Download ExcelAir® CPE3100

ExcelAir® CPE3100
Fixed Broadband Wireless Access System at 3.5 GHz
Features
•
•
•
•
•
•
•
•
•
•
Integrated transceiver, antenna and modem
Integrated, linearly polarized antenna
Supports Triple Play (data, voice and video)
30 Mbps down; 6 Mbps up per CPE
Up to 255 MAC Addresses per CPE
Flexible band plans
DOCSIS V1.1 technology
Packet-to-packet transmitter muting
Easy install
High transmit EIRP for solid link margin
Description
The CPE3100 is the customer premise equipment (CPE) for the AXXCELERA ExcelAir® fixed wireless access system operating
at 3.5 GHz. The CPE consists of three elements: the iCPE (outdoor unit with integrated transceiver, antenna and modem), the
indoor Network Interface Adapter, and the power supply module.
The iCPE is easy to install on a rooftop or standard antenna mount, and incorporates a compact, 19 dBi flat-panel antenna for
transmitting and receiving the RF signals, a tunable RF transceiver (radio) for performing up and down-conversion of the RF
signals, and the integral modulation equipment. Employing the latest in DOCSIS V1.1 traffic shaping technology, the
ExcelAir®CPE3100 enables simultaneous support of IP-based voice and video solutions, as well as the delivery of rich IP-based
data applications via a IEEE 802.3u standard Ethernet port. This package is lightweight and easy to install, and includes a
comprehensive installation utility. Ease of installation is further assured through an integral RSSI (Receive Signal Strength
Indicator), allowing for visual confirmation of the received signal strength as the unit is positioned and secured, and an automatic
gain setting for both upstream and downstream signals.
The Ethernet cable from the iCPE is connected to the Network Interface Adaptor (NIA) at a convenient location inside the
customer premises. The supplied power module and connectors on the NIA allow connections to customer computers or local
area network equipment. One CPE3100 can thus support many users within a local area network or multiple dwelling/business
unit.
Customer
Computer
Network
iCPE
Network
Interface
Adapter
IP / Ethernet
Optional VoIP
Gateway
Analog Telephone
Equipment
(locally supplied)
IP / Ethernet
POTS
IP / Ethernet & Power
AC Power
120/240 VAC
OR
Power Supply
Module
Axxcelera ● 1590 Buckeye Drive ● Milpitas, CA 95035 ● USA
Tel: +(1) 408.894-0160 ● Fax: + (1) 408.894-9831 ● [email protected];
ExcelAir® CPE3100
Fixed Broadband Wireless Access System at 3.5 GHz
Specifications
TDMA/FDD
Symbol rate, spectrum inversion, forward and return link
frequency, modulation, and transmit power level
RFC 1213, RFC 1493, RFC 2669, RFC 2670, RFC 2674
Reed Solomon
64QAM, 16QAM, QPSK
Access Method
Controllable Physical Layer Parameter
SNMP MIBs Supported
Forward Error Correction
Modulation Supported
Net Channel Efficiency
64QAM
16QAM
QPSK
QoS
Frequency Range
Passband
Tx/Rx Separation
RF Channel Sizes
Antenna Gain
Antenna Polarization
Antenna 3 dB Beam-width
Antenna Pattern Envelope
Receive Threshold Sensitivity (at antenna port)
Transmit Power Dynamic Range (at antenna
port)
Transmit Spectral Mask
RSSI LED Indicators
Operating Temperature Range
Storage Temperature Range
Dimensions and Weight
Network Interface Connector
Down link: 4.6 Bits/sec/Hz Up link: N/A
Down link: 3.0 Bits/sec/Hz Up link: 2.4 Bits/sec/Hz
Down link: 1.5 Bits/sec/Hz Up link: 1.2 Bits/sec/Hz
802.1Q/p and Rate Shaping (Peak Information Rate)
3.4 to 3.6 GHz (see band plans below)
25 MHz min.
100 MHz typ. Paired channel spacing. 50 MHz min. Tx/Rx
guard band
1.75 MHz to 7 MHz
19 dBi (nominal)
Vertical/Horizontal
16° Nominal
TS4 per ETSI 302 085 v1.1.1
-6
-77 dBm for 16QAM at 10 BER in 7 MHz
-71 dBm for 64QAM at 10-6 BER in 7 MHz
[-30, +20] dBm (+25 dBm, P1dB)
ETSI EN 301 021 v1.3.1
7 segment coarse: -10 dB each
8 segment fine: -1.25 dB each
1 segment downstream synchronization
-33° to +55° Celsius (includes solar load)
-45° to + 85° Celsius
14” (w) x 14” (l) x 5” (h)
10 lbs.
Wind loading: 88 lbf @ 125 mph (200 kph)
IEE 802.3u 10/100 Base-T Full/Half Duplex, Auto-MDIX,
Female RJ-45
Band Plans
Dash #
B2
B3
B4
B5
B6
A2
A3
A4
A5
A6
Current
Downstream Frequency (transmit
from base station)
3524-3552 MHz
3550-3578 MHz
3572-3600 MHz
3563-3590 MHz
3499-3531 MHz
Planned
3424-3452 MHz
3450-3478 MHz
3472-3500 MHz
Not Assigned
3399-3431 MHz
Upstream Frequency (receive at
base station)
3424-3452 MHz
3450-3478 MHz
3472-3500 MHz
3463-3490 MHz
3399-3431 MHz
3524-3552 MHz
3550-3578 MHz
3572-3600 MHz
3499-3531 MHz
Please consult the factory for custom band alternatives.
Axxcelera ● 1590 Buckeye Drive ● Milpitas, CA 95035 ● USA
Tel: +(1) 408.894-0160 ● Fax: + (1) 408.894-9831 ● [email protected];