Download Folie 1 - Zavarivanje

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Algorithm characterizations wikipedia , lookup

Transcript
IK-92 PUMA
IK-92 Puma is a unique handy-type machine enabling both
highly accurate automatic straight-line cutting and semiautomatic (manually guided / circular) cutting with one
hand.
The IK-92 Puma is the most economical machine for cutting
automatically straight lines.
For the great accuracy the machine is using a rail for
guiding.
The rail (1800mm) can be extended to any desired length!!
For saving weight the rail is made will holes.
Features IK-92PUMA
Low center of gravity,
Therefore, stability is extremely high and automatic traveling can
be done exactly with no need for manual holding.
Accurate and reliable drive system,
IC for speed control is equipped, thus constant and accurate
machine travel is performed.
One-hand operation system making operations
easier,
One hand, which holds the grip, can operate the power switch,
clutch lever, speed adjustment dial and forward/reverse travel
selector switch.
Features IK-92PUMA
Bevel cutting
Beveling is possible up to 45°.
Perfect heat prevention system,
Long and continuous operation is allowed due to heat
insulation inside the machine body, double shield plate
and a forced air cooling fan. This enhanced the
durability and service life.
Features IK-92PUMA
Secure and easily adjustable torch holder,
Contra weight for more stability,
Easy handle for switching cutting oxygen,
Travel in both forward and reverse direction,
Circle cutting option 50-550mm radius,
Plate edge roller, (cutting without rail)
Manual guide cutting
Let the machine run only by the drive motor (do
not push or pull the machine) and give the
machine only the direction by the hand. Take
care that the hand actions are done smoothly.
1.
Outside cuts (increase
speed).
2.
Inside cuts (decrease
speed).
3.
Tip.
Circle cutting attachment
This option provides an easy cut of a circles from
100 -1100mm.
Note: Make a deep punch mark on the plate.
Plate edge guide roller
This option make it possible to cut without rail.
The setup with the plate edge roller is different!! Take care that the
IK-92 Puma has a small inclination so that the roller keep pushing
against the plate edge.
Specifications







Cutting thickness:
Cutting speed:
Cutting shape:
Power:
Speed regulator:
Weight:
Machine length
up to 100mm
150 – 1000 mm/min
I, V to 45°
42/110/220V AC
Variable resistor
8 Kg
480mm