Download QUOTATION Digital oscilloscope

EMIN Vietnam Joint Stock Company
Certificate of Business Registration: 0105309275
Headquarter in Ha Noi City:
Add : No 8A, Hoang Cau Moi Street, Dong Da Distric, Ha Noi, Vietnam
Tel : (04) 35.381.269 - (04) 35.381.270 - ( 04) 35.381.271 - (04) 35.381.272
Fax : (04) 35 190 360;
Email: [email protected]
Branch in Ho Chi Minh City:
Add: No 218, Cong Hoa Street, Ward 12, Tan Binh District, Ho Chi Minh City, Viet
Tel: (08) 3811 96 36 - (08) 3811 93 59 - (08) 3811 62 13
Fax : (08) 3811 95 45 ;
Email: [email protected]
QUOTATION
Digital oscilloscope
To:
Company:
Address:
Email:
Tel:
Fax
Thank you very much for your requirement and we would like to offer you the price as under:
Commodity
Description
GDS-1052-U
Digital
Oscilloscopes
GW Instek
GDS-1052-U
(50Mhz, 2
Channel)
VERTICAL
Channels
Bandwidth
Rise Time
Sensitivity
Accuracy
Input Coupling
Input Impedance
Polarity
Maximum Input
Waveform Signal
Process
Offset Range
Bandwidth Limit
TRIGGER
Sources
Modes
Coupling
2
DC ~ 50MHz (-3dB)
<7ns Approx.
2mV/div ~ 10V/div (1-2-5 increments)
±(3% x |Readout|+0.1 div + 1mV)
AC, DC & Ground
1M±2%, ~15pF
Normal & Invert
300V (DC+AC peak), CATII
+ , - , FFT
2mV/div ~ 50mV/div : ±0.4V , 10mV/div ~ 500mV/d
1V/div ~ 5V/div : ±40V , 10V/div:±300V
20MHz (-3dB)
CH1 , CH2 , Line , EXT
Auto, Normal, Single, TV, Edge, Pulse Width
AC , DC , LF rej. , HF rej. , Noise rej.
Sensitivity
EXT TRIGGER
Range
Sensitivity
Input Impedance
Maximum Input
HORIZONTAL
Range
DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~50/70/ 100MHz: Approx. 1.5div or 15mV
±15V
DC ~ 25MHz : ~ 50mV ; 25M ~ 50/70/100MHz : ~15
1MΩ±2% , ~ 16pF
300V (DC AC peak) , CATII
1ns/div ~ 10s/div (1-2.5-5 increments); ROLL : 50m
50s/div
Main, Window, Window Zoom, Roll, X-Y
±0.01%
10 div maximum
1000 div
Modes
Accuracy
Pre-Trigger
Post-Trigger
X-Y MODE
X-Axis Input
Channel 1
Y-Axis Input
Channel 2
Phase Shift
±3° at 100kHz
SIGNAL ACQUISITION
Real-Time Sample
250MSa/s maximum
Rate
Equivalent Sample
25GSa/s maximum
Rate
Vertical Resolution
8 Bits
Record Length
4K Dots maximum
Acquisition Mode
Normal, Peak Detect, Average
Peak Detection
10ns (500ns/div ~ 10s/div)
Average
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256
CURSORS AND MEASUREMENT
Voltage
Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin ,
Measurement
Preshoot/Overshoot , Fall Preshoot/Overshoot
Time Measurement Freq , Period , Rise Time , Fall Time , Positive Width ,
Width , Duty Cycle
Cursors
Voltage difference between cursors (ΔV)
Measurement
Time difference between cursors (ΔT)
Auto Counter
Resolution : 6 digits
Accuracy : ±2%
Signal Source: All available trigger source except the
trigger mode
CONTROL PANEL FUNCTION
Autoset
Automatically adjusts Vertical VOLTS/DIV, Horizontal
TIME/DIV, and Trigger level
Save Setup
Up to 15 sets of measurement conditions
Save Waveform
15 sets of waveform
DISPLAY
TFT LCD Type
Display Resolution
Display Graticule
Display Brightness
INTERFACE
USB Slave Connector
USB Host
POWER SOURCE
Line Voltage Range
MISCELLANEOUS
Multi-Language
Menu
Online Help
Go/NoGo Function
Data Logger
DIMENSIONS &
WEIGHT
5.7 inch
234 (Vertically) x 320 (Horizontally) Dots
8 x 10 divisions
Adjustable
USB1.1 & 2.0 full speed compatible (printers and flas
supported)
Image (BMP), waveform data (CSV), and setup (SET)
AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection
Available
Available
Available
Available
310(W) x 142(H) x 140(D)mm; Approx. 2.5kg
Warranty: 12 months
Manufacturer: Gwinstek - Taiwan
Origin: Taiwan
GDS-1072-U
Digital
Oscilloscopes
GW Instek
GDS-1072-U
(70Mhz, 2
Channel)
VERTICAL
Channels
Bandwidth
Rise Time
Sensitivity
Accuracy
Input Coupling
Input Impedance
Polarity
Maximum Input
Waveform Signal
Process
Offset Range
Bandwidth Limit
TRIGGER
Sources
Modes
2
DC ~ 70MHz (-3dB)
<5ns Approx.
2mV/div ~ 10V/div (1-2-5 increments)
±(3% x |Readout|+0.1 div + 1mV)
AC, DC & Ground
1M±2%, ~15pF
Normal & Invert
300V (DC+AC peak), CATII
+ , - , FFT
2mV/div ~ 50mV/div : ±0.4V , 10mV/div ~ 500mV/d
1V/div ~ 5V/div : ±40V , 10V/div:±300V
20MHz (-3dB)
CH1 , CH2 , Line , EXT
Auto, Normal, Single, TV, Edge, Pulse Width
Coupling
Sensitivity
EXT TRIGGER
Range
Sensitivity
Input Impedance
Maximum Input
HORIZONTAL
Range
AC , DC , LF rej. , HF rej. , Noise rej.
DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~50/70/ 100MHz: Approx. 1.5div or 15mV
±15V
DC ~ 25MHz : ~ 50mV ; 25M ~ 50/70/100MHz : ~15
1MΩ±2% , ~ 16pF
300V (DC AC peak) , CATII
1ns/div ~ 10s/div (1-2.5-5 increments); ROLL : 50m
50s/div
Main, Window, Window Zoom, Roll, X-Y
±0.01%
10 div maximum
1000 div
Modes
Accuracy
Pre-Trigger
Post-Trigger
X-Y MODE
X-Axis Input
Channel 1
Y-Axis Input
Channel 2
Phase Shift
±3° at 100kHz
SIGNAL ACQUISITION
Real-Time Sample
250MSa/s maximum
Rate
Equivalent Sample
25GSa/s maximum
Rate
Vertical Resolution
8 Bits
Record Length
4K Dots maximum
Acquisition Mode
Normal, Peak Detect, Average
Peak Detection
10ns (500ns/div ~ 10s/div)
Average
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256
CURSORS AND MEASUREMENT
Voltage
Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin ,
Measurement
Preshoot/Overshoot , Fall Preshoot/Overshoot
Time Measurement Freq , Period , Rise Time , Fall Time , Positive Width ,
Width , Duty Cycle
Cursors
Voltage difference between cursors (ΔV)
Measurement
Time difference between cursors (ΔT)
Auto Counter
Resolution : 6 digits
Accuracy : ±2%
Signal Source: All available trigger source except the
trigger mode
CONTROL PANEL FUNCTION
Autoset
Automatically adjusts Vertical VOLTS/DIV, Horizontal
TIME/DIV, and Trigger level
Save Setup
Up to 15 sets of measurement conditions
Save Waveform
DISPLAY
TFT LCD Type
Display Resolution
Display Graticule
Display Brightness
INTERFACE
USB Slave Connector
USB Host
POWER SOURCE
Line Voltage Range
MISCELLANEOUS
Multi-Language
Menu
Online Help
Go/NoGo Function
Data Logger
DIMENSIONS &
WEIGHT
15 sets of waveform
5.7 inch
234 (Vertically) x 320 (Horizontally) Dots
8 x 10 divisions
Adjustable
USB1.1 & 2.0 full speed compatible (printers and flas
supported)
Image (BMP), waveform data (CSV), and setup (SET)
AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection
Available
Available
Available
Available
310(W) x 142(H) x 140(D)mm; Approx. 2.5kg
Warranty: 12 months
Manufacturer: Gwinstek - Taiwan
Origin: Taiwan
GDS-1072A-U
Digital
Oscilloscopes
GW Instek
GDS-1072A-U
(70Mhz, 2
CH,1Gsa/s)
VERTICAL
Channels
Bandwidth
2
DC
~70MHz(-3dB)
Rise Time
<5ns Approx.
Sensitivity
2mV/div ~ 10V/div (1-2-5
increments)
Accuracy
±(3% x |Readout| + 0.1 div
+ 1mV)
Input Coupling AC, DC & Ground
Input
1MΩ±2%, ~15pF
Impedance
Polarity
Normal & Invert
Maximum
300V (DC+AC peak), CATII
Input
Waveform
+ , - , x, FFT, FFTrms ,Zoom
Signal Process FFT
Offset Range 2mV/div ~ 50mV/div: ±0.4V
100mV/div ~ 500mV/div:
±4V
1V/div ~ 5V/div: ±40V
10V/div: ±300V
Bandwidth
Limit
TRIGGER
Sources
Modes
Coupling
Sensitivity
20MHz (-3dB)
CH1 , CH2 , Line , EXT
Auto, Normal, Single, TV,
Edge, Pulse Width
AC , DC , LF rej. , HF rej. ,
Noise rej.
DC ~ 25MHz: Approx. 0.5div
or 5mV;
25MHz ~ 70/100/150MHz:
Approx. 1.5div or 15mV
EXT TRIGGER
Range
±15V
Sensitivity
DC ~ 25MHz : ~ 50mV ;
25M ~ 70/100/150MHz :
~15mV
Input
1MΩ±2% , ~ 15pF
Impedance
Maximum
300V (DC AC peak) , CATII
Input
HORIZONTAL
Range
1ns/div ~ 50s/div (1-2.5-5
increments); ROLL :
50ms/div ~ 50s/div
Modes
Main, Window, Window
Zoom, Roll, X-Y
Accuracy
±0.01%
Pre-Trigger
10 div maximum
Post-Trigger
1000 div
X-Y MODE
X-Axis Input Channel 1
Y-Axis Input Channel 2
Phase Shift
±3°at 100kHz
SIGNAL ACQUISITION
Real-Time
1GSa/s maximum
Sample Rate
Equivalent
25GSa/s maximum
Sample Rate
Vertical
8 Bits
Resolution
2 Mega Points maximum
Acquisition
Normal, Peak Detect,
Mode
Average
Peak Detection 10ns (500ns/div ~ 10s/div)
Average
2 , 4 , 8 , 16 , 32 , 64 , 128 ,
256
CURSORS AND MEASUREMENT
Voltage
Vpp ,Vamp ,Vavg ,Vrms ,Vhi
Measurement ,Vlo ,Vmax ,Vmin ,Rise
Preshoot/Overshoot ,Fall
Preshoot/Overshoot
Time
Freq ,Period ,Rise Time ,Fall
Measurement Time ,Positive Width
,Negative Width ,Duty Cycle
Cursors
Voltage difference between
Measurement cursors (V)
Time difference between
cursors (T)
Auto Counter Resolution : 6 digits
Accuracy: 2%
Signal Source: All available
trigger source except the
Video trigger mode
ADJUSTABLE PROBE COMPENSATION
SIGNAL
Frequency
1kHz ~ 100kHz, 1kHz/STEP
Range
Duty Cycle
5% ~ 95%, 5%/STEP
Range
CONTROL PANEL FUNCTION
Autoset
Adjust Vertical VOLT/DIV,
Horizontal TIME/DIV, and
Trigger level automatically
Save Setup
Up to 15 sets of
measurement conditions
Save
15 sets of waveform
Waveform
DISPLAY
TFT LCD Type 5.7 inch
Display
234(Vertically) x
Resolution
320(Horizontally) Dots
Display
8 x 10 divisions
Graticule
Display
Adjustable
Brightness
INTERFACE
USB Device
USB1.1 & 2.0 full speed
compatible (Pictbridge
Compatibility Printers
Supported)
USB Host
Image (BMP), waveform
data (CSV), and setup (SET)
POWER SOURCE
Line Voltage AC 100V ~ 240V , 48Hz ~
Range
63Hz , Auto selection
MISCELLANEOUS
MultiLanguage
Available
Menu
Onscreen Help Available
DIMENSIONS & WEIGHT
310(W) x 142 (H) x
140(D)mm, Approx. 2.5kg
Warranty: 12 months
Manufacturer: Gwinstek - Taiwan
Origin: Taiwan
GDS-11
Digital
Oscilloscopes
GW Instek
GDS-1102-U
(100Mhz, 2
Channel)
VERTICAL
Channels
Bandwidth
Rise Time
Sensitivity
Accuracy
Input Coupling
Input Impedance
Polarity
Maximum Input
Waveform Signal
Process
Offset Range
Bandwidth Limit
TRIGGER
Sources
Modes
Coupling
Sensitivity
EXT TRIGGER
Range
Sensitivity
Input Impedance
Maximum Input
HORIZONTAL
2
DC ~ 100MH
<3.5ns A
2mV/div ~ 10V/div (1-2-5 increments)
±(3% x |Readout|+0.1 div + 1mV)
AC, DC & Ground
1M±2%, ~15pF
Normal & Invert
300V (DC+AC peak), CATII
+ , - , FFT
2mV/div ~ 50mV/div : ±0.4V , 10mV/div ~ 500mV/d
1V/div ~ 5V/div : ±40V , 10V/div:±300V
20MHz (-3dB)
CH1 , CH2 , Line , EXT
Auto, Normal, Single, TV, Edge, Pulse Width
AC , DC , LF rej. , HF rej. , Noise rej.
DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~50/70/ 100MHz: Approx. 1.5div or 15mV
±15V
DC ~ 25MHz : ~ 50mV ; 25M ~ 50/70/100MHz : ~15
1MΩ±2% , ~ 16pF
300V (DC AC peak) , CATII
Range
1ns/div ~ 10s/div (1-2.5-5 increments); ROLL : 50m
50s/div
Main, Window, Window Zoom, Roll, X-Y
±0.01%
10 div maximum
1000 div
Modes
Accuracy
Pre-Trigger
Post-Trigger
X-Y MODE
X-Axis Input
Channel 1
Y-Axis Input
Channel 2
Phase Shift
±3° at 100kHz
SIGNAL ACQUISITION
Real-Time Sample
250MSa/s maximum
Rate
Equivalent Sample
25GSa/s maximum
Rate
Vertical Resolution
8 Bits
Record Length
4K Dots maximum
Acquisition Mode
Normal, Peak Detect, Average
Peak Detection
10ns (500ns/div ~ 10s/div)
Average
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256
CURSORS AND MEASUREMENT
Voltage
Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin ,
Measurement
Preshoot/Overshoot , Fall Preshoot/Overshoot
Time Measurement Freq , Period , Rise Time , Fall Time , Positive Width ,
Width , Duty Cycle
Cursors
Voltage difference between cursors (ΔV)
Measurement
Time difference between cursors (ΔT)
Auto Counter
Resolution : 6 digits
Accuracy : ±2%
Signal Source: All available trigger source except the
trigger mode
CONTROL PANEL FUNCTION
Autoset
Automatically adjusts Vertical VOLTS/DIV, Horizontal
TIME/DIV, and Trigger level
Save Setup
Up to 15 sets of measurement conditions
Save Waveform
15 sets of waveform
DISPLAY
TFT LCD Type
5.7 inch
Display Resolution
234 (Vertically) x 320 (Horizontally) Dots
Display Graticule
8 x 10 divisions
Display Brightness
Adjustable
INTERFACE
USB Slave Connector USB1.1 & 2.0 full speed compatible (printers and flas
supported)
USB Host
POWER SOURCE
Line Voltage Range
MISCELLANEOUS
Multi-Language
Menu
Online Help
Go/NoGo Function
Data Logger
DIMENSIONS &
WEIGHT
Image (BMP), waveform data (CSV), and setup (SET)
AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection
Available
Available
Available
Available
310(W) x 142(H) x 140(D)mm; Approx. 2.5kg
Warranty: 12 months
Manufacturer: Gwinstek - Taiwan
Origin: Taiwan
GDS-1102A-U
Digital
Oscilloscopes
GW Instek
GDS-1102A-U
(100Mhz, 2
CH,1Gsa/s)
VERTICAL
Channels
Bandwidth
2
DC
~100MHz(-3dB)
Rise Time
<3.5ns Approx.
Sensitivity
2mV/div ~ 10V/div (1-2-5
increments)
Accuracy
±(3% x |Readout| + 0.1 div
+ 1mV)
Input Coupling AC, DC & Ground
Input
1MΩ±2%, ~15pF
Impedance
Polarity
Normal & Invert
Maximum
300V (DC+AC peak), CATII
Input
Waveform
+ , - , x, FFT, FFTrms ,Zoom
Signal Process FFT
Offset Range 2mV/div ~ 50mV/div: ±0.4V
100mV/div ~ 500mV/div:
±4V
1V/div ~ 5V/div: ±40V
10V/div: ±300V
Bandwidth
20MHz (-3dB)
Limit
TRIGGER
Sources
CH1 , CH2 , Line , EXT
Modes
Auto, Normal, Single, TV,
Edge, Pulse Width
Coupling
Sensitivity
AC , DC , LF rej. , HF rej. ,
Noise rej.
DC ~ 25MHz: Approx. 0.5div
or 5mV;
25MHz ~ 70/100/150MHz:
Approx. 1.5div or 15mV
EXT TRIGGER
Range
±15V
Sensitivity
DC ~ 25MHz : ~ 50mV ; 25M
~ 70/100/150MHz : ~15mV
Input
1MΩ±2% , ~ 15pF
Impedance
Maximum
300V (DC AC peak) , CATII
Input
HORIZONTAL
Range
1ns/div ~ 50s/div (1-2.5-5
increments); ROLL :
50ms/div ~ 50s/div
Modes
Main, Window, Window
Zoom, Roll, X-Y
Accuracy
±0.01%
Pre-Trigger
10 div maximum
Post-Trigger
1000 div
X-Y MODE
X-Axis Input Channel 1
Y-Axis Input
Channel 2
Phase Shift
±3°at 100kHz
SIGNAL ACQUISITION
Real-Time
1GSa/s maximum
Sample Rate
Equivalent
25GSa/s maximum
Sample Rate
Vertical
8 Bits
Resolution
2 Mega Points maximum
Acquisition
Normal, Peak Detect,
Mode
Average
Peak Detection 10ns (500ns/div ~ 10s/div)
Average
2 , 4 , 8 , 16 , 32 , 64 , 128 ,
256
CURSORS AND MEASUREMENT
Voltage
Vpp ,Vamp ,Vavg ,Vrms ,Vhi
Measurement ,Vlo ,Vmax ,Vmin ,Rise
Preshoot/Overshoot ,Fall
Preshoot/Overshoot
Time
Freq ,Period ,Rise Time ,Fall
Measurement Time ,Positive Width
,Negative Width ,Duty Cycle
Cursors
Voltage difference between
Measurement cursors (V)
Time difference between
cursors (T)
Auto Counter Resolution : 6 digits
Accuracy: 2%
Signal Source: All available
trigger source except the
Video trigger mode
ADJUSTABLE PROBE COMPENSATION
SIGNAL
Frequency
1kHz ~ 100kHz, 1kHz/STEP
Range
Duty Cycle
5% ~ 95%, 5%/STEP
Range
CONTROL PANEL FUNCTION
Autoset
Adjust Vertical VOLT/DIV,
Horizontal TIME/DIV, and
Trigger level automatically
Save Setup
Up to 15 sets of
measurement conditions
Save
15 sets of waveform
Waveform
DISPLAY
TFT LCD Type 5.7 inch
Display
234(Vertically) x
Resolution
320(Horizontally) Dots
Display
8 x 10 divisions
Graticule
Display
Adjustable
Brightness
INTERFACE
USB Device
USB1.1 & 2.0 full speed
compatible (Pictbridge
Compatibility Printers
Supported)
USB Host
Image (BMP), waveform data
(CSV), and setup (SET)
POWER SOURCE
Line Voltage
AC 100V ~ 240V , 48Hz ~
Range
63Hz , Auto selection
MISCELLANEOUS
MultiLanguage
Available
Menu
Onscreen Help Available
DIMENSIONS & WEIGHT
310(W) x 142 (H) x
140(D)mm, Approx. 2.5kg
Specification
Digital
Oscilloscopes
GW Instek
GDS-2072A
(70Mhz, 2
CH,2Gsa/s)
GDS2072A
Channels
Bandwidth
Rise time
2ch+Ext
DC~70MHz
(-3dB)
5ns
20MHz
Bandwidth Limit
Vertical Sensitivity
8 bit
Resolution
:1mV*~10V/div(*:when the vertical scale is set to 1mv/div,the bandwidth limit will be set to 20MHz
automatically)
Input Coupling
AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
±(3% X |Readout| + 0.1div + 1mV)when 2mV/div or greater is selected
DC Gain Accuracy
±(5% X |Readout| + 0.1div + 1mV)when 1mV/div is selected;
Polarity
Maximum Input
Voltage
Normal & Invert
300Vrms, CAT I (300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
1mV/div ~ 20mV/div : ±0.5V
Offset Position
50mV/div ~ 200mV/div : ±5V
Range
500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform
+, -, ×, ÷, FFT, FFTrms ,d/dt ,∫dt ,√ ,Integration*,
Signal Process
required”
Differentiation* *: App installation
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman-Harris.
Trigger
Source
CH1 ,CH2, CH3*, CH4*, Line, EXT, D0-D15**
*four channel models only ;** Logic analyzer option only
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, EventTrigger Type
Delay(1~65535 events), Time-Delay(Duration,10nS~10S), Logic*, Bus* (*with DS2-08LA or DS216LA option)
Holdoff range
10ns~10s
Coupling
AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity
DC ~ 100MHz Approx. 1div or 1.0mV
100MHz ~ 200MHz Approx. 1.5div or 15mV
200MHz ~ 300MHz Approx. 2div or 20mV
External Trigger
Range
±15V
DC ~ 100MHz Approx. 100mV
Sensitivity
100MHz ~ 200MHz Approx. 150mV
200MHz ~ 300MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal
Time base Range
1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1000 div maximum.
Time base
Accuracy
Real Time Sample
Rate
±20 ppm over any ≥ 1 ms time interval
Max.:2GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
Max:2Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection
2ns (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Y-Axis Input
Channel 1; Channel 3*
*four channel models only
Channel 2; Channel 4*
*four channel models only
Phase Shift
±3° at 100kHz
Cursors and Measurement
Cursors
Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
Automatic
Measurement
Control Panel
Function
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width,
Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase
Cursors measurement
Auto counter
Autoset
6 digits, range from 2Hz minimum to the rated bandwidth
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo
Autoset
Save Setup
20set
Save Waveform
24set
Display
TFT LCD Type
Display
Resolution
Interpolation
8" TFT LCD SVGA color display
800 horizontal × 600 vertical pixels (SVGA)
Sin(x)/x & Equivalent Time Sampling
Waveform Display Dots, vectors, variable persistence (16ms~10s), infinite persistence
Waveform Update
Rate
GDS-1152A-U
Digital
Oscilloscopes
GW Instek
GDS-1152A-U
(150Mhz, 2
CH,1 Gsa/s)
VERTICAL
Channels
Bandwidth
2
DC
~150MHz(3dB)
Rise Time
<2.3ns
Approx.
Sensitivity
2mV/div ~ 10V/div (1-2-5
increments)
Accuracy
±(3% x |Readout| + 0.1
div + 1mV)
Input Coupling AC, DC & Ground
Input
1MΩ±2%, ~15pF
Impedance
Polarity
Normal & Invert
Maximum
300V (DC+AC peak), CATII
Input
Waveform
+ , - , x, FFT, FFTrms
Signal Process ,Zoom FFT
Offset Range 2mV/div ~ 50mV/div:
±0.4V
100mV/div ~ 500mV/div:
±4V
1V/div ~ 5V/div: ±40V
10V/div: ±300V
Bandwidth
20MHz (-3dB)
Limit
TRIGGER
Sources
CH1 , CH2 , Line , EXT
Modes
Coupling
Sensitivity
Auto, Normal, Single, TV,
Edge, Pulse Width
AC , DC , LF rej. , HF rej. ,
Noise rej.
DC ~ 25MHz: Approx.
0.5div or 5mV;
25MHz ~ 70/100/150MHz:
Approx. 1.5div or 15mV
EXT TRIGGER
Range
±15V
Sensitivity
DC ~ 25MHz : ~ 50mV ;
25M ~ 70/100/150MHz :
~15mV
Input
1MΩ±2% , ~ 15pF
Impedance
Maximum
300V (DC AC peak) , CATII
Input
HORIZONTAL
Range
1ns/div ~ 50s/div (1-2.5-5
increments); ROLL :
50ms/div ~ 50s/div
Modes
Main, Window, Window
Zoom, Roll, X-Y
Accuracy
±0.01%
Pre-Trigger
10 div maximum
Post-Trigger 1000 div
X-Y MODE
X-Axis Input Channel 1
Y-Axis Input Channel 2
Phase Shift
±3°at 100kHz
SIGNAL ACQUISITION
Real-Time
1GSa/s maximum
Sample Rate
Equivalent
25GSa/s maximum
Sample Rate
Vertical
8 Bits
Resolution
2 Mega Points maximum
Acquisition
Normal, Peak Detect,
Mode
Average
Peak
10ns (500ns/div ~ 10s/div)
Detection
Average
2 , 4 , 8 , 16 , 32 , 64 , 128
, 256
CURSORS AND MEASUREMENT
Voltage
Vpp ,Vamp ,Vavg ,Vrms
Measurement ,Vhi ,Vlo ,Vmax ,Vmin ,Rise
Time
Measurement
Cursors
Measurement
Auto Counter
Preshoot/Overshoot ,Fall
Preshoot/Overshoot
Freq ,Period ,Rise Time ,Fall
Time ,Positive Width
,Negative Width ,Duty Cycle
Voltage difference between
cursors (V)
Time difference between
cursors (T)
Resolution : 6 digits
Accuracy: 2%
Signal Source: All available
trigger source except the
Video trigger mode
PROBE COMPENSATION
ADJUSTABLE
SIGNAL
Frequency
1kHz ~ 100kHz, 1kHz/STEP
Range
Duty Cycle
5% ~ 95%, 5%/STEP
Range
CONTROL PANEL FUNCTION
Autoset
Adjust Vertical VOLT/DIV,
Horizontal TIME/DIV, and
Trigger level automatically
Save Setup
Up to 15 sets of
measurement conditions
Save
15 sets of waveform
Waveform
DISPLAY
TFT LCD Type 5.7 inch
Display
234(Vertically) x
Resolution
320(Horizontally) Dots
Display
8 x 10 divisions
Graticule
Display
Adjustable
Brightness
INTERFACE
USB Device
USB1.1 & 2.0 full speed
compatible (Pictbridge
Compatibility Printers
Supported)
USB Host
Image (BMP), waveform
data (CSV), and setup
(SET)
POWER SOURCE
Line Voltage AC 100V ~ 240V , 48Hz ~
Range
63Hz , Auto selection
MISCELLANEOUS
MultiLanguage
Available
Menu
Onscreen Help Available
DIMENSIONS & WEIGHT
310(W) x 142 (H) x
140(D)mm, Approx. 2.5kg
Warranty: 12 months
Manufacturer: Gwinstek - Taiwan
Origin: Taiwan
Specification
Digital
Oscilloscopes
GW Instek
GDS-2102A
(100Mhz, 2
CH,2Gsa/s)
GDS2102A
Channels
2ch+Ext
DC~100MHz
Bandwidth
(-3dB)
Rise time
3.5ns
20MHz
Bandwidth Limit
Vertical Sensitivity
8 bit
Resolution
:1mV*~10V/div(*:when the vertical scale is set to 1mv/div,the bandwidth limit will be set to 20MHz
automatically)
Input Coupling
AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
±(3% X |Readout| + 0.1div + 1mV)when 2mV/div or greater is selected
DC Gain Accuracy
±(5% X |Readout| + 0.1div + 1mV)when 1mV/div is selected;
Polarity
Maximum Input
Voltage
Normal & Invert
300Vrms, CAT I (300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
1mV/div ~ 20mV/div : ±0.5V
Offset Position
50mV/div ~ 200mV/div : ±5V
Range
500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform
+, -, ×, ÷, FFT, FFTrms ,d/dt ,∫dt ,√ ,Integration*,
Signal Process
required”
Differentiation* *: App installation
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman-Harris.
Trigger
Source
CH1 ,CH2, CH3*, CH4*, Line, EXT, D0-D15**
*four channel models only ;** Logic analyzer option only
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-
Trigger Type
Delay(1~65535 events), Time-Delay(Duration,10nS~10S), Logic*, Bus* (*with DS2-08LA or DS216LA option)
Holdoff range
10ns~10s
Coupling
AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity
DC ~ 100MHz Approx. 1div or 1.0mV
100MHz ~ 200MHz Approx. 1.5div or 15mV
200MHz ~ 300MHz Approx. 2div or 20mV
External Trigger
Range
±15V
DC ~ 100MHz Approx. 100mV
Sensitivity
100MHz ~ 200MHz Approx. 150mV
200MHz ~ 300MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal
Time base Range
1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1000 div maximum.
Time base
Accuracy
Real Time Sample
Rate
±20 ppm over any ≥ 1 ms time interval
Max.:2GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
Max:2Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection
2ns (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Y-Axis Input
Channel 1; Channel 3*
*four channel models only
Channel 2; Channel 4*
*four channel models only
Phase Shift
±3° at 100kHz
Cursors and Measurement
Cursors
Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
Automatic
Measurement
Control Panel
Function
Auto counter
Autoset
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width,
Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase
Cursors measurement
6 digits, range from 2Hz minimum to the rated bandwidth
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo
Autoset
Save Setup
20set
Save Waveform
24set
Display
TFT LCD Type
8" TFT LCD SVGA color display
Display Resolution800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent Time Sampling
Waveform Display Dots, vectors, variable persistence (16ms~10s), infinite persistence
Waveform Update
Rate
Specification
Digital
Oscilloscopes
GW Instek
GDS-2074A
(70Mhz, 4
CH,2Gsa/s)
GDS2074A
Channels
4ch+Ext
DC~70MHz
Bandwidth
(-3dB)
Rise time
5ns
20MHz
Bandwidth Limit
Vertical Sensitivity
8 bit
Resolution
:1mV*~10V/div(*:when the vertical scale is set to 1mv/div,the bandwidth limit will be set to 20MHz
automatically)
Input Coupling
AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
DC Gain Accuracy
±(3% X |Readout| + 0.1div + 1mV)when 2mV/div or greater is selected
±(5% X |Readout| + 0.1div + 1mV)when 1mV/div is selected;
Polarity
Maximum Input
Voltage
Normal & Invert
300Vrms, CAT I (300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
1mV/div ~ 20mV/div : ±0.5V
Offset Position
50mV/div ~ 200mV/div : ±5V
Range
500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform
+, -, ×, ÷, FFT, FFTrms ,d/dt ,∫dt ,√ ,Integration*,
Signal Process
required”
Differentiation* *: App installation
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman-Harris.
Trigger
Source
CH1 ,CH2, CH3*, CH4*, Line, EXT, D0-D15**
*four channel models only ;** Logic analyzer option only
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-
Trigger Type
Delay(1~65535 events), Time-Delay(Duration,10nS~10S), Logic*, Bus* (*with DS2-08LA or DS216LA option)
Holdoff range
10ns~10s
Coupling
AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity
DC ~ 100MHz Approx. 1div or 1.0mV
100MHz ~ 200MHz Approx. 1.5div or 15mV
200MHz ~ 300MHz Approx. 2div or 20mV
External Trigger
Range
±15V
DC ~ 100MHz Approx. 100mV
Sensitivity
100MHz ~ 200MHz Approx. 150mV
200MHz ~ 300MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal
Time base Range
1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1000 div maximum.
Time base
Accuracy
Real Time Sample
Rate
±20 ppm over any ≥ 1 ms time interval
Max.:2GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
Max:2Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection
2ns (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Y-Axis Input
Channel 1; Channel 3*
*four channel models only
Channel 2; Channel 4*
*four channel models only
Phase Shift
±3° at 100kHz
Cursors and Measurement
Cursors
Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
Automatic
Measurement
Control Panel
Function
Auto counter
Autoset
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width,
Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase
Cursors measurement
6 digits, range from 2Hz minimum to the rated bandwidth
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo
Autoset
Save Setup
20set
Save Waveform
24set
Display
TFT LCD Type
8" TFT LCD SVGA color display
Display Resolution800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent Time Sampling
Waveform Display Dots, vectors, variable persistence (16ms~10s), infinite persistence
Waveform Update
Rate
Specification
Digital
Oscilloscopes
GW Instek
GDS-2202A
(200Mhz, 2
CH,2Gsa/s)
GDS2202A
Channels
Bandwidth
Rise time
2ch+Ext
DC~200MHz
(-3dB)
1.75ns
20M/100MHz
Bandwidth Limit
Vertical Sensitivity
8 bit
Resolution
:1mV*~10V/div(*:when the vertical scale is set to 1mv/div,the bandwidth limit will be set to 20MHz
automatically)
Input Coupling
AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
±(3% X |Readout| + 0.1div + 1mV)when 2mV/div or greater is selected
DC Gain Accuracy
±(5% X |Readout| + 0.1div + 1mV)when 1mV/div is selected;
Polarity
Maximum Input
Voltage
Normal & Invert
300Vrms, CAT I (300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
1mV/div ~ 20mV/div : ±0.5V
Offset Position
50mV/div ~ 200mV/div : ±5V
Range
500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform
+, -, ×, ÷, FFT, FFTrms ,d/dt ,∫dt ,√ ,Integration*,
Signal Process
required”
Differentiation* *: App installation
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman-Harris.
Trigger
Source
CH1 ,CH2, CH3*, CH4*, Line, EXT, D0-D15**
*four channel models only ;** Logic analyzer option only
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-
Trigger Type
Delay(1~65535 events), Time-Delay(Duration,10nS~10S), Logic*, Bus* (*with DS2-08LA or DS216LA option)
Holdoff range
10ns~10s
Coupling
AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity
DC ~ 100MHz Approx. 1div or 1.0mV
100MHz ~ 200MHz Approx. 1.5div or 15mV
200MHz ~ 300MHz Approx. 2div or 20mV
External Trigger
Range
±15V
Sensitivity
DC ~ 100MHz Approx. 100mV
100MHz ~ 200MHz Approx. 150mV
200MHz ~ 300MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal
Time base Range
1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1000 div maximum.
Time base
Accuracy
Real Time Sample
Rate
±20 ppm over any ≥ 1 ms time interval
Max.:2GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
Max:2Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection
2ns (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Y-Axis Input
Channel 1; Channel 3*
*four channel models only
Channel 2; Channel 4*
*four channel models only
Phase Shift
±3° at 100kHz
Cursors and Measurement
Cursors
Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
Automatic
Measurement
Control Panel
Function
Auto counter
Autoset
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width,
Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase
Cursors measurement
6 digits, range from 2Hz minimum to the rated bandwidth
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo
Autoset
Save Setup
20set
Save Waveform
24set
Display
TFT LCD Type
Display
Resolution
8" TFT LCD SVGA color display
800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent Time Sampling
Waveform Display Dots, vectors, variable persistence (16ms~10s), infinite persistence
Waveform Update
Rate
Specification
Digital
Oscilloscopes
GW Instek
GDS-2104A
(100Mhz, 4
CH,2Gsa/s)
GDS2104A
Channels
4ch+Ext
DC~100MHz
Bandwidth
(-3dB)
Rise time
3.5ns
20MHz
Bandwidth Limit
Vertical Sensitivity
8 bit
Resolution
:1mV*~10V/div(*:when the vertical scale is set to 1mv/div,the bandwidth limit will be set to 20MHz
automatically)
Input Coupling
AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
±(3% X |Readout| + 0.1div + 1mV)when 2mV/div or greater is selected
DC Gain Accuracy
±(5% X |Readout| + 0.1div + 1mV)when 1mV/div is selected;
Polarity
Maximum Input
Voltage
Normal & Invert
300Vrms, CAT I (300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
1mV/div ~ 20mV/div : ±0.5V
Offset Position
50mV/div ~ 200mV/div : ±5V
Range
500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform
+, -, ×, ÷, FFT, FFTrms ,d/dt ,∫dt ,√ ,Integration*,
Signal Process
required”
Differentiation* *: App installation
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman-Harris.
Trigger
Source
CH1 ,CH2, CH3*, CH4*, Line, EXT, D0-D15**
*four channel models only ;** Logic analyzer option only
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-
Trigger Type
Delay(1~65535 events), Time-Delay(Duration,10nS~10S), Logic*, Bus* (*with DS2-08LA or DS216LA option)
Holdoff range
10ns~10s
Coupling
AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity
DC ~ 100MHz Approx. 1div or 1.0mV
100MHz ~ 200MHz Approx. 1.5div or 15mV
200MHz ~ 300MHz Approx. 2div or 20mV
External Trigger
Range
±15V
DC ~ 100MHz Approx. 100mV
Sensitivity
100MHz ~ 200MHz Approx. 150mV
200MHz ~ 300MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal
Time base Range
1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1000 div maximum.
Time base
Accuracy
Real Time Sample
Rate
±20 ppm over any ≥ 1 ms time interval
Max.:2GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
Max:2Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection
2ns (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Y-Axis Input
Channel 1; Channel 3*
*four channel models only
Channel 2; Channel 4*
*four channel models only
Phase Shift
±3° at 100kHz
Cursors and Measurement
Cursors
Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
Automatic
Measurement
Control Panel
Function
Auto counter
Autoset
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width,
Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase
Cursors measurement
6 digits, range from 2Hz minimum to the rated bandwidth
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo
Autoset
Save Setup
20set
Save Waveform
24set
Display
TFT LCD Type
Display
Resolution
Interpolation
8" TFT LCD SVGA color display
800 horizontal × 600 vertical pixels (SVGA)
Sin(x)/x & Equivalent Time Sampling
Waveform Display Dots, vectors, variable persistence (16ms~10s), infinite persistence
Waveform Update
Rate

Digital
Oscilloscopes
GW Instek
GDS-3152
(150Mhz, 2
CH,2.5Gsa/s)
GDS-3152
Vertical Sensitivity
Input Channels
2Ch+EXT
Bandwidth
DC~150MHz(-3dB)
Rise Time
2.3ns
Vertical Resolution
8 bits
Vertical Resolution @
1MΩ
Vertical Resolution @
50/75Ω
2mV~5V/div
2mV~1V/div
Input Coupling
AC, DC, GND
Input Impedance
1MΩ// 15pF
DC Gain Accuracy
±(3% X |Readout| + 0.1div + 1mV)
Polarity
Normal, Invert
Maximum Input
Voltage @1MΩ
Maximum Input
Voltage @50/75Ω
Offset Position
Range
300Vrms, CAT I(300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
5 VRMS max, CAT I
2mV/div ~ 100mV/div : ±0.5V ;200mV/div ~ 5V/div : ±25V
Bandwidth Limit
Waveform Signal
Process
GDS-3152/3154:20MHz
(-3dB)
Add, subtract, multiply, and divide waveforms, FFT, FFTrms
FFT: Spectral magnitude.
Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular,
Hamming, Hanning or Blackman-Harris.Integration*, Differentiation* *: App installation
required
Trigger
2 CH model: CH1, CH2, Line, EXT
Source
4 CH model: CH1, CH2, CH3, CH4, Line, EXT
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Runt, Rise & Fall(Slope), Alternate, EventDelay(1~65,535 events),
Trigger Type
Time-Delay(Duration ,10ns~10s),
I²C, SPI, UART(optional)
Runt: Trigger on a pulse that crosses one threshold but fails to cross a second threshold
before crossing the first again.
I²C (optional)
Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or
Address and Data on I²C buses
SPI (optional)
Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses
UART (optional)
Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data, Rx
Data, Tx Parity Error, and Rx Parity Error
Trigger Holdoff
Range
Coupling
10ns~10s
AC, DC, LF rej., Hf rej., Noise rej.
DC ~ 50MHz Approx. 1div or 10mV
Sensitivity
50MHz ~ 350MHz Approx. 1.5div or 15mV
EXT Trigger
Range
Sensitivity
Input Impedance
±15V
DC ~ 150MHz Approx. 100mV ;150MHz ~ 250MHz Approx. 150mV
250MHz ~ 350MHz Approx. 150mV ;350MHz ~ 500MHz Approx. 200mV
1MΩ±3%, ~16pF
Horizontal
Time base range
1ns/div ~ 100s/div (1-2-5 increments;GDS-3502/3504:1-2.5-5 increments); ROLL :
100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1,000 div
Time base accuracy ±20 ppm over any ≧1 ms time interval
X-Y Mode
X-Axis Input
Channel 1; Channel 3
Y-Axis Input
Channel 2; Channel 4
Phase Shift
±3° at 100kHz
Signal Acquisition
Real Time Sample
Rate
2.5GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
25k points/ channel
Acquisition Mode
Normal, Average, Peak detect, High resolution, Single
Normal: Acquire sampled values.
Average: From 2 ~256 waveforms included in average.
Peak Detect: Captures glitches as narrow as 2 ns at all sweep speeds
Hi Res: Real-time boxcar averaging reduces random noise and increases vertical
resolution.
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available
28 sets: Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot ,
Automatic
Fall Preshoot/Overshoot, Freq , Period , Rise Time , Fall Time , Positive Width , Negative
Measurement
Width , Duty Cycle, Phase angle, and eight different delay measurements (FRR, FRF,
FFR, FFF, LRR, LRF, LFR, LFF)
Cursors
measurement
Auto counter
Voltage difference between cursors ( ∆V) Time difference between cursors ( ∆T)
6 digits, range from 2Hz minimum to the rated bandwidth
Power
Measurements
(option)
Power Quality
VRMS, VCrest Factor, Frequency, IRMS, ICrest Factor, True
Measurements
Power, Apparent power, Reactive power, Power factor, Phase angle.
Harmonics
Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements V ripple ,I ripple
In-rush current
First peak, Second peak
Control Panel
Function
Autoset
Auto-Range
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems,
with undo autoset
Allow users to quickly move from test point to test point without having to reset the
oscilloscope for each test point
Save Setup
20 set
Save Waveform
24 set
Display System
TFT LCD Type
8" TFT LCD SVGA color display
Display mode
YT ;XY
Display Resolution
800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent time sampling
Waveform Display
Dots, vectors, variable persistence, infinite persistence
Display Graticule
8 x 10 divisions
Display Brightness
Adjustable
Waveform capture rate
3500 waveform /sec real time
Interface
RS-232C
DB-9 male connector
USB Port
2 sets USB 2.0 High-speed host port ; 1 set USB High-speed 2.0 device port
Ethernet (LAN)Port
RJ-45 connector, 10/100Mbps
SVGA Video Port
DB-15 female connector, monitor output for display on SVGA monitors
GPIB
GPIB to USB Adapter (GUG-001 Option)
Go/NoGo BNC
5V Max/10mA TTL Open collector output
Internal flash disk
64MB
Kensington Style
Rear-panel security slot connects to standard Kensington-style lock.
Lock
Line output
3.5mm stereo jack for Go/NoGo audio alarm
Power Source
Line Voltage range
AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
operation environment
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
Miscellaneous
Multi-language menu Available
On-line help
Available
Time clock
Time and Data, Provide the Data/Time for saved data
Dimensions & Weight 400(W) X 200(H) X 130(D)mm, approx 4 kg

Specification
Digital
Oscilloscopes
GW Instek
GDS-2204A
(200Mhz, 4
CH,2Gsa/s)
GDS2204A
Channels
4ch+Ext
DC~200MHz
Bandwidth
(-3dB)
Rise time
1.75ns
20M/100MHz
Bandwidth Limit
Vertical Sensitivity
8 bit
Resolution
:1mV*~10V/div(*:when the vertical scale is set to 1mv/div,the bandwidth limit will be set to 20MHz
automatically)
Input Coupling
AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
±(3% X |Readout| + 0.1div + 1mV)when 2mV/div or greater is selected
DC Gain Accuracy
±(5% X |Readout| + 0.1div + 1mV)when 1mV/div is selected;
Polarity
Maximum Input
Voltage
Normal & Invert
300Vrms, CAT I (300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
1mV/div ~ 20mV/div : ±0.5V
Offset Position
50mV/div ~ 200mV/div : ±5V
Range
500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform
+, -, ×, ÷, FFT, FFTrms ,d/dt ,∫dt ,√ ,Integration*,
Signal Process
required”
Differentiation* *: App installation
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman-Harris.
Trigger
Source
CH1 ,CH2, CH3*, CH4*, Line, EXT, D0-D15**
*four channel models only ;** Logic analyzer option only
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-
Trigger Type
Delay(1~65535 events), Time-Delay(Duration,10nS~10S), Logic*, Bus* (*with DS2-08LA or DS216LA option)
Holdoff range
10ns~10s
Coupling
AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity
DC ~ 100MHz Approx. 1div or 1.0mV
100MHz ~ 200MHz Approx. 1.5div or 15mV
200MHz ~ 300MHz Approx. 2div or 20mV
External Trigger
Range
±15V
DC ~ 100MHz Approx. 100mV
Sensitivity
100MHz ~ 200MHz Approx. 150mV
200MHz ~ 300MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal
Time base Range
1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1000 div maximum.
Time base
Accuracy
Real Time Sample
Rate
±20 ppm over any ≥ 1 ms time interval
Max.:2GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
Max:2Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection
2ns (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Y-Axis Input
Channel 1; Channel 3*
*four channel models only
Channel 2; Channel 4*
*four channel models only
Phase Shift
±3° at 100kHz
Cursors and Measurement
Cursors
Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
Automatic
Measurement
Control Panel
Function
Auto counter
Autoset
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width,
Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase
Cursors measurement
6 digits, range from 2Hz minimum to the rated bandwidth
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo
Autoset
Save Setup
20set
Save Waveform
24set
Display
TFT LCD Type
8" TFT LCD SVGA color display
Display Resolution800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent Time Sampling
Waveform Display Dots, vectors, variable persistence (16ms~10s), infinite persistence
Waveform Update
Rate
GDS-3154
Digital
Oscilloscopes
Vertical Sensitivity
GW Instek
GDS-3154
(150Mhz, 4
CH,5Gsa/s)
Input Channels
4Ch+EXT
Bandwidth
DC~150MHz(-3dB)
Rise Time
2.3ns
Vertical Resolution
8 bits
Vertical Resolution @
1MΩ
Vertical Resolution @
50/75Ω
2mV~5V/div
2mV~1V/div
Input Coupling
AC, DC, GND
Input Impedance
1MΩ// 15pF
DC Gain Accuracy
±(3% X |Readout| + 0.1div + 1mV)
Polarity
Normal, Invert
Maximum Input
300Vrms, CAT I(300Vrms CAT II with GTP-151R/251R/351R/501R 10:1
Voltage @1MΩ
probe )
Maximum Input
Voltage @50/75Ω
5 VRMS max, CAT I
Offset Position Range 2mV/div ~ 100mV/div : ±0.5V ;200mV/div ~ 5V/div : ±25V
Bandwidth Limit
Waveform Signal
Process
GDS-3152/3154:20MHz
(-3dB)
Add, subtract, multiply, and divide waveforms, FFT, FFTrms
FFT: Spectral magnitude.
Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning or Blackman-Harris.Integration*, Differentiation*
*: App installation required
Trigger
2 CH model: CH1, CH2, Line, EXT
Source
4 CH model: CH1, CH2, CH3, CH4, Line, EXT
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Runt, Rise & Fall(Slope), Alternate, EventDelay(1~65,535 events),
Trigger Type
Time-Delay(Duration ,10ns~10s),
I²C, SPI, UART(optional)
Runt: Trigger on a pulse that crosses one threshold but fails to cross a second
threshold before crossing the first again.
I²C (optional)
Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data,
or Address and Data on I²C buses
SPI (optional)
Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses
UART (optional)
Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx
Data, Rx Data, Tx Parity Error, and Rx Parity Error
Trigger Holdoff Range 10ns~10s
Coupling
AC, DC, LF rej., Hf rej., Noise rej.
DC ~ 50MHz Approx. 1div or 10mV
Sensitivity
50MHz ~ 350MHz Approx. 1.5div or 15mV
EXT Trigger
Range
Sensitivity
Input Impedance
±15V
DC ~ 150MHz Approx. 100mV ;150MHz ~ 250MHz Approx. 150mV
250MHz ~ 350MHz Approx. 150mV ;350MHz ~ 500MHz Approx. 200mV
1MΩ±3%, ~16pF
Horizontal
Time base range
1ns/div ~ 100s/div (1-2-5 increments;GDS-3502/3504:1-2.5-5 increments); ROLL
: 100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1,000 div
Time base accuracy
±20 ppm over any ≧1 ms time interval
X-Y Mode
X-Axis Input
Channel 1; Channel 3
Y-Axis Input
Channel 2; Channel 4
Phase Shift
±3° at 100kHz
Signal Acquisition
Real Time Sample
Rate
5GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
25k points/ channel
Acquisition Mode
Normal, Average, Peak detect, High resolution, Single
Normal: Acquire sampled values.
Average: From 2 ~256 waveforms included in average.
Peak Detect: Captures glitches as narrow as 2 ns at all sweep speeds
Hi Res: Real-time boxcar averaging reduces random noise and increases
vertical resolution.
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available
28 sets: Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/
Automatic
Overshoot , Fall Preshoot/Overshoot, Freq , Period , Rise Time , Fall Time ,
Measurement
Positive Width , Negative Width , Duty Cycle, Phase angle, and eight different
delay measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF)
Cursors measurement Voltage difference between cursors ( ∆V) Time difference between cursors ( ∆T)
Auto counter
6 digits, range from 2Hz minimum to the rated bandwidth
Power
Measurements
(option)
Power Quality
VRMS, VCrest Factor, Frequency, IRMS, ICrest Factor, True
Measurements
Power, Apparent power, Reactive power, Power factor, Phase angle.
Harmonics
Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements V ripple ,I ripple
In-rush current
First peak, Second peak
Control Panel
Function
Autoset
Auto-Range
Single-button, automatic setup of all channels for vertical, horizontal and trigger
systems, with undo autoset
Allow users to quickly move from test point to test point without having to reset
the oscilloscope for each test point
Save Setup
20 set
Save Waveform
24 set
Display System
TFT LCD Type
8" TFT LCD SVGA color display
Display mode
YT ;XY
Display Resolution
800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent time sampling
Waveform Display
Dots, vectors, variable persistence, infinite persistence
Display Graticule
8 x 10 divisions
Display Brightness
Adjustable
Waveform capture rate
3500 waveform /sec real time
Interface
RS-232C
DB-9 male connector
USB Port
2 sets USB 2.0 High-speed host port ; 1 set USB High-speed 2.0 device port
Ethernet (LAN)Port
RJ-45 connector, 10/100Mbps
SVGA Video Port
DB-15 female connector, monitor output for display on SVGA monitors
GPIB
GPIB to USB Adapter (GUG-001 Option)
Go/NoGo BNC
5V Max/10mA TTL Open collector output
Internal flash disk
64MB
Kensington Style Lock Rear-panel security slot connects to standard Kensington-style lock.
Line output
3.5mm stereo jack for Go/NoGo audio alarm
Power Source
Line Voltage range
AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
operation environment
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
Miscellaneous
Multi-language menu
Available
On-line help
Available
Time clock
Time and Data, Provide the Data/Time for saved data
Dimensions & Weight 400(W) X 200(H) X 130(D)mm, approx 4 kg
GDS-
Digital
Oscilloscopes
GW Instek
GDS-3252
(250Mhz, 2
CH,2.5Gsa/s)
3252
Vertical Sensitivity
Input Channels
2Ch+EXT
Bandwidth
DC~250MHz(-3dB)
Rise Time
1.4ns
Vertical Resolution
Vertical Resolution
@ 1MΩ
Vertical Resolution
@ 50/75Ω
8 bits
2mV~5V/div
2mV~1V/div
Input Coupling
AC, DC, GND
Input Impedance
1MΩ// 15pF
DC Gain Accuracy
±(3% X |Readout| + 0.1div + 1mV)
Polarity
Normal, Invert
Maximum Input
Voltage @1MΩ
Maximum Input
Voltage @50/75Ω
Offset Position
Range
300Vrms, CAT I(300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
5 VRMS max, CAT I
2mV/div ~ 100mV/div : ±0.5V ;200mV/div ~ 5V/div : ±25V
GDS-3252/3254:
Bandwidth Limit
20MHz/100MHz (3dB)
Waveform Signal
Process
Add, subtract, multiply, and divide waveforms, FFT, FFTrms
FFT: Spectral magnitude.
Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning or Blackman-Harris.Integration*, Differentiation* *:
App installation required
Trigger
2 CH model: CH1, CH2, Line, EXT
Source
4 CH model: CH1, CH2, CH3, CH4, Line, EXT
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Runt, Rise & Fall(Slope), Alternate, EventDelay(1~65,535 events),
Trigger Type
Time-Delay(Duration ,10ns~10s),
I²C, SPI, UART(optional)
Runt: Trigger on a pulse that crosses one threshold but fails to cross a second
threshold before crossing the first again.
I²C (optional)
Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or
Address and Data on I²C buses
SPI (optional)
Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses
UART (optional)
Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data,
Rx Data, Tx Parity Error, and Rx Parity Error
Trigger Holdoff
Range
Coupling
10ns~10s
AC, DC, LF rej., Hf rej., Noise rej.
DC ~ 50MHz Approx. 1div or 10mV
Sensitivity
50MHz ~ 350MHz Approx. 1.5div or 15mV
EXT Trigger
Range
Sensitivity
Input Impedance
±15V
DC ~ 150MHz Approx. 100mV ;150MHz ~ 250MHz Approx. 150mV
250MHz ~ 350MHz Approx. 150mV ;350MHz ~ 500MHz Approx. 200mV
1MΩ±3%, ~16pF
Horizontal
Time base range
1ns/div ~ 100s/div (1-2-5 increments;GDS-3502/3504:1-2.5-5 increments); ROLL :
100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1,000 div
Time base accuracy ±20 ppm over any ≧1 ms time interval
X-Y Mode
X-Axis Input
Channel 1; Channel 3
Y-Axis Input
Channel 2; Channel 4
Phase Shift
±3° at 100kHz
Signal Acquisition
Real Time Sample
2.5GSa/s
Rate
ET Sample Rate
100GSa/s maximum for all models
Record Length
25k points/ channel
Acquisition Mode
Normal, Average, Peak detect, High resolution, Single
Normal: Acquire sampled values.
Average: From 2 ~256 waveforms included in average.
Peak Detect: Captures glitches as narrow as 2 ns at all sweep speeds
Hi Res: Real-time boxcar averaging reduces random noise and increases vertical
resolution.
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available
28 sets: Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/
Automatic
Overshoot , Fall Preshoot/Overshoot, Freq , Period , Rise Time , Fall Time , Positive
Measurement
Width , Negative Width , Duty Cycle, Phase angle, and eight different delay
measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF)
Cursors
measurement
Auto counter
Voltage difference between cursors ( ∆V) Time difference between cursors ( ∆T)
6 digits, range from 2Hz minimum to the rated bandwidth
Power
Measurements
(option)
Power Quality
VRMS, VCrest Factor, Frequency, IRMS, ICrest Factor, True
Measurements
Power, Apparent power, Reactive power, Power factor, Phase angle.
Harmonics
Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple
Measurements
In-rush current
V ripple ,I ripple
First peak, Second peak
Control Panel
Function
Autoset
Auto-Range
Single-button, automatic setup of all channels for vertical, horizontal and trigger
systems, with undo autoset
Allow users to quickly move from test point to test point without having to reset the
oscilloscope for each test point
Save Setup
20 set
Save Waveform
24 set
Display System
TFT LCD Type
8" TFT LCD SVGA color display
Display mode
YT ;XY
Display Resolution
800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent time sampling
Waveform Display
Dots, vectors, variable persistence, infinite persistence
Display Graticule
8 x 10 divisions
Display Brightness
Adjustable
Waveform capture rate
3500 waveform /sec real time
Interface
RS-232C
DB-9 male connector
USB Port
2 sets USB 2.0 High-speed host port ; 1 set USB High-speed 2.0 device port
Ethernet (LAN)Port RJ-45 connector, 10/100Mbps
SVGA Video Port
DB-15 female connector, monitor output for display on SVGA monitors
GPIB
GPIB to USB Adapter (GUG-001 Option)
Go/NoGo BNC
5V Max/10mA TTL Open collector output
Internal flash disk
Kensington Style
64MB
Rear-panel security slot connects to standard Kensington-style lock.
Lock
Line output
3.5mm stereo jack for Go/NoGo audio alarm
Power Source
Line Voltage range AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
operation environment
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
Miscellaneous
Multi-language
Available
menu
On-line help
Available
Time clock
Time and Data, Provide the Data/Time for saved data
Dimensions &
400(W) X 200(H) X 130(D)mm, approx 4 kg
Weight
Specification
Digital
Oscilloscopes
GW Instek
GDS-2302A
(300Mhz, 2
CH,2Gsa/s)
GDS2302A
Channels
2ch+Ext
DC~300MHz
Bandwidth
(-3dB)
Rise time
1.17ns
20M/100M
Bandwidth Limit
/200MHz
Vertical Sensitivity
8 bit
Resolution
:1mV*~10V/div(*:when the vertical scale is set to 1mv/div,the bandwidth limit will be set to 20MHz
automatically)
Input Coupling
AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
±(3% X |Readout| + 0.1div + 1mV)when 2mV/div or greater is selected
DC Gain Accuracy
±(5% X |Readout| + 0.1div + 1mV)when 1mV/div is selected;
Polarity
Maximum Input
Voltage
Offset Position
Range
Normal & Invert
300Vrms, CAT I (300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
1mV/div ~ 20mV/div : ±0.5V
50mV/div ~ 200mV/div : ±5V
500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform
+, -, ×, ÷, FFT, FFTrms ,d/dt ,∫dt ,√ ,Integration*,
Signal Process
required”
Differentiation* *: App installation
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman-Harris.
Trigger
Source
CH1 ,CH2, CH3*, CH4*, Line, EXT, D0-D15**
*four channel models only ;** Logic analyzer option only
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-
Trigger Type
Delay(1~65535 events), Time-Delay(Duration,10nS~10S), Logic*, Bus* (*with DS2-08LA or DS216LA option)
Holdoff range
10ns~10s
Coupling
AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity
DC ~ 100MHz Approx. 1div or 1.0mV
100MHz ~ 200MHz Approx. 1.5div or 15mV
200MHz ~ 300MHz Approx. 2div or 20mV
External Trigger
Range
±15V
DC ~ 100MHz Approx. 100mV
Sensitivity
100MHz ~ 200MHz Approx. 150mV
200MHz ~ 300MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal
Time base Range
1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1000 div maximum.
Time base
Accuracy
Real Time Sample
Rate
±20 ppm over any ≥ 1 ms time interval
Max.:2GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
Max:2Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection
2ns (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Channel 1; Channel 3*
*four channel models only
Y-Axis Input
Channel 2; Channel 4*
*four channel models only
Phase Shift
±3° at 100kHz
Cursors and Measurement
Cursors
Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
Automatic
Measurement
Control Panel
Function
Auto counter
Autoset
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width,
Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase
Cursors measurement
6 digits, range from 2Hz minimum to the rated bandwidth
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo
Autoset
Save Setup
20set
Save Waveform
24set
Display
TFT LCD Type
Display
Resolution
Interpolation
8" TFT LCD SVGA color display
800 horizontal × 600 vertical pixels (SVGA)
Sin(x)/x & Equivalent Time Sampling
Waveform Display Dots, vectors, variable persistence (16ms~10s), infinite persistence
Waveform Update
Rate
GDS-
Digital
Oscilloscopes
GW Instek
GDS-3254
(250Mhz, 4
CH,5Gsa/s)
3254
Vertical Sensitivity
Input Channels
4Ch+EXT
Bandwidth
DC~250MHz(-3dB)
Rise Time
1.4ns
Vertical Resolution
Vertical Resolution
@ 1MΩ
Vertical Resolution
@ 50/75Ω
8 bits
2mV~5V/div
2mV~1V/div
Input Coupling
AC, DC, GND
Input Impedance
1MΩ// 15pF
DC Gain Accuracy
±(3% X |Readout| + 0.1div + 1mV)
Polarity
Normal, Invert
Maximum Input
Voltage @1MΩ
Maximum Input
Voltage @50/75Ω
Offset Position
Range
300Vrms, CAT I(300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
5 VRMS max, CAT I
2mV/div ~ 100mV/div : ±0.5V ;200mV/div ~ 5V/div : ±25V
GDS-3252/3254:
Bandwidth Limit
20MHz/100MHz (3dB)
Waveform Signal
Process
Add, subtract, multiply, and divide waveforms, FFT, FFTrms
FFT: Spectral magnitude.
Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning or Blackman-Harris.Integration*, Differentiation* *:
App installation required
Trigger
2 CH model: CH1, CH2, Line, EXT
Source
4 CH model: CH1, CH2, CH3, CH4, Line, EXT
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Runt, Rise & Fall(Slope), Alternate, EventDelay(1~65,535 events),
Trigger Type
Time-Delay(Duration ,10ns~10s),
I²C, SPI, UART(optional)
Runt: Trigger on a pulse that crosses one threshold but fails to cross a second
threshold before crossing the first again.
I²C (optional)
Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or
Address and Data on I²C buses
SPI (optional)
Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses
UART (optional)
Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data,
Rx Data, Tx Parity Error, and Rx Parity Error
Trigger Holdoff
Range
Coupling
10ns~10s
AC, DC, LF rej., Hf rej., Noise rej.
DC ~ 50MHz Approx. 1div or 10mV
Sensitivity
50MHz ~ 350MHz Approx. 1.5div or 15mV
EXT Trigger
Range
Sensitivity
Input Impedance
±15V
DC ~ 150MHz Approx. 100mV ;150MHz ~ 250MHz Approx. 150mV
250MHz ~ 350MHz Approx. 150mV ;350MHz ~ 500MHz Approx. 200mV
1MΩ±3%, ~16pF
Horizontal
Time base range
1ns/div ~ 100s/div (1-2-5 increments;GDS-3502/3504:1-2.5-5 increments); ROLL :
100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1,000 div
Time base accuracy ±20 ppm over any ≧1 ms time interval
X-Y Mode
X-Axis Input
Channel 1; Channel 3
Y-Axis Input
Channel 2; Channel 4
Phase Shift
±3° at 100kHz
Signal Acquisition
Real Time Sample
5GSa/s
Rate
ET Sample Rate
100GSa/s maximum for all models
Record Length
25k points/ channel
Acquisition Mode
Normal, Average, Peak detect, High resolution, Single
Normal: Acquire sampled values.
Average: From 2 ~256 waveforms included in average.
Peak Detect: Captures glitches as narrow as 2 ns at all sweep speeds
Hi Res: Real-time boxcar averaging reduces random noise and increases vertical
resolution.
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available
28 sets: Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/
Automatic
Overshoot , Fall Preshoot/Overshoot, Freq , Period , Rise Time , Fall Time , Positive
Measurement
Width , Negative Width , Duty Cycle, Phase angle, and eight different delay
measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF)
Cursors
measurement
Auto counter
Voltage difference between cursors ( ∆V) Time difference between cursors ( ∆T)
6 digits, range from 2Hz minimum to the rated bandwidth
Power
Measurements
(option)
Power Quality
VRMS, VCrest Factor, Frequency, IRMS, ICrest Factor, True
Measurements
Power, Apparent power, Reactive power, Power factor, Phase angle.
Harmonics
Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple
Measurements
In-rush current
Control Panel
Function
V ripple ,I ripple
First peak, Second peak
Autoset
Auto-Range
Single-button, automatic setup of all channels for vertical, horizontal and trigger
systems, with undo autoset
Allow users to quickly move from test point to test point without having to reset the
oscilloscope for each test point
Save Setup
20 set
Save Waveform
24 set
Display System
TFT LCD Type
8" TFT LCD SVGA color display
Display mode
YT ;XY
Display Resolution
800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent time sampling
Waveform Display
Dots, vectors, variable persistence, infinite persistence
Display Graticule
8 x 10 divisions
Display Brightness
Adjustable
Waveform capture rate
3500 waveform /sec real time
Interface
RS-232C
DB-9 male connector
USB Port
2 sets USB 2.0 High-speed host port ; 1 set USB High-speed 2.0 device port
Ethernet (LAN)Port RJ-45 connector, 10/100Mbps
SVGA Video Port
DB-15 female connector, monitor output for display on SVGA monitors
GPIB
GPIB to USB Adapter (GUG-001 Option)
Go/NoGo BNC
5V Max/10mA TTL Open collector output
Internal flash disk
64MB
Kensington Style
Lock
Line output
Rear-panel security slot connects to standard Kensington-style lock.
3.5mm stereo jack for Go/NoGo audio alarm
Power Source
Line Voltage range
AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
operation environment
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
Miscellaneous
Multi-language
menu
Available
On-line help
Available
Time clock
Time and Data, Provide the Data/Time for saved data
Dimensions &
400(W) X 200(H) X 130(D)mm, approx 4 kg
Weight
Specification
Digital
Oscilloscopes
GW Instek
GDS-2304A
(300Mhz, 4
CH,2Gsa/s)
GDS-2304A
Channels
Bandwidth
Rise time
4ch+Ext
DC~300MHz
(-3dB)
1.17ns
20M/100M
Bandwidth Limit
/200MHz
Vertical Sensitivity
8 bit
Resolution
:1mV*~10V/div(*:when the vertical scale is set to 1mv/div,the bandwidth limit will
be set to 20MHz automatically)
Input Coupling
Input
Impedance
DC Gain
AC, DC, GND
1MΩ// 16pF approx.
±(3% X |Readout| + 0.1div + 1mV)when 2mV/div or greater is
selected
Accuracy
±(5% X |Readout| + 0.1div + 1mV)when 1mV/div is selected;
Polarity
Maximum Input
Voltage
Normal & Invert
300Vrms, CAT I (300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
1mV/div ~ 20mV/div : ±0.5V
Offset Position
Range
50mV/div ~ 200mV/div : ±5V
500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform
+, -, ×, ÷, FFT, FFTrms ,d/dt ,∫dt ,√ ,Integration*,
Signal Process
App installation required”
Differentiation* *:
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT
Window to Rectangular, Hamming, Hanning, or Blackman-Harris.
Trigger
Source
Trigger Mode
CH1 ,CH2, CH3*, CH4*, Line, EXT, D0-D15**
*four channel models only ;** Logic analyzer option only
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme
Trigger Type
out, Event-Delay(1~65535 events), Time-Delay(Duration,10nS~10S), Logic*, Bus*
(*with DS2-08LA or DS2-16LA option)
Holdoff range
10ns~10s
Coupling
AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity
DC ~ 100MHz Approx. 1div or 1.0mV
100MHz ~ 200MHz Approx. 1.5div or 15mV
200MHz ~ 300MHz Approx. 2div or 20mV
External Trigger
Range
±15V
DC ~ 100MHz Approx. 100mV
Sensitivity
100MHz ~ 200MHz Approx. 150mV
200MHz ~ 300MHz Approx. 150mV
Input
Impedance
1MΩ±3%~16pF
Horizontal
Time base
1ns/div ~ 100s/div (1-2-5 increments)
Range
ROLL: 100ms/div ~ 100s/div
Pre-trigger
10 div maximum
Post-trigger
1000 div maximum.
Time base
Accuracy
Real Time
Sample Rate
±20 ppm over any ≥ 1 ms time interval
Max.:2GSa/s
ET Sample Rate 100GSa/s maximum for all models
Record Length
Max:2Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection
2ns (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Y-Axis Input
Channel 1; Channel 3*
*four channel models only
Channel 2; Channel 4*
*four channel models only
Phase Shift
±3° at 100kHz
Cursors and Measurement
Cursors
Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle
Automatic
RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency,
Measurement
Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase
Control Panel
Function
Auto counter
Autoset
Save Setup
Cursors measurement
6 digits, range from 2Hz minimum to the rated bandwidth
Single-button, automatic setup of all channels for vertical, horizontal and trigger
systems, with undo Autoset
20set
Save Waveform 24set
Display
TFT LCD Type
8" TFT LCD SVGA color display
Display
Resolution
Interpolation
Waveform
Display
800 horizontal × 600 vertical pixels (SVGA)
Sin(x)/x & Equivalent Time Sampling
Dots, vectors, variable persistence (16ms~10s), infinite persistence
Waveform
Update Rate
GDS-3352
Digital
Oscilloscopes
GW Instek
GDS-3352
(350Mhz, 2
CH,5Gsa/s)
Vertical Sensitivity
Input Channels
2Ch+EXT
Bandwidth
DC~350MHz(-3dB)
Rise Time
1ns
Vertical Resolution
Vertical Resolution @
1MΩ
Vertical Resolution @
50/75Ω
8 bits
2mV~5V/div
2mV~1V/div
Input Coupling
AC, DC, GND
Input Impedance
1MΩ// 15pF
DC Gain Accuracy
±(3% X |Readout| + 0.1div + 1mV)
Polarity
Normal, Invert
Maximum Input Voltage
@1MΩ
Maximum Input Voltage
@50/75Ω
Offset Position Range
300Vrms, CAT I(300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
5 VRMS max, CAT I
2mV/div ~ 100mV/div : ±0.5V ;200mV/div ~ 5V/div : ±25V
GDS-3352/3354:
Bandwidth Limit
20MHz/100MHz/
200MHz (-3dB)
Waveform Signal
Process
Add, subtract, multiply, and divide waveforms, FFT, FFTrms
FFT: Spectral magnitude.
Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, H
Hanning or Blackman-Harris.Integration*, Differentiation* *: App installation required
Trigger
2 CH model: CH1, CH2, Line, EXT
Source
4 CH model: CH1, CH2, CH3, CH4, Line, EXT
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Runt, Rise & Fall(Slope), Alternate, Event-Delay(1~65
Trigger Type
Time-Delay(Duration ,10ns~10s),
I²C, SPI, UART(optional)
Runt: Trigger on a pulse that crosses one threshold but fails to cross a second threshold
crossing the first again.
I²C (optional)
Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Add
on I²C buses
SPI (optional)
Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses
UART (optional)
Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data, Rx Da
Error, and Rx Parity Error
Trigger Holdoff Range
10ns~10s
Coupling
AC, DC, LF rej., Hf rej., Noise rej.
DC ~ 50MHz Approx. 1div or 10mV
Sensitivity
50MHz ~ 350MHz Approx. 1.5div or 15mV
EXT Trigger
Range
Sensitivity
Input Impedance
±15V
DC ~ 150MHz Approx. 100mV ;150MHz ~ 250MHz Approx. 150mV
250MHz ~ 350MHz Approx. 150mV ;350MHz ~ 500MHz Approx. 200mV
1MΩ±3%, ~16pF
Horizontal
Time base range
1ns/div ~ 100s/div (1-2-5 increments;GDS-3502/3504:1-2.5-5 increments); ROLL : 100m
100s/div
Pre-trigger
10 div maximum
Post-trigger
1,000 div
Time base accuracy
±20 ppm over any ≧1 ms time interval
X-Y Mode
X-Axis Input
Channel 1; Channel 3
Y-Axis Input
Channel 2; Channel 4
Phase Shift
±3° at 100kHz
Signal Acquisition
Real Time Sample Rate
5GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
25k points/ channel
Acquisition Mode
Normal, Average, Peak detect, High resolution, Single
Normal: Acquire sampled values.
Average: From 2 ~256 waveforms included in average.
Peak Detect: Captures glitches as narrow as 2 ns at all sweep speeds
Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolu
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available
28 sets: Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot
Automatic Measurement
Preshoot/Overshoot, Freq , Period , Rise Time , Fall Time , Positive Width , Negative W
Cycle, Phase angle, and eight different delay measurements (FRR, FRF, FFR, FFF, LRR
LFF)
Cursors measurement
Voltage difference between cursors ( ∆V) Time difference between cursors ( ∆T)
Auto counter
6 digits, range from 2Hz minimum to the rated bandwidth
Power Measurements
(option)
Power Quality
VRMS, VCrest Factor, Frequency, IRMS, ICrest Factor, True
Measurements
Power, Apparent power, Reactive power, Power factor, Phase angle.
Harmonics
Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements
V ripple ,I ripple
In-rush current
First peak, Second peak
Control Panel Function
Autoset
Auto-Range
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems
autoset
Allow users to quickly move from test point to test point without having to reset the oscill
test point
Save Setup
20 set
Save Waveform
24 set
Display System
TFT LCD Type
8" TFT LCD SVGA color display
Display mode
YT ;XY
Display Resolution
800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent time sampling
Waveform Display
Dots, vectors, variable persistence, infinite persistence
Display Graticule
8 x 10 divisions
Display Brightness
Adjustable
Waveform capture rate
3500 waveform /sec real time
Interface
RS-232C
DB-9 male connector
USB Port
2 sets USB 2.0 High-speed host port ; 1 set USB High-speed 2.0 device port
Ethernet (LAN)Port
RJ-45 connector, 10/100Mbps
SVGA Video Port
DB-15 female connector, monitor output for display on SVGA monitors
GPIB
GPIB to USB Adapter (GUG-001 Option)
Go/NoGo BNC
5V Max/10mA TTL Open collector output
Internal flash disk
64MB
Kensington Style Lock
Rear-panel security slot connects to standard Kensington-style lock.
Line output
3.5mm stereo jack for Go/NoGo audio alarm
Power Source
Line Voltage range
AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
operation environment
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
Miscellaneous
Multi-language menu
Available
On-line help
Available
Time clock
Time and Data, Provide the Data/Time for saved data
Dimensions & Weight
400(W) X 200(H) X 130(D)mm, approx 4 kg
GDS-3354
Digital
Oscilloscopes
GW Instek
GDS-3354
(350Mhz, 4
CH,5Gsa/s)
Vertical Sensitivity
Input Channels
4Ch+EXT
Bandwidth
DC~350MHz(-3dB)
Rise Time
.
Vertical Resolution
8 bits
Vertical Resolution @
1MΩ
Vertical Resolution @
50/75Ω
2mV~5V/div
2mV~1V/div
Input Coupling
AC, DC, GND
Input Impedance
1MΩ// 15pF
DC Gain Accuracy
±(3% X |Readout| + 0.1div + 1mV)
Polarity
Normal, Invert
Maximum Input Voltage
@1MΩ
Maximum Input Voltage
@50/75Ω
Offset Position Range
1ns
300Vrms, CAT I(300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
5 VRMS max, CAT I
2mV/div ~ 100mV/div : ±0.5V ;200mV/div ~ 5V/div : ±25V
GDS-3352/3354:
Bandwidth Limit
20MHz/100MHz/
200MHz (-3dB)
Waveform Signal
Process
Add, subtract, multiply, and divide waveforms, FFT, FFTrms
FFT: Spectral magnitude.
Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, H
Hanning or Blackman-Harris.Integration*, Differentiation* *: App installation required
Trigger
2 CH model: CH1, CH2, Line, EXT
Source
4 CH model: CH1, CH2, CH3, CH4, Line, EXT
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Runt, Rise & Fall(Slope), Alternate, Event-Delay(1~65
Trigger Type
Time-Delay(Duration ,10ns~10s),
I²C, SPI, UART(optional)
Runt: Trigger on a pulse that crosses one threshold but fails to cross a second threshold
crossing the first again.
I²C (optional)
Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Add
on I²C buses
SPI (optional)
Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses
UART (optional)
Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data, Rx Da
Error, and Rx Parity Error
Trigger Holdoff Range
10ns~10s
Coupling
AC, DC, LF rej., Hf rej., Noise rej.
DC ~ 50MHz Approx. 1div or 10mV
Sensitivity
50MHz ~ 350MHz Approx. 1.5div or 15mV
EXT Trigger
Range
Sensitivity
Input Impedance
±15V
DC ~ 150MHz Approx. 100mV ;150MHz ~ 250MHz Approx. 150mV
250MHz ~ 350MHz Approx. 150mV ;350MHz ~ 500MHz Approx. 200mV
1MΩ±3%, ~16pF
Horizontal
Time base range
1ns/div ~ 100s/div (1-2-5 increments;GDS-3502/3504:1-2.5-5 increments); ROLL : 100m
100s/div
Pre-trigger
10 div maximum
Post-trigger
1,000 div
Time base accuracy
±20 ppm over any ≧1 ms time interval
X-Y Mode
X-Axis Input
Channel 1; Channel 3
Y-Axis Input
Channel 2; Channel 4
Phase Shift
±3° at 100kHz
Signal Acquisition
Real Time Sample Rate
5GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
25k points/ channel
Acquisition Mode
Normal, Average, Peak detect, High resolution, Single
Normal: Acquire sampled values.
Average: From 2 ~256 waveforms included in average.
Peak Detect: Captures glitches as narrow as 2 ns at all sweep speeds
Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolu
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available
28 sets: Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot
Automatic Measurement
Preshoot/Overshoot, Freq , Period , Rise Time , Fall Time , Positive Width , Negative W
Cycle, Phase angle, and eight different delay measurements (FRR, FRF, FFR, FFF, LRR
LFF)
Cursors measurement
Voltage difference between cursors ( ∆V) Time difference between cursors ( ∆T)
Auto counter
6 digits, range from 2Hz minimum to the rated bandwidth
Power Measurements
(option)
Power Quality
VRMS, VCrest Factor, Frequency, IRMS, ICrest Factor, True
Measurements
Power, Apparent power, Reactive power, Power factor, Phase angle.
Harmonics
Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements
V ripple ,I ripple
In-rush current
First peak, Second peak
Control Panel Function
Autoset
Auto-Range
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems
autoset
Allow users to quickly move from test point to test point without having to reset the oscill
test point
Save Setup
20 set
Save Waveform
24 set
Display System
TFT LCD Type
8" TFT LCD SVGA color display
Display mode
YT ;XY
Display Resolution
800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent time sampling
Waveform Display
Dots, vectors, variable persistence, infinite persistence
Display Graticule
8 x 10 divisions
Display Brightness
Adjustable
Waveform capture rate
3500 waveform /sec real time
Interface
RS-232C
DB-9 male connector
USB Port
2 sets USB 2.0 High-speed host port ; 1 set USB High-speed 2.0 device port
Ethernet (LAN)Port
RJ-45 connector, 10/100Mbps
SVGA Video Port
DB-15 female connector, monitor output for display on SVGA monitors
GPIB
GPIB to USB Adapter (GUG-001 Option)
Go/NoGo BNC
5V Max/10mA TTL Open collector output
Internal flash disk
64MB
Kensington Style Lock
Rear-panel security slot connects to standard Kensington-style lock.
Line output
3.5mm stereo jack for Go/NoGo audio alarm
Power Source
Line Voltage range
AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
operation environment
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
Miscellaneous
Multi-language menu
Available
On-line help
Available
Time clock
Time and Data, Provide the Data/Time for saved data
Dimensions & Weight
400(W) X 200(H) X 130(D)mm, approx 4 kg
GDS-35
Digital
Oscilloscopes
GW Instek
GDS-3502
(500Mhz, 2
CH,4Gsa/s)
Vertical Sensitivity
Input Channels
2Ch+EXT
Bandwidth
DC~500M
Rise Time
700ps
Vertical Resolution
Vertical Resolution @
1MΩ
Vertical Resolution @
50/75Ω
8 bits
2mV~5V/div
2mV~1V/div
Input Coupling
AC, DC, GND
Input Impedance
1MΩ// 15pF
DC Gain Accuracy
±(3% X |Readout| + 0.1div + 1mV)
Polarity
Normal, Invert
Maximum Input Voltage
@1MΩ
Maximum Input Voltage
@50/75Ω
Offset Position Range
300Vrms, CAT I(300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
5 VRMS max, CAT I
2mV/div ~ 100mV/div : ±0.5V ;200mV/div ~ 5V/div : ±25V
GDS-350
Bandwidth Limit
100MHz/
350MHz (
Waveform Signal
Process
Add, subtract, multiply, and divide waveforms, FFT, FFTrms
FFT: Spectral magnitude.
Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, H
Hanning or Blackman-Harris.Integration*, Differentiation* *: App installation required
Trigger
2 CH model: CH1, CH2, Line, EXT
Source
4 CH model: CH1, CH2, CH3, CH4, Line, EXT
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Runt, Rise & Fall(Slope), Alternate, Event-Delay(1~65
Trigger Type
Time-Delay(Duration ,10ns~10s),
I²C, SPI, UART(optional)
Runt: Trigger on a pulse that crosses one threshold but fails to cross a second threshold
crossing the first again.
I²C (optional)
Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Add
on I²C buses
SPI (optional)
Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses
UART (optional)
Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data, Rx Da
Error, and Rx Parity Error
Trigger Holdoff Range
10ns~10s
Coupling
AC, DC, LF rej., Hf rej., Noise rej.
DC ~ 50MHz Approx. 1div or 10mV
Sensitivity
50MHz ~ 350MHz Approx. 1.5div or 15mV
EXT Trigger
Range
Sensitivity
Input Impedance
±15V
DC ~ 150MHz Approx. 100mV ;150MHz ~ 250MHz Approx. 150mV
250MHz ~ 350MHz Approx. 150mV ;350MHz ~ 500MHz Approx. 200mV
1MΩ±3%, ~16pF
Horizontal
Time base range
1ns/div ~ 100s/div (1-2-5 increments;GDS-3502/3504:1-2.5-5 increments); ROLL : 100m
100s/div
Pre-trigger
10 div maximum
Post-trigger
1,000 div
Time base accuracy
±20 ppm over any ≧1 ms time interval
X-Y Mode
X-Axis Input
Channel 1; Channel 3
Y-Axis Input
Channel 2; Channel 4
Phase Shift
±3° at 100kHz
Signal Acquisition
Real Time Sample Rate
4GSa/s
ET Sample Rate
100GSa/s maximum for all models
Record Length
25k points/ channel
Acquisition Mode
Normal, Average, Peak detect, High resolution, Single
Normal: Acquire sampled values.
Average: From 2 ~256 waveforms included in average.
Peak Detect: Captures glitches as narrow as 2 ns at all sweep speeds
Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolu
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available
28 sets: Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot
Automatic Measurement
Preshoot/Overshoot, Freq , Period , Rise Time , Fall Time , Positive Width , Negative W
Cycle, Phase angle, and eight different delay measurements (FRR, FRF, FFR, FFF, LRR
LFF)
Cursors measurement
Voltage difference between cursors ( ∆V) Time difference between cursors ( ∆T)
Auto counter
6 digits, range from 2Hz minimum to the rated bandwidth
Power Measurements
(option)
Power Quality
VRMS, VCrest Factor, Frequency, IRMS, ICrest Factor, True
Measurements
Power, Apparent power, Reactive power, Power factor, Phase angle.
Harmonics
Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements
V ripple ,I ripple
In-rush current
First peak, Second peak
Control Panel Function
Autoset
Auto-Range
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems
autoset
Allow users to quickly move from test point to test point without having to reset the oscill
test point
Save Setup
20 set
Save Waveform
24 set
Display System
TFT LCD Type
8" TFT LCD SVGA color display
Display mode
YT ;XY
Display Resolution
800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent time sampling
Waveform Display
Dots, vectors, variable persistence, infinite persistence
Display Graticule
8 x 10 divisions
Display Brightness
Adjustable
Waveform capture rate
3500 waveform /sec real time
Interface
RS-232C
DB-9 male connector
USB Port
2 sets USB 2.0 High-speed host port ; 1 set USB High-speed 2.0 device port
Ethernet (LAN)Port
RJ-45 connector, 10/100Mbps
SVGA Video Port
DB-15 female connector, monitor output for display on SVGA monitors
GPIB
GPIB to USB Adapter (GUG-001 Option)
Go/NoGo BNC
5V Max/10mA TTL Open collector output
Internal flash disk
64MB
Kensington Style Lock
Rear-panel security slot connects to standard Kensington-style lock.
Line output
3.5mm stereo jack for Go/NoGo audio alarm
Power Source
Line Voltage range
AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
operation environment
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
Miscellaneous
Multi-language menu
Available
On-line help
Available
Time clock
Time and Data, Provide the Data/Time for saved data
Dimensions & Weight
Digital
Oscilloscopes
GW Instek
GDS-3504
(500Mhz, 4
CH,4Gsa/s)
400(W) X 200(H) X 130(D)mm, approx 4 kg
Vertical Sensitivity
Input Channels
Bandwidth
DC~500M
Rise Time
700ps
Vertical Resolution
Vertical Resolution @
1MΩ
Vertical Resolution @
50/75Ω
8 bits
2mV~5V/div
2mV~1V/div
Input Coupling
AC, DC, GND
Input Impedance
1MΩ// 15pF
DC Gain Accuracy
±(3% X |Readout| + 0.1div + 1mV)
Polarity
Normal, Invert
Maximum Input Voltage
@1MΩ
Maximum Input Voltage
@50/75Ω
Offset Position Range
300Vrms, CAT I(300Vrms CAT II with GTP-151R/251R/351R/501R 10:1 probe )
5 VRMS max, CAT I
2mV/div ~ 100mV/div : ±0.5V ;200mV/div ~ 5V/div : ±25V
GDS-350
Bandwidth Limit
100MHz/
350MHz (
Waveform Signal
Process
Add, subtract, multiply, and divide waveforms, FFT, FFTrms
FFT: Spectral magnitude.
Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, H
Hanning or Blackman-Harris.Integration*, Differentiation* *: App installation required
Trigger
2 CH model: CH1, CH2, Line, EXT
Source
4 CH model: CH1, CH2, CH3, CH4, Line, EXT
Trigger Mode
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Runt, Rise & Fall(Slope), Alternate, Event-Delay(1~65
Trigger Type
Time-Delay(Duration ,10ns~10s),
I²C, SPI, UART(optional)
Runt: Trigger on a pulse that crosses one threshold but fails to cross a second threshold
crossing the first again.
I²C (optional)
Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Add
on I²C buses
SPI (optional)
Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses
UART (optional)
Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data, Rx Da
Error, and Rx Parity Error
Trigger Holdoff Range
10ns~10s
Coupling
AC, DC, LF rej., Hf rej., Noise rej.
DC ~ 50MHz Approx. 1div or 10mV
Sensitivity
50MHz ~ 350MHz Approx. 1.5div or 15mV
EXT Trigger
Range
Sensitivity
Input Impedance
±15V
DC ~ 150MHz Approx. 100mV ;150MHz ~ 250MHz Approx. 150mV
250MHz ~ 350MHz Approx. 150mV ;350MHz ~ 500MHz Approx. 200mV
1MΩ±3%, ~16pF
Horizontal
Time base range
1ns/div ~ 100s/div (1-2-5 increments;GDS-3502/3504:1-2.5-5 increments); ROLL : 100m
100s/div
Pre-trigger
10 div maximum
Post-trigger
1,000 div
Time base accuracy
±20 ppm over any ≧1 ms time interval
X-Y Mode
X-Axis Input
Channel 1; Channel 3
Y-Axis Input
Channel 2; Channel 4
Phase Shift
±3° at 100kHz
Signal Acquisition
Real Time Sample Rate
ET Sample Rate
100GSa/s maximum for all models
Record Length
25k points/ channel
Acquisition Mode
Normal, Average, Peak detect, High resolution, Single
Normal: Acquire sampled values.
Average: From 2 ~256 waveforms included in average.
Peak Detect: Captures glitches as narrow as 2 ns at all sweep speeds
Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolu
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available
28 sets: Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot
Automatic Measurement
Preshoot/Overshoot, Freq , Period , Rise Time , Fall Time , Positive Width , Negative W
Cycle, Phase angle, and eight different delay measurements (FRR, FRF, FFR, FFF, LRR
LFF)
Cursors measurement
Voltage difference between cursors ( ∆V) Time difference between cursors ( ∆T)
Auto counter
6 digits, range from 2Hz minimum to the rated bandwidth
Power Measurements
(option)
Power Quality
VRMS, VCrest Factor, Frequency, IRMS, ICrest Factor, True
Measurements
Power, Apparent power, Reactive power, Power factor, Phase angle.
Harmonics
Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements
V ripple ,I ripple
In-rush current
First peak, Second peak
Control Panel Function
Autoset
Auto-Range
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems
autoset
Allow users to quickly move from test point to test point without having to reset the oscill
test point
Save Setup
20 set
Save Waveform
24 set
Display System
TFT LCD Type
8" TFT LCD SVGA color display
Display mode
YT ;XY
Display Resolution
800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent time sampling
Waveform Display
Dots, vectors, variable persistence, infinite persistence
Display Graticule
8 x 10 divisions
Display Brightness
Adjustable
Waveform capture rate
3500 waveform /sec real time
Interface
RS-232C
DB-9 male connector
USB Port
2 sets USB 2.0 High-speed host port ; 1 set USB High-speed 2.0 device port
Ethernet (LAN)Port
RJ-45 connector, 10/100Mbps
SVGA Video Port
DB-15 female connector, monitor output for display on SVGA monitors
GPIB
GPIB to USB Adapter (GUG-001 Option)
Go/NoGo BNC
5V Max/10mA TTL Open collector output
Internal flash disk
64MB
Kensington Style Lock
Rear-panel security slot connects to standard Kensington-style lock.
Line output
3.5mm stereo jack for Go/NoGo audio alarm
Power Source
Line Voltage range
AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
operation environment
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
Miscellaneous
Multi-language menu
Available
On-line help
Available
Time clock
Time and Data, Provide the Data/Time for saved data
Dimensions & Weight
400(W) X 200(H) X 130(D)mm, approx 4 kg
Reamrk:
- The above-mentioned price Excluded VAT invoice.
- The picture is not completely the same as real product
Delivery:
- Inside Hanoi downtown after 2 to 6 hours in working time for product available in stock, except for products need to be made
- Products for provincial delivery depend on the delivery time from nearest wearhouse to delivery place.
Payment mode:
* In cash or bank remittance after receiving goods
Further information
EMIN Vietnam Joint Stock Company
Certificate of Business Registration: 0105309275
Headquarter in Ha Noi City:
Add : No 8A, Hoang Cau Moi Street, Dong Da Distric, Ha Noi, Vietnam
Tel : (04) 35.381.269 - (04) 35.381.270 - ( 04) 35.381.271 - (04) 35.381.272
Fax : (04) 35 190 360;
Email: [email protected]
Branch in Ho Chi Minh City:
Add: No 218, Cong Hoa Street, Ward 12, Tan Binh District, Ho Chi Minh City, Viet Nam
Tel: (08) 3811 96 36 - (08) 3811 93 59 - (08) 3811 62 13
Fax : (08) 3811 95 45 ;
Email: [email protected]