Download Item Spec`s Spec`s with Sw DL 3155M12 DIODE APPLICATIONS

Item
DL 3155M12
Spec's
Spec's with Sw
DIODE APPLICATIONS MODULE - didactic equipment - circuits blocks:
clipping circuit, clamping circuit, one half-wave voltage doubler, simple
and double half-wave rectifier, diode bridge rectifier (Graetz bridge)
with capacitive input filter, dual power supply, stabilized power supply theoretical topics: behaviour of the diode inserted in circuits that
enclose generators of variable signals, simple and double clipper circuits,
half-wave voltage doublers, simple half-wave rectifier circuit, double
half-wave rectifier circuit, bridge rectifier circuit, power supplies, filters,
regulators. Fault simulation. It must be possible to perform the following
experiences: Clipping circuits, Clamping circuits, One half wave voltage
doubler, The simple and double half-wave rectifier, Diode bridge
rectifier (Graetz bridge) with capacitive input filter, Dual power supply,
Stabilized power supply. The faults must be inserted by microswitches
mounted on the board; the module must be provided with a EISA BUS
31+18 INTERFACE, connections and test points by 2mm terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.
DIODE APPLICATIONS MODULE - didactic equipment - circuits blocks:
clipping circuit, clamping circuit, one half-wave voltage doubler, simple
and double half-wave rectifier, diode bridge rectifier (Graetz bridge) with
capacitive input filter, dual power supply, stabilized power supply theoretical topics: behaviour of the diode inserted in circuits that enclose
generators of variable signals, simple and double clipper circuits, halfwave voltage doublers, simple half-wave rectifier circuit, double halfwave rectifier circuit, bridge rectifier circuit, power supplies, filters,
regulators. Fault simulation. It must be possible to perform the following
experiences: Clipping circuits, Clamping circuits, One half wave voltage
doubler, The simple and double half-wave rectifier, Diode bridge rectifier
(Graetz bridge) with capacitive input filter, Dual power supply, Stabilized
power supply. The faults must be inserted by software and by
microswitches mounted on the board. The module must be provided with
a EISA BUS 31+18 INTERFACE for connection to power supply and PC,
with a software able to allow the study of theoretical topics through PC
with hyper textual navigation according to the HTML standard.
Connections and test points by 2mm terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.