance-ofSystem Costs
Weight
30,100 lbs
13,653 kgs
31,000 lbs
14,061 kgs
45,100 lbs
20,457 kgs
52,000 lbs
23,587 kgs
45,100 lbs
20,457 kgs
52,000 lbs
23,587 kgs
43,100 lbs
19,550 kgs
52,000 lbs
23,587 kgs
47,500 lbs
21,546 kgs
57,000 lbs
25,855 kgs
1.5 MW Open
To connect your project
to the grid for greater efficiency
and less electrical complexity,
the PowerStation solution from
Advanced Energy is the simple
and affordable choice. Contact
us today at +1.970.221.0108,
or visit www.aesolaron.com
for more information.
1.5 MW Encl
2 MW Open
2 MW Encl
Powder-coated steel base; aluminum exterior walls and roof (enclosed configurations)
NEMA3R, NEMA 4 (inverter electronics)
Concrete slab or pier foundation options
Revenue-grade metering
DC disconnects (standard)
DC circuit re-combining (standard)
Aux power circuits (e.g. tracker motors, service equipment, etc); 240/120VAC convenience power (standard)
Service lighting
Insulation
Customer-specified options
Electrical
1 MW
1.5 MW
Max Power
Output Power (Per Solaron 500 kW Inverter)
432 to 528 VAC, 3 Φ, 60 Hz, grounded Wye connection
Voltage Range
60 Hz
Frequency
> 0.97 typical
Line Power Factor
AC Current Distortion/TDD < 5%
600 A typical
AC Line Current
2 MW
®
Peak Efficiency
CEC Efficiency
Input Power
Array Configuration
Voltage
MPP DC Current
Medium-Voltage Transformer
AC Voltage Range
Efficiency
DC Disconnect (Optional)
Environmental
Ambient Operating
Temperature
Storage Temperature
Relative Operating Humidity
Atmospheric Pressure
Elevation
Regulatory
Directives and Standards
Warranty
PowerStation
™
Solaron Inverters
®
667 A max at 86°F (30°C) and low-line voltage; can be limited with field-adjustable settings
630 A max at 122°F (50°C)
98.5%
97.5%
Bipolar, dual-array using standard PV modules
± 330 to ± 600 VDC
750 ADC max
Secondary (inverter side): 432 to 528 VAC, 3 Φ, 60 Hz, grounded Wye connection
Primary: broad range of MV primary voltage configurations available
>99.4% (standard option)
600 or 1000 VDC
-4°F to 122°F (-20°C to 50°C )
Cold weather option to -35°C
-40°F to 158°F (-40°C to 70°C )
0% to 95% non-condensing
800 to 1060 mbar (80 to 106 kPa)
6000’ (1828.8 m) max
NRTL certified to UL 1741-2005 by CSA International
UL QRNZ for walk-in electrical equipment
2008 NEC
ANSI/NFPA 70-1999 Ed
Industrial Control Equipment -UL-508 15th Ed CAN/CSA C22.2 No. 14-M91
CEC Eligible – 97.5%
One-year standard warranty for the PowerStation, integrated BoS equipment, and workmanship
Extended warranty options available
Five-year standard warranty, extendable up to 20 years
Specifications are subject to change without notice.
Advanced Energy Industries, Inc. • 20720 Brinson Blvd. PO Box 7348 • Bend, 97708 OR U.S.A.
T: 877.312.3832 • [email protected] • www.advanced-energy.com/renewables
Please see www.advanced-energy.com for worldwide contact information.
Advanced Energy is a U.S. trademark of Advanced Energy Industries, Inc. • SEEDS is a trademark of SunEdison.
®
© Advanced Energy Industries, Inc. 2011
All rights reserved. Printed in U.S.A.
ENG-PowerStation-250-03 0M 6/11