Download WRT550X Designer Switches

WRT550X
Designer Switches
Lighting Control System
DESIGNER SERIES SWITCHES SPECIFICATIONS
WRT5501
Switch (1)
WRT5502
Switch (2)
WRT5503
Switch (3)
WRT5504
Switch (4)
Red: Function activated (On).
Green: Function deactivated
(Off).
⎯ Red and Green: A Timer
function is active.
• Each Switch button can be set to a
user-defined function and address
using the infrared (IR) WRT9500
Address Setting Unit or WRT9600
Address Setting and Programming
Unit:
⎯
⎯
Individual: 0-1 through 63-4. An
address is determined by the
prefix (0 to 63) of the relay
controller and the suffix (1 to 4)
by the relay controller output.
Dimmer On/Off can also be
controlled when using
WRT2040 Transmission Unit.
⎯ Group: G1 through G127.
⎯ Pattern: P1 through P72.
⎯ Dimmer: D1 through D16
(On/Off control only).
• Addressing is easily accomplished
via infrared wireless signals without
removal or disassembly of the switch
from its mounting location.
⎯
General
The WRT5501, WRT5502, WRT5503,
and WRT5504 Designer Series
Switches are input devices that connect
directly to the Nexlight 2-wire bus. They
provide one, two, three, and four buttons
(switch functions), respectively. Each button
may be configured for Individual, Group,
Pattern, or Dimmer (On/Off only) control.
Each WRT550x switch occupies a
single-gang opening.
Features
• Provide one-, two-, three-, and four- switch
operation in a single-gang opening.
• LEDs at each button indicate load status
during operation andprogramming:
• Switches retain all programming with
or without connection to the 2-wire bus.
• Any switch can bbe factory programmed
or programmed in the field.
• Two types of time delay functions
may be programmed into any switch
configured as an Individual, Group,
or Dimmer:
⎯
⎯
Off Delay turns Off the circuit(s)
one-half, one, or five minutes
after switched from On to Off.
On Timer keeps On the
circuit(s) one-half, one, five, 60,
or 120 minutes after the switch
is activated to On, after which
the circuit(s) are automatically
turned Off.
NexLight is a registered tragemark of NORTHPORT ENGINEERING INC., Pub No. 0410.29
Phone: 218.828.3700
www.nexlight.com
Fax: 218.824.1568
WRT550X
Designer Switches
Lighting Control System
• Switches communicate with other
components using the 2-wire signal
bus.
• Switches and switch LEDs are
powered from the 2-wire signal bus
(see mA draw below).
• Multiple switches can control the
same load, group or pattern. LEDs at
all switches show true status of the
load.
• Each switch button may be
individually labeled.
• Matching Wall Plates are available in
one to 5 gangs.
Specifications
Models:
WRT5501 Switch (1) White.
WRT5502 Switch (2) White.
Figure 1.
WRT5503 Switch (3) White.
WRT5504 Switch (4) White.
Number of Switch Functions/Buttons:
WRT5501: 1.
WRT5502: 2.
WRT5503: 3.
WRT5504: 4.
Electrical Inputs:
Signal Voltage: ±24 Vdc, Class II.
Signal Current:
WRT5501: 6 mA.
WRT5502: 8 mA.
WRT5503: 10 mA.
WRT5504: 12 mA.
Weight in lb (kg):
0.132 (0.06).
Dimensions:
See Fig. 1.
WRT5501 Switch (1), WRT5502 Switch (2), WRT5503 Switch (3), and WRT5504 Switch
(4) dimensions in inches (mm).
NexLight is a registered tragemark of NORTHPORT ENGINEERING INC., Pub No. 0410.29
Phone: 218.828.3700
www.nexlight.com
Fax: 218.824.1568