Download - IEEE Mentor

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Low-voltage differential signaling wikipedia , lookup

Network tap wikipedia , lookup

Cracking of wireless networks wikipedia , lookup

IEEE 1394 wikipedia , lookup

Deep packet inspection wikipedia , lookup

IEEE 802.11 wikipedia , lookup

Quality of service wikipedia , lookup

Power over Ethernet wikipedia , lookup

IEEE 1355 wikipedia , lookup

UniPro protocol stack wikipedia , lookup

Transcript
March 2014
doc.: IEEE 11-14/0xxx
Discussion on power save mode for real
time traffic
Date: 2014-03-16
Authors:
Name
Affiliations
Address
Giwon Park
LG Electronics
19, Yangjae-daero
11gil, Seocho-gu
Seoul 137-130,
Korea
Kiseon Ryu
LG Electronics
Jeongki Kim
LG Electronics
Suhwook Kim
LG Electronics
HanGyu Cho
LG Electronics
Submission
Phone
Slide 1
email
[email protected]
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Abstract
This presentation discusses on power save mode with real
time traffic for High Efficiency WLAN.
Submission
Slide 2
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Characteristics on Real Time Traffic (1/3)
1.1 Buffered Video streaming [1, 2]
•
Video streaming is typically unidirectional traffic
•
Video streaming applications have lenient QoS requirements
•

Delay tolerable (the video can take several seconds to cue up)

Jitter tolerable (because of application buffering).
Uses buffer time that is the amount of video content in seconds to cache on the user’s
computer or device before playback of the video can begin.

•
After playout, buffering is highly dependant on network speed.
Protocol stack: TCP

Provides additional reliability
1.2 Live Video streaming [1, 2]
•
Unidirectional traffic
•
Not lenient QoS requirements
•

Delay sensitive

Jitter sensitive
Protocol stack: TCP/UDP

Submission
Depending on implementation (using either TCP or UDP), reliable transmission can be supported.
Slide 3
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Characteristics on Real Time Traffic (2/3)
2. Video Conferencing [1, 2]
•
•
•
Two-way traffic
Typical protocol: UDP/IP
Require lower packet loss ratio at MAC since UDP does not
provide additional reliability

•
Delay and Jitter sensitive


Submission
Loss should be no more than 1 percent.
One-way latency (mouth to ear) should be no more than 150ms.
Average one-way jitter should be targeted at less than 30ms.
Slide 4
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Characteristics on Real Time Traffic (3/3)
3. Voice over IP [1, 2]
•
•
•
Two-way traffic
Typical protocol: UDP/IP
Require lower packet loss ratio at MAC since UDP does not
provide additional reliability

•
Delay and Jitter sensitive


•
One-way latency (mouth to ear) should be no more than 150ms.
Average one-way jitter should be targeted at less than 30ms.
In general, On-Off Model is used for VoIP Traffic Modeling.

Submission
Loss should be no more than 1 percent.
Because, Human speech consists of talk-spurts (on period) and
silence gaps (off period).
Slide 5
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Recap: 802.11 Power Save Mode (1/4)
1. Power Save Poll (PS-Poll)
•
•
During sleeping periods, access points buffer any unicast frames
or broadcast frames for sleeping stations.
To retrieve buffered frames, newly awakened stations use PS-Poll
frames.
TIM (in
Beacon)
AP
STA
Sleep
Data
Listen
PS-Poll
ACK
Sleep
Contending
Figure 1. Power Save Poll
Submission
Slide 6
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Recap: 802.11 Power Save Mode (2/4)
2. Unscheduled automatic power-save delivery (U-APSD)
•
When an AP delivers downlink frames to STAs operation with
power saving mode including U-APSD, it has to confirm that they
are awake. An uplink data or null-data frame is used to trigger
downlink frames.
U-SP
U-SP
EOSP=1
Q-AP
Q-STA
ACK
Sleep
EDCA
delay
Trigger
Frame +
Data
Data
(more 1)
EOSP=1
Data
(more 0)
ACK
ACK
ACK
Sleep
Trigger
Frame +
Data
Data
(more 0)
ACK
Sleep
Figure 2. Traffic flow with U-APSD
Submission
Slide 7
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Recap: 802.11 Power Save Mode (3/4)
3. Scheduled automatic power-save delivery (S-APSD)
•
•
•
QoS-STA negotiates a APSD schedule with QoS AP.
QoS AP start transmitting the frames at Service Start Time.
QoS-STA must wake up at Service Start Time and the following
periods to receive frames.
DL data
ACK
ACK
Q-STA
UL data
Service Period
Service
Start Time
ACK
ACK
DL data
Q-AP
UL data
Service Period
Service Interval
Service
Start Time
Figure 3. Traffic flow with S-APSD
Submission
Slide 8
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Recap: 802.11 Power Save Mode (4/4)
4.
Power Save Multi-Poll (PSMP)
•
•
AP will send a schedule during its own TXOP as to when to be awake to
receive data and also schedule as to when to transmit.
Since this schedule is known Stations can sleep more and also at the same
time not miss any frames.
Scheduled UL DL
information
STA 2
PSMP-DTT
STA 2
PSMP-DTT
STA 3
STA 3
Submission
Slide 9
PSMP-UTT
STA1
STA 1
PSMP-DTT
STA 1
PSMP-UTT
STA1
PSMP
AP
PSMP-UTT
STA1
PSMP-Uplink
PSMP-Downlink
Figure 4. Power Save Multi-Poll
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Summary (1/2)
Application
Buffered
Video
Streaming
Video
Streami
ng
Live Video
Streaming
Video Conferencing
1
Characteristics
802.11 power save
mode1
• Delay and Jitter tolerable
• Reliable transmission is
supported (using TCP)
• Power Save Poll (PS-Poll)
• Delay and Jitter sensitive
• Depending on implementation
(using either TCP or UDP),
reliable transmission can be
supported.
• There may not be proper
power save mode.
• Non-AP STA can be awake
while receiving this type of
service.
• Delay and Jitter sensitive
• Reliable transmission is not
supported2 (using UDP)
• APSD (U-APSD/S-APSD)
This column shows 802.11 power save mode which is generally used for each type of traffic.
using UDP, lower packet loss ratio in WLAN is required than using TCP.
2 When
Submission
Slide 10
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Summary (2/2)
Applications
VoIP (without
silence
suppression3)
VoIP
VoIP (with
silence
suppression)
Characteristics
802.11 Power save
mode
• Delay and Jitter sensitive
• Reliable transmission is not
supported (using UDP)
• Not support silence suppression
function
• APSD (U-APSD/S-APSD)
• Power Save Multi Poll
(PSMP)
• Delay and Jitter sensitive
• Reliable transmission is not
supported (using UDP)
• Support silence suppression
function
• Current power save mode
does not consider the
operation of VoIP with
silence suppression.
3The
term silence suppression is used in telephony to describe the process of not transmitting information over the network
when one of the parties involved in a telephone call is not speaking, thereby reducing bandwidth usage.
Submission
Slide 11
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
Conclusion
• We introduced all types of real time traffic and 802.11 power save
mode in this contribution.
• We analyzed that real time traffic such as live video streaming and
VoIP with silence suppression may not be efficiently supported by the
current 802.11 power save mode.
• Even other traffic such as buffered video streaming, video
conferencing, and VoIP without silence suppression may also be
needed to be enhanced as environments become dense.
• In conclusion, we need to study 802.11 power save mode enhancement
for real time traffic in high efficiency WLAN.
Submission
Slide 12
Giwon Park, LG Electronics
March 2014
doc.: IEEE 11-14/0xxx
References
[1] Lync Conference 2013, Lync Mobile Devices and Wi-Fi
[2] 11-13-1162-01-0hew-video-categories-and-characteristics
[3] Cisco, Quality of Service Design Overview
[4] Cisco, Real-Time Traffic over Wireless LAN Solution Reference
Network Design Guide
[5] ACM CoNEXT 2011, Network Characteristics of Video Streaming
Traffic
[6] Harkirat Singh,“Enhanced Power Saving in Next Generation
Wireless LANs”, IEEE 2006
[7] 11-10-1054-00-00ac-wide-band-obss-friendly-psmp
[8] IEEE 802.11™-2012
Submission
Slide 13
Giwon Park, LG Electronics