Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Certification - EN 1090 Conformity assessment of steel structures The Construction Product Regulation Certificate The Construction Product Regulation (305/2011/EC), approved by European Parliament and the European Commission, requires CE marking for steel structures, when the product is marketed inside the EU. A Factory Production Control certificate from a notified body can be obtain when: The regulation is, for example, for products with steel and aluminum structures such as; bridges, catwalks, stairs, railings, masts, towers, non-pressurized tanks, silos, pipelines, piling, crane paths and frames of buildings of various kinds. If there is a valid harmonized standard existing for the product when placing the product on the market, the basic characteristics of the products must be presented for CE marking. The harmonized standard for steel structures is EN 1090-1. Affixing the CE marking for the product is subjected to a third party’s (notified body‘s) approval and monitoring of the manufacturer‘s Factory Product Control (FPC). > The notified body finds a company‘s production to be in accordance with the standards EN 1090-1 (conformity assessment) and EN 1090-2 (steel structures, technical requirements) or EN 1090-3 (aluminum structures, technical requirements). > The company has implemented Factory Production Control according to EN 1090-1. Before a product is placed on the market the company must draw up a Declaration of Performance (DoP), according to the Construction Products Regulation. The four steps of the CE marking process FACTORY PRODUC TION CONTROLL ( FPC ) INITIAL INSPECTION RIGHTS FOR CE MARKING DECLARATION OF PERFORMANCE CE MARKING CONTINUOUS SURVEILLANCE OF FACTORY PRODUC TION CONTROL Manufacturer: Notified Body: Manufacturer: Notified Body: > Drawing up the FPC and > Implementation of the FPC > Initial inspection of the FPC > Factory production control certificate > Drawing up the Declaration of Performance (DoP) > Affixing the CE mark > Continuous surveillance of Factory Production Controls Our services DEKRA Industrial Oy We offer Notified Body services to the manufacturer‘s: In addition to the factory production control certification, we also offer inspections and conformity assessments of pressure-, electrical, fire detection and fire extinguishing equipment as well as non-destructive (NDT) and destructive testing of materials (DT). • Initial inspection of the Factory Production Control • Continuous surveillance of the Factory Production Control • Certification of the Factory Production Control. Our contacts for certification • Mari Mikkonen, +358 (0)40 4879 390 • Anssi Rissanen, +358 (0)44 7376 835 DEKRA Industrial Oy is an independent inspection company, part of an international testing and inspection group of companies (DEKRA). More than 200 experts at DEKRA Industrial Oy share the latest knowledge, technology and standards. DEKRA is one of the world‘s leading providers of professional services and works, represented in more than 50 countries around the world. DEKRA have more than 29 000 employees dedicated to ensuring safety, quality and environmental protection. DEKRA Industrial Oy PL 41 FI-01621 VANTAA Puhelin (09) 878 020 www.dekra.fi