Download Divar MR - Bosch Security Systems

July 2010
Americas
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450,
USA
Phone: + 1 800 289 0096
Fax: +1 585 223 9180
[email protected]
www.boschsecurity.us
Europe, Middle East, Africa
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
[email protected]
www.boschsecurity.com
Asia-Pacific
Robert Bosch (SEA) Pte Ltd,
Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2600
Fax: +65 6571 2698
[email protected]
www.boschsecurity.com
Product Guide Specification
Specifier Notes: This product guide specification is written according to the Construction
Specifications Institute (CSI) 3-Part Format, based on MasterFormat 2004 and The Project
Resource Manual—CSI Manual of Practice. The Manufacturer is responsible for technical
accuracy.
The section must be carefully reviewed and edited by the Architect or Engineer to meet the
requirements of the project and local building code. Words and sentences within brackets [ ] are
choices to include or exclude a particular item or statement. Coordinate this section with other
specification sections and the Drawings. Delete all “Specifier Notes” after editing this section.
SECTION 28 23 29
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
BOSCH VIDEOJET [X10] [X20] [X40] SN VIDEO ENCODER
PART 1 – GENERAL
1.1
SUMMARY
A.
Section Includes:
1. Digital Video Recorders and Analog Recording Devices.
B.
Related Sections:
1. Section [28 23 16 – Video Surveillance Monitoring and Supervisory Interfaces].
2. Section [28 23 26 – Video Surveillance Remote Positioning Equipment].
3. Section [28 23 29 – Video Surveillance Remote Devices and Sensors].
2
1.2
REFERENCES
A.
Safety:
1. EU: IEC60950
B.
Australia and New Zealand Standards
1. AS/NZS 3548 Class B
C. EMC Europe:
1. EN55103-1 Video and Audio Equipment
2. EN50130-4 Alarm Systems
3. EN55022 ITE
4. EN55024 ITE
D. Environmental, Europe:
1. EN61000-3-2
2. EN61000-3-3
E.
Federal Communications Commission (FCC) (www.fcc.gov)
1. FCC CFR 47 part 15 class A – Telecommunications – Radio Frequency
Devices – Digital Device Emission.
F.
International Organization for Standardization (ISO) (www.iso.ch):
1. ISO 9001 – Quality Management Systems.
G. Underwriters Laboratories, Inc. (UL):
1. UL60950 -2001 Information technology equipment
1.3
DEFINITIONS
A.
MPEG-4 is a video encoding and compression standard that uses inter-frame
encoding to significantly reduce the size of the video stream being transmitted. This
often provides substantial compression because in many motion sequences, only a
small percentage of the pixels are actually different from one frame to another.
B.
Dual Streaming is a feature that allows users to adjust frame rate, compression
standard, and video resolution for different purposes simultaneously.
C. Multicasting enables the network switch to automatically clone data if multiple
recipients want to view the same data or video.
D. 4CIF resolution is four (4) times higher than that of CIF images, or 704 pixels wide
and 576/480 (PAL/NTSC) pixels tall (704 x 576/480).
Project Name/Project #/6-19-17
28 23 29 - 2
Video Surveillance Remote
Devices and Sensors
3
1.4
SYSTEM DESCRIPTION
A.
Video Surveillance Remote Devices and Sensors:
1. IP Video Encoder
B.
Performance Requirements:
1. As the application requires, the [one (1)] [two (2)] [four (4)] -channel video
encoder specified shall be capable of functioning on data networks, such as
Ethernet LANs and over the Internet.
2. The encoder shall function as a server to provide MPEG-4 or JPEG video via
the network to a PC workstation using a standard Web browser (such as
Microsoft Internet Explorer Version 6.0 or later) as the receiver.
a. The Web browser may be used to control a Bosch or compatible camera
connected to the Ethernet port of the specified encoder.
b. The web browser may also be used to configure the settings of the [one
(1)] [two (2)] [four (4)] -channel video encoder using the local network or via
the Internet.
3. The [one (1)] [two (2)] [four (4)] -channel video encoder specified may be paired
with a compatible receiver such as the Bosch VIP XD video hardware decoder
to create a point-to-point IP-based connection via the network. The MPEG-4
digital video from the specified encoder is converted by the Bosch VIP XD
decoder back to either analog video for display on a standard CCTV analog
monitor or for display on a VGA monitor. The video input(s) to the encoder may
be displayed on the decoder monitor.
4. The video encoder specified shall be capable of transmitting video that can be
viewed over an IP network using the Bosch VIDOS or the Bosch Video
Management System software running on a network workstation.
5. The video encoder shall be capable of sending images to a network video
recorder for long term archiving.
6. The video encoder shall provide a serial interface and alternatively support
Bilinx communication over coax cable.
7. The [one (1)] [two (2)] [four (4)] -channel video encoder shall provide dual
streaming capability that simultaneously creates two data streams per video
input at different rates and resolution where one stream may be used for local
recording and the second stream may be transmitted over the network for live
viewing. (Dual streaming is dependent on the encoder settings, picture content,
the amount of motion within the video, and the available computational power.)
8. The video encoder shall support video streaming as follows:
a. In a unicast function that allows communication between a single sender
and a single receiver via a network.
b. In a multi-unicast mode that supports 5 simultaneously connected receivers
via a network.
c. In multicast video streaming that allows communication between a single
sender and multiple receivers when used in a suitably configured network
using UDP and IGMP protocols.
Project Name/Project #/6-19-17
28 23 29 - 3
Video Surveillance Remote
Devices and Sensors
4
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
The MPEG-4 encoder shall allow selection of the following resolutions
(PAL/NTSC):
704 x 576/480:
4CIF: 25/30 ips *
[704 x 576/480:
4CIF: 12.5/15 ips * (X40 SN with all channels used)]
704 x 288/240:
2CIF: 25/30 ips *
464 x 576/480:
2/3 D1: 25/30 ips *
352 x 576/480:
1/2 D1: 25/30 ips *
352 x 288/240:
CIF: 25/30 ips *
176 x 144/120:
QCIF: 25/30 ips *
* depending on picture content and motion
The internal time/date clocks of the specified product shall be synchronized
from the system computer or every two hours from a network time server (NTP
server). The time synchronization capability ensures that simultaneously
occurring events will display the correct time and date when multiple specified
devices are connected to the same network.
The video encoder shall support the following security options:
a. Three (3) levels of password protection to prevent unauthorized connection
or configuration changes to the unit.
b. 802.1x authentication using a RADIUS server for identification.
c. Secure web browser access with HTTPS using a SSL certificate that is
stored in the unit.
d. Unused access methods can be disabled to reduce risk of unauthorized
access.
The video encoder shall offer built-in MOTION+ video motion detection, an
algorithm based on pixel change and that includes object size filtering
capabilities and sophisticated tamper detection capabilities.
The video encoder shall offer optional (via a separate license) embedded Video
Content Analysis (VCA) based on the Bosch Intelligent Video Analysis (IVA)
algorithm. This algorithm is based on digital imaging technology that uses multilevel image analysis of pixel, texture and motion (trajectory) changes.
[Optionally, the video encoder shall provide independent AES encryption with
128‑bit keys for each communication channel – video, audio, or serial I/O – for
total data protection. This feature may require a separate purchase.]
The video encoder shall provide [one (1)] [two (2)] [four (4)] standard BNC
connectors for connection of the video input sources.
The video encoder shall be compatible with NTSC, PAL, EIA, and CCIR video
sources.
The video encoder shall allow recording to an external USB hard disk drive.
PTZ control of a Bosch or compatible camera connected to the serial interface
port of the specified encoder shall also be available when used with the Bosch
VIDOS software or the Bosch Video Management System software.
The video encoder shall be capable of producing MPEG4 video that is
compatible with the Bosch DiBos 8 Digital Video Recorder.
The video encoder shall be compatible with the Bosch VASA hybrid IP
Integration Software that seamlessly integrates and bridges the Bosch analog
Allegiant matrix switcher/controller system with digital video networks. The
encoder shall convert the Allegiant analog video to MPEG4 video for
transmission via a network to allow either the Allegiant camera video or IP
based video, such as from a Bosch Dinion IP network camera, to be viewed by
an operator with no difference in the displayed video.
Project Name/Project #/6-19-17
28 23 29 - 4
Video Surveillance Remote
Devices and Sensors
5
21. Video clips from the video sequence of any camera input of the encoder
currently being displayed on the browser may be saved on the PC hard drive.
22. The encoder specified shall be provided by the manufacturer complete with
configuration cables, Installation and Operations Manuals, and instructions to
download and install all the required software for the unit’s operation such as
MPEG Active X control, an MPEG viewer, DirectX viewer, etc.
1.5
SUBMITTALS
A.
Submit under provisions of Section [01 33 00.]
B.
Product Data:
1. Manufacturer’s data, operator and installation manuals software programs.
C. Shop Drawings; include:
1. System device locations on architectural floor plans.
2. Full Schematic of system, including wiring information for all devices.
D. Closeout Submittals:
1. [User manual.]
2. [Parts list.]
3. [Connection diagram.]
4. [Installation CD.]
5. [Software license.]
1.6
QUALITY ASSURANCE
A.
Manufacturer:
1. Minimum of [ten (10)] years experience in manufacture and design of electronic
security systems including sophisticated PC-based systems and digital
products.
B.
Manufacturer’s quality system: Registered to ISO 9001:2000 Quality Standard.
C. Installer:
1. Minimum of [five (5)] years experience installing IP CCTV systems.
Project Name/Project #/6-19-17
28 23 29 - 5
Video Surveillance Remote
Devices and Sensors
6
1.7
DELIVERY, STORAGE AND HANDLING
A.
Comply with requirements of Section [01 60 00].
B.
Deliver materials in manufacturer’s original, unopened, undamaged packaging; and
unharmed original identification labels.
C. Protect store materials from environmental and temperature conditions following
manufacturer’s instructions.
D. Handle and operate products and systems according to manufacturer’s instructions
for installation, environmental, mechanical or electrical requirements and within
thermal stress limits.
E.
1.8
1.9
Ensure conformance with operating limitations according to applicable data sheet.
WARRANTY
A.
Provide manufacturer’s warranty covering [three (3)] years for CCTV products to
repair and replace defective equipment.
B.
Exchanges available for product failures.
MAINTENANCE
A.
Make ordering of new equipment for expansions, replacements, and spare parts
available to dealers and end users.
B.
Provide factory direct technical support from 8:00 a.m. to 8:00 p.m. via phone or email, or any time via Web.
1. Provide toll-free numbers to contact customer support.
C. Provide on-site training and on-line training via web.
Project Name/Project #/6-19-17
28 23 29 - 6
Video Surveillance Remote
Devices and Sensors
7
PART 2 – PRODUCTS
2.1
MANUFACTURERS
A.
Acceptable Manufacturer:
[Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 1450, USA
Phone: + 1 800 289 0096
Fax: + 1 585 223 9180
[email protected]
www.boschsecurity.us]
[Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
[email protected]
www.boschsecurity.com]
[Bosch Security Systems Pte Ltd
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2600
Fax: +65 6571 2698
[email protected]
www.boschsecurity.com]
B.
Substitutions: [Not permitted.] [Under provisions of Division 1.]
1. [All proposed substitutions must be approved by the Architect or Engineer
professional.]
2. [Proposed substitutions must provide a line-by-line compliance documentation.]
**********Specifier's note: Select the proper Bosch VideoJet X model on project requirement.
The Bosch VideoJet X10, X20, and X40 contain different number of video inputs.
Project Name/Project #/6-19-17
28 23 29 - 7
Video Surveillance Remote
Devices and Sensors
8
2.2
BOSCH VIDEOJET [X10] [X20] [X40] VIDEO ENCODER
A.
General Description:
1. A [one (1)] [two (2)] [four (4)] –channel, high-performance IP video encoder
designed for use in CCTV systems and whose primary function is to encode
[one] [two] [four] channel(s) of video and control data for transmission over an
IP network to remote CCTV monitors and PCs.
2. Capable of producing two MPEG-4 video streams (dual streaming) per camera
input at the rate of 30 images per second with DVD-quality 4CIF resolution.
(Dual streaming is dependent on the encoder settings, picture content, the
amount of motion within the video, and the available computational power.)
3. Accepts analog video input from [one (1)] [two (2)] [four (4)] fixed or PTZ
cameras and then provides MPEG-4 IP video to the network.
4. Receives control data from the network for control of Bosch or compatible PTZ
cameras.
5. The video encoder shall provide a serial interface and alternatively support
Bilinx communication over coax cable.
6. Stores video data locally on the unit’s CompactFlash card inserted into the
encoder’s CompactFlash input.
7. Contains one (1) USB interfaces.
8. Allows for recording to an external USB hard disk drive.
9. Provides built-in iSCSI support.
10. Supports NTSC, PAL, EIA, and CCIR camera sources.
11. Supports the following security features:
a. Three (3) levels of password protection to prevent unauthorized connection
or configuration changes to the unit.
b. 802.1x authentication using a RADIUS server for identification.
c. Secure web browser access with HTTPS using a SSL certificate that is
stored in the unit.
12. Offers built-in MOTION+ video motion detection, an algorithm based on pixel
change and that includes object size filtering capabilities and sophisticated
tamper detection capabilities.
13. Offers optional (via a separate license) embedded Video Content Analysis
(VCA) based on the Bosch Intelligent Video Analysis (IVA) algorithm. This
algorithm is based on digital imaging technology that uses multi-level image
analysis of pixel, texture and motion (trajectory) changes.
14. Offers optional (via a separate license) independent AES encryption with
128‑bit keys for each communication channel – video, audio, or serial I/O – for
total data protection, in combination with hardware decoder unit or appropriate
software..
15. Accepts a 10–30 VDC power range.
Project Name/Project #/6-19-17
28 23 29 - 8
Video Surveillance Remote
Devices and Sensors
9
B.
Video:
1. Video Compression Standards:
a. MPEG-4
b. M-JPEG
c. JPEG
2. Video Data Rate: 9.6 kbps to 6 Mbps per channel
3. Video resolution and frame rate (PAL/NTSC):
a. 4CIF (704 x 576/480), 25/30 ips
b. [4CIF (704 x 576/480), 12.5/15 ips (VideoJet X40 SN, 4 inputs used)]
c. 2CIF (704 x 288/240), 25/30 ips
d. 2/3 D1 (464 x 576/480), 25/30 ips
e. 1/2 D1 (352 x 576/480), 25/30 ips
f. CIF (352 x 288/240), 25/30 ips
g. QCIF (176 x 144/120), 25/30 ips
4. GOP structure:
a. I
b. IP
5. Overall delay: 120 ms
6. Video In:
a. [VideoJet X10 SN: One (1) BNC connector] [VideoJet X20 SN: Two (2)
BNC connectors] [VideoJet X40 SN: Four (4) BNC connectors]
b. Analog composite (NTSC or PAL)
c. 75 Ohm switchable, 0.7 to 1.2 Vpp
C. Audio:
1. Audio Standard: G.711; 300 Hz to 3.4 kHz
2. Audio Data Rate: 80 kbps at 8 kHz Sampling Rate
3. Line In:
a. [VideoJet X10 SN: mono channel via 3.5 mm stereo jack]
[VideoJet X20 SN: Dual mono channels via 3.5 mm stereo jack]
[VideoJet X40 SN: Dual mono channels via 3.5 mm stereo jack]
b. Signal Line In: 9 kOhm typical, 5.5 Vpp max.
4. Line Out :
a. Mono line output on 3.5 mm stereo jack
b. 3.0 Vpp at 10 kohm / 1.7 Vpp at 16 ohm typical
Project Name/Project #/6-19-17
28 23 29 - 9
Video Surveillance Remote
Devices and Sensors
10
D. Network:
1. Ethernet:
a. 10/100 Base-T
b. Auto-sensing
c. Half/full duplex
d. RJ45
2. Protocols:
a. RTP
b. Telnet
c. UDP
d. TCP
e. IP
f. HTTP
g. HTTPS
h. DHCP
i. IGMP
j. V2/V3
k. ICMP
l. ARP
m. SMTP
n. SNTP
o. SNMP (V1,V2c, , MIB-II)
p. 802.1x
3. Encryption:
a. TLS 1.0
b. SSL
c. [AES (optional)]
E.
Control:
1. Software Update: Flash ROM, remote programmable
2. Configuration: Bosch Configuration Manager or Web browser
F.
Connections
1. CompactFlash: One (1) CF slot for optional standard Type I/II CompactFlash
memory card
2. USB Ports: One (1) USB 2.0 high-speed port
3. Alarm In:
a. Four (4) (non-isolated closure contact type)
b. Maximum activation resistance: 10 ohm
c. Six (6) spring clamp contacts
4. Relay Out:
a. Four (4) connections
b. 30 Vpp
c. 2A
5. COM Port:
a. ClampOne (1) RS232/422/485 port
G. Mechanical
1. Dimensions (H x L x D): 33 x 178 x 142 mm (1.3 x 7.01 x 5.6 in.)
2. Weight: Approximately 0.6 kg (1.3 lb)
Project Name/Project #/6-19-17
28 23 29 - 10
Video Surveillance Remote
Devices and Sensors
11
H. Environmental:
1. Operating Temperature: 0°C to +50°C (32°F to + 122°F) ambient temperature
2. Humidity: 20 to 80% atmospheric humidity, non-condensing
3. Heat Value: [X10 SN: 37 BTU/h max., fully equipped] [X20 SN: 65 BTU/h max.,
fully equipped] [X40: 65 BTU/h max., fully equipped]
PART 3 – EXECUTION
3.1
EXAMINATION
A.
Examine areas to receive devices and notify adverse conditions affecting installation
or subsequent operation.
B.
Do not begin installation until unacceptable conditions are corrected.
C. Non-compliance with security instructions may result in loss of data.
D. Ensure environmental, mechanical and electrical requirements are met.
3.2
PREPARATION
A.
3.3
Protect devices from damage during construction.
INSTALLATION
A.
Install devices in accordance with manufacturer's instruction at locations indicated
on the floor drawings plans.
B.
Perform installation with qualified service personnel.
C. Install devices in accordance with the National Electrical Code or applicable local
codes.
D. Ensure selected location is secure and offers protection from accidental damage.
E.
3.4
Location must provide reasonable temperature and humidity conditions, free from
sources of electrical and electromagnetic interference.
FIELD QUALITY CONTROL
A.
Test proper operation of all video system devices.
1. Communication between recorder and cameras.
2. Independent operation of alarms, and cameras.
B.
Test proper operation of software programs.
C. Determine and report all problems to the manufacturer's customer service
department.
Project Name/Project #/6-19-17
28 23 29 - 11
Video Surveillance Remote
Devices and Sensors
12
D. Determine and report all problems to the manufacturer’s customer service
department.
3.5
3.6
ADJUSTING
A.
Make proper adjustment to video system devices for correct operation in
accordance with manufacturer’s instructions.
B.
Make any adjustment of camera settings to comply with specific customer's need.
DEMOSTRATION
A.
Demonstrate at final inspection that playback of video and storage functions operate
properly.
END OF SECTION
Project Name/Project #/6-19-17
28 23 29 - 12
Video Surveillance Remote
Devices and Sensors