Download TERMSERIES (TIA) Presentation

TERMSERIES Interface Adapter TIA
TERMSERIES Interface Adapter (TIA) - Overview
Connection to a variety of
controllers
The standardized ribbon cable plugin connections enable connection of
all the interface system's preassembled cable types.
Reliable and unambiguous wiring
Installation is unambiguous and safe thanks to
practical marking of the connections.
assignment of the contacts and the option of
individual marking using MultiCard.
Both types of logic with one device
The potential switch for the lower level
allows the adapter for plus and minus
switching logic to be used.
Fast supply and bridging of the auxiliary voltage
Quick and safe supply of the auxiliary voltage as a
result of the TOP connection with "PUSH IN"
technology. Simple bridging is also possible thanks
to duplication of the connections.
Page 2
Two widths of the adapter to match the widths of the TERMSERIES
Narrow design(TIA)
For 8 piece TERMSERIES with 6.4 mm width
 TIA F10, 1463520000
 TIA SUB-D 15 S, 1463530000
Wide design (TIAL)
For 8 piece TERMSERIES with 12.8 mm width
 TIAL F10, 1463540000
For 16 piece TERMSERIES with 6.4 mm width
 TIAL F20, 1463550000
Page 3
One-size-fit-all: Only one version for all kind off application
Thanks to its symmetrical structure. the
adapter can be connected to both
TERMSERIES coil and contact connections.
The use of positive and negative switching
logic is also possible for the lower level with
the help of the potential changeover switch
(1).
(1)
Page 4
Fast supply and bridging of the auxiliary voltage
Quick and safe supply of the auxiliary voltage as
a result of the TOP connection with "PUSH IN"
technology. Simple bridging is also possible
thanks to duplication of the connections.
Page 5
Reliable and simple wiring
Installation is simple. clear. and safe thanks to
practical marking of the connections (1).
assignment of the contacts (2) and the option of
individual marking using MultiCard (3).
(2)
(1)
(3)
Page 6
New contact principle
In the contact system of TERMSERIES interface
adapter a new contact principle will be used.
Two contact plates connect the bus bar side
wise. By embossing. both plates are fixed so they
build up a spring effect. which makes a sticky
contact. even under vibration.
Small tabs on the plates snap behind the bus bar.
therefore. the adapter snaps noticeably and
audibly. and the adapter is optimally fixed in the
relay block.
Page 7
Connection with our remote I/O system u-remote
Use our perfectly matched cable harness for
connecting our u-remote DI/DO sub assemblies
and TERMSERIES relays.
U-Remote:
- UR20-16DO-P-PLC-INT. 1315270000
- UR20-16DI-P-PLC-INT. 1315210000
TERMSERIES Adapter
- TIAL F20. 1463550000 + 16 pieces TERMSERIES
Page 8
Product overview
TIA F10. 1463520000:
10 pole flat-cable connector to 8 * 6.4 mm TERMSERIES
TIAL F10. 1463540000:
10 pole flat-cable connector to 8 *12.8 mm TERMSERIES
TIAL F20. 1463550000:
20 pole flat-cable connector to 16 * 6.4 mm TERMSERIES
TIA SUB-D 15 S. 1463530000:
15 pole SUB-D connector to 8 * 6.4 mm TERMSERIES
Page 9