Download The Normal Distribution

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts
no text concepts found
Transcript
The Normal Distribution
Properties of The Normal
Distribution

The curve is bell-shaped with the
highest point over the mean, .
Properties of The Normal
Distribution

The curve is symmetrical about a
vertical line through .
Properties of The Normal
Distribution

The curve approaches the horizontal
axis but never touches or crosses it.
Properties of The Normal
Distribution
–


The transition points between cupping
upward and downward occur
above  +  and  –  .
The Normal Density Function
( x   )2
P( x) 
2 2
e
 2
This formula generates the density curve which
gives the shape of the normal distribution.
The Empirical Rule
Approximately 68% of the data values lie is
within one standard deviation of the mean.
68%

One standard deviation from the mean.
The Empirical Rule
Approximately 95% of the data values lie within
two standard deviations of the mean.
95%
x
Two standard deviations from the mean.
The Empirical Rule
Almost all (approximately 99.7%) of the data
values will be within three standard deviations of
the mean.
99.7%
x
Three standard deviations from the mean.
Application of the Empirical
Rule
The life of a particular type of light bulb is
normally distributed with a mean of 1100
hours and a standard deviation of 100
hours.
What is the probability that a light bulb of
this type will last between 1000 and 1200
hours?
Approximately 68%
Control Chart
a statistical tool to track data over
a period of equally spaced time
intervals or in some sequential
order
Statistical Control
A random variable is in statistical
control if it can be described by
the same probability distribution
when it is observed at successive
points in time.
To Construct a Control Chart
• Draw a center horizontal line at .
• Draw dashed lines (control limits) at
    and   .
• The values of  and  may be target
values or may be computed from past data
when the process was in control.
• Plot the variable being measured using
time on the horizontal axis.
Control Chart





1
2
3
4
5
6
7
Control Chart





1
2
3
4
5
6
7
Out-Of-Control Warning Signals
I
One point beyond the 3 level
II
A run of nine consecutive points on
one side of the center line at
target 
IIIAt least two of three consecutive
points beyond the 2 level on the same
side of the center line.
Probability of a False Alarm
Warning Signal
Probability of false
alarm
I Point beyond 3
0.003
II Nine conscecutive
points on same side of

III At least 2/3 points
beyond 2
0.004
0.004
Is the Process in Control?





1
2
3
4
5
6
7
Is the Process in Control?





1 2 3 4 5 6 7 8 9 10 11 12 13
Is the Process in Control?





1
2
3
4
5
6
7
Is the Process in Control?





1
2
3
4
5
6
7
Related documents