Download Item Spec`s Spec`s with Sw DL 3155E17R POWER SUPPLIES

Item
Spec's
DL 3155E17R POWER SUPPLIES REGULATOR - didactic equipment - circuit blocks:
Spec's with Sw
POWER SUPPLIES REGULATOR - didactic equipment - circuit blocks:
diodes, shunt voltage regulator, variable IC voltage regulator, circuit
diodes, shunt voltage regulator, variable IC voltage regulator, circuit
protect, AC/DC converter, DC/AC converter, switching regulator protect, AC/DC converter, DC/AC converter, switching regulator theoretical topics: diodes circuits, voltage regulator with transistor,
theoretical topics: diodes circuits, voltage regulator with transistor,
variable IC voltage regulator with overload protection, AC/DC
variable IC voltage regulator with overload protection, AC/DC conversion,
conversion, DC/AC conversion, switching regulator. It must be possible
DC/AC conversion, switching regulator. It must be possible to perform the
to perform the following experiences: power supply with single wave
following experiences: power supply with single wave rectifier, power
rectifier, power supply with bridge rectifier, power supply with Zener
supply with bridge rectifier, power supply with Zener diode regulator,
diode regulator, studying shunt regulator without load, studying shunt
studying shunt regulator without load, studying shunt regulator with low
regulator with low current load, studying shunt regulator with high
current load, studying shunt regulator with high current load,
current load, experimenting voltage regulator with different input
experimenting voltage regulator with different input voltage values,
voltage values, experimenting voltage regulator with different load
experimenting voltage regulator with different load values, understanding
values, understanding circuit protection, experimenting with AC/DC
circuit protection, experimenting with AC/DC converter, experimenting
converter, experimenting with DC/AC converter, understanding
with DC/AC converter, understanding switching regulator fault simulation.
switching regulator fault simulation. The faults must be inserted by
The faults must be inserted by software and by microswitches mounted
microswitches mounted on the board; the module must be provided
on the board. The module must be provided with a EISA BUS 31+18
with a EISA BUS 31+18 INTERFACE, connections and test points by 2mm INTERFACE for connection to power supply and PC, with a software able
terminals.
to allow the study of theoretical topics through PC with hyper textual
Dimensions of the module: 297x260mm.
navigation according to the HTML standard. Connections and test points
The module must be supplied with a theoretical and practical manual.
by 2mm terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.