Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Aluminum Stearate Aluminum stearate surfactant is a powdered defoamer used primarily in water-base muds. Typical Physical Properties Physical appearance���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� White powder Odor ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� Mild Specific gravity ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������>1.00 Solubility in water ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� Negligible Applications Aluminum stearate surfactant is insoluble in water. To achieve the best results, it should be mixed with diesel, low-toxicity mineral oil or a synthetic base fluid and slowly dripped into the system. Normally, 5 to 10 lb/100 bbl of mud gives adequate defoaming results. Mix 1-2 viscosity cups of Aluminum stearate per 5-gal diesel, low-toxicity mineral oil or synthetic base fluid prior to adding to the drilling fluid. Advantages • Widely available, economical defoaming agent • Concentrated chemical that is very effective at low treatment levels • Can be used in most water-base drilling fluids Limitations • Not recommended for use in invert emulsion mud systems (oil-base mud or synthetic-base mud) Toxicity and Handling Bioassay information is available upon request. Handle as an industrial chemical, wearing protective equipment and observing the precautions described in the Material Safety Data Sheet (MSDS). Packaging and Storage Aluminum stearate surfactant is packaged in multi-wall, paper sacks with plastic liners. Packing container sizes vary based on local area of purchase. Keep container tightly closed in a dry and well-ventilated place. This document is supplied solely for informational purposes and M-I SWACO makes no guarantees or warranties, either expressed or implied, with respect to the accuracy and use of this data. All product warranties and guarantees shall be governed by the Standard Terms of Sale. Nothing in this document is legal advice or is a substitute for competent legal advice. ©2006 M-I L.L.C. All rights reserved. XPB.3004.0603.R1 (E) P.O. Box 42842 Houston, Texas 77242-2842 www.miswaco.com E-mail: [email protected]