Download IOT18 Toll gate traffic monitor and analyzer using IoT Technical

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Buck converter wikipedia , lookup

Immunity-aware programming wikipedia , lookup

Mains electricity wikipedia , lookup

Rectifier wikipedia , lookup

Switched-mode power supply wikipedia , lookup

Transcript
IOT18
Toll gate traffic monitor and analyzer using IoT
Technical Specifications:
Title of the project
:
Toll gate traffic monitor and analyzer using IoT
Domain
:
Embedded Systems Design
Software
:
Embedded C, Keil, Proload
Microcontroller
:
AT89S52
Power Supply
:
+5V, 500mA Regulated Power Supply
Crystal
:
11.0592MHz
Communication device
:
ESP8266
Developed By
:
M/S Wine Yard Technologies
Phone
:
040-64646363
www.wineyard.in
IOT18
ABSTRACT:
A toll road, also known as a turnpike or toll way, is a public or
private roadway for which a fee (or toll) is assessed for passage. It is a form of road
pricing typically
implemented
to
help
recoup
the
cost
of road
construction and maintenance, which (on public roads) amounts to a form of taxation.
We are implementing a project using AT89S52 for toll gate maintenance.
Here we have categorized vehicle as four types. They are
Type 1- three wheelers
Type 2- four wheelers
Type 3- Heavy vehicles
Type 4- Govt vehicles
At each and every toll gate a person will be present for billing. He need to press
the switch by identifying the type of vehicle. If the switch is pressed, gate will be opened
and after some delay the gate closes. Delay is to make the vehicle to enter and also to pay
the tax. Here we are using IoT module to update the information about the traffic and also
the type of vehicles travelled in that particular highway in the web server. This is greater
advantage for the officials to analyze the number of vehicles and also to maintain the
roads with much care in case of heavy traffic. Revenue can be calculated easily.
This project uses regulated 5V, 500mA power supply. 7805 three terminal voltage
regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify
the ac out put of secondary of 230/12V step down transformer.
www.wineyard.in
IOT18
Block Diagram:
Switch array
Type A
16X2 LCD
Type B
Contrast
Type C
Type D
AT89S52
WiFi - IoT
Module
ESP8266
MCU
Crystal
Oscillator
H-bridge
(Driver
circuit)
Reset
circuit
Step
down
T/F
Bridge
Rectifier
Filter
Circuit
Barrier gate
motor
Regulator
Power supply to all sections
www.wineyard.in