Download InfiNet Wireless R5000-Ow

InfiNet Wireless R5000-Ow
InfiMESH Family
Unit Description
The R5000-Ow device is comprised of an Outdoor Unit
and an Indoor Unit to be used as MESH/Wi-Fi equipment
to create large area Wi-Fi Hot Zones. Available in
multiple configurations both with single or dual-radio
MESH radios and with an optional high-power 300 mW
Wi-Fi Access Point or with an antenna diversity MESH/WiFi R5000-Ow unit which acts as an ideal, cost-effective
solution for wireless HotZones.
R5000-Ow
-
-
-
Applications
- Providing public access using standard Wi-Fi protocols
- Creating MESH Wi-Fi Hot Zones
- Creating mobile Wi-Fi Hotspots in the vicinity of moving vehicles connected to MESH network
Radio
- Modulation types: OFDM with BPSK, QPSK, QAM16, QAM64
Frequency ranges: 900 MHz,
2.3 - 2.7 GHz, 3.4 - 3.6 GHz,
4.9 - 6.0 GHz
Channel widths supported: 20 MHz, 10 MHz, 5 MHz
Maximal net throughput:
MESH interface capacity:
34 Mbps (54 Mbps, 20 MHz channel width,
no compression)
Dual-radio MESH units available
.
.
Operating frequencies
Output power
Sensitivity
..................................................................................................................................................................................................................................................
2.3 - 2.7 GHz
2.312 - 2.412 GHz
up to 300 mW (25 dBm) for 2.3 - 2.4 GHz
-73 dBm .. - 95 dBm
2.412 - 2.482 GHz
up to 63 mW (18 dBm) for 2.3 - 2.7 GHz
2.507 - 2.702 GHz
................................................................................................................................................................................................................................................. 5-6 GHz 4.950 - 4.990 GHz
up to 63 mW (18 dBm), regular-power modification
-71 dBm .. -95 dBm
5.150 - 5.250 GHz
5.250 - 5.350 GHz
5.470 - 5.725 GHz
5.725 - 5.845 GHz
5.920 - 6.060 GHz
................................................................................................................................................................................................................................................. 3.5 GHz radio
3.300 - 3.450 GHz
up to 200 mW (23 dBm)
-73 dBm .. -92 dBm
3.475 - 3.625 GHz
3.600 - 3.750 GHz
.................................................................................................................................................................................................................................................
900 MHz radio
902 MHz - 928 MHz
up to 300 mW (25 dBm)
-71 dBm .. -95 dBm
InfiNet Wireless MESH Implementation
Self-healing and self-organizing MESH
networks are created using InfiNet
Wireless sophisticated proprietary
architecture, MINT - Mesh
Interconnection Network Technology
MINT technology is capable of forming wireless
and even wired networks with any topology.
MINT will immediately react to any change in
network topology and will automatically adjust
and optimize network parameters accordingly to
these new conditions.
Optimal Path Finding Algorithm:
Ensuring Lowest Latency
MINT features a powerful loop-free shortest path
finding algorithm which takes multiple parameters
of the whole network into consideration and
selects an optimal path for each packet with
smallest latency being a key criterion in choosing
this path. With each link in a MINT network having
a cost, it is calculated according to link's current
load, bitrates, number of re-tries, possibility of
interference, signal levels, overall link stability and
other quality parameters.
.
.
.
.
Radio performance optimization
InfiNet Wireless protocol features various
mechanisms ensuring reliable data transmitting
over radio media:
Autobitrate (dynamic modulation control). This mechanism automatically adjusts TX and RX bitrates for each unit to communicate with each unit's neighbor individually thus providing a reliable and stable connection with no drop-offs.
Polling mechanism which can be enabled in any topology scenarios (also in multi-hop when dual-radio units are used) ensures a collision-free transmitting with a full control of Base Station or MESH repeater capacity.
Unconditional prioritization for time-sensitive traffic (e.g. VoIP and video)
Settings for adjusting minimal and maximal signal level thresholds for connecting neighbors
Built-in 802.11b/g
compatible
Wi-Fi Access Point
Standards
- IEEE 802.11b
- IEEE 802.11g
Security
- 64/128/152-bit WEP
- WPA - Wi-Fi Protected Access
(WPA - TKIP/AES PSK)
- 802.1x (EAP-MD5/TLS/TTLS/PEAP)
- MAC Address Access Control List
Other Features
- 802.11e QoS
- Switching Diversity between Two Antennas
Wireless Frequency Range
- 2.4 - 2.4835 GHz
Radio and Modulation Type
For 802.11b
DBPSK @ 1Mbps
DSSS:
DQPSK @ 2Mbps
CCK @ 5.5 and 11Mbps
.
.
.
For 802.11g
OFDM: BPSK @ 6 and 9Mbps
QPSK @ 12 and 18Mbps
16QAM @ 24 and 36Mbps
64QAM @ 48 and 54Mbps
.
.
.
.
Receiver Sensitivity
- 802.11g: -95..-72 dBm
- 802.11b: -92..-83 dBm
Transmit Output Power
- No antenna diversity:
up to 300 mW (25 dBm)
- Antenna diversity:
up to 120 mW (21 dBm)
Antenna Connection
- 1 x N-type female (300 mW version or 2 x N-type female (antenna diversity version)
Wired Interfaces
- Wired network connection:
Ethernet 10/100BaseT (RJ-45)
- Wired network interface:
IEEE 802.3 CSMA / CD and Ethernet Blue Book
- Serial interface System Console Port
Antenna Connection
- N-type connector for Radio (one or two depending on the model)
-
Radio Interface Features
Superpacketing (voice/RTP aware)
Channel Time Adjustment
DFS (where applicable)
"Long" mode for long distances
Automatic bitrate control
MAC-layer Features
- Proprietary dynamic adaptive polling:
Centralized marker grant mode
Dynamically takes into account low activity of the subscribers
Permanent channel testing
- ARP protocol support
- rSTP/STP protocol support (Spanning Tree Protocol)
- MAC/IP filtering
- Full-fledged 2nd layer switch:
. Multiple switching groups
. Full VLAN support (IEEE 802.1q)
. Trunk groups support
- Pseudo-radio interface support (connecting backhauls via wired interfaces)
.
.
.
.
Networking Features
- RIPv2 / OSPFv2 /static routing
- Tunneling (Ethernet over IP capable)
- IP-Firewall
- NAT (multi-pool, H.323-aware)
- DHCP client/server/relay
- Quality-of-Service:
16 priority queues
IEEE 802.1p support
IP TOS / DiffServ support
Full voice support
Traffic limiting
(absolute, relative, mixed)
Traffic redirection
.
.
.
.
.
.
Security Features
- Over-the-air encryption
- Storm / flood protection
- Password protection
- Protocol messages encryption
Rapid View-1
Form Factor and Dimensions
- Outdoor Unit (ODU):
Dimensions:
240 x 240 x 102 mm
Weight: 4.0 kg
- Indoor CPE (IDU-5000-BS)
Dimensions: 50 x 46 x 23 mm
Weight: 0.3 kg
.
.
.
.
Power
- Up to 25 Watts
- Consumption:
110-240 VAC @ 50/60 Hz
Environmental
- Outdoor Units:
-40..+60C,
100% humidity, condensing
- Indoor Unit:
0..+40C,
95% humidity,
non-condensing
Management Features
- SNMPv1 / SNMPv3 support
(MIB II, private MIB)
- Configurable SNMP Traps
- Telnet
- Graphical User Interface
(for Windows)
- Web-interface Configurator
- Remote Shell
General Features
- Frequency / IP-roaming for CPE between Base Stations
- Automatic over-the-air firmware upgrade
Headquarters
Andrew Razumetz
[email protected]
Tel: +7-499-940-93-50
Europe, Middle East
& Africa Region
Carl Cag
[email protected]
Tel: +44-7753-691-642
Kamal Mokrani
[email protected]
Tel: +44-7802-337-530
Asia Pacific Region
Dmitry Okorokov
[email protected]
Tel: +7-499-940-93-50
Michael Fun
[email protected]
Tel: +60-123-165-167
Latin America Region
Anton Zhuravlev
[email protected]
Tel: +7-499-940-93-50
InfiNet Wireless
Office 731A, “Rumyantsevo” Business-Park, Build 1 / "A", Entrance 4, 7th Floor,
Rumyantsevo Village, Leninsky District, Moscow Region, Russia, 142784
Phone/Fax : +7-499-940-93-50
E-mail
: [email protected]
www.infinetwireless.com